Structural and luminescence studies of titanium co-doped SrY2 O4 :Eu phosphors.

Here, europium-doped (1 to 11 mol%) and titanium (1 to 5 mol%)co-doped SrY2 O4 :Eu phosphors were synthesized using solid-state reaction method. The synthesized samples were characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), and photoluminescence (PL) techniques for structural, morphological, functional group, and photoluminescence studies, respectively. XRD patterns confirmed the formation of pure phase SrY2 O4 at 1300°C and structural parameters were further determined using Rietveld refinement. FESEM micrographs revealed that doped and co-doped samples had different morphological features. All the samples were excited at ultraviolet light excitation and emission spectra consisted of peaks corresponding to the Eu ions. The maximum PL intensity was observed for 9 mol% of Eu ions and 3 mol% co-doping of Ti ions. The synthesized phosphors have potential applications in optoelectronics and display devices.

Spin-glass behavior and pyroelectric anomalies in a new lithium-based oxide, Li3FeRuO5.

The results of dc and ac magnetization, heat capacity, (57)Fe Mössbauer spectroscopy, dielectric, pyroelectric current and isothermal magneto-capacitance measurements of a recently reported lithium-rich layered oxide, Li3FeRuO5, related to LiCoO2-type (rhombohedral, space group R3[combining macron]m), are presented. The results reveal that the compound undergoes spin-glass freezing at 15 K. There is a peak around 34 K in pyroelectric data, which cannot be attributed to ferroelectricity, but to the phenomenon of thermally stimulated depolarization current. As revealed by magnetocapacitance data above and below the magnetic ordering temperature, magnetic and electric dipoles appear to be coupled, thereby offering evidence for magnetodielectric coupling.

Insights from Micro-second Atomistic Simulations of Melittin in Thin Lipid Bilayers.

The membrane disruption and pore-forming mechanism of melittin has been widely explored by experiments and computational studies. However, the precise mechanism is still enigmatic, and further study is required to turn antimicrobial peptides into future promising drugs against microbes. In this study, unbiased microsecond (µs) time scale (total 17 µs) atomistic molecular dynamics simulation were performed on multiple melittin systems in 1,2-dimyristoyl-sn-glycero-3-phosphocholine membrane to capture the various events during the membrane disorder produced by melittin. We observed bent U-shaped conformations of melittin, penetrated deeply into the membrane in all simulations, and a special double U-shaped structure. However, no peptide transmembrane insertion, nor pore formation was seen, indicating that these processes occur on much longer timescales, and suggesting that many prior computational studies of melittin were not sufficiently unbiased.

Molecular simulation and docking studies of Gal1p and Gal3p proteins in the presence and absence of ligands ATP and galactose: implication for transcriptional activation of GAL genes.

The Gal4p mediated transcriptional activation of GAL genes requires the interaction between Gal3p bound with ATP and galactose and Gal80p. Though numerous studies suggest that galactose and ATP activate Gal3p/Gal1p interaction with Gal80p, neither the mechanism of activation nor the interacting surface that binds to Gal80p is well understood. In this study we investigated the dynamics of Gal3p and Gal1p in the presence and absence of ligands ATP and galactose to understand the role played by dynamics in the function of these proteins through molecular dynamics simulation and protein-protein docking studies. We performed simulations totaling to 510 ns on both Gal1p and Gal3p proteins in the presence and absence of ligands ATP and galactose. We find that, while binding of ligands ATP and galactose to Gal3p/Gal1p do not affect the global conformation of proteins, some local conformational changes around upper-lip helix including insertion domain are observed. We observed that only in the presence of ATP and galactose, Gal3p displays opening and closing motion between the two domains. And because of this motion, a binding interface, which is largely hydrophobic, opens up on the surface of Gal3p and this surface can bind to Gal80p. From our simulation studies we infer probable docking sites for Gal80p on Gal3p/Gal1p, which were further ascertained by the docking of Gal80p on to ligand bound Gal1p and Gal3p proteins, and the residues at the interface between Gal3p and Gal80p are identified. Our results correlate quite well with the existing body of literature on functional and dynamical aspects of Gal1p and Gal3p proteins.

Mainstreaming Local Food Species for Nutritional and Livelihood Security: Insights From Traditional Food Systems of Adi Community of Arunachal Pradesh, India.

