The Plasmodium falciparum Cell-Traversal Protein for Ookinetes and Sporozoites as a Candidate for Preerythrocytic and Transmission-Blocking Vaccines.

Recent studies have shown that immune responses against the cell-traversal protein for Plasmodium ookinetes and sporozoites (CelTOS) can inhibit parasite infection. While these studies provide important evidence toward the development of vaccines targeting this protein, it remains unknown whether these responses could engage the Plasmodium falciparum CelTOS in vivo Using a newly developed rodent malaria chimeric parasite expressing the P. falciparum CelTOS (PfCelTOS), we evaluated the protective effect of in vivo immune responses elicited by vaccination and assessed the neutralizing capacity of monoclonal antibodies specific against PfCelTOS. Mice immunized with recombinant P. falciparum CelTOS in combination with the glucopyranosyl lipid adjuvant-stable emulsion (GLA-SE) or glucopyranosyl lipid adjuvant-liposome-QS21 (GLA-LSQ) adjuvant system significantly inhibited sporozoite hepatocyte infection. Notably, monoclonal antibodies against PfCelTOS strongly inhibited oocyst development of P. falciparum and Plasmodium berghei expressing PfCelTOS in Anopheles gambiae mosquitoes. Taken together, our results demonstrate that anti-CelTOS responses elicited by vaccination or passive immunization can inhibit sporozoite and ookinete infection and impair vector transmission.

Lyophilization of an Adjuvanted Mycobacterium tuberculosis Vaccine in a Single-Chamber Pharmaceutical Cartridge.

Although substantial effort has been made in the development of next-generation recombinant vaccine systems, maintenance of a cold chain is still typically required and remains a critical challenge in effective vaccine distribution. The ability to engineer alternative containment systems that improve distribution and administration represents potentially significant enhancements to vaccination strategies. In this work, we evaluate the ability to successfully lyophilize a previously demonstrated thermostable tuberculosis vaccine formulation (ID93 + GLA-SE) in a cartridge format compared to a traditional vial container format. Due to differences in the shape of the container formats, a novel apparatus was developed to facilitate lyophilization in a cartridge. Following lyophilization, the lyophilizate was assessed visually, by determining residual moisture content, and by collecting melting profiles. Reconstituted formulations were assayed for particle size, protein presence, and GLA content. Based on assessment of the lyophilizate, the multicomponent vaccine was successfully lyophilized in both formats. Also, the physicochemical properties of the major components in the formulation, including antigen and adjuvant, were retained after lyophilization in either format. Ultimately, this study demonstrates that complex formulations can be lyophilized in alternative container formats to the standard pharmaceutical glass vial, potentially helping to increase the distribution of vaccines.

Optimizing manufacturing and composition of a TLR4 nanosuspension: physicochemical stability and vaccine adjuvant activity.

BACKGROUND: Nanosuspensions are an important class of delivery system for vaccine adjuvants and drugs. Previously, we developed a nanosuspension consisting of the synthetic TLR4 ligand glucopyranosyl lipid adjuvant (GLA) and dipalmitoyl phosphatidylcholine (DPPC). This nanosuspension is a clinical vaccine adjuvant known as GLA-AF. We examined the effects of DPPC supplier, buffer composition, and manufacturing process on GLA-AF physicochemical and biological activity characteristics. RESULTS: DPPC from different suppliers had minimal influence on physicochemical and biological effects. In general, buffered compositions resulted in less particle size stability compared to unbuffered GLA-AF. Microfluidization resulted in rapid particle size reduction after only a few passes, and 20,000 or 30,000 psi processing pressures were more effective at reducing particle size and recovering the active component than 10,000 psi. Sonicated and microfluidized batches maintained good particle size and chemical stability over 6 months, without significantly altering in vitro or in vivo bioactivity of GLA-AF when combined with a recombinant malaria vaccine antigen. CONCLUSIONS: Microfluidization, compared to water bath sonication, may be an effective manufacturing process to improve the scalability and reproducibility of GLA-AF as it advances further in the clinical development pathway. Various sources of DPPC are suitable to manufacture GLA-AF, but buffered compositions of GLA-AF do not appear to offer stability advantages over the unbuffered composition.

Immunomodulatory and physical effects of phospholipid composition in vaccine adjuvant emulsions.

