Crystalline C3N3H3 tube (3,0) nanothreads.

Carbon nanothread (CNTh) is a "one-dimensional diamond polymer" that combines high tensile strength and flexibility, but it severely suffers from intrathread disorder. Here, by modifying the reactivity and the stacking ordering of the aromatic precursor, crystalline C3N3H3 CNTh with perfect hexagonal orientation and stacking was synthesized at 10.2 GPa and 573 K from s-triazine. By Rietveld refinement of X-ray diffraction data, gas chromatography mass spectrometry investigation, and theoretical calculation, we found that synthesized CNTh has a tube (3,0) structure, with the repeating s-triazine residue connected solely by C­N bonds along the thread. A "peri-cage" reaction, the concerted bonding between six C and N atoms, instead of [4 + 2] or [1,4] addition reactions, was concluded for the formation of CNThs, and the critical bonding distance between the nearest intermolecular C and N was ∼2.9 Å. The formation of a "structure-specific" crystalline CNTh with C and N orderly distributed highlighted the importance of reaction selectivity and stacking order of reactant molecules, which have great significance for understanding the polymerization of aromatic molecules under high pressure and developing new crystalline CNThs.

Low-loss tantalum pentoxide photonics with a CMOS-compatible process.

We report a Ta2O5 photonic platform with a propagation loss of 0.49 dB/cm at 1550 nm, of 0.86 dB/cm at 780 nm, and of 3.76 dB/cm at 2000 nm. The thermal bistability measurement is conducted in the entire C-band for the first time to reveal the absorption loss of Ta2O5 waveguides, offering guidelines for further reduction of the waveguide loss. We also characterize the Ta2O5 waveguide temperature response, which shows favorable thermal stability. The fabrication process temperature is below 350°C, which is friendly to integration with active optoelectronic components.

DeepHLAPred: a deep learning-based method for non-classical HLA binder prediction.

Human leukocyte antigen (HLA) is closely involved in regulating the human immune system. Despite great advance in detecting classical HLA Class I binders, there are few methods or toolkits for recognizing non-classical HLA Class I binders. To fill in this gap, we have developed a deep learning-based tool called DeepHLAPred. The DeepHLAPred used electron-ion interaction pseudo potential, integer numerical mapping and accumulated amino acid frequency as initial representation of non-classical HLA binder sequence. The deep learning module was used to further refine high-level representations. The deep learning module comprised two parallel convolutional neural networks, each followed by maximum pooling layer, dropout layer, and bi-directional long short-term memory network. The experimental results showed that the DeepHLAPred reached the state-of-the-art performanceson the cross-validation test and the independent test. The extensive test demonstrated the rationality of the DeepHLAPred. We further analyzed sequence pattern of non-classical HLA class I binders by information entropy. The information entropy of non-classical HLA binder sequence implied sequence pattern to a certain extent. In addition, we have developed a user-friendly webserver for convenient use, which is available at http://www.biolscience.cn/DeepHLApred/ . The tool and the analysis is helpful to detect non-classical HLA Class I binder. The source code and data is available at https://github.com/tangxingyu0/DeepHLApred .

Ordered Van der Waals Hetero-nanoribbon from Pressure-Induced Topochemical Polymerization of Azobenzene.

Pressure-induced topochemical polymerization of molecular crystals with various stackings is a promising way to synthesize materials with different co-existing sub-structures. Here, by compressing the azobenzene crystal containing two kinds of intermolecular stacking, we synthesized an ordered van der Waals carbon nanoribbon (CNR) heterostructure in one step. Azobenzene polymerizes via a [4 + 2] hetero-Diels-Alder (HDA) reaction of phenylazo-phenyl in layer A and a para-polymerization reaction of phenyl in layer B at 18 GPa, as evidenced by in situ Raman and IR spectroscopies, X-ray diffraction, as well as gas chromatography-mass spectrometry and the solid-state nuclear magnetic resonance of the recovered products. The theoretical calculation shows that the obtained CNR heterostructure has a type II (staggered) band gap alignment. Our work highlights a high-pressure strategy to synthesize bulk CNR heterostructures.

Deep6mAPred: A CNN and Bi-LSTM-based deep learning method for predicting DNA N6-methyladenosine sites across plant species.

