RESUMEN
The function of biomolecules is tightly linked to their structure, and changes therein. Time-resolved X-ray solution scattering has proven a powerful technique for interrogating structural changes and signal transduction in photoreceptor proteins. However, these only represent a small fraction of the biological macromolecules of interest. More recently, laser-induced temperature jumps have been introduced as a more general means of initiating structural changes in biomolecules. Here we present the development of a setup for millisecond time-resolved X-ray solution scattering experiments at the CoSAXS beamline, primarily using infrared laser light to trigger a temperature increase, and structural changes. We present results that highlight the characteristics of this setup along with data showing structural changes in lysozyme caused by a temperature jump. Further developments and applications of the setup are also discussed.
Asunto(s)
Laboratorios , Sincrotrones , Dispersión del Ángulo Pequeño , Difracción de Rayos X , Rayos XRESUMEN
The CoSAXS beamline at the MAX IV Laboratory is a modern multi-purpose (coherent) small-angle X-ray scattering (CoSAXS) instrument, designed to provide intense and optionally coherent illumination at the sample position, enabling coherent imaging and speckle contrast techniques. X-ray tracing simulations used to design the beamline optics have predicted a total photon flux of 1012-1013â photonsâ s-1 and a degree of coherence of up to 10% at 7.1â keV. The normalized degree of coherence and the coherent flux of this instrument were experimentally determined using the separability of a ptychographic reconstruction into multiple mutually incoherent modes and thus the Coherence in the name CoSAXS was verified. How the beamline can be used both for coherent imaging and XPCS measurements, which both heavily rely on the degree of coherence of the beam, was demonstrated. These results are the first experimental quantification of coherence properties in a SAXS instrument at a fourth-generation synchrotron light source.
RESUMEN
The stability of biologically produced pharmaceuticals is the limiting factor to various applications, which can be improved by formulation in solid-state forms, mostly via lyophilization. Knowledge about the protein structure at the molecular level in the solid state and its transition upon rehydration is however scarce, and yet it most likely affects the physical and chemical stability of the biological drug. In this work, synchrotron small- and wide-angle X-ray scattering (SWAXS) are used to characterize the structure of a model protein, lysozyme, in the solid state and its structural transition upon rehydration to the liquid state. The results show that the protein undergoes distortion upon drying to adopt structures that can continuously fill the space to remove the protein-air interface that may be formed upon dehydration. Above a hydration threshold of 35 wt %, the native structure of the protein is recovered. The evolution of SWAXS peaks as a function of water content in a broad range of concentrations is discussed in relation to the structural changes in the protein. The findings presented here can be used for the design and optimization of solid-state formulations of proteins with improved stability.
Asunto(s)
Muramidasa/química , Proteínas/química , Liofilización/métodos , Dispersión del Ángulo Pequeño , Sincrotrones , Agua/química , Difracción de Rayos X/métodos , Rayos XRESUMEN
The foundations of silk spinning, the structure, storage, and activation of silk proteins, remain highly debated. By combining solution small-angle neutron and X-ray scattering (SANS and SAXS) alongside circular dichroism (CD), we reveal a shape anisotropy of the four principal native spider silk feedstocks from Nephila edulis. We show that these proteins behave in solution like elongated semiflexible polymers with locally rigid sections. We demonstrated that minor ampullate and cylindriform proteins adopt a monomeric conformation, while major ampullate and flagelliform proteins have a preference for dimerization. From an evolutionary perspective, we propose that such dimerization arose to help the processing of disordered silk proteins. Collectively, our results provide insights into the molecular-scale processing of silk, uncovering a degree of evolutionary convergence in protein structures and chemistry that supports the macroscale micellar/pseudo liquid crystalline spinning mechanisms proposed by the community.
