Hydrothermal and thermal-alkali pretreatments of wheat straw: Co-digestion, substrate solubilization, biogas yield and kinetic study.

Agro-waste having lignocellulosic biomass is considered most effective (heating value 16 MJ/kg) for energy production through anaerobic digestion (AD). However, recalcitrant lignocellulosic fraction in agro-waste obstructs its biotransformation and is a rate-limiting step of the process. This study investigated the effects of hydrothermal and thermal-alkaline pretreatment on anaerobic co-digestion of wheat straw (WS). The hydrothermal pretreatment of WS revealed that 60 min was the best pretreatment time to achieve the highest substrate solubilization. It was employed for thermal-alkali pretreatment at variable temperatures and NaOH doses. Thermal-alkali pretreatment at 125°C-7% NaOH shows the highest (34%) biogas yield of 662 mL/gVS, followed by 646 mL/gVS biogas yield at 150°C-1% NaOH assay (31% higher) over control. Although the 125°C-7% NaOH assay achieved the highest biogas yield, the 150°C-1% NaOH assay was found more feasible considering the cost of a 6% higher chemical used in the earlier assay. The thermal-alkali pretreatment was observed to reduce the formation of recalcitrant compounds (HMF, Furfural) and increase the buffering capacity of the slurry over hydrothermal pretreatment. Principal component analysis (PCA) of the various pretreatment and AD operational parameters was carried out to study their in-depth correlation. Moreover, a kinetic study of the experimental data was performed to observe the biodegradation trend and compare it with the Modified Gompertz (MG) and First Order (FO) models.

Advanced steam-explosion pretreatment mediated anaerobic digestion of municipal sludge: Effects on methane yield, emerging contaminants removal, and microbial community.

Advanced steam explosion pretreatment, i.e., the Thermal hydrolysis process (THP) is applied mainly to improve the sludge solubilization and subsequent methane yield in the downstream anaerobic digestion (AD) process. However, the potential of THP in pretreating the high solids retention time (SRT) sludges, mitigating the risk of emerging organic micropollutants and effects on anaerobic microbiome in digester remains unclear. In this study, sludge from a sequencing batch reactor (SBR) system operating at a SRT of 40 days was subjected to THP using a 5 L pilot plant at the temperature ranges of 120-180 °C for 30-120 min. The effect of THP on organics solubilization, methane yield, organic micropollutant removal, and microbial community dynamics was studied. The highest methane yield of 507 mL CH4/g VSadded and volatile solids (VS) removal of 54% were observed at 160°C- 30min THP condition, i.e., 4.1 and 2.6 times higher than the control (123 mL CH4/gVSadded, 20.7%), respectively. The experimental values of hydrolysis coefficient and methane yield have been predicted using Modified Gompertz, First order, and Logistics models. The observed values fitted well with all three models showing an R2 value between 0.96 and 1.0. THP pretreated sludges showed >80% removal of Trimethoprim, Enrofloxacin, Ciprofloxacin, and Bezafibrate. However, Carbamazepine, 17α-ethinylestradiol, and Progesterone showed recalcitrant behavior, resulting in less than 50% removal. Microbial diversity analysis showed the dominance of Proteobacteria, Firmicutes, Chloroflexi, and Bacteroidetes, collectively accounting for >70-80% of bacterial reads. They are mainly responsible for the fermentation of complex biomolecules like polysaccharides, proteins, and lipids. The THP-mediated anaerobic digestion of sludge shows better performance than the control digestion, improved methane yield, higher VS and micropollutants removal, and a diverse microbiome in the digester.

Global distribution of pesticides in freshwater resources and their remediation approaches.