DNA N6-methyladenine (6mA) is a key DNA modification, which plays versatile roles in the cellular processes, including regulation of gene expression, DNA repair, and DNA replication. DNA 6mA is closely associated with many diseases in the mammals and with growth as well as development of plants. Precisely detecting DNA 6mA sites is of great importance to exploration of 6mA functions. Although many computational methods have been presented for DNA 6mA prediction, there is still a wide gap in the practical application. We presented a convolution neural network (CNN) and bi-directional long-short term memory (Bi-LSTM)-based deep learning method (Deep6mAPred) for predicting DNA 6mA sites across plant species. The Deep6mAPred stacked the CNNs and the Bi-LSTMs in a paralleling manner instead of a series-connection manner. The Deep6mAPred also employed the attention mechanism for improving the representations of sequences. The Deep6mAPred reached an accuracy of 0.9556 over the independent rice dataset, far outperforming the state-of-the-art methods. The tests across plant species showed that the Deep6mAPred is of a remarkable advantage over the state of the art methods. We developed a user-friendly web application for DNA 6mA prediction, which is freely available at http://106.13.196.152:7001/ for all the scientific researchers. The Deep6mAPred would enrich tools to predict DNA 6mA sites and speed up the exploration of DNA modification.

The Jinggangmycin-induced Mthl2 gene regulates the development and stress resistance in Nilaparvata lugens Stål (Hemiptera: Delphacidae).

Methuselah (Mth) belongs to the GPCR family B, which regulates various biological processes and stress responses. The previous transcriptome data showed jinggangmycin (JGM)-induced Mthl2 expression. However, its detailed functional role remained unclear in brown planthopper, Nilaparvata lugens Stål. In adult N. lugens, the Mthl2 gene showed dominant expressions, notably in ovaries and fat body tissues. The 3rd instar nymphs treated with JGM increased starvation, oxidative stress, and high temperature (34 °C) tolerance of the adults. On the contrary, under dsMthl2 treatment, completely opposite phenotypes were observed. The lipid synthesis genes (DGAT1and PNPLA3) of both females and males treated with JGM in the nymphal stage were observed with high expressions, while the lipolysis of the Lipase 3 gene was observed with low expressions. The JGM increased triglyceride (TG) content, fat body droplet size, and the number of fat body droplets. The same treatment also increased the Glutathione S-transferase (GST), catalase (CAT), and superoxide dismutase (SOD) activities. An increase in the heat shock protein (HSP70 and HSP90) expression levels was also observed under JGM treatment but not dsMthl2. The current study demonstrated the influential role of the Mthl genes, particularly the Mthl2 gene, in modulating the growth and development and stress-responsiveness in N. lugens. Thus, providing a platform for future applied research programs controlling N. lugens population in rice fields.

From Biomass to Functional Crystalline Diamond Nanothread: Pressure-Induced Polymerization of 2,5-Furandicarboxylic Acid.

2,5-Furandicarboxylic acid (FDCA) is one of the top-12 value-added chemicals from sugar. Besides the wide application in chemical industry, here we found that solid FDCA polymerized to form an atomic-scale ordered sp3-carbon nanothread (CNTh) upon compression. With the help of perfectly aligned π-π stacked molecules and strong intermolecular hydrogen bonds, crystalline poly-FDCA CNTh with uniform syn-configuration was obtained above 11 GPa, with the crystal structure determined by Rietveld refinement of the X-ray diffraction (XRD). The in situ XRD and theoretical simulation results show that the FDCA experienced continuous [4 + 2] Diels-Alder reactions along the stacking direction at the threshold C···C distance of ∼2.8 Å. Benefiting from the abundant carbonyl groups, the poly-FDCA shows a high specific capacity of 375 mAh g-1 as an anode material of a lithium battery with excellent Coulombic efficiency and rate performance. This is the first time a three-dimensional crystalline CNTh is obtained, and we demonstrated it is the hydrogen bonds that lead to the formation of the crystalline material with a unique configuration. It also provides a new method to move biomass compounds toward advanced functional carbon materials.

Rapid and Specific Enhanced Luminescent Switch of Aniline Gas by MOFs Assembled from a Planar Binuclear Cadmium(II) Metalloligand.

Due to the low vapor pressure of aniline, it is challenging to develop a specific rapid fluorescence detection material for low concentrations of aniline gas, which is suspected to result in carcinogenicity when people are exposed by ingestion, inhalation, and skin contact. Herein, the easy-preparing Schiff base ligands were employed to construct the binuclear cadmium(II) compounds featuring a good plane and fine luminescent property, and then, the end groups were changed, making the compounds metalloligands to further build the 3D metal-organic frameworks (MOFs), named MECS-2. It is found that MECS-2 can achieve specific luminescent enhancement response for aniline gas. Furthermore, a large-scale MECS-2a film could be easily prepared by electrospinning nanoMECS-2, which presents the highly efficient and visual detection for aniline gas with the luminescent enhancement effect up to 20 times and good repeatability. Our work provides a good example for the efficient construction of MOF-based films with the fluorescence detection function for organic aromatic gases.