This study brings out the critical role of lesser-known local plant species in the food, nutrition and livelihood security of Adi community in Arunachal Pradesh, India. Considering women as a major custodian in knowledge and practices on foods, a total of 90 Adi women and 60 key knowledgeable community members (thus a total of 150 participants) were selected from East Siang and Upper Siang districts of Arunachal Pradesh. Data were collected using combination of methods including recipe contest, focus group discussion, personal interviews and laboratory analyses. The results indicated that Adi women were able to identify 39 bioculturally important species from a range of locally available plant species. Used alone or with other foods, these plants remain central to the Adi people's cultural identity and livelihood security. In addition to improving food and nutritional security, these species accessed from different land use systems, are also sold on the local markets to generate decent incomes. Of the species identified by Adi women, 28 were culturally shared and used frequently in food and ethnomedicine. Laboratory analyses of the selected 22 species revealed exceptionally high levels of minerals and other nutrients, such as proteins and anti-oxidants, supporting their traditional use for health benefits. Our study results provide valuable insights to the researchers to explore the vast hidden potential of these and other similar species for improving nutritional well-being of local communities in marginal areas. Adequate policy support is needed to enable Adi and other such marginalized communities to cope with challenges being posed to traditional food systems.

Amperometric immunosensor based on gold nanoparticles/alumina sol-gel modified screen-printed electrodes for antibodies to Plasmodium falciparum histidine rich protein-2.

We report herein the amperometric immunosensor for antibodies to Plasmodium falciparum histidine rich protein-2 (PfHRP-2). Screen-printed electrodes (SPEs) were modified with alumina sol-gel (Al(2)O(3) sol-gel) derived film and gold nanoparticles i.e. AuNPs/Al(2)O(3)sol-gel/SPE. A thin film was formed by dripping Al(2)O(3) sol on SPE followed by electrochemical deposition of gold nanoparticles (AuNPs). The modified SPEs were characterized by scanning electron microscopy/energy dispersive X-ray analysis (SEM-EDAX), Raman spectra and voltammetric experiments. Antibodies in rabbit serum sample were allowed to react with the PfHRP-2 protein that was immobilized on the modified SPE to form antigen-antibody immune complex (PfHRP-2/anti-PfHRP-2). The bound antibodies were quantified by alkaline phosphatase (AP) enzyme labeled secondary antibodies (anti-rabbit immunoglobulins-AP conjugate). Enzymatic substrate, 1-naphthyl phosphate was converted to 1-naphthol by AP and an electroactive product was quantified using amperometry. The performances of the developed immunosensor and Dot-ELISA were tested against different dilutions of hyper immune serum (rabbit anti-PfHRP-2). Dot ELISA and the developed immunosensor (AuNPs/Al(2)O(3)sol-gel/SPE) results for the hyper immune serum containing anti-PfHRP-2 were distinctly positive when diluted upto 8 times (1 : 12800 dilution) and 11 times (1 : 102400 dilution), respectively. The developed immunosensor was applied for antibodies to PfHRP-2 in human clinical samples.

Destruction of multiferroicity in Tb2BaNiO5 by Sr-doping and its implication to magnetodielectric coupling.

The Haldane spin-chain compound, Tb2BaNiO5, with two antiferromagnetic transitions, one at T 1 = 63 K and the other at T 2 = 25 K, has been recently shown to be an exotic multiferroic below T 2. Here, we report the results of our investigation of Sr doping at the Ba site by magnetization, heat-capacity, magnetodielectric (MDE) and pyrocurrent measurements. An intriguing finding, which we stress, is that the ferroelectricity is lost even for a doping level of ten atomic percent, though magnetic ordering prevails. The doped specimens however retain significant MDE behaviour, but with reduced magnitudes and qualitative changes with respect to the behaviour of the parent compound. This implies that ferroelectric order is also crucial for the anomalously large MDE in the parent compound, in addition to the role of 4f single-ion anisotropy.

Observation of magnetoelastic and magnetoelectric coupling in Sc doped BaFe12O19 due to spin-glass-like phase.