Asunto(s)
Seda , Arañas , Animales , Dicroismo Circular , Conformación Molecular , Dispersión del Ángulo Pequeño , Difracción de Rayos XRESUMEN
Solid lipid nanoparticles (SLNs) have a crystalline lipid core which is stabilized by interfacial surfactants. SLNs are considered favorable candidates for drug delivery vehicles since their ability to store and release organic molecules can be tailored through the identity of the lipids and surfactants used. When stored, polymorphic transitions in the core of drug-loaded SLNs lead to the premature release of drug molecules. Significant experimental studies have been conducted with the aim of investigating the physicochemical properties of SLNs, however, no molecular scale investigations have been reported on the behaviors that drive SLN formation and their polymorphic transitions. A combination of small angle neutron scattering and all-atom molecular dynamics simulations is therefore used to yield a detailed atomistic description of the internal structure of an SLN comprising triglyceride, tripalmitin, and the nonionic surfactant, Brij O10 (C18:1 E10 ). The molecular scale mechanisms by which the surfactants stabilize the crystalline structure of the SLN lipid core are uncovered. By comparing these results to simulated liquid and solid aggregates of tripalmitin lipids, how the morphology of the lipids vary between these systems is demonstrated providing further insight into the mechanisms that control drug encapsulation and release from SLNs.
Asunto(s)
Lípidos/química , Nanopartículas/química , Simulación de Dinámica Molecular , Triglicéridos/químicaRESUMEN
The selective engineering of conjugated polyelectrolyte (CPE)-phospholipid interfaces is poised to play a key role in the design of advanced biomedical and biotechnological devices. Herein, we report a strategic study to investigate the relationship between the charge of the CPE side group and their association with zwitterionic phospholipid bilayers. The interaction of dipalmitoylphosphatidylcholine (DPPC) phospholipid vesicles with a series of poly(thiophene)s bearing zwitterionic, cationic, or anionic terminal groups (P3Zwit, P3TMAHT and P3Anionic, respectively) has been probed. Although all CPEs showed an affinity for the zwitterionic vesicles, the calculated partition coefficients determined using photoluminescence spectroscopy suggested preferential incorporation within the lipid bilayer in the order P3Zwit > P3Anionic â« P3TMAHT. The polarity probe Prodan was used to further qualify the position of the CPE inside the vesicle bilayers via Förster resonance energy transfer (FRET) studies. The varying proximity of the CPEs to Prodan was reflected in the Stern-Volmer quenching constants and decreased in the order P3Anionic > P3TMAHT â« P3Zwit. Dynamic light scattering measurements showed an increase in the hydrodynamic diameter of the DPPC vesicles upon addition of each poly(thiophene), but to the greatest extent for P3Anionic. Small-angle neutron scattering studies also revealed that P3Anionic specifically increased the thickness of the headgroup region of the phospholipid bilayer. Epifluorescence and atomic force microscopy imaging showed that P3TMAHT formed amorphous agglomerates on the vesicle surface, P3Zwit was buried throughout the bilayer, and P3Anionic formed a shell of protruding chains around the surface, which promoted vesicle fusion. The global data indicate three distinctive modes of interaction for the poly(thiophene)s within DPPC vesicles, whereby the nature of the association is ultimately controlled by the pendant charge group on each CPE chain. Our results suggest that charge-mediated self-assembly may provide a simple and effective route to design luminescent CPE probes capable of specific localization within phospholipid membranes.
Asunto(s)
Membrana Celular/química , Membrana Dobles de Lípidos/química , Modelos Químicos , Fosfolípidos/química , Polímeros/química , Tiofenos/química , Transferencia Resonante de Energía de FluorescenciaRESUMEN
The Tween nonionic surfactants are ethoxylated sorbitan esters, which have 20 ethylene oxide groups attached to the sorbitan headgroup and a single alkyl chain, lauryl, palmityl, stearyl, or oleyl. They are an important class of surfactants that are extensively used in emulsion and foam stabilization and in applications associated with foods, cosmetics and pharmaceuticals. A range of ethoxylated polysorbate surfactants, with differing degrees of ethoxylation from 3 to 50 ethylene oxide groups, have been synthesized and characterized by neutron reflection, small-angle neutron scattering, and surface tension. In conjunction with different alkyl chain groups, this provides the opportunity to modify their surface properties, their self-assembly in solution, and their interaction with macromolecules, such as proteins. Adsorption at the air-water and oil-water interfaces and solution self-assembly of the range of ethoxylated polysorbate surfactants synthesized are presented and discussed.
