Unusual dark-field hyperspectral and confocal Raman microscopy features of a nanoporous gold electrode coated with porphyrazine complex.

Nanoporous gold electrodes are of great interest in electroanalytical chemistry, because of their unusual activity and large surface area. The electrochemical activity can be further improved by coating with molecular catalysts such as the tetraruthenated cobalt-tetrapyridylporphyrazines investigated in this work. The plasmonic enhancement of the scattered light at the nanoholes and borders modifies the electrode's optical characteristics, improving the transmission through the surface-enhanced Raman scattering (SERS) effect. When monitored by hyperspectral dark-field and confocal Raman microscopy, this effect allows probing of the porphyrazine species at the plasmonic nanholes, improving the understanding of the chemically modified gold electrodes.

Urea Decomposition Mechanism by Dinuclear Nickel Complexes.

Urease is an enzyme containing a dinuclear nickel active center responsible for the hydrolysis of urea into carbon dioxide and ammonia. Interestingly, inorganic models of urease are unable to mimic its mechanism despite their similarities to the enzyme active site. The reason behind the discrepancy in urea decomposition mechanisms between inorganic models and urease is still unknown. To evaluate this factor, we synthesized two bis-nickel complexes, [Ni2L(OAc)] (1) and [Ni2L(Cl)(Et3N)2] (2), based on the Trost bis-Pro-Phenol ligand (L) and encompassing different ligand labilities with coordination geometries similar to the active site of jack bean urease. Both mimetic complexes produced ammonia from urea, (1) and (2), were ten- and four-fold slower than urease, respectively. The presence and importance of several reaction intermediates were evaluated both experimentally and theoretically, indicating the aquo intermediate as a key intermediate, coordinating urea in an outer-sphere manner. Both complexes produced isocyanate, revealing an activated water molecule acting as a base. In addition, the reaction with different substrates indicated the biomimetic complexes were able to hydrolyze isocyanate. Thus, our results indicate that the formation of an outer-sphere complex in the urease analogues might be the reason urease performs a different mechanism.

Eco-Friendly Synthesis of an Oxovanadium(IV)-bis(abietate) Complex with Antimicrobial Action.

The search for less expensive and viable products is always one of the challenges for research development. Commonly, the synthesis of coordination compounds involves expensive ligands, through expensive and low-yield routes, in addition to generating toxic and unusable residues. In this work, the organic ligand used is derived from the resin of a reforestation tree, Pinus elliottii var. elliottii. The synthesis method used Pinus resin and an aqueous solution of vanadium(III) chloride at a temperature of 80 °C. The procedure does not involve organic solvents and does not generate toxic residues, thus imparting the complex formation reaction a green chemistry character. The synthesis resulted in an unprecedented oxovanadium(IV)-bis(abietate) complex, which was characterized by mass spectrometry (MS), chemical analysis (CHN), vibrational (FTIR) and electronic spectra (VISIBLE), X-ray diffraction (XRD), and thermal analysis (TG/DTA). Colorimetric studies were performed according to the CIELAB color space. The structural formula found, consisted of a complex containing two abietate ligands, [VO(C20H29O2)2]. The VO(IV)-bis(abietate) complex was applied against microorganisms and showed promising results in antibacterial and antifungal activity. The best result of inhibitory action was against the strains of Gram-positive bacteria S. aureus and L. monocytogenes, with minimum inhibitory concentration (MIC) values of 62.5 and 125 µmol L−1, respectively. For Gram-negative strains the results were 500 µmol L−1 for E. coli; and 1000 µmol L−1 for Salmonella enterica Typhimurium. Antifungal activity was performed against Candida albicans, where the MIC was 15.62 µmol L−1, and for C. tropicalis it was 62.5 µmol L−1. According to the MFC analysis, the complex presented, in addition to the fungistatic action, a fungicidal action, as there was no growth of fungi on the plates tested. The results found for the tests demonstrate that the VO(IV)-bis(abietate) complex has great potential as an antimicrobial and mainly antifungal agent. In this way, the pigmented ink with antimicrobial activity could be used in environments with a potential risk of contamination, preventing the spread of microorganisms harmful to health.

Exploring the metallochromic behavior of pentacyanidoferrates in visual, electronic and Raman spot tests.

