Modelling of exposure to respirable and inhalable welding fumes at German workplaces.

The International Agency for Research on Cancer classified welding fumes as carcinogenic to humans, and occupational exposure limits should be established to protect welders. The aim of this study is to estimate exposure levels to inhalable and respirable welding fumes by welding process to use them for exposure assessment in epidemiological studies and to derive occupational exposure limits. In total, 15,473 mass concentrations of inhalable and 9,161 concentrations of respirable welding fumes could be analyzed along with welding-related and sampling information, which were compiled in the German database MEGA between 1983 and 2016. In both particle-size fractions, model-based geometric means of the concentrations were estimated by welding process and material for frequently used welding processes adjusted for sampling time and median-centered for calendar years. The inhalable concentrations were approximately twice the respirable concentrations, with medians of 3 mg/m3 (inter-quartile range: 1.2-7.0 mg/m3) and 1.5 mg/m3 (inter-quartile range: < limit of detection -3.8 mg/m3), respectively. The adjusted geometric means of flux-cored arc welding, metal inert and active gas welding, shielded metal arc welding and torch cutting ranged from 0.9 to 2.2 mg/m3 for respirable welding fumes and from 2.3 to 4.7 mg/m3 for inhalable fumes. In both particle-size fractions, geometric means were between 0.1 and 0.9 mg/m3 when performing tungsten inert gas, autogeneous, resistance, laser, and plasma welding or spraying. Results derived from this large dataset are useful for a quantitative exposure assessment to estimate health risks of welders.

Are multitasking abilities impaired in welders exposed to manganese? Translating cognitive neuroscience to neurotoxicology.

Manganese (Mn) is an essential trace element with well characterized neurotoxic effects in high concentrations. Neurochemically, the initial neurotoxic effect of Mn is the perturbation of striatal γ-aminobutyric acid levels. Specific tasks for the assessment of cognitive functions subserved by fronto-striatal loops are available as the stop-change task (SCT) assessing control of multi-component behavior and action cascading. In a cross-sectional study, fifty male welders and 28 age-matched controls completed the SCT during a whole day examination. Reaction times, responses accuracy, and event-related potentials (ERPs) from electroencephalogram (EEG) recordings were analyzed. The shift exposure of the welders to respirable Mn was stratified by 20 µg/m3 in 23 low-exposed (median = 4.7 µg/m3) and 27 high-exposed welders (median = 86.0 µg/m3). Welders graduation was lower and was therefore included in the analyses. The task-related factor (stop-change delay, SCD) modified the responses as expected; however, the lack of an interaction "SCD × group" revealed no differences between welders and controls. EEG data showed that the "SCD" modulated the amplitude of the P3 ERP in controls stronger than in welders. There was no difference between the two groups of welders and no association between airborne or systemic Mn and the P3 ERP. Moreover, the P3 amplitude was smaller in subjects with lower education. These results showed that multitasking performance and cognitive flexibility are not impaired in welders. The electrophysiological results gave a weak hint that relevant neurobiological processes were different in welders as compared to controls but this may be related to lower education.

Analysis of inflammatory markers and metals in nasal lavage fluid of welders.

Welding fumes may produce adverse health effects in the respiratory tract. To assess the relationship between exposure to welding fumes and inflammation in the upper airways, 190 male welders were examined from the WELDOX study (median age 40 yr, 54.7% smokers, and 32.9% atopics). Inhalable welding fumes were collected in the breathing zone of welders during a single shift. Chromium (Cr), nickel (Ni), manganese (Mn), and iron (Fe) were measured in the welding-fume samples and in postshift nasal lavage fluid (NALF). In addition, the numbers of particles and inflammatory biomarkers, including total and differential cell counts, interleukin (IL)-8, leukotriene (LT) B4, 8-isoprostane (8-iso-PGF2α), tissue inhibitor of metalloproteinase-1 (TIMP-1), and immunoreactive matrix metalloproteinase (MMP)-9, were determined. Metal concentrations in NALF correlated with airborne concentrations. No significant association was found between airborne metal concentrations and biomarkers of inflammation in NALF, whereas increasing metal concentrations in NALF resulted in increased concentrations of total protein, IL-8, MMP-9, and TIMP-1. LTB4 and 8-iso PGF2α were elevated at higher concentrations of Cr or Ni in NALF. The same was true for Fe, although the effects were less pronounced and of borderline significance. In conclusion, our results showed a significant association between the concentrations of metals and soluble inflammatory markers in the NALF of welders. The noninvasive collection of NALF is applicable in field studies, where it may serve as a suitable matrix to simultaneously assess biomarkers of exposure and effect in the upper respiratory tract in workers who are occupationally exposed to airborne hazardous substances.

