Sulfur radical formation from the tropospheric irradiation of aqueous sulfate aerosols.

The sulfate anion radical (SO4•-) is known to be formed in the autoxidation chain of sulfur dioxide and from minor reactions when sulfate or bisulfate ions are activated by OH radicals, NO3 radicals, or iron. Here, we report a source of SO4•-, from the irradiation of the liquid water of sulfate-containing organic aerosol particles under natural sunlight and laboratory UV radiation. Irradiation of aqueous sulfate mixed with a variety of atmospherically relevant organic compounds degrades the organics well within the typical lifetime of aerosols in the atmosphere. Products of the SO4•- + organic reaction include surface-active organosulfates and small organic acids, alongside other products. Scavenging and deoxygenated experiments indicate that SO4•- radicals, instead of OH, drive the reaction. Ion substitution experiments confirm that sulfate ions are necessary for organic reactivity, while the cation identity is of low importance. The reaction proceeds at pH 1-6, implicating both bisulfate and sulfate in the formation of photoinduced SO4•-. Certain aromatic species may further accelerate the reaction through synergy. This reaction may impact our understanding of atmospheric sulfur reactions, aerosol properties, and organic aerosol lifetimes when inserted into aqueous chemistry model mechanisms.

Quantification of Free Radicals from Vaping Electronic Cigarettes Containing Nicotine Salt Solutions with Different Organic Acid Types and Concentrations.

Electronic (e-) cigarette formulations containing nicotine salts from a range of organic acid conjugates and pH values have dominated the commercial market. The acids in the nicotine salt formulations may alter the redox environment in e-cigarettes, impacting free radical formation in e-cigarette aerosol. Here, the generation of aerosol mass and free radicals from a fourth-generation e-cigarette device was evaluated at 2 wt % nicotine salts (pH 7, 30:70 mixture propylene glycol to vegetable glycerin) across eight organic acids used in e-liquids: benzoic acid (BA), salicylic acid (SLA), lactic acid (LA), levulinic acid (LVA), succinic acid (SA), malic acid (MA), tartaric acid (TA), and citric acid (CA). Furthermore, 2 wt % BA nicotine salts were studied at the following nicotine to acid ratios: 1:2 (pH 4), 1:1 (pH 7), and 2:1 (pH 8), in comparison with freebase nicotine (pH 10). Radical yields were quantified by spin-trapping and electron paramagnetic resonance (EPR) spectroscopy. The EPR spectra of free radicals in the nicotine salt aerosol matched those generated from the Fenton reaction, which are primarily hydroxyl (OH) radicals and other reactive oxygen species (ROS). Although the aerosol mass formation was not significantly different for most of the tested nicotine salts and acid concentrations, notable ROS yields were observed only from BA, CA, and TA under the study conditions. The e-liquids with SLA, LA, LVA, SA, and MA produced less ROS than the 2 wt % freebase nicotine e-liquid, suggesting that organic acids may play dual roles in the production and scavenging of ROS. For BA nicotine salts, it was found that the ROS yield increased with a higher acid concentration (or a lower nicotine to acid ratio). The observation that BA nicotine salts produce the highest ROS yield in aerosol generated from a fourth-generation vape device, which increases with acid concentration, has important implications for ROS-mediated health outcomes that may be relevant to consumers, manufacturers, and regulatory agencies.

Carbonyls and Aerosol Mass Generation from Vaping Nicotine Salt Solutions Using Fourth- and Third-Generation E-Cigarette Devices: Effects of Coil Resistance, Coil Age, and Coil Metal Material.

