Silver and Copper Nitride Cooperate for CO Electroreduction to Propanol.

The need of carbon sources for the chemical industry, alternative to fossil sources, has pointed to CO2 as a possible feedstock. While CO2 electroreduction (CO2 R) allows production of interesting organic compounds, it suffers from large carbon losses, mainly due to carbonate formation. This is why, quite recently, tandem CO2 R, a two-step process, with first CO2 R to CO using a solid oxide electrolysis cell followed by CO electroreduction (COR), has been considered, since no carbon is lost as carbonate in either step. Here we report a novel copper-based catalyst, silver-doped copper nitride, with record selectivity for formation of propanol (Faradaic efficiency: 45 %), an industrially relevant compound, from CO electroreduction in gas-fed flow cells. Selective propanol formation occurs at metallic copper atoms derived from copper nitride and is promoted by silver doping as shown experimentally and computationally. In addition, the selectivity for C2+ liquid products (Faradaic efficiency: 80 %) is among the highest reported so far. These findings open new perspectives regarding the design of catalysts for production of C3 compounds from CO2 .

Versatile and robust synthesis process for the fine control of the chemical composition and core-crystallinity of spherical core-shell Au@Ag nanoparticles.

Au nanoparticles (NPs) characterized by distinct surface chemistry (including dodecanethiol or oleylamine as capping agent), different sizes (∼5 and ∼10 nm) and crystallinities (polycrystalline or single crystalline), were chosen as seeds to demonstrate the versatility and robustness of our two-step core-shell Au@Ag NP synthesis process. The central component of this strategy is to solubilize the shell precursor (AgNO3) in oleylamine and to induce the growth of the shell on selected seeds under heating. The shell thickness is thus controlled by the temperature, the annealing time, the (shell precursor)/(seed) concentration ratio, seed size and crystallinity. The shell thickness is thus shown to increase with the reactant concentration and to grow faster on polycrystalline seeds. The crystalline structure and chemical composition were characterized by HRTEM, STEM-HAADF, EELS and Raman spectroscopy. The plasmonic response of Au@Ag core-shell NPs as a function of core size and shell thickness was assessed by spectrophotometry and simulated by calculations based on the discrete dipole approximation (DDA) method. Finally, the nearly monodisperse core-shell Au@Ag NPs were shown to form micrometer-scale facetted 3D fcc-ordered superlattices (SLs) after solvent evaporation and deposition on a solid substrate. These SLs are promising candidates for applications as a tunable surface-enhanced Raman scattering platform.

Antimalarial activity of tetrahydro-ß-carbolines targeting the ATP binding pocket of the Plasmodium falciparum heat shock 90 protein.

A series of tetrahydro-ß-carboline derivatives of a lead compound known to target the heat shock 90 protein of Plasmodium falciparum were synthesized and assayed for both potency against the parasite and toxicity against a human cell line. Using a rationalized structure based design strategy, a new lead compound with a potency two orders of magnitude greater than the original lead compound was found. Additional modeling of this new lead compound suggests multiple avenues to further increase potency against this target, potentially paving the path for a therapeutic with a mode of action different than any current clinical treatment.

A novel 96.5Sn3Cu0.5Mn nanosolder with enhanced wettability applied to nanosoldering of WO3 nanomaterial.

Nano-soldering relying on a sacrificial nanosolder, is a flexible interconnection technique, having promising applications in joining nanosized functional materials; that is an essential step in the assembly of nano-devices. In a soldering, the wettability is important in the bonding of two nanomaterial, which determines the quality of the junction. Tungsten trioxide nanomaterial has unique characteristics such as electro-, opto-, gaso-chromic. To assemble this nanomaterial into functional nano-devices, a superior nanosolder is necessary. The conventional SnCu nanosolder has been chosen, but its wetting on WO3 is unsatisfactory. Here, our study indicates that the SnCu wettability on WO3 material has been improved greatly by adding minor manganese, in which the contact angle has a significant change from 73.2° to 41.7°. Then the wetting mechanism is investigated by observing the soldering interface. Lastly, a more robust and higher-reliable junction has been obtained by thermal soldering two individual WO3 nano-objects into a cross-shaped pattern.

Computational Modeling of Developing Cartilage Using Experimentally Derived Geometries and Compressive Moduli.