Oxidatively damaged guanosine in white blood cells and in urine of welders: associations with exposure to welding fumes and body iron stores.

The International Agency for Research on Cancer considers the carcinogenicity of welding fume of priority for re-evaluation. Genotoxic effects in experimental animals are still inconclusive. Here, we investigated the association of personal exposure to metals in respirable welding fumes during a working shift with oxidatively damaged guanosine in DNA of white blood cells (WBC) and in postshift urine samples from 238 welders. Medians of 8-oxo-7,8-dihydro-2'-deoxyguanosine (8-oxodGuo) were 2.35/10(6) dGuo in DNA of WBC and 4.33 µg/g creatinine in urine. The median of 8-oxo-7,8-dihydroguanosine (8-oxoGuo) was 7.03 µg/g creatinine in urine. The extent of both urinary parameters was higher in welders applying techniques with high particle emission rates to stainless steel than in tungsten inert gas welders (8-oxodGuo: 9.96 vs. 4.49 µg/L, 8-oxoGuo: 15.7 vs. 7.7 µg/L), but this apparent difference diminished after creatinine adjustment. We applied random intercept models to estimate the influence of airborne and systemic exposure to metals on oxidatively damaged guanosine in WBC and urine together with covariates. We observed a highly significant nonlinear association of urinary 8-oxoGuo with serum ferritin (P < 0.0001) and higher 8-oxoGuo concentrations for respirable iron >1,000 µg/m(3) compared to ≤57 µg/m(3). Similar effects were found for manganese. Airborne chromium but not nickel was associated with all oxidatively modified guanosine measures, whereas urinary chromium as well as nickel showed associations with urinary modified guanosines. In summary, oxidatively damaged urinary guanosine was associated with airborne and systemic exposure to metals in welders and showed a strong relation to body iron stores.

Reduction in welding fume and metal exposure of stainless steel welders: an example from the WELDOX study.

PURPOSE: In a plant where flux-cored arc welding was applied to stainless steel, we investigated changes in airborne and internal metal exposure following improvements of exhaust ventilation and respiratory protection. METHODS: Twelve welders were examined at a time in 2008 and in 2011 after improving health protection. Seven welders were enrolled in both surveys. Exposure measurement was performed by personal sampling of respirable welding fume inside the welding helmets during one work shift. Urine and blood samples were taken after the shift. Chromium (Cr), nickel (Ni), and manganese (Mn) were determined in air and biological samples. RESULTS: The geometric mean of respirable particles could be reduced from 4.1 mg/m(3) in 2008-0.5 mg/m(3) in 2011. Exposure to airborne metal compounds was also strongly reduced (Mn: 399 vs. 6.8 µg/m(3); Cr: 187 vs. 6.3 µg/m(3); Ni: 76 vs. 2.8 µg/m(3)), with the most striking reduction inside helmets with purified air supply. Area sampling revealed several concentrations above established or proposed exposure limits. Urinary metal concentrations were also reduced, but to a lesser extent (Cr: 14.8 vs. 4.5 µg/L; Ni: 7.9 vs. 3.1 µg/L). Although biologically regulated, the mean Mn concentration in blood declined from 12.8 to 8.9 µg/L. CONCLUSION: This intervention study demonstrated a distinct reduction in the exposure of welders using improved exhaust ventilation and welding helmets with purified air supply in the daily routine. Data from area sampling and biomonitoring indicated that the area background level may add considerably to the internal exposure.