The present work reports magnetic, magnetoelastic and magnetoelectric (ME) response of scandium (Sc) doped barium hexaferrite, BaFe10Sc2O19. DC magnetization shows that partial substitution of non-magnetic Sc for Fe in barium hexaferrite results in a reduction of Curie temperature (T C) from 730 K known for the parent compound BaFe12O19 to 430 K. Magnetization measurements show that, in BaFe10Sc2O19, in addition to the magnetic transition at 250 K corresponding to longitudinal conical magnetic structure, another magnetic anomaly occurs in the vicinity of 50 K (T max). Ac susceptibility and magnetic relaxation show that the magnetic transition at T max is associated with spin glass like dynamics. Field dependence of this glassy transition temperature follows the Almeida-Thouless (A-T) line expected for spin glass-like behaviour. Unit cell volume obtained from the neutron diffraction (ND) measurements shows deviation from the Debye-Gruneisen behaviour below 50 K, revealing the magnetoelastic coupling. Existence of magnetoelastic coupling is also confirmed by Raman spectra as Raman modes show anomalous changes around 50 K and also indicates presence of lattice modulation. Further, the magnetic structure obtained from ND data shows that incommensurate longitudinal conical ferrimagnetic structure persists from 210 K to 3 K. The integrated intensity of (0 0 2) peak and magnetic moments undergoes a subtle change below 50 K that seems to favour coexistence of long range magnetic ordering and spin glass-like dynamics. Significant magneto-dielectric effect was observed around 50 K. Temperature dependent studies of dielectric constant and pyroelectric current indicate the presence of ferroelectricity even in zero magnetic field. Further, existence of ME coupling below 50 K is confirmed by temperature dependence of pyroelectric current under magnetic fields up to 70 kOe. In short, this work identifies a new magnetic anomaly around 50 K, which is spin-glass-like inducing magnetoelastic and ME anomalies, even in the absence of external magnetic fields.

Integrated Electrochemical Analysis System with Microfluidic and Sensing Functions.

An integrated device that carries out the timely transport of solutions andconducts electroanalysis was constructed. The transport of solutions was based oncapillary action in overall hydrophilic flow channels and control by valves that operateon the basis of electrowetting. Electrochemical sensors including glucose, lactate,glutamic oxaloacetic transaminase (GOT), glutamic pyruvic transaminase (GPT), pH,ammonia, urea, and creatinine were integrated. An air gap structure was used for theammonia, urea, and creatinine sensors to realize a rapid response. To enhance thetransport of ammonia that existed or was produced by the enzymatic reactions, the pHof the solution was elevated by mixing it with a NaOH solution using a valve based onelectrowetting. The sensors for GOT and GPT used a freeze-dried substrate matrix torealize rapid mixing. The sample solution was transported to required sensing sites atdesired times. The integrated sensors showed distinct responses when a sample solutionreached the respective sensing sites. Linear relationships were observed between theoutput signals and the concentration or the logarithm of the concentration of theanalytes. An interferent, L-ascorbic acid, could be eliminated electrochemically in thesample injection port.

Enzyme electrode formed by evaporative concentration and its performance characterization.

A highly concentrated immobilized enzyme layer was formed on a small working electrode, and the behavior of the electrode as an amperometric sensor was examined. To this end, a super-hydrophobic layer was formed in an area other than the sensitive area by using polytetrafluoroethylene (PTFE) beads. A small droplet of an enzyme solution containing glucose oxidase (GOD) and bovine serum albumin (BSA) was placed on the sensitive area, concentrated by evaporation, and crosslinked with glutaraldehyde. With the same enzyme activity per unit area, the current density increased with smaller working electrodes. Also, the current density increased with higher enzyme loadings up to a limiting value. In addition, the linear range of the calibration plot was expanded to higher glucose concentrations. The enzyme electrode fabricated by the novel method was incorporated in a micro-flow channel. Compared with large enzyme electrodes with the same enzyme activity per unit area, smaller electrodes showed a significant increase in the current density and a decrease in the flow dependence. The conversion efficiency could be improved by narrowing the flow channel and increasing the number of electrodes, which was comparable with a large electrode placed in a shallow flow channel.

Determination of the activities of glutamic oxaloacetic transaminase and glutamic pyruvic transaminase in a microfluidic system.

A microfluidic system for the analysis of the activities of glutamic-oxaloacetic transaminase (GOT) and glutamic-pyruvic transaminase (GPT) was fabricated. The device consists of a glass chip with a micro-electrochemical L-glutamate sensor and a polydimethylsiloxane (PDMS) sheet with a Y-shaped micro-flow channel. A sample solution and a substrate solution for the enzymes were introduced from two injection ports at the end of the flow channel. When the flows were stopped, substrates in a solution mixed immediately with either of the enzymes by diffusion in a mixing channel. L-glutamate produced by the enzymatic reaction of GOT or GPT in the flow channel was detected by using the L-glutamate sensor. A distinct current increase was observed immediately after mixing, and the initial slope of the response curve varied in proportion to the activity of GOT or GPT. The relation between the slope of the response curve and the enzyme activity was linear between 7 and 228 U l-1 for GOT and 9 and 250 U l-1 for GPT. The quality of the response curve was improved with an increase in the channel height. The measurement based on the rate analysis in the micro-flow channel facilitated the reduction of the influence of interferents. The influence of the viscosity of the sample solution was also checked for the analysis of real samples. The determination of the enzyme activities was also conducted in a system with micropumps fabricated for a sample injection. Two solutions could be mixed in the mixing channel, and the activity of the enzymes could be measured as in the experiments using microsyringe pumps.