Egg phosphatidylcholine is commonly used as an emulsifier in formulations administered parenterally. However, synthetic phosphatidylcholine (PC) emulsifiers are now widely available and may be desirable substitutes for egg-derived phospholipids due to stability, purity, and material source considerations. In earlier work, we demonstrated that a squalene-1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) emulsion provided equivalent physical stability compared to a squalene-egg PC emulsion. In the present manuscript, we evaluate the physical stability of vaccine adjuvant emulsions containing a range of other synthetic phosphatidylcholine emulsifiers. Besides the POPC emulsion, the 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) emulsion showed good particle size and visual stability compared to emulsions made with other synthetic phospholipids. Moreover, comparable immune responses were elicited by squalene emulsions employing various synthetic PC or egg PC emulsifiers in combination with an inactivated influenza vaccine or a recombinant malaria antigen, and these responses were generally enhanced compared to antigen without adjuvant. Therefore, we show that (1) some synthetic PCs (DMPC, POPC, and to a lesser extent 1,2-dioleoyl-sn-glycero-3-phosphocholine) are effective stabilizers of squalene emulsion over a range of storage temperatures while others are not (1,2-distearoyl-sn-glycero-3-phosphocholine, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine, and 1,2-dilauroyl-sn-glycero-3-phosphocholine) and (2) the immunogenicity of stable squalene emulsions is similar regardless of PC source.

Evaluation of the safety and immunogenicity in rhesus monkeys of a recombinant malaria vaccine for Plasmodium vivax with a synthetic Toll-like receptor 4 agonist formulated in an emulsion.

Plasmodium vivax is the major cause of malaria outside sub-Saharan Africa and inflicts debilitating morbidity and consequent economic impacts in developing countries. In order to produce a P. vivax vaccine for global use, we have previously reported the development of a novel chimeric recombinant protein, VMP001, based on the circumsporozoite protein (CSP) of P. vivax. Very few adjuvant formulations are currently available for human use. Our interest is to evaluate second-generation vaccine formulations to identify novel combinations of adjuvants capable of inducing strong, long-lasting immune responses. In this study rhesus monkeys were immunized intramuscularly three times with VMP001 in combination with a stable emulsion (SE) or a synthetic Toll-like receptor 4 (TLR4) agonist (glucopyranosyl lipid A [GLA]) in SE (GLA-SE). Sera and peripheral blood mononuclear cells (PBMCs) were tested for the presence of antigen-specific humoral and cellular responses, respectively. All groups of monkeys generated high titers of anti-P. vivax IgG antibodies, as detected by enzyme-linked immunosorbent assays (ELISAs) and immunofluorescence assays. In addition, all groups generated a cellular immune response characterized by antigen-specific CD4(+) T cells secreting predominantly interleukin-2 (IL-2) and lesser amounts of tumor necrosis factor (TNF). We conclude that the combination of VMP001 and GLA-SE is safe and immunogenic in monkeys and may serve as a potential second-generation vaccine candidate against P. vivax malaria.

Effects of emulsifier concentration, composition, and order of addition in squalene-phosphatidylcholine oil-in-water emulsions.

Development and characterization of stable and biocompatible oil-in-water emulsions is important for improved drug and vaccine delivery. In this work, two-component emulsions consisting of squalene and phosphatidylcholine have been developed. The reproducibility of the manufacturing process is established and production efficiency is improved by altering the order of component addition. The effects of emulsifier concentration and composition on emulsion stability and biocompatibility are assessed through dynamic light scattering, zeta potential measurement, viscosity, and hemolytic activity. High concentrations of egg phosphatidylcholine emulsifier decreased initial particle size and increased initial size polydispersity. However, high emulsifier concentrations also appeared to decrease long-term emulsion stability as well as absolute zeta potential values. Substitution of naturally derived egg phosphatidylcholine with synthetic 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) produced an emulsion with similar physicochemical properties and stability.

Identification of human T cell antigens for the development of vaccines against Mycobacterium tuberculosis.

