RESUMEN
The development of high-precision insoluble conducting polymer patterns for soft electronics is extremely challenging, mainly because of the incompatibility of the synthesis process with the underlying layers. In this study, a novel transfer-printing method is designed that enables the fabrication of photolithographic insoluble conducting polypyrrole (PPy) electrode patterns on soft substrates with high precision, demonstrating compatibility with various soft organic functional layers. Excellent mechanical stability, good biocompatibility, ultra-smooth surface, and outstanding conformability are observed. The photolithographic PPy electrode patterns, combined with an elastic organic semiconductor and dielectric, produce conformal all-organic transistors with mobility of 1.8 cm2 V-1 s-1. This study paves the way to use insoluble conducting polymers to develop complex, high-density flexible patterns and offers a promising organic electrode for the new-generation soft all-organic electronics.
RESUMEN
Stretchable organic transistors for skin-like biomedical applications require low-voltage operation to accommodate limited power supply and safe concerns. However, most of the currently reported stretchable organic transistors operate at relatively high voltages. Decreasing their operational voltage while keeping the high mobility still remains a key challenge. Here, the study presents a new dielectric design to achieve high-dielectric constant poly(urea-urethane) (PUU) elastomer, by incorporating a flexible small-molecular diamine crosslinking agent 4-aminophenyl disulfide (APDS) into the main chain of (poly (propylene glycol), tolylene 2,4-diiso-cyanate terminated) (PPG-TDI). Compared with commercial elastomers, the PUU elastomer as dielectric of the stretchable organic transistors shows the outstanding advantages including lower surface roughness (0.33 nm), higher adhesion (45.18 nN), higher dielectric constant (13.5), as well as higher stretchability (896%). The PUU dielectric enables the intrinsically stretchable, all-solution-processed organic transistor to operate at a low operational voltage down to -10 V, while preserving a substantial mobility of 1.39 cm2 V-1 s-1. Impressively, the transistor also demonstrates excellent electrical stability under repeated switching of 10 000 cycles, and remarkable mechanical robustness when stretched up to 100%. The work opens up a new molecular engineering strategy to successfully realize low-voltage high-mobility stretchable all-solution-processed organic transistors.
RESUMEN
Inspired by human eyes, the neuromorphic visual system employs a highly efficient imaging and recognition process, which offers tremendous advantages in image acquisition, data pre-processing, and dynamic storage. However, it is still an enormous challenge to simultaneously simulate the structure, function, and environmental adaptive behavior of the human eye based on one device. Here, a multimodal-synergistic-modulation neuromorphic imaging system based on ultraflexible synaptic transistors is successfully presented and firstly simulates the dry eye imaging behavior at the device level. Moreover, important functions of the human visual system in relation to optoelectronic synaptic plasticity, image erasure and enhancement, real-time preprocessing, and dynamic storage are simulated by versatile devices. This work not only simplifies the complexity of traditional neuromorphic visual systems, but also plays a positive role in the publicity of biomedical eye care.
Asunto(s)
Síndromes de Ojo Seco , Plasticidad Neuronal , HumanosRESUMEN
Graphitic carbon nitride (g-C3N4) has received much attention due to its unique characteristics of stable physicochemical features, facile preparation, and inexpensive cost. However, the bulk g-C3N4 has a weak capacity for pollutant degradation and needs to be modified for real application. Therefore, extensive research has been done on g-C3N4, and the discovery of the novel zero-dimensional nanomaterials known as carbon quantum dots (CQDs) provided it with a unique modification option. In this review, the development for the removal of organic pollutants by g-C3N4/CQDs was discussed. Firstly, the preparation of g-C3N4/CQDs were introduced. Then, the application and the degradation mechanism of g-C3N4/CQDs were briefly described. And the discussion of the influencing factors on g-C3N4/CQDs' ability to degrade organic pollutants came in third. Finally, the conclusions of photocatalytic degradation of organic pollutants by g-C3N4/CQDs and future perspectives followed. This review will strengthen the understanding of the photocatalytic degradation of real organic wastewater by g-C3N4/CQDs, including their preparation, application, mechanism, and influencing factors.
