Carbon Nanotubes as a Solid-State Electron Mediator for Visible-Light-Driven Z-Scheme Overall Water Splitting.

So-called Z-scheme systems, which typically comprise an H2 evolution photocatalyst (HEP), an O2 evolution photocatalyst (OEP), and an electron mediator, represent a promising approach to solar hydrogen production via photocatalytic overall water splitting (OWS). The electron mediator transferring photogenerated charges between the HEP and OEP governs the performance of such systems. However, existing electron mediators suffer from low stability, corrosiveness to the photocatalysts, and parasitic light absorption. In the present work, carbon nanotubes (CNTs) were shown to function as an effective solid-state electron mediator in a Z-scheme OWS system. Based on the high stability and good charge transfer characteristics of CNTs, this system exhibited superior OWS performance compared with other systems using more common electron mediators. The as-constructed system evolved stoichiometric amounts of H2 and O2 at near-ambient pressure with a solar-to-hydrogen energy conversion efficiency of 0.15%. The OWS reaction was also promoted in the case that this CNT-based Z-scheme system was immobilized on a substrate. Hence, CNTs are a viable electron mediator material for large-scale Z-scheme OWS systems.

Overall Water Splitting by a SrTaO2N-Based Photocatalyst Decorated with an Ir-Promoted Ru-Based Cocatalyst.

The development of narrow-bandgap photocatalysts for one-step-excitation overall water splitting (OWS) remains a critical challenge in the field of solar hydrogen production. SrTaO2N is a photocatalytic material having a band structure suitable for OWS under visible light (λ ≤ 600 nm). However, the presence of defects in the oxynitride and the lack of cocatalysts to promote simultaneous hydrogen and oxygen evolution make it challenging to realize OWS using this material. The present work demonstrates a SrTaO2N-based particulate photocatalyst for OWS. This photocatalyst, which was composed of single crystals, was obtained by nitriding SrCl2 and Ta2O5 together with NaOH, with the latter added to control the formation of defects. The subsequent loading of bimetallic RuIrOx nanoparticles accelerated charge separation and allowed the SrTaO2N photocatalyst to exhibit superior OWS activity. This research presenting the strategies of controlling the oxygen sources and promoting the cocatalyst function is expected to expand the range of potential OWS-active oxynitride photocatalysts and permit the design of efficient cocatalysts for photocatalytic OWS.

Enhanced Overall Water Splitting by a Zirconium-Doped TaON-Based Photocatalyst.

Solar-powered one-step-excitation overall water splitting (OWS) using semiconducting materials is a simple means of achieving scalable and sustainable hydrogen production. While tantalum oxynitride (TaON) is one of the few photocatalysts capable of promoting OWS via single-step visible-light excitation, the efficiency of this process remains extremely poor. The present work employed 15 nm amorphous Ta2 O5 ⋅3.3 H2 O nanoparticles as a new precursor together with Zr doping and an optimized nitridation duration to synthesize a TaON-based photocatalyst with reduced particle sizes and low defect densities. Upon loading with Ru/Cr2 O3 /IrO2 cocatalysts, this material exhibited stoichiometric water splitting into hydrogen and oxygen, with an order of magnitude improvement in efficiency. Our findings demonstrate the importance of inventing/selecting the appropriate synthetic precursor and of defect control for fabricating active OWS photocatalysts.

Surface Modifications of (ZnSe)0.5(CuGa2.5Se4.25)0.5 to Promote Photocatalytic Z-Scheme Overall Water Splitting.