Development of a subunit vaccine for Mycobacterium tuberculosis (Mtb) depends on the identification of Ags that induce appropriate T cell responses. Using bioinformatics, we selected a panel of 94 Mtb genes based on criteria that included growth in macrophages, up- or down-regulation under hypoxic conditions, secretion, membrane association, or because they were members of the PE/PPE or EsX families. Recombinant proteins encoded by these genes were evaluated for IFN-gamma recall responses using PBMCs from healthy subjects previously exposed to Mtb. From this screen, dominant human T cell Ags were identified and 49 of these proteins, formulated in CpG, were evaluated as vaccine candidates in a mouse model of tuberculosis. Eighteen of the individual Ags conferred partial protection against challenge with virulent Mtb. A combination of three of these Ags further increased protection against Mtb to levels comparable to those achieved with bacillus Calmette-Guérin vaccination. Vaccine candidates that led to reduction in lung bacterial burden following challenge-induced pluripotent CD4 and CD8 T cells, including Th1 cell responses characterized by elevated levels of Ag-specific IgG2c, IFN-gamma, and TNF. Priority vaccine Ags elicited pluripotent CD4 and CD8 T responses in purified protein derivative-positive donor PBMCs. This study identified numerous novel human T cell Ags suitable to be included in subunit vaccines against tuberculosis.

Protection against intestinal amebiasis by a recombinant vaccine is transferable by T cells and mediated by gamma interferon.

We have previously shown that vaccination with purified Entamoeba histolytica Gal/GalNAc lectin or recombinant subunits can protect mice from intestinal amebiasis upon intracecal challenge. In this study, we demonstrated with adoptive-transfer experiments that this lectin vaccine protection is mediated by T cells but not serum. The cell-mediated immune (CMI) response was characterized by significant gamma interferon (IFN-gamma), interleukin 12 (IL-12), IL-2, IL-10, and IL-17 production. To move toward a human vaccine, we switched to a recombinant protein and tested a range of adjuvants and routes appropriate for humans. We found that subcutaneous delivery of LecA with IDRI's adjuvant system EM014 elicited a potent Th1-type CMI profile and provided significant protection, as measured by culture negativity (79% efficacy); intranasal immunization with cholera toxin provided 56% efficacy; and alum induced a Th2-type response that protected 62 to 68% of mice. Several antibody and CMI cytokine responses were examined for correlates of protection, and prechallenge IFN-gamma(+) or IFN-gamma-, IL-2-, and tumor necrosis factor alpha-triple-positive CD4 cells in blood were statistically associated with protection. To test the role of IFN-gamma in LecA-mediated protection, we neutralized IFN-gamma in LecA-immunized mice and found that it abrogated the protection conferred by vaccination. These data demonstrate that CMI is sufficient for vaccine protection from intestinal amebiasis and reveal an important role for IFN-gamma, even in the setting of alum.

Monitoring the effects of component structure and source on formulation stability and adjuvant activity of oil-in-water emulsions.

Oil-in-water emulsions have shown promise as safe and effective adjuvant formulations for vaccines. In particular, formulations consisting of metabolizable oils such as shark-derived squalene and detergents such as egg phosphatidylcholine have been used to produce stable vaccine emulsion formulations. However, there is an emphasis in pharmaceutical regulatory bodies on using synthetic or plant-derived components from sustainable sources instead of animal-derived components. This study compares the physicochemical properties and biological efficacy of emulsions consisting of oil and detergent components from animal, plant, and synthetic sources. In particular, effects of component structure and source on emulsion stability and biological activity are examined. It is shown that oil-in-water emulsions using animal-derived components can be substituted with synthetic or plant-derived materials while still exhibiting satisfactory physicochemical and biological properties.

Development of a thermostable nanoemulsion adjuvanted vaccine against tuberculosis using a design-of-experiments approach.

BACKGROUND: Adjuvants have the potential to increase the efficacy of protein-based vaccines but need to be maintained within specific temperature and storage conditions. Lyophilization can be used to increase the thermostability of protein pharmaceuticals; however, no marketed vaccine that contains an adjuvant is currently lyophilized, and lyophilization of oil-in-water nanoemulsion adjuvants presents a specific challenge. We have previously demonstrated the feasibility of lyophilizing a candidate adjuvanted protein vaccine against Mycobacterium tuberculosis (Mtb), ID93 + GLA-SE, and the subsequent improvement of thermostability; however, further development is required to prevent physicochemical changes and degradation of the TLR4 agonist glucopyranosyl lipid adjuvant formulated in an oil-in-water nanoemulsion (SE). MATERIALS AND METHODS: In this study, we took a systematic approach to the development of a thermostable product by first identifying compatible solution conditions and stabilizing excipients for both antigen and adjuvant. Next, we applied a design-of-experiments approach to identify stable lyophilized drug product formulations. RESULTS: We identified specific formulations that contain disaccharide or a combination of disaccharide and mannitol that can achieve substantially improved thermostability and maintain immunogenicity in a mouse model when tested in accelerated and real-time stability studies. CONCLUSION: These efforts will aid in the development of a platform formulation for use with other similar vaccines.