Phase transition and chemical reactivity of 1H-tetrazole under high pressure up to 100 GPa.

The pressure-induced phase transition and polymerization of nitrogen-rich molecules are widely focused on due to their extreme importance for the development of green high-energy-density materials. Here, we present a study of the phase-transition behaviour and chemical reaction of 1H-tetrazole up to 100 GPa using in situ Raman, IR, X-ray diffraction, neutron diffraction techniques and theoretical calculations. A phase transition above 2.6 GPa was identified and the high-pressure structure was determined with one molecule in a unit cell instead of two molecules as reported before. The 1H-tetrazole polymerized reversibly below 100 GPa, probably through carbon-nitrogen bonding instead of nitrogen-nitrogen bonding. Our studies update the structure model of the high-pressure phase of 1H-tetrazole, and present the possible intermolecular bonding route for the first time, which gives new insights to understand the phase transition and chemical reaction of nitrogen-rich compounds, and is of benefit for designing new high-energy-density materials.

Distance-Selected Topochemical Dehydro-Diels-Alder Reaction of 1,4-Diphenylbutadiyne toward Crystalline Graphitic Nanoribbons.

Solid-state topochemical polymerization (SSTP) is a promising method to construct functional crystalline polymeric materials, but in contrast to various reactions that happen in solution, only very limited types of SSTP reactions are reported. Diels-Alder (DA) and dehydro-DA (DDA) reactions are textbook reactions for preparing six-membered rings in solution but are scarcely seen in solid-state synthesis. Here, using multiple cutting-edge techniques, we demonstrate that the solid 1,4-diphenylbutadiyne (DPB) undergoes a DDA reaction under 10-20 GPa with the phenyl as the dienophile. The crystal structure at the critical pressure shows that this reaction is "distance-selected". The distance of 3.2 Å between the phenyl and the phenylethynyl facilitates the DDA reaction, while the distances for other DDA and 1,4-addition reactions are too large to allow the bonding. The obtained products are crystalline armchair graphitic nanoribbons, and hence our studies open a new route to construct the crystalline carbon materials with atomic-scale control.

Pressure-Induced Diels-Alder Reactions in C6 H6 -C6 F6 Cocrystal towards Graphane Structure.

Pressure-induced polymerization (PIP) of aromatics is a novel method for constructing sp3 -carbon frameworks, and nanothreads with diamond-like structures were synthesized by compressing benzene and its derivatives. Here by compressing a benzene-hexafluorobenzene cocrystal (CHCF), H-F-substituted graphane with a layered structure in the PIP product was identified. Based on the crystal structure determined from the in situ neutron diffraction and the intermediate products identified by gas chromatography-mass spectrum, we found that at 20 GPa CHCF forms tilted columns with benzene and hexafluorobenzene stacked alternatively, and leads to a [4+2] polymer, which then transforms to short-range ordered H-F-substituted graphane. The reaction process involves [4+2] Diels-Alder, retro-Diels-Alder, and 1-1' coupling reactions, and the former is the key reaction in the PIP. These studies confirm the elemental reactions of PIP of CHCF for the first time, and provide insight into the PIP of aromatics.

CYP303A1 regulates molting and metamorphosis through 20E signaling in Nilaparvata lugens Stål (Hemiptera: Delphacidae).

Cytochrome P450s play a crucial role in the breakdown of external substances and perform important activities in the hormone system of insects. It has been understood that P450s were essential in the metabolism of ecdysteroids. CYP303A1 is a highly conserved CYP in most insects, but its specific physiological functions remain poorly understood in Nilaparvata lugens Stål. In this study, NlCYP303A1 was identified and highly expressed in the pre-molt stages, predominantly in the cuticle-producing tissues. Silencing of NlCYP303A1 caused a lethal phenotype with a molting defect. Moreover, the 20E titers, the expression levels of Halloween genes, and critical genes associated with the 20E signaling pathway in N. lugens nymphs were significantly decreased with the silencing NlCYP303A1. We further performed additional backfilling of 20E to rescue the RNAi effects on NlCYP303A1. The gene expression levels that were previously reduced caused by silencing NlCYP303A1 were significantly elevated. However, the molting defects of nymphs were not effectively improved. The results demonstrated NlCYP303A1 plays a crucial role in the molting and metamorphosis of N. lugens by regulating the 20E signaling pathway and cuticular formation, enhances the understanding of the functional role of CYP 2 clans, and identifies candidate gene for RNAi-based control of N. lugens.