During chondrogenesis, tissue organization changes dramatically. We previously showed that the compressive moduli of chondrocytes increase concomitantly with extracellular matrix (ECM) stiffness, suggesting cells were remodeling to adapt to the surrounding environment. Due to the difficulty in analyzing the mechanical response of cells in situ, we sought to create an in silico model that would enable us to investigate why cell and ECM stiffness increased in tandem. The goal of this study was to establish a methodology to segment, quantify, and generate mechanical models of developing cartilage to explore how variations in geometry and material properties affect strain distributions. Multicellular geometries from embryonic day E16.5 and postnatal day P3 murine cartilage were imaged in three-dimensional (3D) using confocal microscopy. Image stacks were processed using matlab to create geometries for finite element analysis using ANSYS. The geometries based on confocal images and isolated, single cell models were compressed 5% and the equivalent von Mises strain of cells and ECM were compared. Our simulations indicated that cells had similar strains at both time points, suggesting that the stiffness and organization of cartilage changes during development to maintain a constant strain profile within cells. In contrast, the ECM at P3 took on more strain than at E16.5. The isolated, single-cell geometries underestimated both cell and ECM strain and were not able to capture the similarity in cell strain at both time points. We expect this experimental and computational pipeline will facilitate studies investigating other model systems to implement physiologically derived geometries.

Atomic-Scale Determination of Cation Inversion in Spinel-Based Oxide Nanoparticles.

The atomic structure of nanoparticles can be easily determined by transmission electron microscopy. However, obtaining atomic-resolution chemical information about the individual atomic columns is a rather challenging endeavor. Here, crystalline monodispersed spinel Fe3O4/Mn3O4 core-shell nanoparticles have been thoroughly characterized in a high-resolution scanning transmission electron microscope. Electron energy-loss spectroscopy (EELS) measurements performed with atomic resolution allow the direct mapping of the Mn2+/Mn3+ ions in the shell and the Fe2+/Fe3+ in the core structure. This enables a precise understanding of the core-shell interface and of the cation distribution in the crystalline lattice of the nanoparticles. Considering how the different oxidation states of transition metals are reflected in EELS, two methods of performing a local evaluation of the cation inversion in spinel lattices are introduced. Both methods allow the determination of the inversion parameter in the iron oxide core and manganese oxide shell, as well as detecting spatial variations in this parameter, with atomic resolution. X-ray absorption measurements on the whole sample confirm the presence of cation inversion. These results present a significant advance toward a better correlation of the structural and functional properties of nanostructured spinel oxides.

Suppression Measured from Chinchilla Auditory-Nerve-Fiber Responses Following Noise-Induced Hearing Loss: Adaptive-Tracking and Systems-Identification Approaches.

The compressive nonlinearity of cochlear signal transduction, reflecting outer-hair-cell function, manifests as suppressive spectral interactions; e.g., two-tone suppression. Moreover, for broadband sounds, there are multiple interactions between frequency components. These frequency-dependent nonlinearities are important for neural coding of complex sounds, such as speech. Acoustic-trauma-induced outer-hair-cell damage is associated with loss of nonlinearity, which auditory prostheses attempt to restore with, e.g., "multi-channel dynamic compression" algorithms.Neurophysiological data on suppression in hearing-impaired (HI) mammals are limited. We present data on firing-rate suppression measured in auditory-nerve-fiber responses in a chinchilla model of noise-induced hearing loss, and in normal-hearing (NH) controls at equal sensation level. Hearing-impaired (HI) animals had elevated single-fiber excitatory thresholds (by ~ 20-40 dB), broadened frequency tuning, and reduced-magnitude distortion-product otoacoustic emissions; consistent with mixed inner- and outer-hair-cell pathology. We characterized suppression using two approaches: adaptive tracking of two-tone-suppression threshold (62 NH, and 35 HI fibers), and Wiener-kernel analyses of responses to broadband noise (91 NH, and 148 HI fibers). Suppression-threshold tuning curves showed sensitive low-side suppression for NH and HI animals. High-side suppression thresholds were elevated in HI animals, to the same extent as excitatory thresholds. We factored second-order Wiener-kernels into excitatory and suppressive sub-kernels to quantify the relative strength of suppression. We found a small decrease in suppression in HI fibers, which correlated with broadened tuning. These data will help guide novel amplification strategies, particularly for complex listening situations (e.g., speech in noise), in which current hearing aids struggle to restore intelligibility.

Acrolein involvement in sensory and behavioral hypersensitivity following spinal cord injury in the rat.