The role of pesticides in enhancing global agricultural production is magnificent. However, their unmanaged use threatens water resources and individual health. A significant pesticide concentration leaches to groundwater or reaches surface waters through runoff. Water contaminated with pesticides may cause acute or chronic toxicity to impacted populations and exert adverse environmental effects. It necessitates the monitoring and removing pesticides from water resources as prime global concerns. This work reviewed the global occurrences of pesticides in potable water and discussed the conventional and advanced technologies for the removal of pesticides. The concentration of pesticides highly varies in freshwater resources across the globe. The highest concentration of α-HCH (6.538 µg/L, at Yucatan, Mexico), lindane (6.08 µg/L at Chilka lake, Odisha, India), 2,4, DDT (0.90 µg/L, at Akkar, Lebanon), chlorpyrifos (9.1 µg/L, at Kota, Rajasthan, India), malathion (5.3 µg/L, at Kota, Rajasthan, India), atrazine (28.0 µg/L, at Venado Tuerto City, Argentina), endosulfan (0.78 µg/L, at Yavtmal, Maharashtra, India), parathion (4.17 µg/L, at Akkar, Lebanon), endrin (3.48 µg/L, at KwaZuln-Natl Province, South Africa) and imidacloprid (1.53 µg/L, at Son-La province, Vietnam) are reported. Pesticides can be significantly removed through physical, chemical, and biological treatment. Mycoremediation technology has the potential for up to 90% pesticide removal from water resources. Complete removal of the pesticides through a single biological treatment approach such as mycoremediation, phytoremediation, bioremediation, and microbial fuel cells is still a challenging task, however, the integration of two or more biological treatment approaches can attain complete removal of pesticides from water resources. Physical methods along with oxidation methods can be employed for complete removal of pesticides from drinking water.

Microplastics as emergent contaminants in landfill leachate: Source, potential impact and remediation technologies.

A significant amount of plastic waste is generated each year on a global scale, in which the maximum quantity of plastic waste is typically dumped in landfills in various parts of the world. Moreover, dumping plastic waste in landfills cannot address the issue of proper disposal; it simply delays the process. Exploiting waste resources entails environmental hazards because plastic wastes buried in landfills gradually break down into Microplastics (MPs) due to physical, chemical, and biological effects. The possibility of landfill leachate as a source of MPs in the environment has not received much attention. Without systematic treatment, MPs in leachate increase the risk to human health and environmental health since they contain dangerous and toxic pollutants and antibiotic resistance genes transmitted by leachate vectors. Due to their severe environmental risks, MPs are now widely recognized as emerging pollutants. Therefore, the composition of MPs in landfill leachate and the interaction of MPs with other hazardous contaminants are summarised in this review. The available potential mitigation or treatment methods of MPs in landfill leachate as of now, along with the drawbacks and challenges of the present leachate treatment for eliminating MPs, are described in this review. Since it is unclear how MPs will be removed from the current leachate facilities, it is crucial to develop innovative treatment facilities as quickly as possible. Finally, the areas that require more research to provide complete solutions to the persistent problem of plastic debris are discussed.

Semi-continuous anaerobic co-digestion of thermal and thermal-alkali processed organic fraction of municipal solid waste: Methane yield, energy analysis, anaerobic microbiome.

The semi-continuous anaerobic co-digestion (AcoD) of thermal and thermal-alkali pretreated organic fraction of municipal solid waste (OFMSW) and sewage sludge (SS) was studied under varying hydraulic retention times (HRT) and organic loading rates (OLR Three semi-continuous digesters were operated under control (non-pre-treated), thermally pretreated (125 °C), and thermal-alkali pretreated (125°C-3g/L NaOH) conditions at variable OLRs at 2.5, 4.0, 5.1, and 7.6 kgVS/m3.d and corresponding HRTs of 30, 20, 15, and 10 days. The 10 and 43% higher methane yield (0.445 m3/kgVS) and 11 and 57% higher VS removal (52%) was achieved for thermal-alkali pretreated digester at 5.1 kgVS/m3.d OLR over thermally pretreated (0.408 m3/kgVS, 45% VS removal) and control digesters (0.310 m3/kgVS, 33% VS removal), respectively. Thermal and thermal-alkali digesters failed on increasing the OLR to 7.6 kgVS/m3.d, whereas the control digester becomes upset at 5.1 kgVS/m3.d OLR. The metagenomic study revealed that Firmicutes, Bacteroidetes, Chloroflexi, Euryarchaeota, Proteobacteria, and Actinobacteria were the predominant bacterial population, whereas Methanosarcina and Methanothrix dominated the archaeal community. Energy balance analysis revealed that thermal alkali pretreatment showed the highest positive energy balance of 114.6 MJ/ton with an energy ratio of 1.25 compared with thermally pretreated (81.5 MJ/ton) and control samples (-46.9 MJ/ton). This work pave the way for scaleup of both thermal and thermal-alkali pre-treatment at 125 °C to realize the techno-economic and energy potential of the process.

Microplastics in landfill leachate: Occurrence, health concerns, and removal strategies.