Aerosol formation and production yields from 11 carbonyls (carbonyl concentration per aerosol mass unit) were investigated (1) from a fourth-generation (4th gen) e-cigarette device at different coil resistances and coil age (0-5000 puffs) using unflavored e-liquid with 2% benzoic acid nicotine salt, (2) between a sub-ohm third-generation (3rd gen) tank mod at 0.12 Ω and a 4th gen pod at 1.2 Ω using e-liquid with nicotine salt, together with nicotine yield, and (3) from 3rd gen coils of different metals (stainless steel, kanthal, nichrome) using e-liquid with freebase nicotine. Coil resistance had an inverse relationship with coil temperature, and coil temperature was directly proportional to aerosol mass formation. Trends in carbonyl yields depended on carbonyl formation mechanisms. Carbonyls produced primarily from thermal degradation chemistry (e.g., formaldehyde, acetaldehyde, acrolein, propionaldehyde) increased per aerosol mass with higher coil resistances, despite lower coil temperature. Carbonyls produced primarily from chemistry initiated by reactive oxygen species (ROS) (e.g., hydroxyacetone, dihydroxyacetone, methylglyoxal, glycolaldehyde, lactaldehyde) showed the opposite trend. Coil age did not alter coil temperature nor aerosol mass formation but had a significant effect on carbonyl formation. Thermal carbonyls were formed optimally at 500 puffs in our study and then declined to a baseline, whereas ROS-derived carbonyls showed a slow rise to a maximum trend with coil aging. The 3rd gen versus 4th gen device comparison mirrored the trends in coil resistance. Nicotine yields per aerosol mass were consistent between 3rd and 4th gen devices. Coil material did not significantly alter aerosol formation nor carbonyl yield when adjusted for wattage. This work shows that sub-ohm coils may not necessarily produce higher carbonyl yields even when they produce more aerosol mass. Furthermore, carbonyl formation is dynamic and not generalizable during the coil's lifetime. Finally, studies that compare data across different e-cigarette devices, coil age, and coil anatomy should account for the aerosol chemistry trends that depend on these parameters.

Vaping Aerosols from Vitamin E Acetate and Tetrahydrocannabinol Oil: Chemistry and Composition.

The popularity of vaping cannabis products has increased sharply in recent years. In 2019, a sudden onset of electronic cigarette/vaping-associated lung injury (EVALI) was reported, leading to thousands of cases of lung illness and dozens of deaths due to the vaping of tetrahydrocannabinol (THC)-containing e-liquids that were obtained on the black market. A potential cause of EVALI has been hypothesized due to the illicit use of vitamin E acetate (VEA) in cannabis vape cartridges. However, the chemistry that modifies VEA and THC oil, to potentially produce toxic byproducts, is not well understood under different scenarios of use. In this work, we quantified carbonyls, organic acids, cannabinoids, and terpenes in the vaping aerosol of pure VEA, purified THC oil, and an equal volume mixture of VEA and THC oil at various coil temperatures (100-300 °C). It was found under the conditions of our study that degradation of VEA and cannabinoids, including Δ9-THC and cannabigerol (CBG), occurred via radical oxidation and direct thermal decomposition pathways. Evidence of terpene degradation was also observed. The bond cleavage of aliphatic side chains in both VEA and cannabinoids formed a variety of smaller carbonyls. Oxidation at the ring positions of cannabinoids formed various functionalized products. We show that THC oil has a stronger tendency to aerosolize and degrade compared to VEA at a given temperature. The addition of VEA to the e-liquid nonlinearly suppressed the formation of vape aerosol compared to THC oil. At the same time, toxic carbonyls including formaldehyde, 4-methylpentanal, glyoxal, or diacetyl and its isomers were highly enhanced in VEA e-liquid when normalized to particle mass.

Second-Order Kinetic Rate Coefficients for the Aqueous-Phase Sulfate Radical (SO4•-) Oxidation of Some Atmospherically Relevant Organic Compounds.

The sulfate anion radical (SO4•-) is a reactive oxidant formed in the autoxidation chain of sulfur dioxide, among other sources. Recently, new formation pathways toward SO4•- and other reactive sulfur species have been reported. This work investigated the second-order rate coefficients for the aqueous SO4•- oxidation of the following important organic aerosol compounds (kSO4): 2-methyltetrol, 2-methyl-1,2,3-trihydroxy-4-sulfate, 2-methyl-1,2-dihydroxy-3-sulfate, 1,2-dihydroxyisoprene, 2-methyl-2,3-dihydroxy-1,4-dinitrate, 2-methyl-1,2,4-trihydroxy-3-nitrate, 2-methylglyceric acid, 2-methylglycerate, lactic acid, lactate, pyruvic acid, pyruvate. The rate coefficients of the unknowns were determined against that of a reference in pure water in a temperature range of 298-322 K. The decays of each reagent were measured with nuclear magnetic resonance (NMR) and high-performance liquid chromatography-high-resolution mass spectrometry (HPLC-HRMS). Incorporating additional SO4•- reactions into models may aid in the understanding of organosulfate formation, radical propagation, and aerosol mass sinks.

