Design of XS2 (X = W or Mo)-Decorated VS2 Hybrid Nano-Architectures with Abundant Active Edge Sites for High-Rate Asymmetric Supercapacitors and Hydrogen Evolution Reactions.

Two-dimensional layered transition metal dichalcogenides have emerged as promising materials for supercapacitors and hydrogen evolution reaction (HER) applications. Herein, the molybdenum sulfide (MoS2 )@vanadium sulfide (VS2 ) and tungsten sulfide (WS2 )@VS2  hybrid nano-architectures prepared via a facile one-step hydrothermal approach is reported. Hierarchical hybrids lead to rich exposed active edge sites, tuned porous nanopetals-decorated morphologies, and high intrinsic activity owing to the strong interfacial interaction between the two materials. Fabricated supercapacitors using MoS2 @VS2  and WS2 @VS2  electrodes exhibit high specific capacitances of 513 and 615 F g- 1 , respectively, at an applied current of 2.5 A g- 1  by the three-electrode configuration. The asymmetric device fabricated using WS2 @VS2  electrode exhibits a high specific capacitance of 222 F g- 1  at an applied current of 2.5 A g- 1  with the specific energy of 52 Wh kg- 1  at a specific power of 1 kW kg- 1 . For HER, the WS2 @VS2  catalyst shows noble characteristics with an overpotential of 56 mV to yield 10 mA cm- 2 , a Tafel slope of 39 mV dec-1 , and an exchange current density of 1.73 mA cm- 2 . In addition, density functional theory calculations are used to evaluate the durable heterostructure formation and adsorption of hydrogen atom on the various accessible sites of MoS2 @VS2  and WS2 @VS2  heterostructures.

Current trends and prospects in catalytic upgrading of lignocellulosic biomass feedstock into ultrapure biofuels.

Eco-friendly renewable energy sources have recommended as fossil fuel alternatives in recent years to reduce environmental pollution and meet future energy demands in various sectors. As the largest source of renewable energy in the world, lignocellulosic biomass has received considerable interest from the scientific community to advance the fabrication of biofuels and ultrafine value-added chemicals. For example, biomass obtained from agricultural wastes could catalytically convert into furan derivatives. Among furan derivatives, 5-hydroxymethylfurfural (HMF) and 2, 5-dimethylfuran (DMF) are considered the most useful molecules that can be transformed into desirable products such as fuels and fine chemicals. Because of its exceptional properties, e.g., water insolubility and high boiling point, DMF has studied as the ideal fuel in recent decades. Interestingly, HMF, a feedstock upgraded from biomass sources can easily hydrogenate to produce DMF. In the present review, the current state of the art and studies on the transformation of HMF into DMF using noble metals, non-noble metals, bimetallic catalysts, and their composites have discussed elaborately. In addition, comprehensive insights into the operating reaction conditions and the influence of employed support over the hydrogenation process have demonstrated.

Unveiling the Redox Electrochemistry of MOF-Derived fcc-NiCo@GC Polyhedron as an Advanced Electrode Material for Boosting Specific Energy of the Supercapattery.

Metal organic frameworks (MOFs), which constitute a new class of porous organic-inorganic hybrid materials, have gained considerable attention in the fields of electrochemical energy storage and conversion devices owing to their open topological structures, large surface areas, tunable morphologies, and extreme redox activity. A synthesis protocol that comprises coprecipitation followed by controlled calcination processes to design a battery-type electrode is used. This electrode consists of three-dimensional (3D), ant cave-like polyhedrons of nickel-cobalt alloy on graphitic carbon (GC; NiCo@GC) nanostructures; trimesic acid is used as a potential MOF-linker. The developed NiCo@GC sample exhibits mesoporous characteristics with the maximum surface area of 94.08 m2 g-1 at 77 K. In addition, the redox activity at different sweep rates reveals the battery-type charge storage behavior of the NiCo@GC electrode; its three-electrode assembly provides 444 C g-1 specific capacity at 2 A g-1 with long-term capacity retention. The constructed supercapattery (SC) devices (i.e., AC//NiCo@GC) achieved capacity, specific energy, and specific power are 74.3 mAh g-1 , 39.5 Wh kg-1 , and 665 W kg-1 , respectively. Owing to its reasonable electrochemical characteristics, the prepared NiCo@GC material is a promising candidate for supercapattery electrodes for portable electronic devices.

