Treatability studies of naphthalene in soil, water and air with persulfate activated by iron(II).

Chemical oxidation was applied to an artificially contaminated soil with naphthalene (NAP). Evaluation of NAP distribution and mass reduction in soil, water and air phases was carried out through mass balance. Evaluation of NAP distribution and mass reduction in soil, water and air phases was carried out through mass balance. The importance of the air phase analysis was emphasized by demonstrating how NAP behaves in a sealed system over a 4 hr reaction period. Design of Experiments method was applied to the following variables: sodium persulfate concentration [SP], ferrous sulfate concentration [FeSO4], and pH. The system operated with a prefixed solid to liquid ratio of 1:2. The following conditions resulted in optimum NAP removal [SP] = 18.37 g/L, [FeSO4] = 4.25 g/L and pH = 3.00. At the end of the 4 hr reaction, 62% of NAP was degraded. In the soil phase, the chemical oxidation reduced the NAP concentration thus achieving levels which comply with Brazilian and USA environmental legislations. Besides the NAP partitioning view, the monitoring of each phase allowed the variabilities assessment over the process, refining the knowledge of mass reduction. Based on NAP distribution in the system, this study demonstrates the importance of evaluating the presence of semi-volatile and volatile organic compounds in the air phase during remediation, so that there is greater control of the system as to the distribution and presence of the contaminant in the environment. The results highlight the importance of treating the contaminant in all its phases at the contaminated site.

A comparative study of persulfate activation by iron-modified diatomite and traditional processes for the treatment of 17α-ethinylestradiol in water.

Emerging pollutants have been the subject of worldwide study because their continuous entry into the environment presents a risk to ecosystems and human health. Advanced oxidation processes show promise for eliminating or reducing the concentrations of emerging pollutants in water. This study aimed to investigate the treatment of aqueous systems containing the synthetic hormone 17α-ethinylestradiol. An innovative method for persulfate activation catalysed by iron-modified diatomite (heterogeneous system) was compared to conventional homogeneous activation methods (iron activation, alkaline activation, and heat activation). Iron-modified diatomite was more efficient in activating persulfate than traditional processes, achieving 98% of pollutant removal. Experimental results indicated that the catalyst can be reused without loss of removal efficiency, with potential environmental and economic benefits.