Magnetic behavior of metallic kagome lattices, Tb3Ru4Al12 and Er3Ru4Al12.

We report the magnetic behavior of two intermetallic-based kagome lattices, Tb3Ru4Al12 and Er3Ru4Al12, crystallizing in the Gd3Ru4Al2-type hexagonal crystal structure, by measurements in the range 1.8-300 K with bulk experimental techniques (ac and dc magnetization, heat capacity, and magnetoresistance). The main finding is that the Tb compound, known to order antiferromagnetically below (T N =) 22 K, shows glassy characteristics at lower temperatures ([Formula: see text]15 K), thus characterizing this compound as a re-entrant spin-glass. The data reveal that the glassy phase is quite complex and is of a cluster type. Since glassy behavior was not seen for the Gd analog in the past literature, this finding on the Tb compound emphasizes that this kagome family could provide an opportunity to explore the role of higher-order interactions (such as quadrupole) in bringing out magnetic frustration. Additional findings reported here for this compound are: (i) The plots of temperature dependence of magnetic susceptibility and electrical resistivity data in the range 12-20 K, just below T N , are found to be hysteretic leading to a magnetic phase in this intermediate temperature range, mimicking disorder-broadened first-order magnetic phase transitions; (ii) features attributable to an interesting magnetic phase co-existence phenomenon in the isothermal magnetoresistance in zero field, after travelling across metamagnetic transition fields, are observed. With respect to the Er compound, we do not find any evidence for long-range magnetic ordering down to 2 K, but this compound appears to be on the verge of magnetic order at 2 K.

Pyrocurrent anomalies and intrinsic magnetodielectric behavior near room temperature in Li2Ni2Mo3O12, a compound with distorted honeycomb and spin-chains.

Keeping current interests to identify materials with intrinsic magnetodielectric behaviour near room temperature and with novel pyroelectric current anomalies, we report temperature and magnetic-field dependent behavior of complex dielectric permittivity and pyroelectric current for an oxide, Li2Ni2Mo3O12, containing magnetic ions with (distorted) honey-comb and chain arrangement and ordering magnetically below 8 K. The dielectric data reveal the existence of relaxor ferroelectricity behaviour in the range 160-240 K and there are corresponding Raman mode anomalies as well in this temperature range. Pyrocurrent behavior is also consistent with this interpretation, with the pyrocurrent peak-temperature interestingly correlating with the poling temperature. 7Li NMR offer an evidence for crystallographic disorder intrinsic to this compound and we therefore conclude that such a disorder is apparently responsible for the randomness of local electric field leading to relaxor ferroelectric property. Another observation of emphasis is that there is a notable decrease in the dielectric constant with the application of magnetic field to the tune of about -2.4% at 300 K, with the magnitude varying marginally with temperature. Small loss factor values validate the intrinsic behaviour of the magnetodielectric effect at room temperature.

Dependence of the response of an amperometric biosensor formed in a micro flow channel on structural and conditional parameters.

Comprehensive analysis of the behavior of an amperometric biosensor incorporated in a micro flow channel was conducted by changing the structural and conditional parameters. The device used in the characterization consisted of a thin-film three-electrode system and a silicone rubber flow channel. An enzyme, glucose oxidase, was immobilized either at the bottom of the silicone rubber flow channel or on the electrode substrate. The flow rate, concentration, position of the immobilized enzyme, and channel height were changed, and the changes in the output current and the conversion efficiency were examined. When the flow rate and/or the channel height decreased, the output current and the conversion efficiency significantly increased. The conversion efficiency also increased by decreasing the concentration. The tendency of the flow dependence was reversed when the position of the immobilized enzyme was changed from the silicone rubber side to the electrode substrate. In addition, the influence of l-ascorbic acid was reduced by placing additional working electrodes in the upper stream. l-Ascorbic acid was eliminated more effectively as the flow rate decreased and the area of the working electrode for elimination increased.

Electrochemical determination of gamma-glutamyl transpeptidase activity and its application to a miniaturized analysis system.

