RESUMEN
Osteoarticular infections are challenging and difficult to treat. The use of innovative technologies like 3D printing already employed in other types of surgeries and pathologies can suppose a great asset to tackle the problem and improve functional results. We present a case of an osteoarticular infection of an ankle treated with a custom-made titanium talus made with 3D metal printing technology: A 63-year-old patient, with chronic infection of the ankle. A 2-staged surgery was performed, with a hand-made cement spacer used during the first stage and the implantation of a custom-made titanium talus with an arthrodesis nail in the second stage. After a 2-year follow-up, a good clinical evolution was achieved, with no signs of reactivation of the infection, no pain, good skin condition and optimal functionality: functional gait pattern without pain and any external aids.
Asunto(s)
Astrágalo , Titanio , Tobillo , Articulación del Tobillo/diagnóstico por imagen , Articulación del Tobillo/cirugía , Artrodesis , Humanos , Persona de Mediana Edad , Infección Persistente , Impresión Tridimensional , Astrágalo/diagnóstico por imagen , Astrágalo/cirugíaRESUMEN
Cerclage wiring may be used for fracture fixation or osteotomy stabilization in revision arthroplasty. There is a lack of evidence regarding the potential risk of bacterial colonization for the different types of cerclages. The objective of our research is to study the adhesion and biofilm formation of S. epidermidis, S. aureus, and P. aeruginosa on two different cerclage cable models, comparing a polymer cable and a stainless steel metal cable. A two-cm cerclage piece of each material was submerged in 2 mL of tryptic soy broth (TSB) inoculated with 10 µL of a 0.5 McFarland bacterial culture, and incubated at 37°C during 2 h for adhesion and 48 h for biofilm formation. The cerclages were washed with 1xPBS and sonicated in a new culture medium. Aliquots of several dilutions of each sonicated culture were spread in TSB agar and incubated at 37°C for 24 h. The number of colonies was counted. The colony-forming units per ml (CFU/mL) and the percentage of reduction were calculated. Experiments were triplicated. For P. aeruginosa, a statistically significant reduction in biofilm formation was found on the polymer cerclage cable, compared to the metal cerclage cable. Reductions of 59% and 88%, after 2 h and 48 h, respectively, were observed. For S. epidermis and S. aureus, there was a trend towards lower bacterial adhesion and biofilm formation for the polymer cerclage cable. In summary, these results demonstrate that the braided polymer cerclage cable may be less prone to bacterial adherence and biofilm formation compared to the braided metal cerclage cable.
Asunto(s)
Staphylococcus aureus , Staphylococcus epidermidis , Adhesión Bacteriana , Acero Inoxidable , Pseudomonas aeruginosa , Biopelículas , PolímerosRESUMEN
BACKGROUND: Orthopedic implant-related infection remains one of the most serious complications after orthopedic surgery. In recent years, there has been an increased scientific interest to improve prevention and treatment strategies. However, many of these strategies have focused on chemical measures. AIM: To analyze the effect of alternating current electrical fields on bacterial adherence to titanium surfaces. METHODS: Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) were exposed to 6.5 V electrical currents at different frequencies: 0.5 Hz, 0.1 Hz, and 0.05 Hz. After exposure, a bacterial count was then performed and compared to the control model. Other variables registered included the presence of electrocoagulation of the medium, electrode oxidation and/or corrosion, and changes in pH of the medium. RESULTS: The most effective electrical model for reducing S. aureus adhesion was 6.5 V alternating current at 0.05 Hz achieving a 90% adhesion reduction rate. For E. coli, the 0.05 Hz frequency model also showed the most effective results with a 53% adhesion reduction rate, although these were significantly lower than S. aureus. Notable adhesion reduction rates were observed for S. aureus and E.coli in the studied conditions. However, the presence of electrode oxidation makes us presume these conditions are not optimal for in vivo use. CONCLUSION: Although our findings suggest electrical currents may be useful in preventing bacterial adhesion to metal surfaces, further research using other electrical conditions must be examined to consider their use for in vivo trials.
RESUMEN
Background: Debridement, antibiotic agents, and implant retention (DAIR) is a currently accepted approach for the treatment of early prosthetic joint infections (PJI). The success of a DAIR procedure has shown variable results throughout the published literature. Scoring systems such as the Kidney, Liver, Index surgery, Cemented prosthesis, and C-reactive protein value (KLIC) score for the selection of patients that are likely to benefit from DAIR have proved to be helpful in decision making. Our study aims to further validate the KLIC score using a large external multicentric cohort and to evaluate other risk factors for failure. Patients and Methods: A retrospective analysis of patients with an early acute PJI who were treated with DAIR and recorded in a database of eight Spanish university hospitals was performed. According to pre-operative variables of the KLIC study, patients were categorized into five groups: group A, ≤2 points; group B, 2.5-3.5 points; group C, 4-5 points; group D, 5.5-6.5 points; and group E, ≥7 points. Failure rates were compared between groups at 60 days and after 60 days of DAIR. Further variables for risk of failure were also analyzed. Results: A total of 455 patients with early acute PJI were included in the analyses. At 60 days, patients presenting with pre-operative elevated C-reactive protein serum levels, Staphylococcus aureus, and polymicrobial infections were associated with failure. Failure rates recorded were 12% for group A (n = 210), 18% for group B (n = 83), 26% for group C (n = 89), 24% for group D (n = 66), and 0% for group E (n = 7). Univariable analysis between consecutive groups of the KLIC score showed no differences for failure before 60 days of the DAIR procedure. Scheduled surgery and having the procedure performed by a specialized unit were also identified as important factors for DAIR success. Conclusions: Our results suggest the KLIC score was not useful for predicting failure in our cohort. Furthermore, our results indicate a specialized unit should conduct DAIR procedures.
