Deciphering the human urine matrix: a new approach to simultaneously quantify the main ions and organic compounds by ion chromatography/mass spectrometry (IC-MS).

Analyzing the composition of (human) urine plays a major role in the fields of biology and medicine. Organic molecules (such as urea, creatine) and ions (such as chloride, sulfate) are the major compounds present in urine, the quantification of which allows for the diagnosis of a subject's health condition. Various analytical methods have been reported for studying urine components and validated on the basis of known and referenced compounds. The present work introduces a new method able to simultaneously determine both major organic molecules and ions contained in urine, by combining ion chromatography using a conductimetric detector with mass spectroscopy. The analysis of organic and ionized compounds (anionic and cationic) was achieved in double injections. For quantification, the standard addition method was used. Human urine samples were pre-treated (diluted and filtered) for IC-CD/MS analysis. The analytes were separated in 35 min. Calibration ranges (0-20 mg.L-1) and correlation coefficients (> 99.3%) as well as detection (LODs < 0.75 mg.L-1) and quantification (LOQs < 2.59 mg.L-1) limits were obtained for the main organic molecules (lactic, hippuric, citric, uric, oxalic acids, urea, creatine, and creatinine) and ions (chloride, sulfate, phosphate, sodium, ammonium, potassium, calcium, and magnesium) contained in urine. The intra- and inter-day accuracies of the analytes consistently ranged from 0.1 to 5.0%, and the precision was within 4.0%. For all analytes, no significant matrix effects were observed, and recoveries ranged from 94.9 to 102.6%. Finally, quantitative results of analytes were obtained from 10 different human urine samples.

A Multi-Parametric Device with Innovative Solid Electrodes for Long-Term Monitoring of pH, Redox-Potential and Conductivity in a Nuclear Waste Repository.

We present an innovative electrochemical probe for the monitoring of pH, redox potential and conductivity in near-field rocks of deep geological radioactive waste repositories. The probe is composed of a monocrystalline antimony electrode for pH sensing, four AgCl/Ag-based reference or Cl- selective electrodes, one Ag2S/Ag-based reference or S2- selective electrode, as well as four platinum electrodes, a gold electrode and a glassy-carbon electrode for redox potential measurements. Galvanostatic electrochemistry impedance spectroscopy using AgCl/Ag-based and platinum electrodes measure conductivity. The use of such a multi-parameter probe provides redundant information, based as it is on the simultaneous behaviour under identical conditions of different electrodes of the same material, as well as on that of electrodes made of different materials. This identifies the changes in physical and chemical parameters in a solution, as well as the redox reactions controlling the measured potential, both in the solution and/or at the electrode/solution interface. Understanding the electrochemical behaviour of selected materials thus is a key point of our research, as provides the basis for constructing the abacuses needed for developing robust and reliable field sensors.

The Role of Oxygenic Groups and sp3 Carbon Hybridization in Activated Graphite Electrodes for Vanadium Redox Flow Batteries.

Graphite felt is a widely used electrode material for vanadium redox flow batteries. Electrode activation leads to the functionalization of the graphite surface with epoxy, OH, C=O, and COOH oxygenic groups and changes the carbon surface morphology and electronic structure, thereby improving the electrode's electroactivity relative to the untreated graphite. In this study, density functional theory (DFT) calculations are conducted to evaluate functionalization's contribution towards the positive half-cell reaction of the vanadium redox flow battery. The DFT calculations show that oxygenic groups improve the graphite felt's affinity towards the VO2+ /VO2 + redox couple in the following order: C=O>COOH>OH> basal plane. Projected density-of-states (PDOS) calculations show that these groups increase the electrode's sp3 hybridization in the same order, indicating that the increase in sp3 hybridization is responsible for the improved electroactivity, whereas the oxygenic groups' presence is responsible for this sp3 increment. These insights can aid the selection of activation processes and optimization of their parameters.

Elucidating the dechlorination mechanism of hexachloroethane by Pd-doped zerovalent iron microparticles in dissolved lactic acid polymers using chromatography and indirect monitoring of iron corrosion.

