RESUMEN
The synthesis and characterization of a novel film-forming organic cage and of its smaller analogue are here described. While the small cage produced single crystals suitable for X-ray diffraction studies, the large one was isolated as a dense film. Due to its remarkable film-forming properties, this latter cage could be solution processed into transparent thin-layer films and mechanically stable dense self-standing membranes of controllable thickness. Thanks to these peculiar features, the membranes were also successfully tested for gas permeation, reporting a behavior similar to that found with stiff glassy polymers such as polymers of intrinsic microporosity or polyimides. Given the growing interest in the development of molecular-based membranes, for example for separation technologies and functional coatings, the properties of this organic cage were investigated by thorough analysis of their structural, thermal, mechanical and gas transport properties, and by detailed atomistic simulations.
RESUMEN
Peripheral nerve injury is one of the most debilitating pathologies that severely impair patients' life. Although many efforts have been made to advance in the treatment of such a complex disorder, successful strategies to ensure full recovery are still scarce. The aim of the present work was to develop flexible and mechanically resistant platforms intended to act as a support and guide for neural cells during the regeneration process of peripheral nerve injury. For this purpose, poly(lactic-co-glycolic acid) (PLGA)/poly(d,l-lactic acid) (PDLLA)/poly(ethylene glycol) 400 (PEG)-multichannel-based scaffolds (MCs) were prepared through a multistep process involving electrospun microfibers coated with a polymer blend solution and used as a sacrificial mold. In particular, scaffolds characterized by random (MCR) and aligned (MCA) multichannel were obtained. A design of experiments approach (DoE) was employed to identify a scaffold-optimized composition. MCs were characterized for morphological and mechanical properties, suturability, degradability, cell colonization, and in vivo safety. A new biodegradable, biocompatible, and safe microscale multichannel scaffold was developed as the result of an easy multistep procedure.
Asunto(s)
Traumatismos de los Nervios Periféricos , Ácido Poliglicólico , Humanos , Copolímero de Ácido Poliláctico-Ácido Poliglicólico , Ácido Láctico , Andamios del TejidoRESUMEN
Tendon disorders are common medical conditions that could lead to significant disability, pain, healthcare costs, and a loss of productivity. Traditional approaches require long periods of treatment, and they largely fail due to the tissues weakening and the postoperative alterations of the normal joint mechanics. To overcome these limitations, innovative strategies for the treatment of these injuries need to be explored. The aim of the present work was the design of nano-fibrous scaffolds based on poly(butyl cyanoacrylate) (PBCA), a well-known biodegradable and biocompatible synthetic polymer, doped with copper oxide nanoparticles and caseinphosphopeptides (CPP), able to mimic the hierarchical structure of the tendon and to improve the tissue healing potential. These were developed as implants to be sutured to reconstruct the tendons and the ligaments during surgery. PBCA was synthetized, and then electrospun to produce aligned nanofibers. The obtained scaffolds were characterized for their structure and physico-chemical and mechanical properties, highlighting that CuO and CPP loading, and the aligned conformation determined an increase in the scaffold mechanical performance. Furthermore, the scaffolds loaded with CuO showed antioxidant and anti-inflammatory properties. Moreover, human tenocytes adhesion and proliferation to the scaffolds were assessed in vitro. Finally, the antibacterial activity of the scaffolds was evaluated using Escherichia coli and Staphylococcus aureus as representative of Gram-negative and Gram-positive bacteria, respectively, demonstrating that the CuO-doped scaffolds possessed a significant antimicrobial effect against E. coli. In conclusion, scaffolds based on PBCA and doped with CuO and CPP deserve particular attention as enhancers of the tendon tissue regeneration and able to avoid bacterial adhesion. Further investigation on the scaffold efficacy in vivo will assess their capability for enhancing the tendon ECM restoration in view of accelerating their translation to the clinic.