Impact of Molybdenum Dichalcogenides on the Active and Hole-Transport Layers for Perovskite Solar Cells, X-Ray Detectors, and Photodetectors.

The interface architectures of inorganic-organic halide perovskite-based devices play key roles in achieving high performances with these devices. Indeed, the perovskite layer is essential for synergistic interactions with the other practical modules of these devices, such as the hole-/electron-transfer layers. In this work, a heterostructure geometry comprising transition-metal dichalcogenides (TMDs) of molybdenum dichalcogenides (MoX2  = MoS2 , MoSe2 , and MoTe2 ) and perovskite- or hole-transfer layers is prepared to achieve improved device characteristics of perovskite solar cells (PSCs), X-ray detectors, and photodetectors. A superior efficiency of 11.36% is realized for the active layer with MoTe2 in the PSC device. Moreover, X-ray detectors using modulated MoTe2 nanostructures in the active layers achieve 296 nA cm-2 , 3.12 mA (Gy cm2 )-1 and 3.32 × 10-4 cm2 V-1 s-1 of collected current density, sensitivity, and mobility, respectively. The fabricated photodetector produces a high photoresponsivity of 956 mA W-1 for a visible light source, with an excellent external quantum efficiency of 160% for the perovskite layer containing MoSe2 nanostructures. Density functional theory calculations are made for pure and MoX2 doped perovskites' geometrical, density of states and optical properties variations evidently. Thus, the present study paves the way for using perovskite-based devices modified by TMDs to develop highly efficient semiconductor devices.

Ternary Zn1-xNixSe nanostructures as efficient photocatalysts for detoxification of hazardous Congo red, methyl orange, and chrome yellow dyes in wastewater sources.

Water contamination by hazardous organic pollutants poses an extreme threat to the environment and globally endangers aquatic life and human health. Hence, the removal of toxic organic effluents from water sources is necessary to ensure a healthy green environment. To this end, a new class of emerging, visible-light-driven Zn- and Ni-based ternary metal-selenide (Zn1-xNixSe) nanophotocatalysts, with tunable nanostructures via regulation of the stoichiometric ratios of Zn and Ni, were synthesized for efficient water purification by a facile one-pot hydrothermal process. These catalysts exhibit outstanding porous properties, with large surface areas and average particle sizes of around 80 ± 10 nm. The as-prepared ternary Zn1-xNixSe catalysts enable improved optical properties, intrinsic conductivity, bandgap reductions, and large numbers of active sites compared with pristine materials, thereby exhibiting outstanding degradation properties against various dye molecules, including Congo red, methyl orange, and chrome-IV upon visible light irradiation. The improved photodegradation capabilities of the Zn1-xNixSe catalysts may be attributed to the synergistic combinations of Zn and Ni selenides, which in turn minimize the recombination rates of the photogenerated carriers compared to their individual constituents. These findings clearly demonstrate that the proposed ternary Zn1-xNixSe catalysts could be potentially used to remove toxic organic contaminants from industrial wastewater.

High-Performance Platinum-Free Dye-Sensitized Solar Cells with Molybdenum Disulfide Films as Counter Electrodes.

By using a radio-frequency sputtering method, we synthesized large-area, uniform, and transparent molybdenum disulfide film electrodes (1, 3, 5, and 7 min) on transparent and conducting fluorine-doped tin oxide (FTO), as ecofriendly, cost-effective counter electrodes (CE) for dye-sensitized solar cells (DSSCs). These CEs were used in place of the routinely used expensive platinum CEs for the catalytic reduction of a triiodide electrolyte. The structure and morphology of the MoS2 was analyzed by using Raman spectroscopy, X-ray diffraction, and X-ray photoemission spectroscopy measurements and the DSSC characteristics were investigated. An unbroken film of MoS2 was identified on the FTO crystallites from field-emission scanning electron microscopy. Cyclic voltammetry, electrochemical impedance spectroscopy, and Tafel curve measurements reveal the promise of MoS2 as a CE with a low charge-transfer resistance, high electrocatalytic activity, and fast reaction kinetics for the reduction of triiodide to iodide. Finally, an optimized transparent MoS2 CE, obtained after 5 min synthesis time, showed a high power-conversion efficiency of 6.0 %, which comparable to the performance obtained with a Pt CE (6.6 %) when used in TiO2 -based DSCCs, thus signifying the importance of sputtering time on DSSC performance.