Asunto(s)
Aceites/química , Polisorbatos/química , Tensoactivos/química , Agua/química , Adsorción , Aire , Micelas , SolucionesRESUMEN
Gels can be formed by dissolving Fmoc-diphenylalanine (Fmoc-PhePhe or FmocFF) in an organic solvent and adding water. We show here that the choice and amount of organic solvent allows the rheological properties of the gel to be tuned. The differences in properties arise from the microstructure of the fibre network formed. The organic solvent can then be removed post-gelation, without significant changes in the rheological properties. Gels formed using acetone are meta-stable and crystals of FmocFF suitable for X-ray diffraction can be collected from this gel.
RESUMEN
Small-angle neutron scattering, zeta potential measurements, and dynamic light scattering have been used to investigate the adsorption of polymer-surfactant mixtures at the oil-water interface. The water-hexadecane interface investigated was in the form of small oil-in-water emulsion droplets stabilized by the anionic surfactant sodium dodecyl sulfate, SDS. The impact of the addition of two different cationic polymers, poly(ethyleneimine), PEI, and poly(dimethyldiallylammonium chloride), polydmdaac, on the SDS adsorption at the oil-water interface was studied. For both polymers, the addition of the polymer enhances the SDS adsorption at low SDS concentrations at the oil-water interface due to a strong surface polyelectrolyte-surfactant interaction and complexation, but the effects are not as pronounced as at the air-water interface. For PEI/SDS, the adsorption was largely independent of solution pH and increasing PEI concentration. In marked contrast to the adsorption at the air-water interface, only monolayer adsorption and no multilayer adsorption was observed. For the SDS-polydmdaac mixture, the enhanced SDS adsorption was in the form of a monolayer, and the adsorption increased with increasing polymer concentration. The strong SDS/polydmdaac surface interaction resulted in regions of emulsion instability. The zeta potential measurements showed that the combination of SDS and polydmdaac at the interface resulted in charge reversal at the interface. This correlates with the regions of emulsion stability at both high and low polymer concentrations, such that the instabilities arise in the regions of low or zero surface charge. The results presented and their interpretation represent a development in the understanding of polymer-surfactant adsorption at the oil-water interface.
Asunto(s)
Aceites/química , Polímeros/química , Tensoactivos/química , Agua/química , Adsorción , Propiedades de SuperficieRESUMEN
HYPOTHESIS: Self-assembly of amphipathic styrene maleic acid copolymers with phospholipids in aqueous solution results in the formation of 'nanodiscs' containing a planar segment of phospholipid bilayer encapsulated by a polymer belt. Recently, studies have reported that lipids rapidly exchange between both nanodiscs in solution and external sources of lipids. Outstanding questions remain regarding details of polymer-lipid interactions, factors influencing lipid exchange and structural effects of such exchange processes. Here, the dynamic behaviour of nanodiscs is investigated, specifically the role of membrane charge and polymer chemistry. EXPERIMENTS: Two model systems are investigated: fluorescently labelled phospholipid vesicles, and Langmuir monolayers of phospholipids. Using fluorescence spectroscopy and time-resolved neutron reflectometry, the membrane potential, monolayer structure and composition are monitored with respect to time upon polymer and nanodisc interactions. FINDINGS: In the presence of external lipids, polymer chains embed throughout lipid membranes, the extent of which is governed by the net membrane charge. Nanodiscs stabilised by three different polymers will all exchange lipids and polymer with monolayers to differing extents, related to the properties of the stabilising polymer belt. These results demonstrate the dynamic nature of nanodiscs which interact with the local environment and are likely to deposit both lipids and polymer at all stages of use.