Charge separation is crucial for an efficient artificial photosynthetic process, especially for narrow-bandgap metal sulfides/selenides. The present study demonstrates the application of a p-n junction to particulate metal selenides to enhance photocatalytic Z-scheme overall water splitting (OWS). The constructed p-n junction of CdS-(ZnSe)0.5(CuGa2.5Se4.25)0.5 significantly boosted charge separation. A thin TiO2 coating layer also was introduced to inhibit photocorrosion of CdS and suppress the backward reaction of water formation from hydrogen and oxygen. By employing Pt-loaded TiO2/CdS-(ZnSe)0.5(CuGa2.5Se4.25)0.5 as a hydrogen evolution photocatalyst (HEP), we assembled a Z-scheme OWS system, together with BiVO4:Mo and Au as an oxygen evolution photocatalyst and electron mediator, respectively. An apparent quantum yield of 1.5% at 420 nm was achieved, which is by far the highest among reported particulate photocatalytic Z-scheme OWS systems with metal sulfides/selenides as HEPs. The present work demonstrates that a well-tailored p-n junction structure is effective for promoting charge separation in photocatalysis and opens new pathways for the development of efficient artificial photosynthesis systems involving narrow bandgap photocatalysts.

Simultaneously Tuning the Defects and Surface Properties of Ta3N5 Nanoparticles by Mg-Zr Codoping for Significantly Accelerated Photocatalytic H2 Evolution.

The simultaneous control of the defect species and surface properties of semiconducting materials is a crucial aspect of improving photocatalytic performance, yet it remains challenging. Here, we synthesized Mg-Zr-codoped single-crystalline Ta3N5 (Ta3N5:Mg+Zr) nanoparticles by a brief NH3 nitridation process, exhibiting photocatalytic water reduction activity 45 times greater than that of pristine Ta3N5 under visible light. A coherent picture of the relations between the defect species (comprising reduced Ta, nitrogen vacancies and oxygen impurities), surface properties (associated with dispersion of the Pt cocatalyst), charge carrier dynamics, and photocatalytic activities was drawn. The tuning of defects and simultaneous optimization of surface properties resulting from the codoping evidently resulted in the generation of high concentrations of long-lived electrons in this material as well as the efficient migration of these electrons to evenly distributed surface Pt sites. These effects greatly enhanced the photocatalytic activity. This work highlights the importance and feasibility of improving multiple properties of a catalytic material via a one-step strategy.

How g-C3N4 Works and Is Different from TiO2 as an Environmental Photocatalyst: Mechanistic View.

Graphitic carbon nitride (CN) as a popular visible light photocatalyst needs to be better understood for environmental applications. The behaviors of CN as an environmental photocatalyst were systematically studied in comparison with a well-known TiO2 photocatalyst. The two photocatalysts exhibit different photocatalytic oxidation (PCO) behaviors and dependences on the experimental conditions (e.g., pH, Pt loading, and the kind of organic substrate and scavenger). The PCO of organic substrates was significantly enhanced by loading Pt on TiO2 under UV light (λ > 320 nm), whereas Pt-CN exhibited a lower PCO activity than bare CN under visible light (λ > 420 nm). While the presence of Pt enhances the charge separation in both TiO2/UV and CN/visible light systems (confirmed by transient IR absorption spectroscopic analysis), the opposite effects of Pt are ascribed to the different mechanisms of •OH generation in the two photocatalytic systems. The negative effect of Pt on CN is ascribed to the fact that Pt catalytically decomposes in situ-generated H2O2 (a main precursor of OH radical), which hinders •OH production. The production of OH radicals on CN is favored only at acidic pH but 1O2 generation is dominant in alkaline pH. The pH-dependent behaviors of reactive oxygen species generation on CN were confirmed by electron paramagnetic resonance spin trap measurements.

Heteroatom Dopants Promote Two-Electron O2 Reduction for Photocatalytic Production of H2 O2 on Polymeric Carbon Nitride.

Polymeric carbon nitride modified with selected heteroatom dopants was prepared and used as a model photocatalyst to identify and understand the key mechanisms required for efficient photoproduction of H2 O2 via selective oxygen reduction reaction (ORR). The photochemical production of H2 O2 was achieved at a millimolar level per hour under visible-light irradiation along with 100 % apparent quantum yield (in 360-450 nm region) and 96 % selectivity in an electrochemical system (0.1 V vs. RHE). Spectroscopic analysis in spatiotemporal resolution and theoretical calculations revealed that the synergistic association of alkali and sulfur dopants in the polymeric matrix promoted the interlayer charge separation and polarization of trapped electrons for preferable oxygen capture and reduction in ORR kinetics. This work highlights the key features that are responsible for controlling the photocatalytic activity and selectivity toward the two-electron ORR, which should be the basis of further development of solar H2 O2 production.