Pentacyanidoferrate(II) complexes of aromatic N-heterocycles, such as 4-cyanopyridine, exhibit characteristic colors and strong metallochromism associated with the donor-acceptor interactions of the metal ions with the cyanide ligands. In the presence of transition metal ions insoluble polymeric complexes are formed, displaying bright yellow, red, brown and green colors with zinc(II), nickel(II), copper(II) and iron(III) ions, respectively. Such metallochromic response is better observed on filter paper, allowing applications in analytical spot tests. The effects can be explored visually and probed by means of modern instrumental facilities, including spectrophotometric and resonance Raman techniques. In this way, by using the cyanopyridinepentacyanidoferrates, the Prussian Blue test for ferric ions can be extended to the entire row of transition metal elements, providing a new and modern insight of such classical Feigl's spot tests.

Unusual Photooxidation of S-Bonded Mercaptopyridine in a Mixed Ligand Ruthenium(II) Complex with Terpyridine and Bipyridine Ligands.

An unusual photooxidation of a coordinated 4-mercaptopyridine ( SpyH) ligand in the [Ru(Hmctpy)(dmbpy)(κ S-SpyH)]2+complex (Hmctpy = 4'-carboxy-2,2';6',2″-terpyridine, dmbpy = 4,4'-dimethyl-2,2'-bipyridine) takes place under visible and UV irradiation, in aerated acetonitrile. The [Ru(mctpy)(dmbpy)(κ S-SO2py)] sulfinato product has been characterized by a variety of methods, including X-ray diffraction which supports the presence of the Ru-κ S-SpyH isomer in the starting complex. The photooxidation of the 4-mercaptopyridine ligand enhances the back-bonding interactions in the complex by means of the strongly acceptor 4-pyridinesulfinato-SO2py species, increasing the redox potential of the Ru(III)/Ru(II) couple significantly from 1.23 to 1.62 V. It also led to pronounced changes in the electronic and NMR spectra of the complexes, corroborated by DFT and ZINDO-S calculations. A possible mechanism based on referenced data of photooxidation has been proposed, which involves the formation of a reactive oxygen species and intermediate endoperoxide species, yielding a very stable Ru-sulfinato product. This novel species exhibits stronger luminescence (Φ f = 0.004) than the starting complex under UV excitation.

Carbon dioxide/methanol conversion cycle based on cascade enzymatic reactions supported on superparamagnetic nanoparticles.

The conversion of carbon dioxide into important industrial feedstock is a subject of growing interest in modern society. A possible way to achieve this goal is by carrying out the CO2/methanol cascade reaction, allowing the recycle of CO2 using either chemical catalysts or enzymes. Efficient and selective reactions can be performed by enzymes; however, due to their low stability, immobilization protocols are required to improve their performance. The cascade reaction to reduce carbon dioxide into methanol has been explored by the authors, using, sequentially, alcohol dehydrogenase (ADH), formaldehyde dehydrogenase (FalDH), and formate dehydrogenase (FDH), powered by NAD+/NADH and glutamate dehydrogenase (GDH) as the co-enzyme regenerating system. All the enzymes have been immobilized on functionalized magnetite nanoparticles, and their reactions investigated separately in order to establish the best performance conditions. Although the stepwise scheme led to only 2.3% yield of methanol per NADH; in a batch system under CO2 pressure, the combination of the four immobilized enzymes increased the methanol yield by 64 fold. The studies indicated a successful regeneration of NADH in situ, envisaging a real possibility of using immobilized enzymes to perform the cascade CO2-methanol reaction.

Detection of Plasmon Coupling between Silver Nanowires Based on Hyperspectral Darkfield and SERS Imaging and Supported by DDA Theoretical Calculations.

We report the unprecedented observation of plasmon coupling between silver nanowires, showing how the surface-enhanced Raman scattering depends upon this interaction and how the spectrum can be shaped by the hot spot. Such observations were accomplished by Raman spectroscopy mapping of silver nanowires modified with rhodamine. The local spectra on the hot spots were measured by darkfield hyperspectral microscopy, a powerful but uncommonly used technique that is capable of determining the location, structure, and spectra of the hot spots. The result obtained by the simulation of two parallel nanowires based on the discrete dipole approximation (DDA) method was in excellent agreement with the results obtained experimentally.

Unveiling the structure of polytetraruthenated nickel porphyrin by Raman spectroelectrochemistry.