Welding and lung cancer in a pooled analysis of case-control studies.

Several epidemiologic studies have indicated an increased risk of lung cancer among welders. We used the SYNERGY project database to assess welding as a risk factor for developing lung cancer. The database includes data on 15,483 male lung cancer cases and 18,388 male controls from 16 studies in Europe, Canada, China, and New Zealand conducted between 1985 and 2010. Odds ratios and 95% confidence intervals between regular or occasional welding and lung cancer were estimated, with adjustment for smoking, age, study center, and employment in other occupations associated with lung cancer risk. Overall, 568 cases and 427 controls had ever worked as welders and had an odds ratio of developing lung cancer of 1.44 (95% confidence interval: 1.25, 1.67) with the odds ratio increasing for longer duration of welding. In never and light smokers, the odds ratio was 1.96 (95% confidence interval: 1.37, 2.79). The odds ratios were somewhat higher for squamous and small cell lung cancers than for adenocarcinoma. Another 1,994 cases and 1,930 controls had ever worked in occupations with occasional welding. Work in any of these occupations was associated with some elevation of risk, though not as much as observed in regular welders. Our findings lend further support to the hypothesis that welding is associated with an increased risk of lung cancer.

Exposure to inhalable, respirable, and ultrafine particles in welding fume.

This investigation aims to explore determinants of exposure to particle size-specific welding fume. Area sampling of ultrafine particles (UFP) was performed at 33 worksites in parallel with the collection of respirable particles. Personal sampling of respirable and inhalable particles was carried out in the breathing zone of 241 welders. Median mass concentrations were 2.48 mg m(-3) for inhalable and 1.29 mg m(-3) for respirable particles when excluding 26 users of powered air-purifying respirators (PAPRs). Mass concentrations were highest when flux-cored arc welding (FCAW) with gas was applied (median of inhalable particles: 11.6 mg m(-3)). Measurements of particles were frequently below the limit of detection (LOD), especially inside PAPRs or during tungsten inert gas welding (TIG). However, TIG generated a high number of small particles, including UFP. We imputed measurements

Development of an exposure measurement database on five lung carcinogens (ExpoSYN) for quantitative retrospective occupational exposure assessment.

BACKGROUND: SYNERGY is a large pooled analysis of case-control studies on the joint effects of occupational carcinogens and smoking in the development of lung cancer. A quantitative job-exposure matrix (JEM) will be developed to assign exposures to five major lung carcinogens [asbestos, chromium, nickel, polycyclic aromatic hydrocarbons (PAH), and respirable crystalline silica (RCS)]. We assembled an exposure database, called ExpoSYN, to enable such a quantitative exposure assessment. METHODS: Existing exposure databases were identified and European and Canadian research institutes were approached to identify pertinent exposure measurement data. Results of individual air measurements were entered anonymized according to a standardized protocol. RESULTS: The ExpoSYN database currently includes 356 551 measurements from 19 countries. In total, 140 666 personal and 215 885 stationary data points were available. Measurements were distributed over the five agents as follows: RCS (42%), asbestos (20%), chromium (16%), nickel (15%), and PAH (7%). The measurement data cover the time period from 1951 to present. However, only a small portion of measurements (1.4%) were performed prior to 1975. The major contributing countries for personal measurements were Germany (32%), UK (22%), France (14%), and Norway and Canada (both 11%). CONCLUSIONS: ExpoSYN is a unique occupational exposure database with measurements from 18 European countries and Canada covering a time period of >50 years. This database will be used to develop a country-, job-, and time period-specific quantitative JEM. This JEM will enable data-driven quantitative exposure assessment in a multinational pooled analysis of community-based lung cancer case-control studies.

Occupational Exposure to Inhalable Manganese at German Workplaces.