Landfills are commonly used to manage solid waste, but they can contribute to microplastic (MPs) pollution. As plastic waste degrades in landfills, MPs are released into the surrounding environment, contaminating soil, groundwater, and surface water. This poses a threat to human health and the environment, as MPs can adsorb toxic substances. This paper provides a comprehensive review of the degradation process of macroplastics into microplastics, the types of MPs found in landfill leachate (LL), and the potential toxicity of microplastic pollution. The study also evaluates various physical-chemical and biological treatment methods for removing MPs from wastewater. The concentration of MPs in young landfills is higher than in old landfills, and specific polymers such as polypropylene, polystyrene, nylon, and polycarbonate contribute significantly to microplastic contamination. Primary treatments such as chemical precipitation and electrocoagulation can remove up to 60-99% of total MPs from wastewater, while tertiary treatments such as sand filtration, ultrafiltration, and reverse osmosis can remove up to 90-99%. Advanced techniques, such as a combination of membrane bioreactor, ultrafiltration, and nanofiltration (MBR + UF + NF), can achieve even higher removal rates. Overall, this paper highlights the importance of continuous monitoring of microplastic pollution and the need for effective microplastic removal from LL to protect human and environmental health. However, more research is needed to determine the actual cost and feasibility of these treatment processes at a larger scale.

Critical insights into anaerobic co-digestion of wheat straw with food waste and cattle manure: Synergistic effects on biogas yield and kinetic modeling.

In this study, four batch assays were performed to ensure the synergic effects of co-digestion and find out the best inoculums to substrate ratio (ISR), carbon to nitrogen ratio (C:N), and total solid (TS) percentage in sequence. The co-digestion of three feedstocks had a 20% higher biogas yield (416 mL/gVS added) than mono-digestion with 21% volatile solids (VS) degradation. The ISR of 2 leads to the highest biogas yield (431 mL/gVS added) and VS removal (30.3%) over other ISRs (0.5, 1.0, 2.5) studied. The lower ISR (<2) tended to have lower pH due to insufficient anaerobes inside the digester. The C:N 35 (with ISR 2) yielded 17.4% higher biogas (443.5 mL/gVS added) than mono-digestion and was the highest among the C:N ratios studied with 36.6% VS removal. The VFA, alkalinity, and pH in C:N 35 assay were more stable than in other C:N assays. In the fourth batch assay, varying TS% (5, 7.5, 10, 12.5) were used with optimized ISR (2) and C:N (35). Higher TS% (10 and 12.5) had some lag phase but later achieved higher biogas production. The 12.5% TS assay achieved 80% higher biogas yield (679 mL/gVS added) over mono-digestion, i.e., highest among the TS% studied, with 48% VS removal. In conclusion, co-digestion of mixed feedstocks with ISR 2, C:N 35, and TS 12.5% could degrade almost half of the substrate available for biodegradation. Further biodegradation may require pretreatment of the recalcitrant WS. Modified Gompertz, first-order, transference, and logistic models were used for kinetic study and curve fitting of experimental data. For the optimized batch assays, the estimated specific rate constants were 0.08, 0.12, 0.083, and 0.084. The data fits well in all the models, with the coefficient of discrimination (R2) ranging from 0.882 to 0.999.

Principles and potential of thermal hydrolysis of sewage sludge to enhance anaerobic digestion.

Sewage sludge is rich source of carbon, nutrients, and trace elements and can be subjected to proper treatment before disposal to fulfill government legislation and protect receiving environments. Anaerobic digestion (AD) is a well-adopted technology for stabilizing sewage sludge and recovering energy-rich biogas and nutrient-rich digestate. However, a slow hydrolysis rate limits the biodegradability of sludge. In the present study we have attempted to explain the potential of thermal hydrolysis to enhance anaerobic digestion of sewage sludge. Thermal pretreatment improves biodegradability and recycling of the sludge as an excellent energy and nutrients recovery source at reasonable capital (CAPEX) and operational (OPEX) costs. Other pretreatments like conventional (below/above 100 °C), temperature-phased anaerobic digestion (TPAD), microwave and chemically mediated thermal pretreatment have also been accounted. This review provides a holistic overview of sludge's characterization and value-added properties, various techniques used for sludge pretreatment for resource recovery, emphasizing conventional and advanced thermal pretreatment, challenges in scale-up of these technologies, and successful commercialization of thermal pretreatment techniques.