The structure of polytetraruthenated nickel porphyrin was unveiled for the first time by electrochemistry, Raman spectroelectrochemistry, and a hydroxyl radical trapping assay. The electrocatalytic active material, precipitated on the electrode surface after successive cycling of [NiTPyP{Ru(bipy)2Cl}4](4+) species in strong aqueous alkaline solution (pH 13), was found to be a peroxo-bridged coordination polymer. The electropolymerization process involves hydroxyl radicals (as confirmed by the characteristic set of DMPO/(•)OH adduct EPR peaks) as reaction intermediates, electrocatalytically generated in the 0.80-1.10 V range, that induce the formation of Ni-O-O-Ni coordination polymers, as evidenced by Raman spectroelectrochemistry and molecular modeling studies. The film growth is halted above 1.10 V due to the formation of oxygen gas bubbles.

Surface enhanced Raman spectroelectrochemistry of a µ-oxo triruthenium acetate cluster: an experimental and theoretical approach.

Surface enhanced Raman spectroelectrochemistry (SERS) spectroelectrochemistry provides a very sensitive technique to investigate the vibrational characteristics of coordination compounds and their particular behavior under the influence of plasmonic surfaces, concomitant with the exploitation of their redox properties and electronic spectra. The results, however, depend upon the mechanisms involved in the intensification of Raman spectra associated with the electromagnetic, resonance Raman and charge-transfer excitation at the Fermi levels. By probing the model complex [(Ru3O)(CH3COO)6(4,4'-bipy)3](n) (n = 1, 0, -1) adsorbed onto rough gold electrode surfaces, contrasting SERS profiles were obtained at several successive redox potentials and oxidation states, which enables a critical discussion on the role of the complex interaction with the gold surface, and the influence of the specific electronic bands in the triruthenium acetate cluster. Density functional theory (DFT) and time-dependent DFT calculations were carried out for the complex bound to an Au20 cluster to show the participation of active lowest unoccupied molecular orbital levels centered on the gold atoms. The corresponding charge-transfer band was predicted around 1200 nm, which supports a charge-transfer interpretation for the SERS response observed at λexc = 1064 nm. The selective enhancement of the vibrational modes was discussed based on the Raman theoretical calculations.

Association of Yeast Alcohol Dehydrogenase with Superparamagnetic Nanoparticles: Improving the Enzyme Stability and Performance.

Alcohol dehydrogenase (ADH) from Saccharomyces cerevisiae was covalently attached, via glutaraldehyde, to magnetite nanoparticles (MagNP) previously coated with aminopropyltriethoxysilane (MagNP/APTS), or with a silica shell followed by the APTS coating (MagNP@SiO2/APTS). In both cases, a great improvement of enzymatic activity has been observed for the ethanol-acetaldehyde conversion. The MagNP@SiO2/APTS-ADH system exhibited the best stability with respect to pH and temperature. Its residual activity after 10 successive recovery cycles and 24 h storage, was maintained around 80% in comparison with 20% for the MagNP/APTS system, and a null activity for free ADH. Luminescence measurements for the immobilized enzyme indicated the occurrence of conformational changes on ADH, contributing for its improved catalytic performance.

Copper(II) and Cobalt(II) Complexes Based on Abietate Ligands from Pinus Resin: Synthesis, Characterization and Their Antibacterial and Antiviral Activity against SARS-CoV-2.

Co-abietate and Cu-abietate complexes were obtained by a low-cost and eco-friendly route. The synthesis process used Pinus elliottii resin and an aqueous solution of CuSO4/CoSO4 at a mild temperature (80 °C) without organic solvents. The obtained complexes are functional pigments for commercial architectural paints with antipathogenic activity. The pigments were characterized by Fourier-transform infrared spectroscopy (FTIR), mass spectrometry (MS), thermogravimetry (TG), near-edge X-ray absorption fine structure (NEXAFS), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and colorimetric analysis. In addition, the antibacterial efficiency was evaluated using the minimum inhibitory concentration (MIC) test, and the antiviral tests followed an adaptation of the ISO 21702:2019 guideline. Finally, virus inactivation was measured using the RT-PCR protocol using 10% (w/w) of abietate complex in commercial white paint. The Co-abietate and Cu-abietate showed inactivation of >4 log against SARS-CoV-2 and a MIC value of 4.50 µg·mL-1 against both bacteria Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). The results suggest that the obtained Co-abietate and Cu-abietate complexes could be applied as pigments in architectural paints for healthcare centers, homes, and public places.