Due to mounting evidence of neurotoxic effects of manganese (Mn) already at low concentrations, occupational exposure limits (OELs) have been adopted. We analyzed 5771 personal measurements of inhalable manganese (Mn) together with information on sampling conditions and job tasks from the German exposure database Messdaten zur Exposition gegenüber Gefahrstoffen am Arbeitsplatz (MEGA) to assess exposure levels in welders and other occupations between 1989 and 2015. Geometric means (GMs) of exposure to Mn were estimated for various occupational settings adjusted for 2-h sampling duration and analytical method, centered at 2009. Measurements below the limit of quantification (LOQ) were multiply imputed. The median concentration was 74 µg m-3 (inter-quartile range 14-260 µg m-3) in welders and 8 µg m-3 (inter-quartile range 100 µg m-3 were observed in gas metal and flux-cored arc welders and in shielded metal arc welders using consumables of high Mn content (>5%). Tungsten inert gas welding, laser welding and working in other occupations such as foundry worker, electroplater, or grinder were associated with GMs <10 µg m-3. A shorter sampling duration was associated with higher Mn concentrations. High-emission welding techniques require protective measures to cope with adopted OELs. Results of this study are useful to assess cumulative Mn exposure in community-based studies on neurotoxic effects.

Modelling of occupational exposure to inhalable nickel compounds.

The aim of this study was to estimate average occupational exposure to inhalable nickel (Ni) using the German exposure database MEGA. This database contains 8052 personal measurements of Ni collected between 1990 and 2009 in adjunct with information on the measurement and workplace conditions. The median of all Ni concentrations was 9 µg/m3 and the 95th percentile was 460 µg/m3. We predicted geometric means (GMs) for welders and other occupations centered to 1999. Exposure to Ni in welders is strongly influenced by the welding process applied and the Ni content of the used welding materials. Welding with consumable electrodes of high Ni content (>30%) was associated with 10-fold higher concentrations compared with those with a low content (<5%). The highest exposure levels (GMs ≥20 µg/m3) were observed in gas metal and shielded metal arc welders using welding materials with high Ni content, in metal sprayers, grinders and forging-press operators, and in the manufacture of batteries and accumulators. The exposure profiles are useful for exposure assessment in epidemiologic studies as well as in industrial hygiene. Therefore, we recommend to collect additional exposure-specific information in addition to the job title in community-based studies when estimating the health risks of Ni exposure.

Occupational Exposure to Manganese and Fine Motor Skills in Elderly Men: Results from the Heinz Nixdorf Recall Study.

OBJECTIVES: Exposure to manganese (Mn) may cause movement disorders, but less is known whether the effects persist after the termination of exposure. This study investigated the association between former exposure to Mn and fine motor deficits in elderly men from an industrial area with steel production. METHODS: Data on the occupational history and fine motor tests were obtained from the second follow-up of the prospective Heinz Nixdorf Recall Study (2011-2014). The study population included 1232 men (median age 68 years). Mn in blood (MnB) was determined in archived samples (2000-2003). The association between Mn exposure (working as welder or in other at-risk occupations, cumulative exposure to inhalable Mn, MnB) with various motor functions (errors in line tracing, steadiness, or aiming and tapping hits) was investigated with Poisson and logistic regression, adjusted for iron status and other covariates. Odds ratios (ORs) with 95% confidence intervals (CIs) were estimated for substantially impaired dexterity (errors >90th percentile, tapping hits <10th percentile). RESULTS: The median of cumulative exposure to inhalable Mn was 58 µg m-3 years in 322 men who ever worked in at-risk occupations. Although we observed a partly better motor performance of exposed workers at group level, we found fewer tapping hits in men with cumulative Mn exposure >184.8 µg m-3 years (OR 2.15, 95% CI 1.17-3.94). MnB ≥ 15 µg l-1, serum ferritin ≥ 400 µg l-1, and gamma-glutamyl transferase ≥74 U l-1 were associated with a greater number of errors in line tracing. CONCLUSIONS: We found evidence that exposure to inhalable Mn may carry a risk for dexterity deficits. Whether these deficits can be exclusively attributed to Mn remains to be elucidated, as airborne Mn is strongly correlated with iron in metal fumes, and high ferritin was also associated with errors in line tracing. Furthermore, hand training effects must be taken into account when testing for fine motor skills.