Surveillance of Wastewater for Early Epidemic Prediction (SWEEP): Environmental and health security perspectives in the post COVID-19 Anthropocene.

The present work summarizes the major research findings related to wastewater-based epidemiology (WBE) study of COVID-19 and puts forward a conceptual framework, termed as "Surveillance of Wastewater for Early Epidemic Prediction (SWEEP)" for implementation of WBE. SWEEP framework is likely to tackle few practical issues related to WBE and simultaneously proposes refinements to the approach for better outcome and efficiency to save precious lives around the globe. It is observed that the present pandemic offers an opportunity for SWEEP to get included in routine urban water management to put the humankind at front to stop such pandemic in future or at least be prepared to fight against it. With global collaboration, SWEEP can be fine-tuned to meet diverse needs, making the present and future generations resilient to future viral outbreaks. Recent WBE studies conducted to check for the presence of SARS-CoV-2 in wastewater revealed that raw sewage samples tested positive to PCR-based assays while the treated samples showed absence of viral titers. Moreover, the lockdown had a positive impact on decreasing the viral loading in sewage. The proposed SWEEP protocol has an advantage over testifying individuals for predicting the stage of pandemic.

Epidemiology and diagnosis, environmental resources quality and socio-economic perspectives for COVID-19 pandemic.

The COVID-19 pandemic caused by SARS-CoV-2 has emerged as a global issue of concern for public health, environment and socio-economic setup. This review addresses several aspects of epidemiology, and pathogenesis, environmental resource quality (air quality, hazardous waste management, and wastewater surveillance issues), and socio-economic issues worldwide. The accelerated research activity in the development of diagnostic kits for SARS-CoV-2 is in progress for the rapid sequencing of various strains of SARS-CoV-2. A notable reduction in air pollutants (NO2 and PM2.5) has been observed worldwide, but high air polluted cities showed intense mortalities in COVID-19 affected areas. The use of health safety equipment halted transportation, and work-from-home policy drastically impacted the quantity of solid and hazardous wastes management services. Wastewater appeared as another mode of enteric transmission of SARS-CoV-2. Thus, wastewater-based surveillance could act as a mode of the data source to track the virus's community spread. The pandemic also had a substantial socio-economic impact (health budget, industrial manufacturing, job loss, and unemployment) and further aggravated the countries' economic burden.

Mechanical-biological treatment of municipal solid waste: Case study of 100 TPD Goa plant, India.

A long-term feasibility analysis of a 100 ton per day mechanical biological treatment (MBT) plant for municipal solid waste (MSW) valorization and material and energy recovery was carried out. It involves the material recovery and segregation stage (MRSS), organic extraction (pulping), thermophilic anaerobic digestion (AD), composting, effluent treatment plant (ETP), and biogas genset stages producing: 11.90% recyclables, 33% refused derived fuel (RDF), 5% compost of total waste received, 70 m3/day recyclable water and 0.435 MWh/day electricity. The biogas and methane yield were 0.535 and 0.350 m3/kg VSadded (avg.), respectively, with 40% VS removal (avg total solids (TS) 10%). Less than 3% (inert) of total waste received was subjected to landfill disposal. The MBT plant's revenue generation is 995 US$ per day/148 tons ($ 6.72/ton) waste processed. The gross OPEX is 24 US$/ton making the net OPEX of 17 US$/ton (minus revenue), which could be considered as the excellent OPEX for MSW based MBT plants as per global benchmarks. Further, local usage of RDF can significantly reduce the OPEX to 14 US$/ton, as almost 16% of the OPEX goes towards RDF disposal to cement companies located at a distance of 200-500 km from the MBT plant site. As per LCA study, the total GHG emissions have been calculated to be -25.68 tons CO2 eq./100 tons MSW. The negative emissions result from the export of electricity, compost, and RDF as well as recycling of paper and plastic products. Our study presents a cutting-edge scenario of all-inclusive recycling, recovery, and reuse loop of MSW direly required for accomplishing a circular economy.

Bio-stimulation of anaerobic digestion by low intensity ultrasonication.