Solar Hydrogen Production and Storage in Solid Form: Prospects for Materials and Methods.

Climatic changes are reaching alarming levels globally, seriously impacting the environment. To address this environmental crisis and achieve carbon neutrality, transitioning to hydrogen energy is crucial. Hydrogen is a clean energy source that produces no carbon emissions, making it essential in the technological era for meeting energy needs while reducing environmental pollution. Abundant in nature as water and hydrocarbons, hydrogen must be converted into a usable form for practical applications. Various techniques are employed to generate hydrogen from water, with solar hydrogen production-using solar light to split water-standing out as a cost-effective and environmentally friendly approach. However, the widespread adoption of hydrogen energy is challenged by transportation and storage issues, as it requires compressed and liquefied gas storage tanks. Solid hydrogen storage offers a promising solution, providing an effective and low-cost method for storing and releasing hydrogen. Solar hydrogen generation by water splitting is more efficient than other methods, as it uses self-generated power. Similarly, solid storage of hydrogen is also attractive in many ways, including efficiency and cost-effectiveness. This can be achieved through chemical adsorption in materials such as hydrides and other forms. These methods seem to be costly initially, but once the materials and methods are established, they will become more attractive considering rising fuel prices, depletion of fossil fuel resources, and advancements in science and technology. Solid oxide fuel cells (SOFCs) are highly efficient for converting hydrogen into electrical energy, producing clean electricity with no emissions. If proper materials and methods are established for solar hydrogen generation and solid hydrogen storage under ambient conditions, solar light used for hydrogen generation and utilization via solid oxide fuel cells (SOFCs) will be an efficient, safe, and cost-effective technique. With the ongoing development in materials for solar hydrogen generation and solid storage techniques, this method is expected to soon become more feasible and cost-effective. This review comprehensively consolidates research on solar hydrogen generation and solid hydrogen storage, focusing on global standards such as 6.5 wt% gravimetric capacity at temperatures between -40 and 60 °C. It summarizes various materials used for efficient hydrogen generation through water splitting and solid storage, and discusses current challenges in hydrogen generation and storage. This includes material selection, and the structural and chemical modifications needed for optimal performance and potential applications.

Metal oxide-embedded carbon-based materials for polymer solar cells and X-ray detectors.

This study examines the effects of hybrid nanoparticles made of NiO@rGO (reduced graphene oxide) and NiO@CNT (carbon nanotubes) on PCDTBT and PCBM active layers in glass/ITO/HTL/active-layer/LiF/Al structured bulk heterojunction (BHJ) polymer solar cells (PSCs) and X-ray photodetectors. These hybrid nanoparticles were used to create BHJ solar cells and photodetectors, and microscopic research was conducted to determine how they affect the structure of the devices. The findings show that compared to conventional matrices, the active layers with NiO@rGO and NiO@CNT incorporation have increased the charge carrier capacities and exciton dissociation properties. In order to assess their impact on the characteristics of charge transport, various weight ratios of these hybrid nanoparticles dispersed in polymer junctions are being investigated. Notably, compared to the pure PCDTBT:PCBM active layer (power conversion efficiency (PCE) = 4.35%), the NiO@CNT device has the highest PCE = 6.42% which, among the tested configurations, demonstrates its superior performance in converting sunlight into electricity. Among the tested X-ray detector materials, "NiO@CNT" achieves the best performance with a sensitivity of 1.92 mA Gy-1 cm-2. Through improved interfacial behaviors and effective charge transport, this work highlights the potential of these cutting-edge hybrid nanoparticles to enhance the performance of organic electronic devices.

Optical and UV Shielding Properties of Inorganic Nanoparticles Embedded in Polymethyl Methacrylate Nanocomposite Freestanding Films.