Asunto(s)
Nanoestructuras , Fosfolípidos , Membrana Dobles de Lípidos/química , Maleatos/química , Nanoestructuras/química , Fosfolípidos/química , Polímeros/química , EstirenoRESUMEN
Although unfolding of protein in the liquid state is relatively well studied, its mechanisms in the solid state, are much less understood. We evaluated the reversibility of thermal unfolding of lysozyme with respect to the water content using a combination of thermodynamic and structural techniques such as differential scanning calorimetry, synchrotron small and wide-angle X-ray scattering (SWAXS) and Raman spectroscopy. Analysis of the endothermic thermal transition obtained by DSC scans showed three distinct unfolding behaviors at different water contents. Using SWAXS and Raman spectroscopy, we investigated reversibility of the unfolding for each hydration regime for various structural levels including overall molecular shape, secondary structure, hydrophobic and hydrogen bonding interactions. In the substantially dehydrated state below 37 wt% of water the unfolding is an irreversible process and can be described by a kinetic approach; above 60 wt% the process is reversible, and the thermodynamic equilibrium approach is applied. In the intermediate range of water contents between 37 wt% and 60 wt%, the system is phase separated and the thermal denaturation involves two processes: melting of protein crystals and unfolding of protein molecules. A phase diagram of thermal unfolding/denaturation in lysozyme - water system was constructed based on the experimental data.
RESUMEN
Liquid lipid nanoparticles (LLN) are oil-in-water nanoemulsions of great interest in the delivery of hydrophobic drug molecules. They consist of a surfactant shell and a liquid lipid core. The small size of LLNs makes them difficult to study, yet a detailed understanding of their internal structure is vital in developing stable drug delivery vehicles (DDVs). Here, we implement machine learning techniques alongside small angle neutron scattering experiments and molecular dynamics simulations to provide critical insight into the conformations and distributions of the lipid and surfactant throughout the LLN. We simulate the assembly of a single LLN composed of the lipid, triolein (GTO), and the surfactant, Brij O10. Our work shows that the addition of surfactant is pivotal in the formation of a disordered lipid core; the even coverage of Brij O10 across the LLN shields the GTO from water and so the lipids adopt conformations that reduce crystallisation. We demonstrate the superior ability of unsupervised artificial neural networks in characterising the internal structure of DDVs, when compared to more conventional geometric methods. We have identified, clustered, classified and averaged the dominant conformations of lipid and surfactant molecules within the LLN, providing a multi-scale picture of the internal structure of LLNs.
RESUMEN
Some of the most fundamental chemical building blocks of life on Earth are the metal elements. X-ray absorption spectroscopy (XAS) is an element-specific technique that can analyse the local atomic and electronic structure of, for example, the active sites in catalysts and energy materials and allow the metal sites in biological samples to be identified and understood. A microfluidic device capable of withstanding the intense hard X-ray beams of a 4th generation synchrotron and harsh chemical sample conditions is presented in this work. The device is evaluated at the K-edges of iron and bromine and the L 3-edge of lead, in both transmission and fluorescence mode detection and in a wide range of sample concentrations, as low as 0.001 M. The device is fabricated in silicon and glass with plasma etched microchannels defined in the silicon wafer before anodic bonding of the glass wafer into a complete device. The device is supported with a well-designed printed chip holder that made the microfluidic device portable and easy to handle. The chip holder plays a pivotal role in mounting the delicate microfluidic device on the beamline stage. Testing validated that the device was sufficiently robust to contain and flow through harsh acids and toxic samples. There was also no significant radiation damage to the device observed, despite focusing with intense X-ray beams for multiple hours. The quality of X-ray spectra collected is comparable to that from standard methods; hence we present a robust microfluidic device to analyse liquid samples using synchrotron XAS.
RESUMEN
We demonstrate a solution method that allows both elongation rate and average fibril length of assembling amyloid fibrils to be estimated. The approach involves acquisition of real-time neutron scattering data during the initial stages of seeded growth, using contrast matched buffer to make the seeds effectively invisible to neutrons. As deuterated monomers add on to the seeds, the labelled growing ends give rise to scattering patterns that we model as cylinders whose increase in length with time gives an elongation rate. In addition, the absolute intensity of the signal can be used to determine the number of growing ends per unit volume, which in turn provides an estimate of seed length. The number of ends did not change significantly during elongation, demonstrating that any spontaneous or secondary nucleation was not significant compared with growth on the ends of pre-existing fibrils, and in addition providing a method of internal validation for the technique. Our experiments on initial growth of alpha synuclein fibrils using 1.2 mg ml-1 seeds in 2.5 mg ml-1 deuterated monomer at room temperature gave an elongation rate of 6.3 ± 0.5 Å min-1, and an average seed length estimate of 4.2 ± 1.3 µm.