Asunto(s)
Enbucrilato , Nanofibras , Humanos , Ingeniería de Tejidos , Andamios del Tejido/química , Escherichia coli , Tendones , Nanofibras/química , Poliésteres/químicaRESUMEN
In this paper, we report on the preparation of Imidazole-functionalized glass surfaces, demonstrating the ability of a dinuclear Cu(II) complex of a macrocyclic ligand to give a "cascade" interaction with the deprotonated forms of grafted imidazole moieties. In this way, we realized a prototypal example of an antimicrobial surface based on a supramolecular approach, obtaining a neat microbicidal effect using low amounts of the described copper complex.
Asunto(s)
Antibacterianos , Cobre , Antibacterianos/farmacología , Vidrio , Imidazoles/farmacología , LigandosRESUMEN
Water-in-salt solutions, i.e. solutions in which the amount of salt by volume or weight is larger than that of the solvent, are attracting increasing attention in electrochemistry due to their distinct features that often include decomposition potentials much higher than those of lower concentration solutions. Despite the high solubility of potassium acetate (KAC) in water at room temperature (up to 25 moles of salt per kg of solvent), the low cost, and the large availability, the use of highly concentrated KAC solutions is still limited to a few examples in energy storage applications and a systematic study of their physical-chemical properties is lacking. To fill this gap, we have investigated the thermal, rheological, electrical, electrochemical, and spectroscopic features of KAC/water solutions in the compositional range between 1 and 25 mol kg-1. We show the presence of a transition between the "salt-in-solvent" and "solvent-in-salt" regimes in the range of 10-15 mol kg-1. Among the explored compositions, the highest concentrations (20 and 25 mol kg-1) exhibit good room temperature conductivity values (55.6 and 31 mS cm-1, respectively) and a large electrochemical potential window (above 2.5 V).
RESUMEN
Oral mucositis and esophagitis represent the most frequent and clinically significant complications of cytoreductive chemotherapy and radiotherapy, which severely compromise the patient quality of life. The local application of polymeric gels could protect the injured tissues, alleviating the most painful symptoms. The present work aims at developing in situ gelling formulations for the treatment of oral mucositis and esophagitis. To reach these targets, κ-carrageenan (κ-CG) was selected as a polymer having wound healing properties and able to gelify in the presence of saliva ions, while hydroxypropyl cellulose (HPC) was used to improve the mucoadhesive properties of the formulations. CaCl2 was identified as a salt able to enhance the interaction between κ-CG and saliva ions. Different salt and polymer concentrations were investigated in order to obtain a formulation having the following features: (i) low viscosity at room temperature to facilitate administration, (ii) marked elastic properties at 37 °C, functional to a protective action towards damaged tissues, and (iii) mucoadhesive properties. Prototypes characterized by different κ-CG, HPC, and CaCl2 concentrations were subjected to a thorough rheological characterization and to in vitro mucoadhesion and washability tests. The overall results pointed out the ability of the developed formulations to produce a gel able to interact with saliva ions and to adhere to the biological substrates.
Asunto(s)
Carragenina/química , Esófago/efectos de los fármacos , Mucosa Bucal/efectos de los fármacos , Adhesivos Tisulares/química , Adhesivos Tisulares/farmacología , Cloruro de Calcio/química , Celulosa/análogos & derivados , Composición de Medicamentos , Elasticidad , Geles , Humanos , Técnicas In Vitro , Solubilidad , Viscosidad , Cicatrización de Heridas/efectos de los fármacosRESUMEN
The present work proposed a novel therapeutic platform with both neuroprotective and neuroregenerative potential to be used in the treatment of spinal cord injury (SCI). A dual-functioning scaffold for the delivery of the neuroprotective S1R agonist, RC-33, to be locally implanted at the site of SCI, was developed. RC-33-loaded fibers, containing alginate (ALG) and a mixture of two different grades of poly(ethylene oxide) (PEO), were prepared by electrospinning. After ionotropic cross-linking, fibers were incorporated in chitosan (CS) films to obtain a drug delivery system more flexible, easier to handle, and characterized by a controlled degradation rate. Dialysis equilibrium studies demonstrated that ALG was able to form an interaction product with the cationic RC-33 and to control RC-33 release in the physiological medium. Fibers loaded with RC-33 at the concentration corresponding to 10% of ALG maximum binding capacity were incorporated in films based on CS at two different molecular weights-low (CSL) and medium (CSM)-solubilized in acetic (AA) or glutamic (GA) acid. CSL- based scaffolds were subjected to a degradation test in order to investigate if the different CSL salification could affect the film behavior when in contact with media that mimic SCI environment. CSL AA exhibited a slower biodegradation and a good compatibility towards human neuroblastoma cell line.