Impact of e-Liquid Composition, Coil Temperature, and Puff Topography on the Aerosol Chemistry of Electronic Cigarettes.

E-cigarette aerosol is a complex mixture of gases and particles with a composition that is dependent on the e-liquid formulation, puffing regimen, and device operational parameters. This work investigated mainstream aerosols from a third generation device, as a function of coil temperature (315-510 °F, or 157-266 °C), puff duration (2-4 s), and the ratio of propylene glycol (PG) to vegetable glycerin (VG) in e-liquid (100:0-0:100). Targeted and untargeted analyses using liquid chromatography high-resolution mass spectrometry, gas chromatography, in situ chemical ionization mass spectrometry, and gravimetry were used for chemical characterizations. PG and VG were found to be the major constituents (>99%) in both phases of the aerosol. Most e-cigarette components were observed to be volatile or semivolatile under the conditions tested. PG was found almost entirely in the gas phase, while VG had a sizable particle component. Nicotine was only observed in the particle phase. The production of aerosol mass and carbonyl degradation products dramatically increased with higher coil temperature and puff duration, but decreased with increasing VG fraction in the e-liquid. An exception is acrolein, which increased with increasing VG. The formation of carbonyls was dominated by the heat-induced dehydration mechanism in the temperature range studied, yet radical reactions also played an important role. The findings from this study identified open questions regarding both pathways. The vaping process consumed PG significantly faster than VG under all tested conditions, suggesting that e-liquids become more enriched in VG and the exposure to acrolein significantly increases as vaping continues. It can be estimated that a 30:70 initial ratio of PG:VG in the e-liquid becomes almost entirely VG when 60-70% of e-liquid remains during the vaping process at 375 °F (191 °C). This work underscores the need for further research on the puffing lifecycle of e-cigarettes.

Thermal transformations of perfluorooctanoic acid (PFOA): Mechanisms, volatile organofluorine emissions, and implications to thermal regeneration of granular activated carbon.

Thermal treatment is effective for the removal of perfluorooctanoic acid (PFOA). However, how temperatures, heating methods, and granular activated carbon (GAC) influence pyrolysis of PFOA, and emission risks are not fully understood. We studied thermal behaviors of PFOA at various conditions and analyzed gaseous products using real-time detection technologies and gas chromatography-mass spectrometry (GC-MS). The thermal decomposition of PFOA is surface-mediated. On the surface of quartz, PFOA decomposed into perfluoro-1-heptene and perfluoro-2-heptene, while on GAC, it tended to decompose into 1 H-perfluoroheptane (C7HF15). Neutral PFOA started evaporating around 100 â„ƒ without decomposition in ramp heating. During pyrolysis, when PFOA was pre-adsorbed onto GAC, it was mineralized into SiF4 and produced more than 45 volatile organic fluorine (VOF) byproducts, including perfluorocarbons (PFCs) and hydrofluorocarbons (HFCs). The VOF products were longer-chain (hydro)fluorocarbons (C4-C7) at low temperatures (< 500 â„ƒ) and became shorter-chain (C1-C4) at higher temperatures (> 600 â„ƒ). PFOA transformations include decarboxylation, VOF desorption, further organofluorine decomposition and mineralization in ramp heating of PFOA-laden GAC. Decarboxylation initiates at 120 â„ƒ, but other processes require higher temperatures (>200 â„ƒ). These results offer valuable information regarding the thermal regeneration of PFAS-laden GAC and further VOF control with the afterburner or thermal oxidizer.