Associations between former exposure to manganese and olfaction in an elderly population: Results from the Heinz Nixdorf Recall Study.

Occupational exposure to manganese (Mn) has been associated with impairments in olfaction and motor functions, but it has yet to be determined if such effects persist upon cessation of exposure. The objective of this study was to evaluate the influence of former occupational Mn exposure on olfaction within the framework of a prospective cohort study among an elderly German population. Information on job tasks with recognized Mn exposure and data on odor identification assessed with Sniffin' sticks was collected during the second follow-up of the Heinz Nixdorf Recall Study. The study population consisted of 1385 men aged 55-86 years, 354 of whom ever worked in jobs with potential Mn exposure (median 58.3µg/m3 years, interquartile range 19.0-185µg/m3 years). Multiple exposure measures, including job tasks, cumulative Mn exposure, and Mn determined in blood samples (MnB) archived at baseline, were used to estimate effects of Mn on olfaction. Having ever worked as welder was associated with better olfaction compared to other blue-collar workers without Mn exposure. Blue-collar workers identified less odors in comparison to white-collar workers. Concentrations of previous Mn exposure >185µg/m3 years or MnB ≥15µg/L were not associated with impaired olfaction. In addition to a strong age effect, participants with lower occupational qualification identified less odors. We found no relevant association of former Mn exposure at relatively low levels with impaired olfaction. Possible neurotoxic Mn effects may not be persistent after cessation.

Airborne exposure to inhalable hexavalent chromium in welders and other occupations: Estimates from the German MEGA database.

This study aimed to estimate occupational exposure to inhalable hexavalent chromium (Cr(VI)) using the exposure database MEGA. The database has been compiling Cr(VI) concentrations and ancillary data about measurements at German workplaces. We analysed 3659 personal measurements of inhalable Cr(VI) collected between 1994 and 2009. Cr(VI) was determined spectrophotometrically at 540 nm after reaction with diphenylcarbazide. We assigned the measurements to pre-defined at-risk occupations using the information provided about the workplaces. Two-thirds of the measurements were below the limit of quantification (LOQ) and multiply imputed according to the distribution above LOQ. The 75th percentile value was 5.2 µg/m(3) and the 95th percentile was 57.2 µg/m(3). We predicted the geometric mean for 2h sampling in the year 2000, and the time trend of Cr(VI) exposure in these settings with and without adjustment for the duration of measurements. The largest dataset was available for welding (N = 1898), which could be further detailed according to technique. The geometric means were above 5 µg/m(3) in the following situations: spray painting, shielded metal arc welding, and flux-cored arc welding if applied to stainless steel. The geometric means were between 1 µg/m(3) and 5 µg/m(3) for gas metal arc welding of stainless steel, cutting, hard-chromium plating, metal spraying and in the chemical chromium industry. The exposure profiles described here are useful for epidemiologic and industrial health purposes. Exposure to Cr(VI) varies not only between occupations, but also within occupations as shown for welders. In epidemiologic studies, it would be desirable to collect exposure-specific information in addition to the job title.

Levels and predictors of airborne and internal exposure to chromium and nickel among welders--results of the WELDOX study.