Asunto(s)
Compuestos de Bifenilo/administración & dosificación , Nanofibras , Piperidinas/administración & dosificación , Receptores sigma/agonistas , Traumatismos de la Médula Espinal/tratamiento farmacológico , Alginatos/química , Compuestos de Bifenilo/farmacología , Línea Celular Tumoral , Quitosano/química , Portadores de Fármacos/química , Sistemas de Liberación de Medicamentos , Humanos , Peso Molecular , Neuroblastoma/metabolismo , Fármacos Neuroprotectores/administración & dosificación , Fármacos Neuroprotectores/farmacología , Piperidinas/farmacología , Polietilenglicoles/química , Receptor Sigma-1RESUMEN
The aim of the present work was to load a Hibiscus sabdariffa (HS) hydroalcoholic extract into in situ gelling formulations for the treatment of oral mucositis and esophagitis. Such formulations, selected as the most promising options in a previous work of ours, were composed by κ-carrageenan (κ-CG), a sulfated marine polymer able to gelify in presence of saliva ions, hydroxypropyl cellulose (HPC), used as mucoadhesive agent, and CaCl2, salt able to enhance the interaction κ-CG/saliva ions. HS extract, which is rich in phytochemicals such as polyphenols, polysaccharides and organic acids, was selected due to its antioxidant and anti-inflammatory properties. For HS extraction, three different methodologies (maceration, Ultrasound Assisted Extraction (UAE) and Microwave Assisted Extraction (MAE)) were compared in terms of extraction yield and extract antioxidant activity, revealing that MAE was the best procedure. Rheological and mucoadhesive properties of HS-loaded formulations were investigated. Such formulations were characterized by a low viscosity at 25 °C, guaranteeing an easy administration, a proper in situ gelation behavior and marked elastic and mucoadhesive properties at 37 °C, functional to a protective action towards the damaged mucosa. Finally, the biocompatibility and the proliferative effect of HS-loaded formulations, as well as their antioxidant and anti-inflammatory properties, were proved in vitro on human dermal fibroblasts.
Asunto(s)
Antiinflamatorios/administración & dosificación , Antioxidantes/administración & dosificación , Carragenina/química , Portadores de Fármacos/química , Extractos Vegetales/administración & dosificación , Adhesividad , Antiinflamatorios/aislamiento & purificación , Antioxidantes/aislamiento & purificación , Línea Celular , Mucosa Esofágica/efectos de los fármacos , Mucosa Esofágica/patología , Esofagitis/tratamiento farmacológico , Esofagitis/patología , Fibroblastos , Geles , Hibiscus/química , Humanos , Ensayo de Materiales , Mucosa Bucal/efectos de los fármacos , Mucosa Bucal/patología , Mucositis/tratamiento farmacológico , Mucositis/patología , Extractos Vegetales/aislamiento & purificación , Polímeros/química , Rhodophyta/química , Algas Marinas/químicaRESUMEN
Most of the methods of poly-lactic-glycolic acid (PLGA) preparation involve the passage through the emulsification of a PLGA organic solution in water followed by solvent evaporation or extraction. The choice of the droplet stabilizer during the emulsion step is critical for the dimensions and the surface characteristics of the nanoparticles (NPs). In the present work, a recently described ionic amphiphilic chitosan derivative, chitosan oleate salt (CS-OA), was proposed for the first time to prepare PLGA NPs. A full factorial design was used to understand the effect of some formulation and preparation parameters on the NP dimensions and on encapsulation efficiency (EE%) of Nile red, used as a tracer. On the basis of the DoE study, curcumin loaded NPs were prepared, having 329 ± 42 nm dimensions and 68.75% EE%. The presence of a chitosan coating at the surface was confirmed by positive zeta potential and resulted in mucoadhesion behavior. The expected improvement of the interaction of the chitosan surface modified nanoparticles with cell membrane surface was confirmed in Caco-2 cell culture by the internalization of the loaded curcumin.