RESUMEN
The E. coli membrane protein ZipA, binds to the tubulin homologue FtsZ, in the early stage of cell division. We isolated ZipA in a Styrene Maleic Acid lipid particle (SMALP) preserving its position and integrity with native E. coli membrane lipids. Direct binding of ZipA to FtsZ is demonstrated, including FtsZ fibre bundles decorated with ZipA. Using Cryo-Electron Microscopy, small-angle X-ray and neutron scattering, we determine the encapsulated-ZipA structure in isolation, and in complex with FtsZ to a resolution of 1.6 nm. Three regions can be identified from the structure which correspond to, SMALP encapsulated membrane and ZipA transmembrane helix, a separate short compact tether, and ZipA globular head which binds FtsZ. The complex extends 12 nm from the membrane in a compact structure, supported by mesoscale modelling techniques, measuring the movement and stiffness of the regions within ZipA provides molecular scale analysis and visualisation of the early divisome.
Asunto(s)
Proteínas Bacterianas/metabolismo , Proteínas Portadoras/metabolismo , Proteínas de Ciclo Celular/metabolismo , División Celular/fisiología , Proteínas del Citoesqueleto/metabolismo , Proteínas de Escherichia coli/metabolismo , Proteínas Bacterianas/fisiología , Proteínas Portadoras/fisiología , Proteínas Portadoras/ultraestructura , Proteínas de Ciclo Celular/fisiología , Proteínas de Ciclo Celular/ultraestructura , Microscopía por Crioelectrón/métodos , Proteínas del Citoesqueleto/fisiología , Escherichia coli/metabolismo , Proteínas de Escherichia coli/fisiología , Proteínas de Escherichia coli/ultraestructura , Proteínas de la Membrana/metabolismo , Unión ProteicaRESUMEN
The structure and hydration of L-proline in aqueous solution have been investigated using a combination of neutron diffraction with isotopic substitution, empirical potential structure refinement modeling, and small-angle neutron scattering at three concentrations, 1:10, 1:15, and 1:20 proline/water mole ratios. In each solution the carboxylate oxygen atoms from proline accept less than two hydrogen bonds from the surrounding water solvent and the amine hydrogen atoms donate less than one hydrogen bond to the surrounding water molecules. The solute-solute radial distribution functions indicate relatively weak interactions between proline molecules, and significant clustering or aggregation of proline is absent at all these concentrations. The spatial density distributions for the hydration of the COO- group in proline show a similar shape to that found previously in L-glutamic acid in aqueous solution but with a reduced coordination number.
Asunto(s)
Prolina/química , Agua/química , Amidas/química , Ácidos Carboxílicos/química , Espectroscopía de Resonancia por Spin del Electrón , Modelos Moleculares , Conformación Molecular , Neutrones , Soluciones/químicaRESUMEN
HYPOTHESIS: Poly(methyl methacrylate) (PMMA) latexes in nonpolar solvents are an excellent model system to understand phenomena in low dielectric media, and understanding their internal structure is critical to characterizing their performance in both fundamental studies of colloidal interactions and in potential industrial applications. Both the PMMA cores and the poly(12-hydroxystearic acid) (PHSA) shells of the latexes are known to be penetrable by solvent and small molecules, but the relevance of this for the properties of these particles is unknown. EXPERIMENTS: These particles can be prepared in a broad range of sizes, and two PMMA latexes dispersed in n-dodecane (76 and 685nm in diameter) were studied using techniques appropriate to their size. Small-angle scattering (using both neutrons and X-rays) was used to study the small latexes, and analytical centrifugation was used to study the large latexes. These studies enabled the calculation of the core densities and the amount of solvent in the stabilizer shells for both latexes. Both have consequences on interpreting measurements using these latexes. FINDINGS: The PHSA shells are highly solvated (â¼85% solvent by volume), as expected for effective steric stabilizers. However, the PHSA chains do contribute to the intensity of neutron scattering measurements on concentrated dispersions and cannot be ignored. The PMMA cores have a slightly lower density than PMMA homopolymer, which shows that only a small free volume is required to allow small molecules to penetrate into the cores. Interestingly, the observations are essentially the same, regardless of the size of the particle; these are general features of these polymer latexes. Despite the latexes being used as a model physical system, the internal chemical structure is complex and must be fully considered when characterizing them.