Polymethyl methacrylate (PMMA) is an interesting polymer employed in various applications due to its outstanding properties. However, its electrical and mechanical properties can be further improved by incorporating nanoparticles, and in particular, PMMA nanocomposite with nanoparticles provides various multifunctional properties. This work reports PMMA nanocomposite preparation and structural and optical characterizations incorporating carbon nanotubes (CNTs), TiO2 nanoparticles, and carbon quantum dots (CQDs). CNT/PMMA, TiO2/PMMA, and CQD/PMMA nanocomposite freestanding films were prepared using a simple solution method. Various properties of the prepared composite films were analyzed using scanning electron microscopy, X-ray diffraction, photoluminescence, Fourier transform infrared, and UV-Vis and Raman spectroscopy. Optical parameters and photocatalytic dye degradation for the films are reported, focusing on the properties of the materials. The CNT/PMMA, TiO2/PMMA, and CQD/PMMA films achieved, respectively, good electrical conductivity, photodegradation, and fluorescence compared with other composite films.

Naphthalene derived Schiff base as a reversible fluorogenic chemosensor for aluminium ions detection.

Schiff base (HNPD) was achieved by reacting 2-hydroxy-1-naphthaldehyde with N-phenyl-o-phenylenediamine in enthanol medium. The spectroscopic analyses were done to establish the formation of Schiff base apparently. Further, synthesized Schiff base conjugate was successfully used as a fluorogenic chemosensor to detect aluminium ions (Al3+) with high fluorescence amplification among the other interfering various metal ions. The limit of detection of 0.0248 × 10-6 M and a binding constant of 6.19 × 103 M-1 were obtained by the receptor HNPD for Al3+ detection. A high influence of intramolecular charge transfer kinetics was established to realize the selective responsiveness towards Al3+ ions. Density functional theory approximation formulated the band energy modulation and localization and delocalization of electron density for the HNPD and Al3+ complexation. The developed sensor ultimately inspected on the real soil and water samples and ascertained the practical ability of Al3+ ions detection of HNPD chemosensor.

Fabrication of chitosan/fibrin-armored multifunctional silver nanocomposites to improve antibacterial and wound healing activities.

A wound healing substitute promotes rapid tissue regeneration and protects wound sites from microbial contamination. The silver-based antiseptic frequently moist skin stains, burns and irritation, penetrates deep wounds and protects against pathogenic infections. Thus, we formulated a novel fibrin/chitosan encapsulated silver nanoparticle (CH:F:SPG-CH:SNP) composites bandage accelerating the polymicrobial wound healing. Electrospinning method was employed to form the nano-porous, inexpensive, and biocompatible smart bandages. The structural, functional, and mechanical properties were analyzed for the prepared composites. The biological capacity of prepared CH:F:SPG-CH:SNP bandage was assessed against NIH-3 T3 fibroblast and HaCaT cell lines. In vitro hemolytic assays using red blood cells were extensively studied and explored the low hemolytic effect (4.5 %). In addition, the improved drug delivery nature captured for the CH:F:SPG-CH:SNP composite bandage. Antibacterial experiments were achieved against Pseudomonas aeruginosa, Escherichia coli, Staphylococcus aureus and Lactobacillus bulgaricus using zone inhibition method. Moreover, in-vivo wound healing efficacy of fabricated smart bandage was evaluated on the albino Wistar rats which revealed the significant improvement on the postoperative abdomen wounds.

Development of chitosan-based cerium and titanium oxide loaded polycaprolactone for cutaneous wound healing and antibacterial applications.

Cerium dioxide (CeO2) based nanomaterials have emerged as promising dermal equivalents, promoting fibroblast infiltration and tissues regeneration. To enhance the antibacterial and wound healing activity, herein chitosan (CS)-CeO2 combined nano titanium dioxide (TiO2) complex loaded polycaprolactone (PCL) nanohybrid (CS-CeO2/TiO2/PCL) scaffolds were prepared through casting method. The nanohybrid scaffolds' physiochemical, morphological, mechanical, and biological properties were evaluated using advanced analytical techniques. Fourier transform infrared spectroscopy spectrum evidently depicted the various intermolecular interactions on the nanohybrid scaffolds. The developed scaffold exhibited the high swelling behavior and good degradability and permeability which is beneficial for absorbing wound transudation to fasten the healing efficacy. Moreover, CS-CeO2/TiO2/PCL scaffolds owned the better antibacterial activity against bacterial strains E. coli and S. aureus. Also, MTT assay on fibroblast (NIH 3T3) cells and immortalized human keratinocytes (HaCaT) cells indicated improved cell viability and proliferation. In vivo results revealed that the fabricated scaffold full aid to complete wound closure after 14 days which showed CS-CeO2/TiO2/PCL as the significant wound dressing material with potential antibacterial immunity.