Unraveling the mysterious role of palladium in Feigl bis(dimethylglyoximate)nickel(II) spot tests by means of confocal Raman microscopy.

The acid protection effect promoted by traces of PdCl(2) in [Ni(dmgH)(2)] spot tests was elucidated from confocal Raman microscopy imaging, which revealed the formation of protecting layers of [Pd(dmgH)(2)] closing the extremities of the [Ni(dmgH)(2)] filaments.

Resolution of isomeric multi-ruthenated porphyrins by travelling wave ion mobility mass spectrometry.

The ability of travelling wave ion mobility mass spectrometry (TWIM-MS) to resolve cationic meta/para and cis/trans isomers of mono-, di-, tri- and tetra-ruthenated supramolecular porphyrins was investigated. All meta isomers were found to be more compact than the para isomers and therefore mixtures of all isomeric pairs could be properly resolved with baseline or close to baseline peak-to-peak resolution (R(p-p)). Di-substituted cis/trans isomers were found, however, to present very similar drift times and could not be resolved. N(2) and CO(2) were tested as the drift gas, and similar α but considerably better values of R(p) and R(p-p) were always observed for CO(2).

Exploring the coordination chemistry of isomerizable terpyridine derivatives for successful analyses of cis and trans isomers by travelling wave ion mobility mass spectrometry.

The photochemical cis-trans isomerization of the 4-{4-[2-(pyridin-4-yl)ethenyl]phenyl}-2,2':6',2''-terpyridine ligand (vpytpy) was investigated by UV-vis, NMR and TWIM-MS. Ion mobility mass spectrometry was performed pursuing the quantification of the isomeric composition during photolysis, however an in-source trans-to-cis isomerization process was observed. In order to overcome this inherent phenomenon, the isomerization of the vpytpy species was suppressed by complexation, reacting with iron(II) ions, and forming the [Fe(vpytpy)(2)](2+) complex. The strategy of "freezing" the cis-trans isomerizable ligand at a given geometric conformation was effective, preventing further isomerization, thus allowing the distinction of each one of the isomers in the photolysed mixture. In addition, the experimental drift times were related to the calculated surface areas of the three possible cis-cis, cis-trans and trans-trans iron(II) complex isomers. The stabilization of the ligand in a given conformation also allows us to obtain the cis-cis and cis-trans complexes exhibiting the ligand in the metastable cis-conformation, as well as in the thermodynamically stable trans-conformation.

Experimental data for green synthesis of Zn-abietate complex from natural resin.

This data article is associated with the work "Ecofriendly synthesis of Zn-abietate complex derived from Pinus elliottii resin and its application as an antibacterial pigment against S. aureus and E. coli". The characterization data of the Zn-abietate complex obtained from Pinus elliottii resin and their reactional intermediary (Na-abietate) are reported. The Na-abietate was prepared with purified Pinus resin and sodium hydroxide (≥ 99%) in a stoichiometric ratio of 1:1. For the Zn-abietate synthesis was used ZnSO4 and Na-abietate solutions were at mild temperature and stirring without using organic solvents to ensuring the green character of the synthesis. Spectroscopic and structural characterization was consistent with an octahedral complex involving three carboxylate ligands per metal ion. X-ray photoelectron spectroscopy (XPS) analysis of the Na-abietate salt confirms the presence of carbonyl groups, carbon-oxygen atoms simple bonds (O-C/O=C), and carboxylate groups oxygen atoms (O-C=O). Analysis of the Zn LMM Auger, for the Zn-abietate complex, indicates the presence of zinc atoms with oxidation state Zn2+, this is supported by the distance between Zn 2p3/2 and 1p1/2 in the XPS spectrum. Together, these data will be useful for the structural representation of the samples.

N3-dye-induced visible laser anatase-to-rutile phase transition on mesoporous TiO2 films.