RESUMEN
In this work, a floating photocatalyst was constructed by loading g-C3N4@Bi2MoO6@AgI (GBA) nanocomposite on a modified polyurethane sponge via a simple dip-coating method and applied for the inactivation of Microcystis aeruginosa under visible light. GBA ternary photocatalyst was fabricated successfully and the morphology, structure, chemical state, and optical properties were characterized systematically. The floating catalyst achieved near 100% removal efficiency of algae cells under 6 h visible light irradiation and also could be retrieved and used at least three times repeatedly. The influences of various conditions on photocatalytic performance such as loading content of nanoparticles, algae density, and concentration of natural organic matters were also studied, which revealed that the GBA floating catalyst exhibited excellent photocatalytic performance of algae removal under different conditions. Furthermore, the physiological characteristics of algae cells during the photocatalytic process, including cell morphology, membrane permeability, Zeta potential, photosynthetic system, antioxidant system, and the metabolic activity were investigated. Results confirmed that the algae cells were severely damaged during the photocatalytic inactivation and the normal physiological functions were significantly affected, which resulted in the death of algae cells at last. Finally, a possible photocatalytic inactivation mechanism of algae cells was proposed. In summary, GBA floating catalyst can effectively inactivate Microcystis aeruginosa under visible light, which confirmed the high efficiency of the novel photocatalytic algae removal technology. Meanwhile, the recyclable floating material also makes the practical application in eutrophic waters of the algae removal technology possible.
Asunto(s)
Microcystis , Antioxidantes , Bismuto , Catálisis , Luz , Microcystis/química , Molibdeno , PoliuretanosRESUMEN
The development of high-performance and low-cost durable triboelectric nanogenerators (TENGs) is essential for converting mechanical energy into electrical energy. Many organic polymer friction materials used widely have thermal stability problems, which makes TENGs with semiconductors as friction materials stand out. Here, we report a semi-flexible TENG based on metal and TiO2 modified by polyoxometalates (POMs) as pure inorganic friction materials. Six different POMs are firstly selected to modify the friction materials of TENGs, and the output performance of TENGs with different POMs-modified semiconductors and different metals as friction materials are tested. Compared with the unmodified TENGs, the open-circuit voltage (VOC ) of the optimal Ag-K6 P2 Mo18 O62 (P2 Mo18 )/TiO2 TENG device is increased by more than 4 times, which is mainly attributed to the strong electron-accepting and storage capabilities of POMs. This study has demonstrated that TENGs modified by POMs have potential application prospects and provided a new method for increasing the electrical output of TENGs.
RESUMEN
Ultrathin organic thin-film transistors (OTFTs) have received extensive attention due to their outstanding advantages, such as extreme flexibility, good conformability, ultralight weight, and compatibility with low-cost and large-area solution-processed techniques. However, compared with the rigid substrates, it still remains a challenge to fabricate high-performance ultrathin OTFTs. In this study, a high-performance ultrathin 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT) OTFT array is demonstrated via a simple spin-coating method, with mobility as high as 11 cm2 V-1 s-1 (average mobility: 7.22 cm2 V-1 s-1 ), on/off current ratio of over 106 , switching current of >1 mA, and a good yield ratio as high as 100%. The ultrathin thickness at ≈380 nm and the ultralight weight at ≈0.89 g m-2 enable the free-standing OTFTs to imperceptibly adhere onto human skin, and even a damselfly wing without affecting its flying. More importantly, the OTFTs show good electrical characteristics and mechanical stability when conformed onto the curved surfaces and even folded in a book after 100 folding cycles. These results illustrate the broad application potential of this simply fabricated ultrathin OTFT in next-generation electronics such as foldable displays and wearable devices.