The objective of this analysis was to investigate levels and determinants of exposure to airborne and urinary chromium (Cr, CrU) and nickel (Ni, NiU) among 241 welders. Respirable and inhalable welding fume was collected during a shift, and the metal content was determined using inductively coupled plasma mass spectrometry. In post-shift urine, CrU and NiU were measured by means of graphite furnace atom absorption spectrometry, with resulting concentrations varying across a wide range. Due to a large fraction below the limits of quantitation we applied multiple imputations to the log-transformed exposure variables for the analysis of the data. Respirable Cr and Ni were about half of the concentrations of inhalable Cr and Ni, respectively. CrU and NiU were determined with medians of 1.2 µg/L (interquartile range <1.00; 3.61) and 2.9 µg/L (interquartile range <1.50; 5.97). Furthermore, Cr and Ni correlated in respirable welding fume (r=0.79, 95% CI 0.74-0.85) and urine (r=0.55, 95% CI 0.44-0.65). Regression models identified exposure-modulating variables in form of multiplicative factors and revealed slightly better model fits for Cr (R(2) respirable Cr 48%, CrU 55%) than for Ni (R(2) respirable Ni 42%, NiU 38%). The air concentrations were mainly predicted by the metal content in electrodes or base material in addition to the welding technique. Respirable Cr and Ni were good predictors for CrU and NiU, respectively. Exposure was higher when welding was performed in confined spaces or with inefficient ventilation, and lower in urine when respirators were used. In conclusion, statistical modelling allowed the evaluation of determinants of internal and external exposure to Cr and Ni in welders. Welding parameters were stronger predictors than workplace conditions. Airborne exposure was lowest inside respirators with supply of purified air.

Levels and predictors of airborne and internal exposure to manganese and iron among welders.

We investigated airborne and internal exposure to manganese (Mn) and iron (Fe) among welders. Personal sampling of welding fumes was carried out in 241 welders during a shift. Metals were determined by inductively coupled plasma mass spectrometry. Mn in blood (MnB) was analyzed by graphite furnace atom absorption spectrometry. Determinants of exposure levels were estimated with multiple regression models. Respirable Mn was measured with a median of 62 (inter-quartile range (IQR) 8.4-320) µg/m(3) and correlated with Fe (r=0.92, 95% CI 0.90-0.94). Inhalable Mn was measured with similar concentrations (IQR 10-340 µg/m(3)). About 70% of the variance of Mn and Fe could be explained, mainly by the welding process. Ventilation decreased exposure to Fe and Mn significantly. Median concentrations of MnB and serum ferritin (SF) were 10.30 µg/l (IQR 8.33-13.15 µg/l) and 131 µg/l (IQR 76-240 µg/l), respectively. Few welders were presented with low iron stores, and MnB and SF were not correlated (r=0.07, 95% CI -0.05 to 0.20). Regression models revealed a significant association of the parent metal with MnB and SF, but a low fraction of variance was explained by exposure-related factors. Mn is mainly respirable in welding fumes. Airborne Mn and Fe influenced MnB and SF, respectively, in welders. This indicates an effect on the biological regulation of both metals. Mn and Fe were strongly correlated, whereas MnB and SF were not, likely due to higher iron stores among welders.

Suitability of the limit dose in evaluating reproductive toxicity of substances and preparations.

An oral dose of 1000 mg/kg body weight/day is mentioned in Organisation for Economic Cooperation and Development (OECD) and European Union (EU) guidelines as a default maximum dose in limit tests for studies on reproductive toxicity. This paper investigated whether upper range human exposure data from the workplace are supportive of this limit dose as an upper limit of possible human exposure. To this end, published exposure data as well as data from the database MEGA of the German "Berufsgenossenschaften" were evaluated. These data indicate that exposure concentrations in the range of 500 to 2000 mg/m(3) (time-weighted averages) can be considered high human exposures to volatile compounds. Inhalation exposure to aerosols and dermal exposure result in lower dose levels. By applying suitable extrapolation factors, it was concluded that occupational exposures up to 325 mg/m(3) can reliably be assessed with limit tests using a dose level of 1000 mg/kg/day. The limit dose has been proposed for use in the EU as a starting point to derive specific concentration limits for hazard classification of preparations containing reproductive toxicants, with the objective to consider the potency of the substances. This analysis shows that for some groups of chemicals, instead of the limit dose, the putative maximum levels of human exposure should be taken into account when deriving concentration limits for the classification of preparations. Furthermore, possible deviations from a linear correlation between concentration in the preparation and exposure should be considered.