Oxygen induced enhancement of NIR emission in brookite TiO2 powders: comparison with rutile and anatase TiO2 powders.

Brookite TiO2 attracts considerable attention in photocatalysis owing to its superior performance in several photocatalytic reactions. In this work, we investigated the behavior of charge carriers in brookite, rutile, and anatase TiO2 by using photoluminescence (PL) and transient absorption (TA) spectroscopies. PL measurements revealed that brookite TiO2 exhibits a visible and a NIR emission at ∼520 nm and ∼860 nm, respectively. Addition of methanol vapor quenched both the visible and NIR emissions by the hole-consuming reaction of methanol. However, exposure to O2 shows curious behaviors: the visible emission was quenched but the NIR emission was enhanced. These results can be accounted for by the enhancement of upward band bending resulting in the effective separation of electrons and holes into the bulk and the surface, respectively. Furthermore, the shallowly trapped electrons, which are responsible for visible PL, are consumed by O2; hence, the visible emission is quenched. However, in the case of NIR emission, the deeply trapped electrons are responsible and they are mainly located at the surface defects. The O2 adsorption promotes the hole accumulation at the surface and then assists the recombination of these deeply trapped electrons, resulting in the enhancement of the NIR emission. We also found that the lifetime of NIR emission (τ1 = 43 ± 0 ns and τ2 = 589 ± 1 ns) was much longer than that of visible emission (τ1 = 15 ± 0 ns and τ2 = 23 ± 0 ns), since the mobility of these deeply trapped electrons to encounter with holes is lower than that of the shallowly trapped electrons. However, even for this slow NIR emission, the actual lifetime of the deeply trapped electrons estimated by TA (1.5 ± 0.0 µs and 17 ± 0 µs) was one or two orders of magnitude longer, confirming that non-radiative recombination is dominant and it is much slower than radiative recombination: TAS and PL provide detailed information on the radiative and non-radiative recombination processes. The PL of anatase and rutile TiO2 powders was also measured and the difference from brookite TiO2 was discussed.

Undoped Layered Perovskite Oxynitride Li2 LaTa2 O6 N for Photocatalytic CO2 Reduction with Visible Light.

Oxynitrides are promising visible-light-responsive photocatalysts, but their structures are almost confined with three-dimensional (3D) structures such as perovskites. A phase-pure Li2 LaTa2 O6 N with a layered perovskite structure was successfully prepared by thermal ammonolysis of a lithium-rich oxide precursor. Li2 LaTa2 O6 N exhibited high crystallinity and visible-light absorption up to 500 nm. As opposed to well-known 3D oxynitride perovskites, Li2 LaTa2 O6 N supported by a binuclear RuII complex was capable of stably and selectively converting CO2 into formate under visible light (λ>400 nm). Transient absorption spectroscopy indicated that, as compared to 3D oxynitrides, Li2 LaTa2 O6 N possesses a lower density of mid-gap states that work as recombination centers of photogenerated electron/hole pairs, but a higher density of reactive electrons, which is responsible for the higher photocatalytic performance of this layered oxynitride.

Elucidating the impact of A-site cation change on photocatalytic H2 and O2 evolution activities of perovskite-type LnTaON2 (Ln = La and Pr).