A novel method to determine the activity of gamma-glutamyl transpeptidase (gamma-GTP) was developed. gamma-l-glutamyl-l-glutamate and glycyl-glycine were used as the substrates for gamma-GTP. l-glutamate produced by the enzymatic reaction was measured with an amperometric l-glutamate sensor. Following the mixing of the substrate solution and a sample solution, the current generated on the l-glutamate sensor continued to increase at a constant rate. The method was used to construct a miniaturized analysis system for the determination of gamma-GTP activity. The system consisted of the l-glutamate sensor formed on a glass substrate and a polydimethylsiloxane (PDMS) flow channel. Since the l-glutamate concentration in the solution increased as the solution was mobilized through the flow channel, a constant current increase was observed. The relation between the slope of the response curve and the activity of gamma-GTP was linear between 35 U l(-1) and 659 U l(-1). The rate analysis in the micro flow channel minimized the influence of interferents. The reproducibility of the output of the micro system was found to be good with a relative standard deviation (R.S.D.) of 5.6% at 659 U l(-1). The activities of gamma-GTP in human serum samples were also determined and compared with values obtained with a conventional spectroscopic method. The values obtained by the two methods were consistent with a correlation coefficient of 0.953.

Ultrasensitive electrochemical immunoassay for surface array protein, a Bacillus anthracis biomarker using Au-Pd nanocrystals loaded on boron-nitride nanosheets as catalytic labels.

Bacillus anthracis, the causative agent of anthrax, is a well known bioterrorism agent. The determination of surface array protein (Sap), a unique biomarker for B. anthracis can offer an opportunity for specific detection of B. anthracis in culture broth. In this study, we designed a new catalytic bionanolabel and fabricated a novel electrochemical immunosensor for ultrasensitive detection of B. anthracis Sap antigen. Bimetallic gold-palladium nanoparticles were in-situ grown on poly (diallyldimethylammonium chloride) functionalized boron nitride nanosheets (Au-Pd NPs@BNNSs) and conjugated with the mouse anti-B. anthracis Sap antibodies (Ab2); named Au-Pd NPs@BNNSs/Ab2. The resulting Au-Pd NPs@BNNSs/Ab2 bionanolabel demonstrated high catalytic activity towards reduction of 4-nitrophenol. The sensitivity of the electrochemical immunosensor along with redox cycling of 4-aminophenol to 4-quinoneimine was improved to a great extent. Under optimal conditions, the proposed immunosensor exhibited a wide working range from 5 pg/mL to 100 ng/mL with a minimum detection limit of 1 pg/mL B. anthracis Sap antigen. The practical applicability of the immunosensor was demonstrated by specific detection of Sap secreted by the B. anthracis in culture broth just after 1h of growth. These labels open a new direction for the ultrasensitive detection of different biological warfare agents and their markers in different matrices.

A rock-salt-type Li-based oxide, Li3Ni2RuO6, exhibiting a chaotic ferrimagnetism with cluster spin-glass dynamics and thermally frozen charge carriers.

The area of research to discover new Li containing materials and to understand their physical properties has been of constant interest due to applications potential for rechargeable batteries. Here, we present the results of magnetic investigations on a Li compound, Li3Ni2RuO6, which was believed to be a ferrimagnet below 80 K. While our neutron diffraction (ND) and isothermal magnetization (M) data support ferrimagnetism, more detailed magnetic studies establish that this ferrimagnetic phase exhibits some features similar to spin-glasses. In addition, we find another broad magnetic anomaly around 40-55 K in magnetic susceptibility (χ), attributable to cluster spin-glass phenomenon. Gradual dominance of cluster spin-glass dynamics with a decrease of temperature (T) and the apparent spread in freezing temperature suggest that the ferrimagnetism of this compound is a chaotic one. The absence of a unique freezing temperature for a crystalline material is interesting. In addition, pyroelectric current (Ipyro) data reveals a feature in the range 40-50 K, attributable to thermally stimulated depolarization current. We hope this finding motivates future work to explore whether there is any intriguing correlation of such a feature with cluster spin-glass dynamics. We attribute these magnetic and electric dipole anomalies to the crystallographic disorder, intrinsic to this compound.

Electrochemical immunosensor based on bismuth nanocomposite film and cadmium ions functionalized titanium phosphates for the detection of anthrax protective antigen toxin.