Chitosan-Integrated Curcumin-Graphene Oxide/Copper Oxide Hybrid Nanocomposites for Antibacterial and Cytotoxicity Applications.

This study deals with the facile synthesis of a single-pot chemical technique for chitosan-curcumin (CUR)-based hybrid nanocomposites with nanostructured graphene oxide (GO) and copper oxide (CuO) as the antibacterial and cytotoxic drugs. The physicochemical properties of synthesized hybrid nanocomposites such as CS-GO, CS-CuO, CS-CUR-GO, and CS-CUR-GO/CuO were confirmed with various advanced tools. Moreover, the in vitro drug release profile of the CS-CUR-GO/CuO nanocomposite exhibited sustained and controlled release during different time intervals. Also, the antibacterial activity of the CS-CUR-GO/CuO hybrid nanocomposite presented the maximum bactericidal effect against Staphylococcus aureus and Escherichia coli pathogens. The hybrid nanocomposites revealed improved cytotoxicity behaviour against cultured mouse fibroblast cells (L929) via cell adhesion, DNA damage, and proliferation. Thus, the chitosan-based hybrid nanocomposites offer rich surface area, biocompatibility, high oxidative stress, and bacterial cell disruption functionalities as a potential candidate for antibacterial and cytotoxicity applications.

Formulation of Hierarchical Nanowire-Structured CoNiO2 and MoS2/CoNiO2 Hybrid Composite Electrodes for Supercapacitor Applications.

Hierarchical porous nanowire-like MoS2/CoNiO2 nanohybrids were synthesized via the hydrothermal process. CoNiO2 nanowires were selected due to the edge site, high surface/volume ratio, and superior electrochemical characteristics as the porous backbone for decoration of layered MoS2 nanoflakes to construct innovative structure hierarchical three-dimensional (3D) porous NWs MoS2/CoNiO2 hybrids with excellent charge accumulation and efficient ion transport capabilities. Physicochemical analyses were conducted on the developed hybrid composite, revealing conclusive evidence that the CoNiO2 nanowires have been securely anchored onto the surface of the MoS2 nanoflake array. The electrochemical results strongly proved the benefit of the hierarchical 3D porous MoS2/CoNiO2 hybrid structure for the charge storage kinetics. The synergistic characteristics arising from the MoS2/CoNiO2 composite yielded a notably high specific capacitance of 1340 F/g at a current density of 0.5 A/g. Furthermore, the material exhibited sustained cycling stability, retaining 95.6% of its initial capacitance after 10 000 long cycles. The asymmetric device comprising porous MoS2/CoNiO2//activated carbon encompassed outstanding energy density (93.02 Wh/kg at 0.85 kW/kg) and cycling stability (94.1% capacitance retention after 10 000 cycles). Additionally, the successful illumination of light-emitting diodes underscores the significant potential of the synthesized MoS2/CoNiO2 (2D/1D) hybrid for practical high-energy storage applications.

Enhancement of Electron Transport Characteristics Using MXene-MnFeO3 Nanocomposite Integration with Fullerene Derivatives for the Perovskite-Based Solar Cells and Detectors.