Transition metal (oxy)nitrides with perovskite-type structures have been regarded as one of the promising classes of inorganic semiconductor materials that can be used in solar water splitting systems for the production of hydrogen as a renewable and storable energy carrier. The performance of transition metal (oxy)nitrides in solar water splitting is strongly influenced by the crystal structure-related dynamics of photogenerated charge carriers. Here, we have systematically assessed the influence of A-site cation exchange on the visible-light-induced photocatalytic H2 and O2 evolution activities, photoanodic response, and dynamics of photogenerated charge carriers of perovskite-type LnTaON2 (Ln = La and Pr). The structural refinement results reveal the orthorhombic Imma and Pnma structures for LaTaON2 and PrTaON2, respectively; the latter has a more distorted crystal structure from the ideal cubic perovskite due to the smaller size of Pr3+ cations. Compared with LaTaON2, PrTaON2 exhibits lower photocatalytic H2 and O2 gas evolution activities and photoanodic response owing to an excessive amount of intrinsic defects associated with anionic vacancies and reduced tantalum species stemming from a long high-temperature nitridation process under reductive NH3 atmosphere. Transient absorption signals evidence the faster decay of photogenerated electrons (holes) in Pt (CoOx)-loaded LaTaON2 than that in Pt (CoOx)-loaded PrTaON2, consistent with the photocatalytic and photoelectrochemical performance of the two photocatalysts. This study suggests that in addition to selecting a suitable A-site cation, it is prerequisite to synthesize LnTaON2 (Ln = La and Pr) crystals with a low defect density to improve their photo-conversion efficiency for solar water splitting.

Efficient and stable visible-light-driven Z-scheme overall water splitting using an oxysulfide H2 evolution photocatalyst.

So-called Z-scheme systems permit overall water splitting using narrow-bandgap photocatalysts. To boost the performance of such systems, it is necessary to enhance the intrinsic activities of the hydrogen evolution photocatalyst and oxygen evolution photocatalyst, promote electron transfer from the oxygen evolution photocatalyst to the hydrogen evolution photocatalyst, and suppress back reactions. The present work develop a high-performance oxysulfide photocatalyst, Sm2Ti2O5S2, as an hydrogen evolution photocatalyst for use in a Z-scheme overall water splitting system in combination with BiVO4 as the oxygen evolution photocatalyst and reduced graphene oxide as the solid-state electron mediator. After surface modifications of the photocatalysts to promote charge separation and redox reactions, this system is able to split water into hydrogen and oxygen for more than 100 hours with a solar-to-hydrogen energy conversion efficiency of 0.22%. In contrast to many existing photocatalytic systems, the water splitting activity of the present system is only minimally reduced by increasing the background pressure to 90 kPa. These results suggest characteristics suitable for applications under practical operating conditions.

Co-doping of a La5Ti2Cu0.9Ag0.1O7S5 photocatalyst (λ < 700 nm) with Ga and Al to enhance photocatalytic H2 evolution.

La5Ti2Cu0.9Ag0.1O7S5 (LTCA) (λ < 700 nm) can function as a photocatalyst for H2 evolution. Co-doping LTCA with Ga3+ and Al3+ at Ti4+ sites effectively enhanced the H2 evolution activity of LTCA, yielding an apparent quantum efficiency of 18% at 420 nm. The activity of this material was greater than that previously reported for Ga-doped LTCA by a factor of 1.6. Such activity enhancement is attributed to increasing the population of long-lived photogenerated electrons and facilitating the electron transfer to the cocatalyst. This work significantly improved the LTCA-based photocatalyst for H2 evolution, making it a promising material for future application in non-sacrificial Z-scheme water splitting.

Sub-50 nm perovskite-type tantalum-based oxynitride single crystals with enhanced photoactivity for water splitting.

A long-standing trade-off exists between improving crystallinity and minimizing particle size in the synthesis of perovskite-type transition-metal oxynitride photocatalysts via the thermal nitridation of commonly used metal oxide and carbonate precursors. Here, we overcome this limitation to fabricate ATaO2N (A = Sr, Ca, Ba) single nanocrystals with particle sizes of several tens of nanometers, excellent crystallinity and tunable long-wavelength response via thermal nitridation of mixtures of tantalum disulfide, metal hydroxides (A(OH)2), and molten-salt fluxes (e.g., SrCl2) as precursors. The SrTaO2N nanocrystals modified with a tailored Ir-Pt alloy@Cr2O3 cocatalyst evolved H2 around two orders of magnitude more efficiently than the previously reported SrTaO2N photocatalysts, with a record solar-to-hydrogen energy conversion efficiency of 0.15% for SrTaO2N in Z-scheme water splitting. Our findings enable the synthesis of perovskite-type transition-metal oxynitride nanocrystals by thermal nitridation and pave the way for manufacturing advanced long-wavelength-responsive particulate photocatalysts for efficient solar energy conversion.