Low intensity ultrasonication (US) was applied to stimulate the biological activities in anaerobic digestion (AD) process. The enhancement in methane production was used to investigate the sono-biostimulation effects on the process performance. The 32% higher CH4 production was observed over control at best US intensity and irradiation time of 0.0028 W/mL and 120 s, respectively. The sono-biostimulation effects in terms of higher CH4 generation over control lasted for 45 h. The increase in the concentration of NH4 +-N and K+ considered the indication of cell lysis under applied US conditions. At best US intensity and irradiation time, the NH4 +-N and K+ fraction in the medium remained similar as of control, which indicated that no cell lysis occurred. The preliminary findings of the study showed that low intensity US can be a promising solution to enhance the process efficiency in terms of higher methane production with minimal energy requirement.

Evaluation of sludge quality in Indian sewage treatment plants to develop quality control indices.

Dewatered sludges from twenty-two sewage treatment facilities were characterized to develop the quality control indices in India. This study used fertilizer index (FI) and clean index (CI) as a tool for categorizing sludge utilization into different classes (A, B, C and limited use classes LU-1, LU-2, LU-3) by their fertilizing potential, toxicity level, pathogen presence, and vector attraction reduction criteria. The findings revealed that total P (as P2O5), total N, and K (as K2O) in the sludge samples ranged from 0.9 to 5.7%, 1.2 to 3.8%, and 0.1 to 1.5%, respectively. Moreover, all sludges belong to Class C and lower category due to the presence of toxic metals and pathogens. The helminth eggs were found in the range of 25-1450 Numbers/4gTS in sludge samples. The highest number of helminth eggs of 1450/4 g of TS was found in the fecal sludge. The specific oxygen uptake rate (SOUR) values in the sludge samples varied from 0.3 to 4.9, with a median value of 1.3 and an RSD of 86% is way too high. It indicates that the sludge samples need further treatment to be less attractive as a food source for vectors and rodents. However, sludge samples have fertilizing potential and FI values ranges from 4.1 to 4.9, and CI value ranges from 2.5 to 5.0. It indicates that compost is best in quality and has high-fertilizer potential and low heavy-metal content, which is suitable for high-value crops such as organic farming. Further sludge treatment using typical composting, aerobic or anaerobic digestion, and solar or thermal drying could bring the sludges into the Class A and B categories.

Combined sodium citrate and ultrasonic pretreatment of waste activated sludge for cost effective production of biogas.

This study aimed to pretreat the waste activated sludge (WAS) by ultrasonication in an energy efficient way by combining sodium citrate with ultrasonic pretreatment at 0.03 g/g suspended solids (SS) of dosage. The ultrasonic pretreatment was done at various (20-200 W) power levels, sludge concentration (7 to 30 g/L), sodium citrate dosages (0.01 to 0.2 g/g SS). An elevated COD solubilization of 26.07 ± 0.6 % was achieved by combined pretreatment at a treatment time of 10 min, ultrasonic power level of 160 W when compared to individual ultrasonic pretreatment (18.6 ± 0.5 %). A higher biomethane yield of 0.26 ± 0.009 L/g COD was achieved in sodium citrate combined ultrasonic pretreatment (SCUP) than ultrasonic pretreatment (UP) 0.145 ± 0.006 L/g COD. Almost 50% of the energy can be saved through SCUP when compared to UP. Future study evaluating SCUP in continuous mode anaerobic digestion is vital.

Prevalence of pharmaceuticals and personal care products, microplastics and co-infecting microbes in the post-COVID-19 era and its implications on antimicrobial resistance and potential endocrine disruptive effects.

The COVID-19 (coronavirus disease 2019) pandemic's steady condition coupled with predominance of emerging contaminants in the environment and its synergistic implications in recent times has stoked interest in combating medical emergencies in this dynamic environment. In this context, high concentrations of pharmaceutical and personal care products (PPCPs), microplastics (MPs), antimicrobial resistance (AMR), and soaring coinfecting microbes, tied with potential endocrine disruptive (ED) are critical environmental concerns that requires a detailed documentation and analysis. During the pandemic, the identification, enumeration, and assessment of potential hazards of PPCPs and MPs and (used as anti-COVID-19 agents/applications) in aquatic habitats have been attempted globally. Albeit receding threats in the magnitude of COVID-19 infections, both these pollutants have still posed serious consequences to aquatic ecosystems and the very health and hygiene of the population in the vicinity. The surge in the contaminants post-COVID also renders them to be potent vectors to harbor and amplify AMR. Pertinently, the present work attempts to critically review such instances to understand the underlying mechanism, interactions swaying the current health of our environment during this post-COVID-19 era. During this juncture, although prevention of diseases, patient care, and self-hygiene have taken precedence, nevertheless antimicrobial stewardship (AMS) efforts have been overlooked. Unnecessary usage of PPCPs and plastics during the pandemic has resulted in increased emerging contaminants (i.e., active pharmaceutical ingredients and MPs) in various environmental matrices. It was also noticed that among COVID-19 patients, while the bacterial co-infection prevalence was 0.2-51%, the fungi, viral, protozoan and helminth were 0.3-49, 1-22, 2-15, 0.4-15% respectively, rendering them resistant to residual PPCPs. There are inevitable chances of ED effects from PPCPs and MPs applied previously, that could pose far-reaching health concerns. Furthermore, clinical and other experimental evidence for many newer compounds is very scarce and demands further research. Pro-active measures targeting effective waste management, evolved environmental policies aiding strict regulatory measures, and scientific research would be crucial in minimizing the impact and creating better preparedness towards such events among the masses fostering sustainability.