Pharmacokinetic and safety profiles of mesalazine enema in healthy Chinese subjects: A single- and multiple-dose study.

Mesalazine is a well-established treatment for ulcerative colitis by oral or topical administration. However, the pharmacokinetic (PK) and safety profiles of mesalazine administered by an enema has not been clarified in Chinese population. We conducted an open-label study to assess the PK and safety profiles of mesalazine in 11 healthy Chinese subjects after receiving mesalazine enema (1 g/100 mL) once daily for 7 consecutive days. Blood and urine samples were collected for assay of mesalazine and N-acetyl mesalazine by liquid chromatography-tandem mass spectrometry. The PK and safety data were summarized using descriptive statistics. The mean (standard deviation) maximum plasma concentration (Cmax), area under plasma drug concentration-time curve from time 0 to the last measurable plasma concentration time point (AUC0-t) and elimination half-life (t1/2) of mesalazine were 1007.64 (369.00) ng/mL, 9608.59 (3533.08) h·ng/mL and 3.33 (1.99) h, respectively after the first dose administration. In multiple-dose study, the estimated accumulation factor of mesalazine was 1.09. The cumulative urinary excretion rate of parent and major metabolite of mesalazine was 27.77%. After the last doe administration, 2.21% of the administered dose was excreted as mesalazine and 24.47% as N-acetyl mesalazine in urine within 24 h. Overall, 9 adverse events (AEs) were reported in 4 of the 11 subjects (36.4%), including oral ulcer, toothache, upper respiratory tract infection (1 each) and laboratory abnormalities (6 cases). All AEs were mild and recovered spontaneously without treatment, and were not considered as related to mesalazine. Mesalazine enema (1 g/100 mL) was safe and well tolerated in healthy Chinese subjects. These findings support further clinical trials in Chinese patients. Trial registration: This trial was registered to Chinese Clinical Trial Registry (ChiCTR) at https://www.chictr.org.cn (registration number: ChiCTR2300073148).

LangMoDHS: A deep learning language model for predicting DNase I hypersensitive sites in mouse genome.

DNase I hypersensitive sites (DHSs) are a specific genomic region, which is critical to detect or understand cis-regulatory elements. Although there are many methods developed to detect DHSs, there is a big gap in practice. We presented a deep learning-based language model for predicting DHSs, named LangMoDHS. The LangMoDHS mainly comprised the convolutional neural network (CNN), the bi-directional long short-term memory (Bi-LSTM) and the feed-forward attention. The CNN and the Bi-LSTM were stacked in a parallel manner, which was helpful to accumulate multiple-view representations from primary DNA sequences. We conducted 5-fold cross-validations and independent tests over 14 tissues and 4 developmental stages. The empirical experiments showed that the LangMoDHS is competitive with or slightly better than the iDHS-Deep, which is the latest method for predicting DHSs. The empirical experiments also implied substantial contribution of the CNN, Bi-LSTM, and attention to DHSs prediction. We implemented the LangMoDHS as a user-friendly web server which is accessible at http:/www.biolscience.cn/LangMoDHS/. We used indices related to information entropy to explore the sequence motif of DHSs. The analysis provided a certain insight into the DHSs.

Pressure-Induced Hydrogen Transfer in 2-Butyne via a Double CH···π Aromatic Transition State.

Hydrogen transfer (H-transfer) is an important elementary reaction in chemistry and bioscience. It is often facilitated by the hydrogen bonds between the H-donor and acceptor. Here, at room temperature and high pressure, we found that solid 2-butyne experienced a concerted two-in-two-out intermolecular CH···π H-transfer, which initiated the subsequent polymerization. Such double H-transfer goes through an aromatic Hückel six-membered ring intermediate state via intermolecular CH···π interactions enhanced by external pressure. Our work shows that H-transfer can occur via the CH···π route in appropriate conformations under high pressure, which gives important insights into the H-transfer in solid-state hydrocarbons.

Rehabilitation therapy outside of the hospital via the Internet combined with suggestive psychological intervention in patients with trigeminal neuralgia.