Asunto(s)
Quitosano/química , Portadores de Fármacos/química , Nanopartículas/química , Adhesividad , Células CACO-2 , Curcumina/administración & dosificación , Curcumina/química , Emulsiones , Humanos , Ácido Oléico/química , Copolímero de Ácido Poliláctico-Ácido Poliglicólico/química , Solubilidad , Propiedades de SuperficieRESUMEN
Chitosan oleate was previously proposed to encapsulate in nanocarriers some poorly soluble molecules aimed to wound therapy, such as the anti-infective silver sulfadiazine, and the antioxidant α tocopherol. Because nanocarriers need a suitable formulation to be administered to wounds, in the present paper, these previously developed nanocarriers were loaded into freeze dried dressings based on chitosan glutamate. These were proposed as bioactive dressings aimed to support the application to wounds of platelet lysate, a hemoderivative rich in growth factors. The dressings were characterized for hydration capacity, morphological aspect, and rheological and mechanical behavior. Although chitosan oleate nanocarriers clearly decreased the mechanical properties of dressings, these remained compatible with handling and application to wounds. Preliminary studies in vitro on fibroblast cell cultures demonstrated good compatibility of platelet lysate with nanocarriers and bioactive dressings. An in vivo study on a murine wound model showed an accelerating wound healing effect for the bioactive dressing and its suitability as support of the platelet lysate application to wounds.
Asunto(s)
Apósitos Biológicos , Plaquetas/química , Quitosano/química , Portadores de Fármacos/química , Nanoestructuras/química , Ácido Oléico/química , Sulfadiazina de Plata/química , Heridas y Lesiones/tratamiento farmacológico , alfa-Tocoferol/química , Animales , Proliferación Celular/efectos de los fármacos , Composición de Medicamentos , Fibroblastos , Masculino , Ratas , Ratas Wistar , Reología , Piel/lesiones , Piel/patología , Heridas y Lesiones/patologíaRESUMEN
The aim of the present work was the development of chitosan ascorbate nanoparticles (CSA NPs) loaded into a fast-dissolving matrix for the delivery of antibiotic drugs in the treatment of atrophic vaginitis. CSA NPs loaded with amoxicillin trihydrate (AX) were obtained by ionotropic gelation in the presence of pentasodium tripolyphosphate (TPP). Different CSA:TPP and CSA:AX weight ratios were considered and their influence on the particle size, polydispersion index and production yield were investigated. CSA NPs were characterized for mucoadhesive, wound healing and antimicrobial properties. Subsequently, CSA NPs were loaded in polymeric matrices, whose composition was optimized using a DoE (Design of Experiments) approach (simplex centroid design). Matrices were obtained by freeze-drying aqueous solutions of three hydrophilic excipients, polyvinylpirrolidone, mannitol and glycin. They should possess a mechanical resistance suitable for the administration into the vaginal cavity and should readily dissolve in the vaginal fluid. In addition to antioxidant properties, due to the presence of ascorbic acid, CSA NPs showed in vitro mucoadhesive, wound healing and antimicrobial properties. In particular, nanoparticles were characterized by an improved antimicrobial activity with respect to a chitosan solution, prepared at the same concentration. The optimized matrix was characterized by mechanical resistance and by the fast release in simulated vaginal fluid of nanoparticles characterized by unchanged size.