RESUMEN
It is very important to obtain a deeper understand of the carrier dynamics for indirect-bandgap multilayer MoS2 and to make further improvements to the luminescence efficiency. Herein, an anomalous luminescence behavior of multilayer MoS2 is reported, and its exciton emission is significantly enhanced at high temperatures. Temperature-dependent Raman studies and electronic structure calculations reveal that this experimental observation cannot be fully explained by a common mechanism of thermal-expansion-induced interlayer decoupling. Instead, a new model involving the intervalley transfer of thermally activated carriers from Λ/Γ point to K point is proposed to understand the high-temperature luminescence enhancement of multilayer MoS2 . Steady-state and transient-state fluorescence measurements show that both the lifetime and intensity of the exciton emission increase relatively to increasing temperature. These two experimental evidences, as well as a calculation of carrier population, provide strong support for the proposed model.
RESUMEN
Despite tremendous potential and urgent demand in high-response low-cost gas identification, the development of gas identification based on a metal oxide semiconductor nanowire/nanobelt remains limited by fabrication complexity and redundant signals. Researchers have shown a multisensor-array strategy with "one key to one lock" configuration. Here, we describe a new strategy to create high-response room-temperature gas identification by employing gas as dielectric. This enables gas discrimination down to the part per billion (ppb) level only based on one pristine single nanobelt transistor, with the excellent average Mahalanobis distance (MD) as high as 35 at the linear discriminant analysis (LDA) space. The single device realizes the selective recognition function of electronic nose. The effect of the gas dielectric on the response of the multiple field-effect parameters is discussed by the comparative investigation of gas and solid-dielectric devices and the studies on trap density changes in the conductive channel. The current work opens up exciting opportunities for room-temperature gas recognition based on the pristine single device.
RESUMEN
A central challenge in molecular electronics is to create electrode pairs separated by only a few nanometers that can accommodate a single molecule of interest to be optically or electrically characterized while residing in the gap. Current techniques for nanogap fabrication are largely based on top-down approaches and often rely on subsequent deposition of molecules into the nanogap. In such an approach, the molecule may bridge the gap differently with each experiment due to variations at the metal-molecule interface. Conversely, chemists can readily synthesize gold nanorods (AuNRs) in aqueous solution. Through controlled end-to-end assembly of the AuNRs into dimers or chains, facilitated via target molecules, they can be used as electrical contacts. In this way, the preparation of AuNR-molecule-AuNR junctions by wet chemical methods may afford a large number of identical devices with little variation in the interface between molecule and electrode (AuNR). In this Account, we highlight recent progress in using chemically synthesized AuNRs as building blocks for molecular electronic applications. We outline the general synthesis and properties of AuNRs and describe the aqueous growth of dimeric AuNR structures from an insulating molecule linked to AuNR precursors (gold seeds). Conjugated, electronically active molecules are typically not soluble under the conditions required for the bottom-up growth of AuNRs. Therefore, we present a strategy that utilizes host-guest chemistry in order to make such π-systems compatible with the AuNR growth procedure. In order to electrically characterize the AuNR-molecule-AuNR constructs, we must transfer them onto a substrate and contact external electrodes. We discuss the implications of using electron-beam lithography for making this contact. In addition, we introduce a novel fabrication approach in which we can grow AuNR nanogap electrodes in situ on prepatterned substrates, thus circumventing post-processing steps that potentially damage the nanogap environment. Due to the inherent optical properties of AuNRs, electromagnetic field enhancement in the nanogaps lets us spectroscopically characterize the molecules via surface-enhanced Raman scattering. We discuss the incorporation of oligopeptides functionalized with acetylene units having uniquely identifiable vibrational modes. This acetylene moiety allows chemical reactions to be performed in the gaps via click chemistry, and the oligopeptide linking platform opens for integration of larger biological components.
