Macrophages morphology and cytokine reeducation by ex situ copper thiol complexes.

OBJECTIVE: To study the reeducation effect of copper thiol complexes on macrophage morphology and cytokine expression. METHODS: The effect of copper thiol complexes was assessed on murine macrophages by the cell morphology observed through optical microscopy, while the expression of cytokines by protein abundance after stimulation. A viability experiment was performed on PMBC to confirm that copper complexes do not affect other cells. RESULTS: The M1 shape was reported after treatment with copper thiol complexes at 1-200 µM, while M2 behavior was documented between 50 and 800 µM. Surprisingly, a thin elongate morphology was observed between 400-800 µM like the M2 shape. The expression of M1 cytokines was noted ranging from 1 to 100 µM, with the highest yield at 1 µM (2243 pg/µL) for the copper-penicillamine complex. M2 production behavior was observed at 1-800 µM, with the highest abundance close to 1150 pg/µL (200-400 µM) was quantified from the copper-cysteine complex. Finally, LCCu complexes did not induce a cytotoxic response on PBMC while exhibiting a high IL-4 and IL-10 production, similar to their gold analogs. CONCLUSIONS: The capacity of copper thiol complexes to reeducate M1 to M2 morphoexpression can be promising for cell protection by using copper thiol penicillamine or immuno-regeneration of tissues when using copper thiol cysteine.

Effect of the rigid segment content on the properties of segmented polyurethanes conjugated with atorvastatin as chain extender.

Segmented polyurethanes were prepared with polycaprolactone diol as soft segment and various amounts of 4,4´-Methylenebis(cyclohexyl isocyanate) and atorvastatin, a statin used for lowering cholesterol, in order to obtain SPU with different content of rigid segments. Polyurethanes with 35% or 50% of rigid segment content were physicochemically characterized and their biocompatibility assessed with L929 fibroblasts. High concentrations of atorvastatin were incorporated by increasing the content of rigid segments as shown by FTIR, Raman, NMR, XPS and EDX. Thermal and mechanical characterization showed that polyurethanes containing atorvastatin and 35% of rigid segments were low modulus (13 MPa) semicrystalline polymers as they exhibited a glass transition temperature (Tg) at -38 °C, melting temperature (Tm) at 46 °C and crystallinity close to 35.9% as determined by DSC. In agreement with this, X-ray diffraction showed reflections at 21.3° and 23.6° for PCL without reflections for atorvastatin suggesting its presence in amorphous form with higher potential bioavailability. Low content of rigid segments led to highly degradable polymer in acidic, alkaline and oxidative media with an acceptable fibroblast cytotoxicity up to 7 days possibly due to low atorvastatin content.

Human mesenchymal stem cell behavior on segmented polyurethanes prepared with biologically active chain extenders.

The development of elastomeric, bioresorbable and biocompatible segmented polyurethanes (SPUs) for use in tissue-engineering applications has attracted considerable interest because of the existing need of mechanically tunable scaffolds for regeneration of different tissues, but the incorporation of osteoinductive molecules into SPUs has been limited. In this study, SPUs were synthesized from poly (ε-caprolactone)diol, 4,4'-methylene bis(cyclohexyl isocyanate) using biologically active compounds such as ascorbic acid, L-glutamine, ß-glycerol phosphate, and dexamethasone as chain extenders. Fourier transform infrared spectroscopy (FTIR) revealed the formation of both urethanes and urea linkages while differential scanning calorimetry, dynamic mechanical analysis, X-ray diffraction and mechanical testing showed that these polyurethanes were semi-crystalline polymers exhibiting high deformations. Cytocompatibility studies showed that only SPUs containing ß-glycerol phosphate supported human mesenchymal stem cell adhesion, growth, and osteogenic differentiation, rendering them potentially suitable for bone tissue regeneration, whereas other SPUs failed to support either cell growth or osteogenic differentiation, or both. This study demonstrates that modification of SPUs with osteogenic compounds can lead to new cytocompatible polymers for regenerative medicine applications.

Preparation and bioactive properties of nano bioactive glass and segmented polyurethane composites.

Composites of glutamine-based segmented polyurethanes with 5 to 25 wt.% bioactive glass nanoparticles were prepared, characterized, and their mineralization potential was evaluated in simulated body fluid. Biocompatibility with dental pulp stem cells was assessed by MTS to an extended range of compositions (1 to 25 wt.% of bioactive glass nanoparticles). Physicochemical characterization showed that composites retained many of the matrix properties, i.e. those corresponding to semicrystalline elastomeric polymers as they exhibited a glass transition temperature (Tg) between -41 and -36℃ and a melting temperature (Tm) between 46 and 49℃ in agreement with X-ray reflections at 23.6° and 21.3°. However, with bioactive glass nanoparticles addition, tensile strength and strain were reduced from 22.2 to 12.2 MPa and 667.2 to 457.8%, respectively with 25 wt.% of bioactive glass nanoparticles. Although Fourier transform infrared spectroscopy did not show evidence of mineralization after conditioning of these composites in simulated body fluid, X-ray diffraction, scanning electron microscopy, and energy dispersive X-ray microanalysis showed the formation of an apatite layer on the surface which increased with higher bioactive glass concentrations and longer conditioning time. Dental pulp stem cells proliferation at day 5 was improved in bioactive glass nanoparticles composites containing lower amounts of the filler (1-2.5 wt.%) but it was compromised at day 9 in composites containing high contents of nBG (5, 15, 25 wt.%). However, Runx2 gene expression was particularly upregulated for the dental pulp stem cells cultured with composites loaded with 15 and 25 wt.% of bioactive glass nanoparticles. In conclusion, low content bioactive glass nanoparticles and segmented polyurethanes composites deserve further investigation for applications such as guided bone regeneration membranes, where osteoconductivity is desirable but not a demanding mechanical performance.