Resolution of conflict of reduced sludge production with EBPR by coupling OSA to A2/O process in a pilot scale SBR.

The pinnacle of all the efforts of nutrient removal is practically put-down the moment biological cells are lysed, hydrolyzed or digested causing subsequent reappearance of assimilated nitrogen and phosphorus in any biological process. While sludge reduction requires high SRT, the enhanced phosphorus assimilative uptake demands low SRT. A novel reactor configuration for enhanced sludge and phosphorus removal was put to test by incorporating a side stream anaerobic reactor to an Anaerobic-Anoxic-Aerobic (A2O) SBR with a pre-anoxic chamber and an influent receiving inlet anaerobic reactor. The reactor was operated at the average and lowest range of prevailing carbon/phosphorus (C/P) ratio of 50 and 15 in the sewage. The phosphorus enrichment was 0.0469-0.135 mgTP/mgVSS resulting in 1.76-5.05-fold increase from cellular content by virtue of maintaining sludge recycle from SBR aeration tank to side stream anaerobic reactor from 3.78 to 9.78 (average 4.4-8.2) gVSS/gVSS present in the reactor. However, the sludge was also reduced from 3% to 51% on an average basis during the same recirculation regime. This novel configuration consists of an inlet anaerobic reactor, one pre-anoxic chamber and one intermittent oxic anoxic reaction SBR and a side stream anaerobic reactor. The first anaerobic reactor at inlet followed by pre-anoxic chamber was provided for increased ortho-p released and nitrification respectively and a side stream anaerobic reactor for sludge reduction through sludge fasting mechanism. The EBPR and lesser sludge growth were two conflicting parameters reconciled to the extent that if sludge recycled up to 6.41 gVSS/gVSS the sludge growth would be reduced by 25% and phosphorus enrichment could be attained up to 3.46 times the stoichiometric value. Any further recirculation would reduce the sludge further but at the expense of enhanced phosphorus uptake as released phosphorus from side stream anaerobic reactor also recycled back to main SBR causing looping and at more than 6.41gVSSrecycled/gVSS it nullified the enhanced effect.

Effects of multi-metal toxicity on the performance of sewage treatment system during the festival of colors (Holi) in India.

The present study investigated the effects of heavy metals (Ni, Zn, Cd, Cu, and Pb) toxicity on the performance of 18 MLD activated sludge process-based sewage treatment plant (STP) during celebration of Holi (festival of colors in India). The composite sampling (n = 32) was carried out during the entire study period. The findings show a significant decrease in chemical oxygen demand removal efficiency (20%) of activated sludge system, after receiving the heavy metals laden wastewater. A significant reduction of 40% and 60% were observed in MLVSS/MLSS ratio and specific oxygen uptake rate, which eventually led to a substantial decrease in biomass growth yield (from 0.54 to 0.17). The toxic effect of metals ions was also observed on protozoan population. Out of the 12 mixed liquor species recorded, only two ciliates species of Vorticella and Epistylis exhibited the greater tolerance against heavy metals toxicity. Furthermore, activated sludge shows the highest metal adsorption affinity for Cu, followed by Zn, Pb, Ni, and Cd (Cu > Zn > Pb > Ni > Cd). Finally, this study proves the robustness of activated sludge system against the sudden increase in heavy metal toxicity since it recovered the earlier good quality performance within 5 days.

Biohydrogen production from waste activated sludge through thermochemical mechanical pretreatment.