The degradation mechanism of the pollutant hexachloroethane (HCA) by a suspension of Pd-doped zerovalent iron microparticles (Pd-mZVI) in dissolved lactic acid polymers and oligomers (referred to as PLA) was investigated using gas chromatography and the indirect monitoring of iron corrosion by continuous measurements of pH, oxidation-reduction potential (ORP), and conductivity. The first experiments took place in the absence of HCA, to understand the evolution of the Pd-mZVI/PLA/H2O system. This showed that the evolution of pH, ORP, and conductivity is related to changes in solution chemistry due to iron corrosion and that the system is initially cathodically controlled by H+ mass transport to Pd surfaces because of the presence of an extensive PLA layer. We then investigated the effects of Pd-mZVI particles, temperature, initial HCA concentration, and PLA content on the Pd-mZVI/PLA/HCA/H2O system, to obtain a better understanding of the degradation mechanism. In all cases, HCA dechlorination first requires the production of atomic hydrogen H*-involving the accumulation of tetrachloroethylene (PCE) as an intermediate-before its subsequent reduction to non-chlorinated C2 and C4 compounds. The ratio between Pd-mZVI dosage, initial HCA concentration, and PLA content affects the rate of H* generation as well as the rate-determining step of the process. A pseudo-first-order equation can be applied when Pd-mZVI dosage is much higher than the theoretical stoichiometry (600 mg for [HCA]0 = 5-20 mg L-1). Our results indicate that the HCA degradation mechanism includes mass transfer, sorption, surface reaction with H*, and desorption of the product.

Electrochemical reduction of G3-factor endoperoxide and its methyl ether: evidence for a competition between concerted and stepwise dissociative electron transfer.

The reduction of the bicyclic G-factor endoperoxides G3 and G3Me was studied in N,N-dimethylformamide using cyclic voltammetry and convolution analysis. Electron transfer leads to irreversible cleavage of the O--O bond. Detailed analysis of the voltammetry curves reveals a non-linear dependence on the transfer coefficient indicating a mechanistic transition from a stepwise mechanism to one with more concerted character with increasing potential. By using quantum calculations to estimate the O--O bond dissociation energies, the experimental data was used to evaluate the standard reduction potentials and other pertinent thermochemical information.

Laminar flow-based electrochemical microreactor for efficient regeneration of nicotinamide cofactors for biocatalysis.

One of the long-standing challenges in biocatalysis is the search for methods to continuously regenerate essential cofactors such as NADH that would enable a wide range of enzymes to be used in the more environmentally friendly synthesis of chiral fine chemicals including pharmaceuticals, cosmetics, and food additives. This communication reports a microreactor-based cofactor regeneration method that exploits the microfluidic phenomenon of laminar flow: a reactant stream and a buffer stream are introduced in a microchannel and continue to flow side by side without turbulent mixing between two electrodes that cover opposing channel walls. Adjustment of the flow rate ratio of the two streams in laminar flow enables focusing of the reactant stream close to the cathode, thereby reversing a normally unfavorable reaction equilibrium essential for cofactor regeneration. The absence of a bulk phase in these microreactors prevents the undesired reverse reaction to take place, which has prevented the use of electrochemical cofactor regeneration in macroscale processes. Here, we demonstrate the regeneration of NADH with conversion efficiencies as high as 31%. We also show the subsequent in situ conversion of an achiral substrate, pyruvate, into a chiral product, l-lactate, within this microreactor.

Crucial role of the peroxyketal function for antimalarial activity in the G-factor series.

New endoperoxides, related to the natural phytohormones known as G factors (G1, G2, G3), were modified on the side chain and the ketalic position. An unexpected rearrangement, specific to one diastereoisomer was observed in the deprotection step of O-silylated compounds and attributed to a hexacoordinated fluorosilicon intermediate. The reduction potential of these new peroxides was determined. They exhibited good to moderate antimalarial activity, greatly related to the presence of peroxyketal function.