Technology transfer of oil-in-water emulsion adjuvant manufacturing for pandemic influenza vaccine production in Romania: Preclinical evaluation of split virion inactivated H5N1 vaccine with adjuvant.

Millions of seasonal and pandemic influenza vaccine doses containing oil-in-water emulsion adjuvant have been administered in order to enhance and broaden immune responses and to facilitate antigen sparing. Despite the enactment of a Global Action Plan for Influenza Vaccines and a multi-fold increase in production capabilities over the past 10 years, worldwide capacity for pandemic influenza vaccine production is still limited. In developing countries, where routine influenza vaccination is not fully established, additional measures are needed to ensure adequate supply of pandemic influenza vaccines without dependence on the shipment of aid from other, potentially impacted first-world countries. Adaptation of influenza vaccine and adjuvant technologies by developing country influenza vaccine manufacturers may enable antigen sparing and corresponding increases in global influenza vaccine coverage capacity. Following on previously described work involving the technology transfer of oil-in-water emulsion adjuvant manufacturing to a Romanian vaccine manufacturing institute, we herein describe the preclinical evaluation of inactivated split virion H5N1 influenza vaccine with emulsion adjuvant, including immunogenicity, protection from virus challenge, antigen sparing capacity, and safety. In parallel with the evaluation of the bioactivity of the tech-transferred adjuvant, we also describe the impact of concurrent antigen manufacturing optimization activities. Depending on the vaccine antigen source and manufacturing process, inclusion of adjuvant was shown to enhance and broaden functional antibody titers in mouse and rabbit models, promote protection from homologous virus challenge in ferrets, and facilitate antigen sparing. Besides scientific findings, the operational lessons learned are delineated in order to facilitate adaptation of adjuvant technologies by other developing country institutes to enhance global pandemic influenza preparedness.

Serum antibodies to lipophilin B detected in late stage breast cancer patients.

Lipophilin B mRNA is overexpressed in approximately 70% of breast tumors and shows a high degree of correlation with the mRNA expression profile of mammaglobin. This is further supported by the recent finding that, like other members of the secretoglobulin-uteroglobin family, mammaglobin and lipophilin B form a heteroduplex. The studies described show that there are pre-existing antibodies to lipophilin B peptide in the sera of breast cancer patients with different stages and grade of tumor and that this response is different from that seen to recombinant mammaglobin and native mammaglobin-lipophilin B complex. The highest titers were observed in later stage tumors. In addition, low levels of antibody were also seen in some patients with prostate and ovarian cancers, consistent with lipophilin B mRNA expression in these tumors at lower abundance than in breast tumors. In contrast, lipophilin B antibodies were absent in 20 healthy donor sera and 30 lung cancer sera. A polymorphism identified in Lipophilin B did not appear to influence human sera reactivity. The data indicate that humoral immune responses to lipophilin B may serve as a diagnostic indicator, particularly for breast cancer.

Quantitative measurement of Toll-like receptor 4 agonists adsorbed to Alhydrogel(®) by Fourier transform infrared-attenuated total reflectance spectroscopy.

Aluminum salts have a long history as safe and effective vaccine adjuvants. In addition, aluminum salts have high adsorptive capacities for vaccine antigens and adjuvant molecules, for example, Toll-like receptor 4 (TLR4) agonists. However, the physicochemical properties of aluminum salts make direct quantitation of adsorbed molecules challenging. Typical methods for quantifying adsorbed molecules require advanced instrumentation, extreme sample processing, often destroy the sample, or rely on an indirect measurement. A simple, direct, and quantitative method for analysis of adsorbed adjuvant molecules is needed. This report presents a method utilizing Fourier transform infrared spectroscopy with a ZnSe-attenuated total reflectance attachment to directly measure low levels (<30 µg/mL) of TLR4 agonists adsorbed on aluminum salts with minimal sample preparation.