RESUMEN
The remarkable mechanical properties of silk fibres stem from a multi-scale hierarchical structure created when an aqueous protein "melt" is converted to an insoluble solid via flow. To directly relate a silk protein's structure and function in response to flow, we present the first application of a Rheo-IR platform, which couples cone and plate rheology with attenuated total reflectance infrared spectroscopy. This technique provides a new window into silk processing by linking shear thinning to an increase in molecular alignment, with shear thickening affecting changes in the silk protein's secondary structure. Additionally, compared to other static characterization methods for silk, Rheo-IR proved particularly useful at revealing the intrinsic difference between natural (native) and reconstituted silk feedstocks. Hence Rheo-IR offers important novel insights into natural silk processing. This has intrinsic academic merit, but it might also be useful when designing reconstituted silk analogues alongside other polymeric systems, whether natural or synthetic.
Asunto(s)
Reología , Seda/química , Animales , Bombyx , Módulo de Elasticidad , Cinética , Estructura Cuaternaria de Proteína , Espectrofotometría Infrarroja , ViscosidadRESUMEN
Self-sorting in low molecular weight hydrogels can be achieved using a pH triggered approach. We show here that this method can be used to prepare gels with different types of mechanical properties. Cooperative, disruptive or orthogonal assembled systems can be produced. Gels with interesting behaviour can be also prepared, for example self-sorted gels where delayed switch-on of gelation occurs. By careful choice of gelator, co-assembled structures can also be generated, which leads to synergistic strengthening of the mechanical properties.
RESUMEN
Here we demonstrate that superheated water is a solvent for polyamide 2,14 and piperazine-based copolyamides up to a piperazine content of 62 mol %. The incorporation of piperazine allows for a variation of the hydrogen bond density without altering the crystal structure (i.e., the piperazine units cocrystallize with the PA2,14 units (Hoffmann, S.; Vanhaecht, B.; Devroede, J.; Bras, W.; Koning, C. E.; Rastogi, S. Macromolecules 2005, 38, 1797-1803). It is shown that the crystallization of PA2,14 from superheated water greatly influences the crystal structure. Water molecules incorporated in the PA2,14 crystal lattice cause a slip on the hydrogen bonded planes, resulting in a coexistence of a triclinic and a monoclinic crystal structure. On heating above the Brill transition, the water molecules exit from the lattice, restoring the triclinic crystal structure. With increasing piperazine content, and hence decreasing hydrogen bond density, the dissolution temperature decreases. It is only possible to grow single crystals from superheated water up to a piperazine content of 62 mol %. For these single crystals, the incorporation of water molecules in the vicinity of the amide group is seen by the presence of COO- stretch vibrations with FTIR spectroscopy. These vibrations disappear on heating above the Brill transition temperature, and the water molecules leave the amide groups. For copolyamides with more than 62 mol % piperazine, no Brill transition is observed, no single crystals can be grown from water, and no water molecules are observed in the vicinity of the amide groups (Vinken, E.; Terry, A. E.; Hoffmann, S.; Vanhaecht, B.; Koning, C. E.; Rastogi, S. Macromolecules 2006, 39, 2546-2552). The high piperazine content (co)polyamides have fewer hydrogen bond donors and are therefore less likely to have interactions with the water molecules. This work demonstrates the relation among the Brill transition, the dissolution of polyamide in superheated water, and its influence on the hydrogen bonds and the amide groups.