OBJECTIVE: To explore the effect of rehabilitation therapy outside of the hospital via the Internet combined with suggestive psychological intervention on the mental state, sleep quality, self-rehabilitation, and psychological resilience of patients with trigeminal neuralgia. METHODS: A total of 90 patients with trigeminal neuralgia in our hospital from May 2018 to December 2019 were selected and divided into a control group and an observation group according to different nursing methods. The control group (n=45) was given the conventional nursing intervention, and the observation group (n=45) was given the rehabilitation therapy outside of the hospital via the Internet combined with suggestive psychological intervention. The mental state, sleep quality, self-rehabilitation, psychological resilience and compliance rate of the two groups before and after care were compared. RESULTS: After care, the SAS and SDS scores of the observation group were lower than those of the control group (P<0.05). After care, the VAS score and PSQI score of the observation group were lower than those of the control group (P<0.05). After care, the scores of self-care responsibility, self-concept, self-care skills, and health knowledge in the ES-CA scales of two groups and the total score were significantly increased, and the observation group was higher than the control group (P<0.05). After care, the scores of optimism, self-improvement, and resilience in the CD-RISC scales of the two groups and their total scores were significantly increased, and the observation group was higher than the control group (P<0.05). The compliance rate of the observation group was 95.23%, which was significantly higher than 76.19% of the control group (P<0.05). CONCLUSION: Rehabilitation therapy outside of the hospital combined with suggestive psychological intervention via Internet is a promising method for trigeminal neuralgia recovery.

Scalable High-Pressure Synthesis of sp2-sp3 Carbon Nanoribbon via [4 + 2] Polymerization of 1,3,5-Triethynylbenzene.

Pressure-induced polymerization of aromatics is an effective method to construct extended carbon materials, including the diamond-like nanothread and graphitic structures, but the reaction pressure of phenyl is typically around 20 GPa and too high to be applied for large-scale preparation. Here by introducing ethynyl to phenyl, we obtained a sp2-sp3 carbon nanoribbon structure by compressing 1,3,5-triethynylbenzene (TEB), and the reaction pressure of phenyl was successfully decreased to 4 GPa, which is the lowest reaction pressure of aromatics at room temperature. Using experimental and theoretical methods, we figured out that the ethynylphenyl of TEB undergoes [4 + 2] dehydro-Diels-Alder (DDA) reaction with phenyl upon compression at an intermolecular C···C distance above 3.3 Å, which is much longer than those of benzene and acetylene. Our research suggested that the DDA reaction between ethynylphenyl and phenyl is a promising route to decrease the reaction pressure of aromatics, which allows the scalable high-pressure synthesis of nanoribbon materials.

Pressure Gradient Squeezing Hydrogen out of MnOOH: Thermodynamics and Electrochemistry.

Pressure of gigapascal (GPa) is a robust force for driving phase transitions and chemical reactions with negative volume change and is intensely used for promoting combination/addition reactions. Here, we find that the pressure gradient between the high-pressure region and the ambient-pressure environment in a diamond anvil cell is an even stronger force to drive decomposition/elimination reactions. A pressure difference of tens of GPa can "push" hydrogen out from its compounds in the high-pressure region to the environment. More importantly, in transition metal hydroxides such as MnOOH, the protons and electrons of hydrogen can even be separated via different conductors, pushed out by the high pressure, and recombine outside under ambient conditions, producing continuous current. A pressure-gradient-driven battery is hence proposed. Our investigation demonstrated that a pressure gradient is a special and powerful force to drive decomposition and electrochemical reactions.

Crystalline Fully Carboxylated Polyacetylene Obtained under High Pressure as a Li-Ion Battery Anode Material.

Substituted polyacetylene is expected to improve the chemical stability, physical properties, and combine new functions to the polyacetylene backbones, but its diversity is very limited. Here, by applying external pressure on solid acetylenedicarboxylic acid, we report the first crystalline poly-dicarboxylacetylene with every carbon on the trans-polyacetylene backbone bonded to a carboxyl group, which is very hard to synthesize by traditional methods. The polymerization is evidenced to be a topochemical reaction with the help of hydrogen bonds. This unique structure combines the extremely high content of carbonyl groups and high conductivity of a polyacetylene backbone, which exhibits a high specific capacity and excellent cycling/rate performance as a Li-ion battery (LIB) anode. We present a completely functionalized crystalline polyacetylene and provide a high-pressure solution for the synthesis of polymeric LIB materials and other polymeric materials with a high content of active groups.