RESUMEN
Recently; one-dimensional (1D) nanostructure field-effect transistors (FETs) have attracted much attention because of their potential application in gas sensing. Micro/nanoscaled field-effect sensors combine the advantages of 1D nanostructures and the characteristic of field modulation. 1D nanostructures provide a large surface area-volume ratio; which is an outstanding advantage for gas sensors with high sensitivity and fast response. In addition; the nature of the single crystals is favorable for the studies of the response mechanism. On the other hand; one main merit of the field-effect sensors is to provide an extra gate electrode to realize the current modulation; so that the sensitivity can be dramatically enhanced by changing the conductivity when operating the sensors in the subthreshold regime. This article reviews the recent developments in the field of 1D nanostructure FET for gas detection. The sensor configuration; the performance as well as their sensing mechanism are evaluated.
Asunto(s)
Gases/química , Nanoestructuras/química , Nanotecnología/métodos , Diseño de Equipo/métodos , Transistores ElectrónicosRESUMEN
The realization of high-performance photolithographic coplanar organic thin film transistors (OTFTs) is fundamental to boost cosmically commercial applications of organic electronics. However, photolithographic coplanar OTFTs generally suffer from poor charge injection and therefore poor filed-effect performance. Here, a simple and effective strategy is developed to fabricate photolithographic rugged electrodes, and successfully achieve high-density low-contact-resistance photolithographic coplanar OTFTs. Based on this versatile electrode, the wafer-scale photolithographic rugged electrode can be easily achieved, and the device density of the coplanar OTFTs is as high as 28000 cm-2 . The device shows excellent electrical properties with mobility up to 2.01 cm2 V-1 s-1 and Rc as low as 7.8 kΩ cm, which is superior to all the reported Ag-electrode coplanar OTFTs. This work shows a reliable strategy to reduce the contact resistance of photolithographic coplanar OTFTs and elucidates the effect of injection resistance (Rinj ) and access resistance (Racc ) on coplanar OTFTs.
RESUMEN
With the increasing demand for elastic electronics, as a crucial component, elastic semiconductors have been widely studied. However, there are some issues for the current preparation of elastic semiconductors, such as harsh reaction conditions, low atomic economic utilization, and complicated product separation and purification. Aldehyde-amine polycondensation is an important chemical reaction with the advantages of mild reaction conditions, high atomic-economic efficiency, and easy separation and purification. Herein, intrinsically elastic semiconductors are developed via aldehyde-amine polycondensation, including a semiconducting segment and an elastic segment. The resulting polymer containing 42.62 wt % soft segments exhibits excellent stretchability and mechanical reversibility, especially with a lower modulus. Interestingly, the carrier mobility displays up to 0.04 cm2·V-1·s-1, in the range of the fully conjugated reference polymer (0.1 cm2·V-1·s-1). In brief, this strategy provides important guiding principles for the development of intrinsically elastic polymer semiconductors.
RESUMEN
With the rapid advances in imperceptible and epidermal electronics, the research on ultraflexible organic light-emitting diodes (OLEDs) has become increasingly significant, owing to their excellent flexibility and conformability to the human body. It is highly desirable to develop submicrometer-thick ultraflexible OLEDs to enable the devices to seamlessly conform to the surface of arbitrary-shaped objects and still function properly. However, it remains a huge challenge for currently reported OLEDs due to the lack of an appropriate stripping strategy. Here, for the first time, we develop a facile photoregulated stripping strategy for the fabrication of high-performance ultraflexible OLEDs with submicron thickness. Under ultraviolet (UV) irradiation, the surface adhesion force of the ultrathin photopolymer membrane can be adjusted from 16.9 to 5.1 N/m, thereby effectively controlling the laminating and detaching process. Based on this strategy, the resultant device thickness is as low as 0.821 µm, which is the lowest record among flexible OLEDs reported to date. More remarkably, excellent electrical properties with a maximum current efficiency (CE) of 62.5 cd/A, an external quantum efficiency (EQE) of 17.8%, and a low turn-on voltage of 2.5 V are realized, which are superior to almost all of the reported ultraflexible OLEDs with thicknesses below 10 µm. Based on versatile ultraflexible OLEDs, all-organic and skin-mounted displays are successfully realized by employing a conformable organic thin-film transistor (OTFT) as the driver. This work offers a feasible strategy for advancing OLEDs from flexible to ultraflexible, showing significant application potential in future epidermal electronics and conformal displays.