Use of ProteinChip array surface enhanced laser desorption/ionization time-of-flight mass spectrometry (SELDI-TOF MS) to identify thymosin beta-4, a differentially secreted protein from lymphoblastoid cell lines.

The identification of proteins differentially expressed between cancer and normal cells is vital for the development of cancer diagnostics, therapeutics and vaccines. Using a ProteinChip Biomarker System (Ciphergen Biosystems, Fremont, CA) which combines ProteinChip technology with time-of-flight mass spectrometry, we have developed a simple method to screen and identify differentially secreted proteins from tumor cell lines. Mass spectra of the range of proteins secreted from normal B-cells were generated along with those secreted from Epstein-Barr virus transformed B-cells. A mass peak at m/z = 4972.1 that was highly over-represented in the transformed B-cell line was chosen for identification and purified by reversed phase chromatography with concomitant monitoring of fractions by SELDI-TOF MS. The resulting purified protein was digested with trypsin and the peptide masses derived from the SELDI-TOF spectrum were used to search the public databases for protein identification. Fragment matching of the resulting peptides identified the protein as thymosin beta-4. Using LC-electrospray ionization MS/MS, the identity of this protein was confirmed. Thymosin beta-4 is a known marker in LCLs establishing the utility of this method to discover and identify proteins differentially expressed between cancers and their matched normal counterparts.

Cryogenic transmission electron microscopy of recombinant tuberculosis vaccine antigen with anionic liposomes reveals formation of flattened liposomes.

Development of lipid-based adjuvant formulations to enhance the immunogenicity of recombinant vaccine antigens is a focus of modern vaccine research. Characterizing interactions between vaccine antigens and formulation excipients is important for establishing compatibility between the different components and optimizing vaccine stability and potency. Cryogenic transmission electron microscopy (TEM) is a highly informative analytical technique that may elucidate various aspects of protein- and lipid-based structures, including morphology, size, shape, and phase structure, while avoiding artifacts associated with staining-based TEM. In this work, cryogenic TEM is employed to characterize a recombinant tuberculosis vaccine antigen, an anionic liposome formulation, and antigen-liposome interactions. By performing three-dimensional tomographic reconstruction analysis, the formation of a population of protein-containing flattened liposomes, not present in the control samples, was detected. It is shown that cryogenic TEM provides unique information regarding antigen-liposome interactions not detectable by light-scattering-based methods. Employing a suite of complementary analytical techniques is important to fully characterize interactions between vaccine components.

In vitro evaluation of TLR4 agonist activity: formulation effects.

Effective in vitro evaluation of vaccine adjuvants would allow higher throughput screening compared to in vivo studies. However, vaccine adjuvants comprise a wide range of structures and formulations ranging from soluble TLR agonists to complex lipid-based formulations. The effects of formulation parameters on in vitro bioactivity assays and the correlations with in vivo adjuvant activity is not well understood. In the present work, we employ the Limulus amebocyte lysate assay and a human macrophage cellular cytokine production assay to demonstrate the differences in in vitro bioactivity of four distinct formulations of the synthetic TLR4 agonist GLA: an aqueous nanosuspension (GLA-AF), an oil-in-water emulsion (GLA-SE), a liposome (GLA-LS), and an alum-adsorbed formulation (GLA-Alum). Furthermore, we demonstrate the importance of the localization of GLA on in vitro potency. By comparing to previous published reports on the in vivo bioactivity of these GLA-containing formulations, we conclude that the most potent activators of the in vitro systems may not be the most potent in vivo adjuvant formulations. Furthermore, we discuss the formulation considerations which should be taken into account when interpreting data from in vitro adjuvant activity assays.

Modulating potency: Physicochemical characteristics are a determining factor of TLR4-agonist nanosuspension activity.

Activity of adjuvanted vaccines is difficult to predict in vitro and in vivo. The wide compositional and conformational range of formulated adjuvants, from aluminum salts to oil-in-water emulsions, makes comparisons between physicochemical and immunological properties difficult. Even within a formulated adjuvant class, excipient selection and concentration can alter potency and physicochemical properties of the mixture. Complete characterization of physicochemical properties of adjuvanted vaccine formulations and relationship to biological response is necessary to move beyond a guess-and-check paradigm toward directed development. Here we present a careful physicochemical characterization of a two-component nanosuspension containing synthetic TLR-4 agonist glucopyranosyl lipid adjuvant (GLA) and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) at various molar ratios. Physicochemical properties were compared with potency, as measured by stimulation of cytokine production in human whole blood. We found a surprising, nonlinear relationship between physicochemical properties and GLA-DPPC ratios that corresponded well with changes in biological activity. We discuss these data in light of the current understanding of TLR4 activation and the conformation-potency relationship in development of adjuvanted vaccines.