In this study, we prepared a hybrid film incorporating the MnFeO3-decorated conducting two-dimensional (2D) MXene sheet-suspended [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) electron transfer layer (ETL) for the perovskite solar cells (PSCs) and detectors. The incorporation of MXene-MnFeO3 with the PCBM ETL could drive exceptional conducting features for the PSCs. Moreover, the presence of MXene-MnFeO3 facilitated superior charge transfer pathways, thereby enhancing the electron extraction and collection processes. This enhancement was directed to improve the electron mobility within the device, resulting in high photocurrents. The designed interface engineering with the MXene-MnFeO3 nanocomposite-tuned PCBM ETL has produced a remarkable power conversion efficiency of 17.79% ± 0.27. Moreover, X-ray detectors employing PCBM modulated with the MXene-MnFeO3 ETL achieved notable performance metrics including 18.47 µA/cm2 CCD-DCD, 5.53 mA/Gy·cm2 sensitivity, 7.64 × 10-4 cm2/V·s electron mobility, and 1.51 × 1015 cm2/V·s trap density.

Density Functional Theory Approximations and Experimental Investigations on Co1-xMoxTe2 Alloy Electrocatalysts Tuning the Overall Water Splitting Reactions.

Understanding the relationship between electronic structure, surface characteristic, and reaction process of a catalyst helps to architect proficient electrodes for sustainable energy development. The highly active and stable catalysts made of earth-abundant materials provide a great endeavor toward green hydrogen production. Herein, we assembled the Co1-xMoxTe (x = 0-1) nanoarray structures into a bifunctional electrocatalyst to achieve high-performance hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) kinetics under alkaline conditions. The designed Co0.75Mo0.25Te and Co0.50Mo0.50 electrocatalysts require minimum overpotential and Tafel slope for high-efficacy HER and OER, respectively. Furthermore, we constructed a Co0.50Mo0.50Te2∥Co0.50Mo0.50Te2 device for overall water splitting with an overpotential of 1.39 V to achieve a current density of 10 mA cm-2, which is superior to noble electrocatalyst performance, with stable reaction throughout the 50 h continuous process. Density functional theory approximations and Gibbs free energy calculations validate the enhanced water splitting reaction catalyzed by the Co0.50Mo0.50Te2 nanoarrays. The partial replacement of Co atoms with Mo atoms in the Co0.50Mo0.50Te2 structure substantially enhances the water electrolysis kinetics through the synergistic effects between the combined metal atoms and the bonded chalcogen.

Room-temperature response of MOF-derived Pd@PdO core shell/γ-Fe2O3 microcubes decorated graphitic carbon based ultrasensitive and highly selective H2 gas sensor.

With the current upsurge in hydrogen economies all over the world, an increased demand for improved chemiresistive H2 sensors that are highly responsive and fast acting when exposed to gases is expected. Owing to safety concerns about explosive and highly flammable H2 gas, it is important to develop resistive sensors that can detect the leakage of H2 gas swiftly and selectively. Currently, interest in metal-organic frameworks (MOFs) for gas-sensor applications is increasing due to their open-metal sites, large surface area, and unique surface morphologies. In this research, a highly selective and sensitive H2-sensor was established based on graphitic carbon (GC) anchored spherical Pd@PdO core-shells over γ-Fe2O3 microcube (Pd@PdO/γ-Fe2O3@GC which is termed as S3) heterostructure materials. The combined solvothermal followed by controlled calcination-assisted S3 exhibited a specific morphology with the highest surface area of 79.12 m2 g-1, resulting in fast response and recovery times (21 and 29 s, respectively), and excellent sensing performance (ΔR/R0∼ 96.2 ± 1.5), outstanding long-term stability, and a 100 ppb detection limit when detecting H2-gas at room temperature (mainly in very humid surroundings). This result proves that adsorption sites provided by S3 can promote surface reactions (adsorption and desorption) for ultrasensitive and selective H2gas sensors.

Tuning of electron transport layers using MXene/metal-oxide nanocomposites for perovskite solar cells and X-ray detectors.