RESUMEN
Vertically stacked all-organic active-matrix organic light-emitting diodes are promising candidates for high-quality skin-like displays due to their high aperture ratio, extreme mechanical flexibility, and low-temperature processing ability. However, these displays suffer from process interferences when interconnecting functional layers made of all-organic materials. To overcome this challenge, we present an innovative integration strategy called "discrete preparation-multilayer lamination" based on microelectronic processes. In this strategy, each functional layer was prepared separately on different substrates to avoid chemical and physical damage caused by process interferences. A single interconnect layer was introduced between each vertically stacked functional layer to ensure mechanical compatibility and interconnection. Compared to the previously reported layer-by-layer preparation method, the proposed method eliminates the need for tedious protection via barrier and pixel-defining layer processing steps. Additionally, based on active-matrix display, this strategy allows multiple pixels to collectively display a pattern of "1" with an aperture ratio of 83%. Moreover, the average mobility of full-photolithographic organic thin-film transistors was 1.04 cm2 V-1 s-1, ensuring stable and uniform displays. This strategy forms the basis for the construction of vertically stacked active-matrix displays, which should facilitate the commercial development of skin-like displays in wearable electronics.
RESUMEN
Developing highly active materials that efficiently utilize solar spectra is crucial for photocatalysis, but still remains a challenge. Here, we report a new donor-acceptor (D-A) covalent organic framework (COF) with a wide absorption range from 200 nm to 900 nm (ultraviolet-visible-near infrared light). We find that the thiophene functional group is accurately introduced into the electron acceptor units of TpDPP-Py (TpDPP: 5,5'-(2,5-bis(2-ethylhexyl)-3,6-dioxo-2,3,5,6-tetrahydropyrrolo [3,4-c]pyrrole-1,4-diyl)bis(thiophene-2-carbaldehyde), Py: 1,3,6,8-tetrakis(4-aminophenyl)pyrene) COFs not only significantly extends its spectral absorption capacity but also endows them with two-photon and three-photon absorption effects, greatly enhancing the utilization rate of sunlight. The selective coupling of benzylamine as the target reactant is used to assess the photocatalytic activity of TpDPP-Py COFs, showing high photocatalytic conversion of 99% and selectivity of 98% in 20 min. Additionally, the TpDPP-Py COFs also exhibit the universality of photocatalytic selective coupling of other imine derivatives with ~100% conversion efficiency. Overall, this work brings a significant strategy for developing COFs with a wide absorption range to enhance photocatalytic activity.
RESUMEN
Polarization is one of the fundamental properties of light, which has a wide range of applications and is developing rapidly. To meet the needs of polarization detection, different types of polarization instruments came into being. The precision of the polarization detection instruments is vital to the result analysis. In this paper, a full polarization imager is designed, and the radiometric calibration and polarization calibration of this instrument are studied. In radiometric calibration, the different numbers lights are set to verify the light intensity response of the imager. The mathematical model was constructed for numerical fitting, and the correlation between the fitted values and the measured values in the 490 nm, 550 nm, and 670 nm bands was above 0.99. Fixed the radiance of the integrating sphere, and adjusted exposure times. The correlation of the three bands is above 0.99, which verifies that the radiative stability of the imager is good. The polarimetric calibration system adopts the adjustable degree of polarization reference light source (APOL). The theoretical and measured values of the degree of polarization of reference light sources in three different bands are analyzed. The results show that the measurement accuracy of the 490 nm band is less than 2%. The precision of polarization measurement in the 550 nm band is less than 1.5%, and the precision of polarization calibration in the 670 nm band is less than 1%. The imager is verified to have high polarization calibration accuracy and meets the requirements of high-precision polarization detection.