Elimination of the cold-chain dependence of a nanoemulsion adjuvanted vaccine against tuberculosis by lyophilization.

Next-generation rationally-designed vaccine adjuvants represent a significant breakthrough to enable development of vaccines against challenging diseases including tuberculosis, HIV, and malaria. New vaccine candidates often require maintenance of a cold-chain process to ensure long-term stability and separate vials to enable bedside mixing of antigen and adjuvant. This presents a significant financial and technological barrier to worldwide implementation of such vaccines. Herein we describe the development and characterization of a tuberculosis vaccine comprised of both antigen and adjuvant components that are stable in a single vial at sustained elevated temperatures. Further this vaccine retains the ability to elicit both antibody and TH1 responses against the vaccine antigen and protect against experimental challenge with Mycobacterium tuberculosis. These results represent a significant breakthrough in the development of vaccine candidates that can be implemented throughout the world without being hampered by the necessity of a continuous cold chain or separate adjuvant and antigen vials.

A full-length Plasmodium falciparum recombinant circumsporozoite protein expressed by Pseudomonas fluorescens platform as a malaria vaccine candidate.

The circumsporozoite protein (CSP) of Plasmodium falciparum is a major surface protein, which forms a dense coat on the sporozoite's surface. Preclinical research on CSP and clinical evaluation of a CSP fragment-based RTS, S/AS01 vaccine have demonstrated a modest degree of protection against P. falciparum, mediated in part by humoral immunity and in part by cell-mediated immunity. Given the partial protective efficacy of the RTS, S/AS01 vaccine in a recent Phase 3 trial, further improvement of CSP-based vaccines is crucial. In this report, we describe the preclinical development of a full-length, recombinant CSP (rCSP)-based vaccine candidate against P. falciparum malaria suitable for current Good Manufacturing Practice (cGMP) production. Utilizing a novel high-throughput Pseudomonas fluorescens expression platform, we demonstrated greater efficacy of full-length rCSP as compared to N-terminally truncated versions, rapidly down-selected a promising lead vaccine candidate, and developed a high-yield purification process to express immunologically active, intact antigen for clinical trial material production. The rCSP, when formulated with various adjuvants, induced antigen-specific antibody responses as measured by enzyme-linked immunosorbent assay (ELISA) and immunofluorescence assay (IFA), as well as CD4+ T-cell responses as determined by ELISpot. The adjuvanted rCSP vaccine conferred protection in mice when challenged with transgenic P. berghei sporozoites containing the P. falciparum repeat region of CSP. Furthermore, heterologous prime/boost regimens with adjuvanted rCSP and an adenovirus type 35-vectored CSP (Ad35CS) showed modest improvements in eliciting CSP-specific T-cell responses and anti-malarial protection, depending on the order of vaccine delivery. Collectively, these data support the importance of further clinical development of adjuvanted rCSP, either as a stand-alone product or as one of the components in a heterologous prime/boost strategy, ultimately acting as an effective vaccine candidate for the mitigation of P. falciparum-induced malaria.

Working together: interactions between vaccine antigens and adjuvants.

The development of vaccines containing adjuvants has the potential to enhance antibody and cellular immune responses, broaden protective immunity against heterogeneous pathogen strains, enable antigen dose sparing, and facilitate efficacy in immunocompromised populations. Nevertheless, the structural interplay between antigen and adjuvant components is often not taken into account in the published literature. Interactions between antigen and adjuvant formulations should be well characterized to enable optimum vaccine stability and efficacy. This review focuses on the importance of characterizing antigen-adjuvant interactions by summarizing findings involving widely used adjuvant formulation platforms, such as aluminum salts, emulsions, lipid vesicles, and polymer-based particles. Emphasis is placed on the physicochemical basis of antigen-adjuvant associations and the appropriate analytical tools for their characterization, as well as discussing the effects of these interactions on vaccine potency.