Titanium dioxide has been extensively used in photocatalysis and dye-sensitized solar cells, where control of the anatase-to-rutile phase transformation may allow the realization of more efficient devices exploiting the synergic effects at anatase/rutile interfaces. Thus, a systematic study showing the proof of concept of a dye-induced morphological transition and an anatase-to-rutile transition based on visible laser (532 nm) and nano/micro patterning of mesoporous anatase (Degussa P25 TiO(2)) films is described for the first time using a confocal Raman microscope. At low laser intensities, only the bleaching of the adsorbed N3 dye was observed. However, high enough temperatures to promote melting/densification processes and create a deep hole at the focus and an extensive phase transformation in the surrounding material were achieved using 1s laser pulses of 25-41 mW/cm(2), in resonance with the MLCT band. The dye was shown to play a key role, being responsible for the absorption and efficient conversion of the laser light into heat. As a matter of fact, the dye is photothermally decomposed to amorphous carbon or to gaseous species (CO(x), NO(x), and H(2)O) under a N(2) or O(2) atmosphere, respectively.

A new insight on the preparation of stabilized alpha-nickel hydroxide nanoparticles.

Nickel hydroxide can provide an outstanding cathode material in alkaline secondary batteries, however the progressive decrease of the charge capacity as a function of the number of oxidation/reduction cycles is a challenging problem to be solved. New improvements on the electrochemical properties of electrode materials can be achieved by exploiting the much better performance of alpha-nickel hydroxide. Such materials were obtained in a stable form by sol-gel method and characterized by thermogravimetric analyses, UV-Vis spectroscopy, X-ray diffractometry, scanning and transmission electron microscopy, cyclic voltammetry and electrochemical quartz crystal microbalance techniques. The results revealed not only the formation of the alpha-Ni(OH)2 phase, but also a much better electrochemical reversibility and stability as compared with similar materials obtained by electrochemical precipitation method.

Overcoming lithium analysis difficulties with a simple colorimetric/spectrophotometric method.

The analytical determination of lithium ions is usually performed by atomic absorption and X-ray fluorescence methods. Chemical analysis based on polyfluoroporphyrin chromogenic methods is also being employed, especially for biological samples. However, all existing methods are expensive and not suitable for routine work or field assays. The alternative method proposed here is based on the formation of a LiKFe(IO6) compound which is converted into a tris(1,10-phenanthroline)iron(ii) complex and monitored by spectrophotometric or colorimetric methods, the latter using a smartphone app. Under similar conditions, these two methods proved superior to the X-ray fluorescence method. A one pot analysis of lithium ions is also described, using an Eppendorf microtube previously modified for performing reaction, filtration and detection. This method is simple and very convenient for didactic and field assays.

Solvophobic-controlled synthesis of smart magneto-fluorescent nanostructures for real-time inspection of metallic fractures.

The production of materials that contain more than one functional constituent, the so-called multifunctional materials, is quite relevant in advanced technology. By acting as building blocks, nanoparticles can be suitably explored for generating higher-order multifunctional structures. In this regard, herein, a special clustered magneto-fluorescent superstructure has been developed for non-destructive detection of flaws and shallow subsurface discontinuities in industrial ferromagnetic materials. The strategy consists of the solvophobic-controlled assembly of organic-based maghemite cores and water-based II-VI quantum dots, in the presence of hexadecyltrimethyl-ammonium bromide, CTAB, as a compatibilizer agent. This composite exhibited a high magnetic response (σ max = 66 emu g-1) and uniform size, in addition to tunable optical properties (QY = 78%). The strategy of utilizing nanoparticles as magneto-fluorescent nanoprobes to identify tiny slits represents a great advance, for improving the capability of precisely revealing the fracture boundary locations by visual real-time inspection. The nanoscale probes exhibit a low signal-to-noise ratio and a higher competitive performance in relation to the existing micrometric detection systems.

A luminescent boron difluoride derivative of the YELLOW 101 dye.

Inspired on the outstanding behavior of the BODIPY dye, a new fluorescent boron fluoride derivative of the classical 2,2'-dihydroxy-1,1'-naphtalazine or YELLOW 101 dye has been synthesized and investigated in this work. Analogously to YELLOW 101 (λemission = 510 nm), the new species, here denoted BYELLOW 101, exhibits strong fluorescence around 570 and 535 nm in the solid form and in organic solvents, respectively. The observed red shift of the luminescence emission can be explored in the superparamagnetic fluorescent materials employed in MPI (magnetic particle inspection) technology, decreasing the influence of the FRET mechanism, - a critical limitation in this type of system. BYELLOW 101 is stable in solid form, but in organic solvents, it hydrolyses very slowly regenerating the initial dye, keeping the fluorescence emission but exhibiting a small blue shift along the time.