Generation of excess sludge in large quantities from wastewater treatment plant face huge problem in terms of handling and management, whereas it possess higher organic and inorganic constituents and thus it can be used as a feedstock for the generation of biofuel with proper disintegration techniques.In this regard, an effort has been made in this study to combine thermo-chemo-disperser pretreatment for the disintegration of paper mill waste activated sludge for the production of biohydrogen in an energy efficient way. These combinations of thermo-chemo-disperser (TCD) tend to be effective in disintegration and possess 24.3% COD solubilization and higher suspended solid reduction of 18.8% at the specific energy usage of 2081.82 kJ/kg TS. The pretreatment with TCD technique shows the biohydrogen production of 120.2 mLH2/gCOD as compared to thermochemically pretreated alone (73.6 mLH2/gCOD) sample. Thus, the combined process was considered to be potentially effective in sludge disintegration.

Breakthrough in hydrolysis of waste biomass by physico-chemical pretreatment processes for efficient anaerobic digestion.

Anaerobic digestion (AD) is the most comprehended process to stabilise the waste biomass efficiently and to obtain bioenergy. The AD starts with the hydrolysis process, where the major liability is the action of inhibitors during the hydrolysis process. The biomass pretreatment preceding anaerobic digestion is obligatory to improve feedstock biodegradability for enhanced biogas generation. It can be prevailed by the application of various pretreatment processes. This review explains the major inhibiting compounds and their formation during hydrolysis that affect the efficiency of anaerobic digestion and the benefits of the physico-chemical pretreatment (PCP) method for enhancing hydrolysis in the digestion of waste biomass. The synergistic effect of PCP on macromolecular release, liquefaction and biodegradability were presented. The feasibility of the pretreatment process was evaluated in terms of energy and cost assessment for pilot scale implementation. The outcome of this review reveals that the physico-chemical process is one of the best pretreatment methods to enhance anaerobic digestion by optimising various parameters and increasing the solubilization by about 90%. The thermochemical pretreatment at lower temperature (<100) increases the net energy yield. The solubilization of waste biomass in terms of macromolecular release and liquefaction cannot describe the pretreatment potential. The effectiveness of pretreatment was evaluated by the substrate pre-treatment followed by anaerobic digestibility of pretreated substrate.

Novel insight on ferric ions addition to mitigate recalcitrant formation during thermal-alkali hydrolysis to enhance biomethanation.

Thermal-chemical pre-treatment has proven to facilitate the solubilization of organics and improvement in biogas generation from the organic fraction of municipal solid waste (OFMSW). However, the production of recalcitrant is inevitable when OFMSW is pretreated at high temperatures and alkali dosage. This study develops a strategy to use Fe3+ to reduce the formation of recalcitrant compounds, i.e., 5-HydroxyMethyl Furfural (5-HMF), furfurals, and humic acids (HA) during thermal-alkali pre-treatment. It was postulated that the formation of the recalcitrant compound during pre-treatment can be reduced by Fe3+ dosing to oxidize intermediates of Maillard reactions. A decrease in 5-HMF (45-49%) and furfurals (54-66%) was observed during Fe3+ (optimum dose: 10 mg/L) mediated thermal-alkali pre-treatment owing to the Lewis acid behavior of FeCl3. The Fe3+ mediated assays show a substantial improvement in VS removal (28%) and biogas yield, i.e., 31% (292 mL/gVSadded) in 150 °C + 3 g/L NaOH, 34% (316 mL/gVSadded) in 175 °C + 3 g/L NaOH, and 36% (205 mL/gVSadded) in 200 °C + 3 g/L NaOH assays, over their respective controls (no Fe3+ dosing). The reducing property of Fe3+ rendered a low ORP (-345 mV) in the system than control, which is beneficial to the anaerobic microbiome. Electrical conductivity (EC) also shows a three-fold increase in Fe3+ mediated assays over control, promoting direct interspecies electron transfer (DIET) amongst microbes involved in the electrical syntrophy. The score plot and loading plots from principal component analysis (PCA) showed that the results obtained by supplementing 10 mg/L Fe3+ at 150, 175, and 200 °C were significantly different. The correlation of the operational parameters was also mutually correlated. This work provides a techno-economically and environmentally feasible option to mitigate the formation of recalcitrant compounds and enhance biogas production in downstream AD by improving the degradability of pretreated substrate.