Bacillus anthracis is a bioterrorism agent classified by the Centers for Disease Control and Prevention (CDC). Herein, a novel electrochemical immunosensor for the sensitive, specific and easy detection of anthrax protective antigen (PA) toxin in picogram concentration was developed. The immunosensor consists of (i) a Nafion-multiwall carbon nanotubes-bismuth nanocomposite film modified glassy carbon electrodes (BiNPs/Nafion-MWCNTs/GCE) as a sensing platform and (ii) titanium phosphate nanoparticles-cadmium ion-mouse anti-PA antibodies (TiP-Cd(2+)-MαPA antibodies) as signal amplification tags. Scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), thermogravimmetric analysis (TGA), Fourier transform-infra red spectroscopy (FT-IR), zeta-potential analysis, electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were employed to characterize the synthesized TiP nanoparticles and modified electrode surfaces. The immunosensing performance of BiNPs/Nafion-MWCNTs/GCE was evaluated based on sandwich immunoassay protocol. A square wave voltammetry (SWV) scan from -1.2 to -0.3 V in HAc-NaAc buffer solution (pH 4.6) without stripping process was performed to record the electrochemical responses at -0.75 V corresponding to high content of Cd(2+) ions loaded in TiP nanoparticles for the measurement of PA toxin. Under optimal conditions, the currents increased with increasing PA toxin concentrations in spiked human serum samples and showed a linear range from 0.1 ng/ml to 100 ng/ml. The limit of detection of developed immunosensor was found to be 50 pg/ml at S/N=3. The total time of analysis was 35 min.

Electrochemical DNA sensor for anthrax toxin activator gene atxA-detection of PCR amplicons.

We report the DNA probe functionalized electrochemical genosensor for the detection of Bacillus anthracis, specific towards the regulatory gene atxA. The DNA sensor is fabricated on electrochemically deposited gold nanoparticle on self assembled layer of (3-Mercaptopropyl) trimethoxysilane (MPTS) on GC electrode. DNA hybridization is monitored by differential pulse voltammogram (DPV). The modified GC electrode is characterized by atomic force microscopy (AFM), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) method. We also quantified the DNA probe density on electrode surface by the chronocoulometric method. The detection is specific and selective for atxA gene by DNA probe on the electrode surface. No report is available for the detection of B. anthracis by using atxA an anthrax toxin activator gene. In the light of real and complex sample, we have studied the PCR amplicons of 303, 361 and 568 base pairs by using symmetric and asymmetric PCR approaches. The DNA probe of atxA gene efficiently hybridizes with different base pairs of PCR amplicons. The detection limit is found to be 1.0 pM (S/N ratio=3). The results indicate that the DNA sensor is able to detect synthetic target as well as PCR amplicons of different base pairs.

Electrochemical immunosensor for botulinum neurotoxin type-E using covalently ordered graphene nanosheets modified electrodes and gold nanoparticles-enzyme conjugate.

In this work, a novel electrochemical immunosensor was developed for the detection of botulinum neurotoxin-E (BoNT/E). This method relied on graphene nanosheets-aryldiazonium salt modified glassy carbon electrodes (GCE) as sensing platform and enzyme induced silver nanoparticles (AgNPs) deposited on gold nanoparticles (AuNPs) as signal amplifier. Herein, a GCE was electrografted with mixed monolayer of phenyl and aminophenyl (Ph-PhNH2/GCE) by diazotization reaction. Further, graphene nanosheets (GNS) were covalently attached on electrode surface (GNS/Ph-PhNH2/GCE). Field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), atomic force microscopy (AFM), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were employed to characterize synthesized graphene oxide and modified electrode surfaces. In the sandwich immunoassay format, the sensitivity was amplified using rabbit anti-mouse IgG-alkaline phosphatase (RαMIgG-ALP) functionalized with gold nanoparticles (RαMIgG-ALP/AuNPs). In order to study the immunosensing performance of GNS/Ph-PhNH2/GCE, first the capturing antibody (rabbit-anti BoNT/E antibody) was covalently immobilized via EDC/NHS chemistry. Further, the electrode was sequentially subjected to sample containing spiked BoNT/E, revealing antibody (mouse-anti BoNT/E) followed by RαMIgG-ALP/AuNPs. 3-indoxyl phosphate (3-IP) was used as substrate which finally reduces the silver ions. The deposited AgNPs on electrode surface were determined by linear sweep voltammetry (LSV). The developed electrochemical immunosensor could detect BoNT/E with linear range from 10pg/ml to 10ng/ml with the minimum detection limit of 5.0pg/ml and total analysis time of 65min. In addition, the immunosensor was successfully evaluated against food samples (orange juice and milk).