RESUMEN
The use of cost-effective renewable raw materials to develop electronic devices has been strongly demanded for sustainable and biodegradable green electronics. Here, by taking inspiration from the traditional calligraphy and kirigami/origami arts, we show a novel cuttable and foldable all-paper touch-temperature sensors fabricated by simply brushing the carbon black ink onto the cellulose paper followed by a layer-layer lamination strategy. The use of environmentally friendly common commodities in daily life including carbon black ink and cellulose paper as the main component materials of sensors effectively lowers the cost and has positive impacts on the environment and health. The sensors can be freely cut or folded into the targeted shapes and can even reversibly morph between 2D and 3D configurations without affecting device function. Additionally, the sensors show a discrimination capability toward pressure and temperature. Our fabrication strategy provides a promising approach for creating the low-cost eco-friendly sensors with a versatile pattern design and a morphing shape without sacrificing the global structural integrity and device functionality.
RESUMEN
Harmful algae blooms (HABs), caused by severe eutrophication and extreme weather, have spread all over the world, posing adverse effects on eco-environment and human health. Microcystis aeruginosa is the dominant harmful cyanobacterial species when HABs occur, and the toxic metabolites produced by it, microcystins, are even fatal to humans. Photocatalytic technology has received wide attention from researchers for its clean and energy-efficient features, while the basic mechanisms and modification methods of photocatalysts have also been widely reported. In recent years, photocatalytic technology has shown great promise in the inhibition of HABs. In this article, we systematically reviewed the progress in photocatalytic performance and algae removal efficiency, discuss the damage mechanisms of photocatalysts for algae removal, including physical damage and various oxidative stresses, and also explore the degradation rates and possible pathways of microcystins. It can be concluded that during the photocatalytic process, the cytoarchitectural integrity of algae cells was damaged, a variety of important protein and enzyme systems were disrupted, and the antioxidant systems collapsed due to the continuous attack of ROS, which adversely affected the normal physiological activities and growth, resulting in the inactivation of algae cells. Moreover, photocatalysts have a degrading effect on microcystins, thus reducing the adverse effects of HAB. Finally, a brief summary of future research priorities regarding the photocatalytic degradation of algae cells is presented. This study helps to enhance the understanding of the destruction mechanism of Microcystis aeruginosa during the photocatalytic process, and provides a reference for the photodegradation of HAB in water bodies.
Asunto(s)
Microcystis , Humanos , Microcystis/metabolismo , Microcistinas/metabolismo , Floraciones de Algas Nocivas , Antioxidantes/metabolismo , Estrés OxidativoRESUMEN
Intrinsically stretchable gas sensors possess outstanding advantages in seamless conformability and high-comfort wearability for real-time detection toward skin/respiration gases, making them promising candidates for health monitoring and non-invasive disease diagnosis and therapy. However, the strain-induced deformation of the sensitive semiconductor layers possibly causes the sensing signal drift, resulting in failure in achievement of the reliable gas detection. Herein, a surprising result that the stretchable organic polymers present a universal strain-insensitive gas sensing property is shown. All the stretchable polymers with different degrees of crystallinity, including indacenodithiophene-benzothiadiazole (PIDTBT), diketo-pyrrolo-pyrrole bithiophene thienothiophene (DPPT-TT) and poly[4-(4,4-dihexadecyl-4H-cyclopenta[1,2-b:5,4-b']dithiophen-2-yl)-alt-[1,2,5]thiad-iazolo [3,4-c] pyridine] (PCDTPT), show almost unchanged gas response signals in the different stretching states. This outstanding advantage enables the intrinsically stretchable devices to imperceptibly adhere on human skin and well conform to the versatile deformations such as bending, twisting, and stretching, with the highly strain-stable gas sensing property. The intrinsically stretchable PIDTBT sensor also demonstrates the excellent selectivity toward the skin-emitted trimethylamine (TMA) gas, with a theoretical limit of detection as low as 0.3 ppb. The work provides new insights into the preparation of the reliable skin-like gas sensors and highlights the potential applications in the real-time detection of skin gas and respiration gas for non-invasive medical treatment and disease diagnosis.