Asunto(s)
Antibacterianos/farmacología , Antioxidantes/farmacología , Vaginitis Atrófica/tratamiento farmacológico , Sistemas de Liberación de Medicamentos/métodos , Nanopartículas/química , Amoxicilina/farmacología , Antioxidantes/química , Organismos Acuáticos/química , Ácido Ascórbico/química , Ácido Ascórbico/farmacología , Células Cultivadas , Quitosano/química , Quitosano/farmacología , Composición de Medicamentos/métodos , Liberación de Fármacos , Excipientes/química , Femenino , Fibroblastos , Liofilización , Humanos , Océanos y Mares , Solubilidad , Cicatrización de Heridas/efectos de los fármacosRESUMEN
With the aim of establishing the formulation of a new hydrophilic auto-gelling medical device for biomedical applications, fibroin-based microspheres were prepared. The proposed microspheres were produced by a cost-effective and industrially scalable technique, such as the spray-drying. Spray-dried silk fibroin microspheres were obtained and the effects of different hydrophilic polymer on the process yield, microsphere morphology and conformation transition of fibroin were evaluated. The final auto-gelling formulations were obtained by adding calcium gluconate (as a calcium source for alginate crosslinking) to the prepared microspheres and tested by an in vitro gelling test. This study showed that the combination of fibroin with sodium alginate and poloxamer produced the most promising auto-gelling formulation for specific biomedical applications, such as the treatment of pressure ulcers.
Asunto(s)
Alginatos/química , Bombyx/química , Gluconato de Calcio/química , Fibroínas/química , Geles/química , Poloxámero/química , Polietilenglicoles/química , Animales , Desecación , Ácido Glucurónico/química , Ácidos Hexurónicos/química , Microesferas , Tamaño de la Partícula , Polvos/químicaRESUMEN
The high rate of rejection and failure of orthopedic implants is primarily attributed to incomplete osseointegration and stress at the implant-to-bone interface due to significant differences in the mechanical properties of the implant and the surrounding bone. Various surface treatments have been developed to enhance the osteoconductive properties of implants. The aim of this work was the in vitro characterization of titanium alloy modified with a nanocrystalline hydroxyapatite surface layer in relative comparison to unmodified controls. This investigation focused on the behavior of the surface treatment in relation to the physiological environment. Moreover, the osteogenic response of human osteoblasts and adipose stem cells was assessed. Qualitative characterization of cellular interaction was performed via confocal laser scanning microscopy focusing on the cell nuclei and cytoskeletons. Filipodia were assessed using scanning electron microscopy. The results highlight that the HA treatment promotes protein adhesion as well as gene expression of osteoblasts and stem cells, which is relevant for the inorganic and organic components of the extracellular matrix and bone. In particular, cells grown onto HA-modified titanium alloy are able to promote ECM production, leading to a high expression of collagen I and non-collagenous proteins, which are crucial for regulating mineral matrix formation. Moreover, they present an impressive amount of filipodia having long extensions all over the test surface. These findings suggest that the HA surface treatment under investigation effectively enhances the osteoconductive properties of Ti6Al4V ELI.
RESUMEN
Chronic wounds represent silent epidemic affecting a large portion of the world population, especially the elders; in this context, the development of advanced bioactive dressings is imperative to accelerate wound healing process, while contrasting or preventing infections. The aim of the present work was to provide a deep characterization of the functional and biopharmaceutical properties of a sustainable thin and flexible films, composed of whey proteins alone (WPI) and added with nanostructured zinc oxide (WPZ) and intended for the management of chronic wounds. The potential of whey proteins-based films as wound dressings has been confirmed by their wettability, hydration properties, elastic behavior upon hydration, biodegradation propensity and, when added with nanostructured zinc oxide, antibacterial efficacy against both Gram-positive and Gram-negative pathogens, i.e. Staphylococcus aureus and Escherichia coli. In-vitro experiments, performed on normal human dermal fibroblasts, confirmed film cytocompatibility, also revealing the possible role of Zn2+ ions in promoting fibroblast proliferation. Finally, in-vivo studies on rat model confirmed film suitability to act as wound dressing, since able to ensure a regular healing process while providing effective protection from infections. In particular, both films WPI and WPZ are responsible for the formation in the wound bed of a continuous collagen layer similar to that of healthy skin.