Overall photosynthesis of H2O2 by an inorganic semiconductor.

Artificial photosynthesis of H2O2 using earth-abundant water and oxygen is a promising approach to achieve scalable and cost-effective solar fuel production. Recent studies on this topic have made significant progress, yet are mainly focused on using  organic polymers. This set of photocatalysts is susceptible to potent oxidants (e.g. hydroxyl radical) that are inevitably formed during H2O2 generation. Here, we report an inorganic Mo-doped faceted BiVO4 (Mo:BiVO4) system that is resistant to radical oxidation and exhibits a high overall H2O2 photosynthesis efficiency among inorganic photocatalysts, with an apparent quantum yield of 1.2% and a solar-to-chemical conversion efficiency of 0.29% at full spectrum, as well as an apparent quantum yield of 5.8% at 420 nm. The surface-reaction kinetics and selectivity of Mo:BiVO4 were tuned by precisely loading CoOx and Pd on {110} and {010} facets, respectively. Time-resolved spectroscopic investigations of photocarriers suggest that depositing select cocatalysts on distinct facet tailored the interfacial energetics between {110} and {010} facets and enhanced charge separation in Mo:BiVO4, therefore overcoming a key challenge in developing efficient inorganic photocatalysts. The promising H2O2 generation efficiency achieved by delicate design of catalyst spatial and electronic structures sheds light on applying robust inorganic particulate photocatalysts to artificial photosynthesis of H2O2.

A general interfacial-energetics-tuning strategy for enhanced artificial photosynthesis.

The demands for cost-effective solar fuels have triggered extensive research in artificial photosynthesis, yet the efforts in designing high-performance particulate photocatalysts are largely impeded by inefficient charge separation. Because charge separation in a particulate photocatalyst is driven by asymmetric interfacial energetics between its reduction and oxidation sites, enhancing this process demands nanoscale tuning of interfacial energetics on the prerequisite of not impairing the kinetics and selectivity for surface reactions. In this study, we realize this target with a general strategy involving the application of a core/shell type cocatalyst that is demonstrated on various photocatalytic systems. The promising H2O2 generation efficiency validate our perspective on tuning interfacial energetics for enhanced charge separation and photosynthesis performance. Particularly, this strategy is highlighted on a BiVO4 system for overall H2O2 photosynthesis with a solar-to-H2O2 conversion of 0.73%.

Sequential cocatalyst decoration on BaTaO2N towards highly-active Z-scheme water splitting.

Oxynitride photocatalysts hold promise for renewable solar hydrogen production via water splitting owing to their intense visible light absorption. Cocatalyst loading is essential for activation of such oxynitride photocatalysts. However, cocatalyst nanoparticles form aggregates and exhibit weak interaction with photocatalysts, which prevents eliciting their intrinsic photocatalytic performance. Here, we demonstrate efficient utilization of photoexcited electrons in a single-crystalline particulate BaTaO2N photocatalyst prepared with the assistance of RbCl flux for H2 evolution reactions via sequential decoration of Pt cocatalyst by impregnation-reduction followed by site-selective photodeposition. The Pt-loaded BaTaO2N photocatalyst evolves H2 over 100 times more efficiently than before, with an apparent quantum yield of 6.8% at the wavelength of 420 nm, from a methanol aqueous solution, and a solar-to-hydrogen energy conversion efficiency of 0.24% in Z-scheme water splitting. Enabling uniform dispersion and intimate contact of cocatalyst nanoparticles on single-crystalline narrow-bandgap particulate photocatalysts is a key to efficient solar-to-chemical energy conversion.