This work elaborates on the decoration of metal oxides (ZnO and Fe3O4) between MXene sheets for use as the supporting geometry of PCBM electron transport layers (ETLs) in perovskite solar cells and X-ray detectors. The metal oxide supports for carrying the plentiful charge carriers and the hydrophobic nature of MXenes provide an easy charge transfer path through their flakes and a smooth surface for the ETL. The developed interface engineering based on the MXene/ZnO and MXene/Fe3O4 hybrid ETL results in improved power conversion efficiencies (PCEs) of 13.31% and 13.79%, respectively. The observed PCE is improved to 25.80% and 30.34% by blending the MXene/ZnO and MXene/Fe3O4 nanoparticles with the PCBM layer, respectively. Various factors, such as surface modification, swift interfacial interaction, roughness decrement, and charge transport improvement, are strongly influenced to improve the device performance. Moreover, X-ray detectors with the MXene/Fe3O4-modulated PCBM ETL achieve a CCD-DCD, sensitivity, mobility, and trap density of 15.46 µA cm-2, 4.63 mA per Gy per cm2, 5.21 × 10-4 cm2 V-1 s-1, and 1.47 × 1015 cm2 V-1 s-1, respectively. Metal oxide-decorated MXene sheets incorporating the PCBM ETL are a significant route for improving the photoactive species generation, long-term stability, and high mobility of perovskite-based devices.

Synthesis of chitosan based reduced graphene oxide-CeO2 nanocomposites for drug delivery and antibacterial applications.

In this study, the unique characteristics of chitosan, reduced graphene oxide (rGO) and cerium oxide (CeO2) based hybrid bionano-composites make a carrier for various drug delivery and antimicrobial applications. The recent literatures shown that addition of biopolymers to rGO and CeO2 based nanocomposites exhibit excellent performance in design and development of biosensors, wound dressings, electrodes, microfluidic chips, drug delivery systems and energy storage applications. Chitosan (CS), reduced graphene oxide (rGO) mixed with cerium oxide (CeO2) to form CS-rGO and CS-rGO-CeO2 hybrid bionano-composites using precipitation method. The physiochemical characterization of casted nanocomposite sheet was done using FTIR, XRD, UV-Vis spectrum, SEM and TGA. The XRD results of CS-rGO-CeO2 revealed that the nanoparticle was found to be crystalline structure. FTIR revealed that nitrogen functionalities of CS interacted with rGO-CeO2 to form hybrid nanocomposites. The thermal gravimetric analysis (TGA) showed that the CS-rGO-CeO2 has better thermal stability up to 550 °C. The SEM confirms the surface morphology of CS-rGO-CeO2 has large surface area with smooth surface. Moreover, the antibacterial properties of nanocomposites exhibit excellent zone of inhibition against Staphylococcus aureus and Escherichia coli. The NIH3T3 cell line evaluations showed superior cell adhesion on hybrid nanocomposites. Hence bionano-composite based on CS, rGO and CeO2 are potential biomaterials for drug delivery and antibacterial applications.

Unveiling the redox electrochemical kinetics of interconnected wrinkled microspheres of binary Cu2-xSe/Ni1-xSe as battery-type electrode for advanced supercapatteries.

Developing a rational design of nanoarchitechtures with excellent electrochemical behaviors is an ultimate and unique strategy to enhance the redox electrokinetics of battery-type electrode materials. Herein, we demonstrate a hierarchical composite comprising interconnected wrinkled micro-solid sphere (ICWMS)-like binary copper selenide/nickel selenide over nickel foam (Cu2-xSe/Ni1-xSe/NF) prepared via a wet chemical synthetic protocol and utilized as an effective positrode for improved supercapaterry performance. The binary Cu2-xSe/Ni1-xSe/NF electrode considerably improved the electroactive surface area and facilitated ultrafast redox electrochemistry in an alkaline electrolyte medium. Remarkably, the binary Cu2-xSe/Ni1-xSe/NF electrode afforded the highest specific capacity of 368 ± 1C/g at 1 A/g greater than that of pristine single selenide electrodes (Cu2Se and NiSe) in a three-electrode setup which might be attributed to its large surface area, synergism between Ni and Cu, and specific morphology. Moreover, a coin cell supercapattery with the binary Cu2-xSe/Ni1-xSe/NF positrode and a porous activated carbon-on-nickel-foam negatrode was constructed, which exhibited excellent energy-storage characteristics in terms of capacity (87.5 ± 1 mAh/g), specific energy (39.3 Wh kg-1), specific power (450 W kg-1), and capacity retention (91.8 %). This simple fabrication approach of hierarchically designed Cu2-xSe/Ni1-xSe/NF paves the way for utilizing it as the promising positrode for high-performance supercapattery.