Asunto(s)
Productos Biológicos , Óxido de Zinc , Humanos , Ratas , Animales , Anciano , Óxido de Zinc/farmacología , Proteína de Suero de Leche/farmacología , Antibacterianos/farmacología , ColágenoRESUMEN
Nowadays, chronic wounds are the major cause of morbidity worldwide and the healthcare costs related to wound care are a billion-dollar issue; chronic wounds involve a non-healing process that makes necessary the application of advanced wound dressings to promote skin integrity recovery. Functionally Graded Scaffolds (FGSs) are currently driving interest as promising candidates in mimicking the skin tissue environment and, thus, in enhancing a faster and more effective wound healing process. Aim of the present work was to design and develop a porous FGS based on κ-carrageenan (κCG) for the management of chronic skin wounds; a freeze-drying process was optimized to obtain in a single-step a three-layered FGS characterized by a pore size gradient functional to mimic the structure of native skin tissue. In addition to κCG, arginine and whey protein isolate were used as multifunctional agents for FGS preparation; these substances can not only intervene in some stages of wound healing but are able to establish non-covalent interactions with κCG, which were responsible for the production of layers with different pore size, water content capability and mechanical properties. Cell migration, adhesion and proliferation within the FGS structure were evaluated in vitro on fibroblasts and FGS wound healing potential was also studied in vivo on a murine model.
Asunto(s)
Carragenina , Fibroblastos , Liofilización , Cicatrización de Heridas , Liofilización/métodos , Cicatrización de Heridas/efectos de los fármacos , Animales , Porosidad , Ratones , Carragenina/química , Fibroblastos/efectos de los fármacos , Proliferación Celular/efectos de los fármacos , Movimiento Celular/efectos de los fármacos , Andamios del Tejido , Adhesión Celular , Masculino , Piel/metabolismoRESUMEN
Tendon disorders are common injuries, which can be greatly debilitating as they are often accompanied by great pain and inflammation. Moreover, several problems are also related to the laceration of the tendon-to-bone interface (TBI), a specific region subjected to great mechanical stresses. The techniques used nowadays for the treatment of tendon and TBI injuries often involve surgery. However, one critical aspect of this procedure involves the elevated risk of fail due to the tissues weakening and the postoperative alterations of the normal joint mechanics. Synthetic polymers, such as thermoplastic polyurethane, are of special interest in the tissue engineering field as they allow the production of scaffolds with tunable elastic and mechanical properties, that could guarantee an effective support during the new tissue formation. Based on these premises, the aim of this work was the design and the development of highly porous 3D scaffolds based on thermoplastic polyurethane, and doped with chondroitin sulfate and caseinophosphopeptides, able to mimic the structural, biomechanical, and biochemical functions of the TBI. The obtained scaffolds were characterized by a homogeneous microporous structure, and by a porosity optimal for cell nutrition and migration. They were also characterized by remarkable mechanical properties, reaching values comparable to the ones of the native tendons. The scaffolds promoted the tenocyte adhesion and proliferation when caseinophosphopetides and chondroitin sulfate are present in the 3D structure. In particular, caseinophosphopeptides' optimal concentration for cell proliferation resulted 2.4 mg/mL. Finally, the systems evaluation in vivo demonstrated the scaffolds' safety, since they did not cause any inflammatory effect nor foreign body response, representing interesting platforms for the regeneration of injured TBI.