Efficient photocatalytic hydrogen evolution on single-crystalline metal selenide particles with suitable cocatalysts.

It is important to improve the apparent quantum yields (AQYs) of narrow bandgap photocatalysts to achieve efficient H2 production. The present work demonstrates a particulate solid solution of zinc selenide and copper gallium selenide (denoted as ZnSe:CGSe) that evolves H2 efficiently and is responsive to visible light up to 725 nm. This material was synthesized using a flux-assisted method and was found to comprise single-crystalline tetrahedral particles. The coloading of Ni and Rh, Pt, Pd or Ru as cocatalysts further improved the photocatalytic H2 evolution rate over this photocatalyst. With the optimal coloading of a Ni-Ru composite cocatalyst, an AQY of 13.7% was obtained at 420 nm during a sacrificial H2 evolution reaction, representing the highest value yet reported for a photocatalyst with an absorption edge longer than 700 nm. The present study demonstrates that the preparation of single-crystalline particles and the rational assembly of composite cocatalysts are effective strategies that allow the efficient utilization of long wavelengths by metal selenide photocatalysts for solar fuel production.

Fe/Ru Oxide as a Versatile and Effective Cocatalyst for Boosting Z-Scheme Water-Splitting: Suppressing Undesirable Backward Electron Transfer.

The atificial Z-scheme is a promising and rational strategy for solar-to-chemical energy conversion such as water-splitting. In the Z-scheme, backward redox processes are an essential drawback that should be overcome to increase its efficiency. Here, we demonstrate that the simple co-loading of Fe/Ru oxide, (Fe,Ru)Ox, onto various photocatalysts effectively improves the efficiency of water oxidation by suppressing the undesirable backward oxidation of the redox reagent Fe2+. The (Fe,Ru)Ox co-loading on Bi4TaO8Cl afforded the highest water-splitting activity (apparent quantum efficiency of 1.6% at 420 nm) among the Z-scheme systems employing mixed-anion compounds as O2-evolving photocatalysts. The results of photoelectrochemical and electrochemical measurements along with time-resolved spectroscopy clarified the key roles of Fe/Ru oxide; the Ru oxide component functions as a "collector" of photogenerated carriers and active sites for surface redox reactions, while the Fe oxide component acts as a "blocker" against unfavorable Fe2+ oxidation. The versatile availability of Fe/Ru oxide has been demonstrated for other visible-light-responsive photocatalysts.

Author Correction: Clear and transparent nanocrystals for infrared-responsive carrier transfer.

The original version of this Article omitted the fourth author Taizo Yoshinaga, who is from the 'Graduate School of Pure and Applied Sciences, University of Tsukuba, 1-1-1 Tennodai, Tsukuba, Japan'. Consequently, the third sentence of the Author Contributions, 'M.S. and M.K. synthesized the ITO NCs and ITO/semiconductor oxides' was revised to 'M.S., M.K. and T.Y. synthesized the ITO NCs and ITO/semiconductor oxides'. This has been corrected in both the PDF and HTML versions of the Article.

Clear and transparent nanocrystals for infrared-responsive carrier transfer.

Infrared-light-induced carrier transfer is a key technology for 'invisible' optical devices for information communication systems and energy devices. However, clear and colourless photo-induced carrier transfer has not yet been demonstrated in the field of photochemistry, to the best of our knowledge. Here, we resolve this problem by employing short-wavelength-infrared (1400-4000 nm) localized surface plasmon resonance-induced electron injection from indium tin oxide nanocrystals to transparent metal oxides. The time-resolved infrared measurements visualize the dynamics of the carrier in this invisible system. Selective excitation of localized surface plasmon resonances causes hot electron injection with high efficiency (33%) and long-lived charge separation (~ 2-200 µs). We anticipate our study not only provides a breakthrough for plasmonic carrier transfer systems but may also stimulate the invention of state-of-the-art invisible optical devices.