Asunto(s)
Infecciones Relacionadas con Prótesis , Antibacterianos/uso terapéutico , Desbridamiento , Humanos , Infecciones Relacionadas con Prótesis/cirugía , Estudios Retrospectivos , Factores de Riesgo , Resultado del TratamientoRESUMEN
INTRODUCTION: Chronic anterior pelvic instability means pathologic movement of the symphysis pubis with axial load. It is not a common pathology and its diagnosis is often delayed and difficult increasing the disability of affected patients. The pain is localized in the suprapubic area or groins, increasing with physical activity, direct palpation or compression. Main known causes are pregnancy, delivery, trauma, fractures, intense physical activity, infection, or previous surgeries. Treatment algorithms have not been standardized. Initially, it is managed with an orthosis, physical activity modification, medication, and rehabilitation. Surgical treatment with symphyseal arthrodesis is the last option. The literature on symphyseal plating for chronic instability found is sparse. CASE REPORT: We report the case of a 33-year-old female presenting lower abdominal pain after her third delivery. Several months after, magnetic resonance imaging and scintigraphy suggested chronic symphysitis. Single leg stance pelvic X-rays indicated chronic anterior pelvic instability. Pain-relievers, physical rehabilitation, and local corticosteroid injection were noneffective; surgery was indicated, performing a double plate symphyseal arthrodesis with iliac bone graft. CONCLUSION: Pelvic instability should be ruled out when persistent abdominal or lower back pain are present. Thorough physical examination and specific provocative maneuvers need to be assessed. In our presented case, symphyseal arthrodesis was performed without complications. After a two-year follow-up, the patient has recovered her previous functional status and bone scintigraphy is negative. Radiologic controls rule out loosening or material breaking as a complication. We hope this case report may give a clue in surgical options management.
RESUMEN
PURPOSE: The aim of this study is to evaluate the functional results of open reduction using the Newcastle approach and internal fixation for complex intra-articular distal humeral fractures in children through the report of cases. MATERIAL AND METHODS: A retrospective case series of patients who underwent open reduction and internal fixation surgery because of a complex intra-articular distal humeral fracture using the Newcastle approach were reviewed. Minimum follow-up was 2 years. Demographic, clinical, and radiological data were analyzed. Also, Mayo Elbow Performance Score and four-point Likert scale were evaluated. RESULTS: 2 children were included in the final analysis. In both fractures, the approach was sufficient for accurate reduction and the functional outcome on both elbows was satisfactory. The Mayo elbow score was 95 points (excellent results) and the five-point Likert scale, both patients were very satisfied with the outcomes. In the radiographic study, no necrosis or secondary deformities were observed. CONCLUSIONS: Our study provides evidence that the Newcastle approach is an alternative to perform open reduction in those children supra-intercondylar fractures that cannot be reduced using a close reduction. To our knowledge, there is not previous paper that has reported the used of this approach in the treatment in this kind of fractures.
RESUMEN
Objectives: Obesity is a documented comorbidity that is prevalent in the elderly population and a known predictor for surgical site infection (SSI). Body mass index is a convenient method to classify obesity, but it fails to account for fat distribution. The objective of our study was to evaluate the association between surgical site infection and a subcutaneous radiographic measurement (SRM) in elderly hip fracture patients. Materials and Methods: A retrospective case-control study was conducted to compare SRMs at the hip in patients diagnosed with surgical site infection after hip fracture surgery with patients that were not diagnosed with surgical site infection. Each case was matched to two controls. An SRM was defined as the distance from the tip of the greater trochanter to the skin following a perpendicular line to the femoral diaphysis in anteroposterior hip radiographs. Clinical diagnosis of acute surgical site infection was based on Tsukayama criteria. Results: Patients with an SRM greater than 6.27cm had a 7-fold increase in the odds of surgical site infection (OR=7.42, 95% Confidence Interval (CI)=3.01-18.28, p<0.001) compared to those with smaller measurements. The odds ratio (OR) for infection of patients with an ASA score of 3 was 15.82(95% CI=5.11-48.9, p-value<0.001) A statistically significant difference between cases and controls was also found when SRM at the hip was analyzed as a continuous variable. Patients with an infection had a 2.24cm (95% CI=1.59 - 2.90; p<0.001) greater mean SRM. Conclusion: Results of our study suggest an association between the SRM at the hip and the risk of SSI in elderly patients with surgically treated hip fractures. SRM may be a helpful tool for evaluating the risk of SSI in elderly hip fracture patients.