Asunto(s)
Sulfatos de Condroitina , Andamios del Tejido , Andamios del Tejido/química , Porosidad , Sulfatos de Condroitina/química , Poliuretanos/química , Ingeniería de Tejidos/métodos , Regeneración Ósea , TendonesRESUMEN
Neurological disorders affecting both CNS and PNS still represent one of the most critical and challenging pathologies, therefore many researchers have been focusing on this field in recent decades. Spinal cord injury (SCI) and peripheral nerve injury (PNI) are severely disabling diseases leading to dramatic and, in most cases, irreversible sensory, motor, and autonomic impairments. The challenging pathophysiologic consequences involved in SCI and PNI are demanding the development of more effective therapeutic strategies since, as yet, a therapeutic strategy that can effectively lead to a complete recovery from such pathologies is not available. Drug delivery systems (DDSs) based on polysaccharides have been receiving more and more attention for a wide range of applications, due to their outstanding physical-chemical properties. This review aims at providing an overview of the most studied polysaccharides used for the development of DDSs intended for the repair and regeneration of a damaged nervous system, with particular attention to spinal cord and peripheral nerve injury treatments. In particular, DDSs based on chitosan and their association with alginate, dextran, agarose, cellulose, and gellan were thoroughly revised.
RESUMEN
Introduction: Recently, mycelia of Ganoderma lucidum and Pleurotus ostreatus, edible fungi, have been characterized in vitro as self-growing biomaterials for tissue engineering since they are constituted of interconnected fibrous networks resembling the dermal collagen structure. Aim: This work aims to investigate the biopharmaceutical properties of G. lucidum and P. ostreatus mycelia to prove their safety and effectiveness in tissue engineering as dermal substitutes. Methods: The mycelial materials were characterized using a multidisciplinary approach, including physicochemical properties (morphology, thermal behavior, surface charge, and isoelectric point). Moreover, preclinical properties such as gene expression and in vitro wound healing assay have been evaluated using fibroblasts. Finally, these naturally-grown substrates were applied in vivo using a murine burn/excisional wound model. Conclusions: Both G. lucidum and P. ostreatus mycelia are biocompatible and able to safely and effectively enhance tissue repair in vivo in our preclinical model.
RESUMEN
Fiber spinning technologies attracted a great interest since the beginning of the last century. Among these, electrospinning is a widely diffuse technique; however, it presents some drawbacks such as low fiber yield, high energy demand and the use of organic solvents. On the contrary, centrifugal spinning is a more sustainable method and allows to obtain fiber using centrifugal force and melted materials. The aim of the present work was the design and the development of polydioxanone (PDO) microfibers intended for tissue engineering, using centrifugal spinning. PDO, a bioresorbable polymer currently used for sutures, was selected as low melting polyester and DES (deep eutectic solvents), either choline chloride/citric acid (ChCl/CA) or betaine/citric acid (Bet/CA) 1:1 M ratio, were used to improve PDO spinnability. Physical mixtures of DES and PDO were prepared using different weight ratios. These were then poured into the spinneret and melted at 140 °C for 5 min. After the complete melting, the blends were spun for 1 min at 700 rpm. The fibers were characterized for physico chemical properties (morphology; dimensions; chemical structure; thermal behavior; mechanical properties). Moreover, the preclinical investigation was performed in vitro (biocompatibility, adhesion and proliferation of fibroblasts) and in vivo (murine burn/excisional model to assess safety and efficacy). The multidisciplinary approach allowed to obtain an extensive characterization to develop PDO based microfibers as medical device for implant to treat full thickness skin wounds.
Asunto(s)
Polidioxanona , Ingeniería de Tejidos , Ratones , Animales , Polidioxanona/química , Poliésteres/química , Piel , Polímeros , Andamios del Tejido/químicaRESUMEN
Clay minerals are historically among the most used materials with a wide variety of applications. In pharmaceutical and biomedical fields, their healing properties have always been known and used in pelotherapy and therefore attractive for their potential. In recent decades, the research has therefore focused on the systematic investigation of these properties. This review aims to describe the most relevant and recent uses of clays in the pharmaceutical and biomedical field, especially for drug delivery and tissue engineering purposes. Clay minerals, which are biocompatible and non-toxic materials, can act as carriers for active ingredients while controlling their release and increasing their bioavailability. Moreover, the combination of clays and polymers is useful as it can improve the mechanical and thermal properties of polymers, as well as induce cell adhesion and proliferation. Different types of clays, both of natural (such as montmorillonite and halloysite) and synthetic origin (layered double hydroxides and zeolites), were considered in order to compare them and to assess their advantages and different uses.