Growing evidence suggests that oxidative stress, as associated with spinal cord injury (SCI), may play a critical role in both neuroinflammation and neuropathic pain conditions. The production of the endogenous aldehyde acrolein, following lipid peroxidation during the inflammatory response, may contribute to peripheral sensitization and hyperreflexia following SCI via the TRPA1-dependent mechanism. Here, we report that there are enhanced levels of acrolein and increased neuronal sensitivity to the aldehyde for at least 14 days after SCI. Concurrent with injury-induced increases in acrolein concentration is an increased expression of TRPA1 in the lumbar (L3-L6) sensory ganglia. As proof of the potential pronociceptive role for acrolein, intrathecal injections of acrolein revealed enhanced sensitivity to both tactile and thermal stimuli for up to 10 days, supporting the compound's pro-nociceptive functionality. Treatment of SCI animals with the acrolein scavenger hydralazine produced moderate improvement in tactile responses as well as robust changes in thermal sensitivity for up to 49 days. Taken together, these data suggest that acrolein directly modulates SCI-associated pain behavior, making it a novel therapeutic target for preclinical and clinical SCI as an analgesic. Following spinal cord injury (SCI), acrolein involvement in neuropathic pain is likely through direct activation and elevated levels of pro-nociceptive channel TRPA1. While acrolein elevation correlates with neuropathic pain, suppression of this aldehyde by hydralazine leads to an analgesic effect. Acrolein may serve as a novel therapeutic target for preclinical and clinical SCI to relieve both acute and chronic post-SCI neuropathic pain.

Neuroprotective role of hydralazine in rat spinal cord injury-attenuation of acrolein-mediated damage.

Acrolein, an α,ß-unsaturated aldehyde and a reactive product of lipid peroxidation, has been suggested as a key factor in neural post-traumatic secondary injury in spinal cord injury (SCI), mainly based on in vitro and ex vivo evidence. Here, we demonstrate an increase of acrolein up to 300%; the elevation lasted at least 2 weeks in a rat SCI model. More importantly, hydralazine, a known acrolein scavenger can provide neuroprotection when applied systemically. Besides effectively reducing acrolein, hydralazine treatment also resulted in significant amelioration of tissue damage, motor deficits, and neuropathic pain. This effect was further supported by demonstrating the ability of hydralazine to reach spinal cord tissue at a therapeutic level following intraperitoneal application. This suggests that hydralazine is an effective neuroprotective agent not only in vitro, but in a live animal model of SCI as well. Finally, the role of acrolein in SCI was further validated by the fact that acrolein injection into the spinal cord caused significant SCI-like tissue damage and motor deficits. Taken together, available evidence strongly suggests a critical causal role of acrolein in the pathogenesis of spinal cord trauma. Since acrolein has been linked to a variety of illness and conditions, we believe that acrolein-scavenging measures have the potential to be expanded significantly ensuring a broad impact on human health.

Identification of ferrous-ferric Fe3O4 nanoparticles in recombinant human ferritin cages.

Recombinant ferritin is an excellent template for the synthesis of magnetic nanoparticles. This paper describes carefully performed experiments both to identify ironoxides within nanoparticles and to measure the number of iron atoms in the cores of recombinant human H-chain ferritin (HFn), based on spectroscopy techniques. Using electron energy-loss spectroscopy (EELS) analysis, magnetite (Fe3O4) has been unequivocally identified as the ironoxide formed within HFn cores under special preparation conditions. Atom counting analysis by EELS and high-angle annular dark-field imaging further allowed the correlation of the particle sizes to the real Fe atom numbers in a quantitative manner. These results help clarify some structural confusion between magnetite and maghemite (γ-Fe2O3), and also provide standard data for the number of Fe atoms within Fe3O4 particles of a given size, whose use is not limited to cases of magnetite synthesized in the cores of recombinant human ferritin.

Metal Core-Shell Nanoparticle Supercrystals: From Photoactivation of Hydrogen Evolution to Photocorrosion.

Gas nanobubbles are directly linked to many important chemical reactions. While they can be detrimental to operational devices, they also reflect the local activity at the nanoscale. Here, supercrystals made of highly monodisperse Ag@Pt core-shell nanoparticles are first grown onto a solid support and fully characterized by electron microscopies and X-ray scattering. Supercrystals are then used as a plasmonic photocatalytic platform for triggering the hydrogen evolution reaction. The catalytic activity is measured operando at the single supercrystal level by high-resolution optical microscopy, which allows gas nanobubble nucleation to be probed at the early stage with high temporal resolution and the amount of gas molecules trapped inside them to be quantified. Finally, a correlative microscopy approach and high-resolution electron energy loss spectroscopy help to decipher the mechanisms at the origin of the local degradation of the supercrystals during catalysis, namely nanoscale erosion and corrosion.

Advancements in Functionally Graded Polyether Ether Ketone Components: Design, Manufacturing, and Characterisation Using a Modified 3D Printer.

Functionally Graded Materials represent the next generation of engineering design for metal and plastic components. In this research, a specifically modified and optimised 3D printer was used to manufacture functionally graded polyether ether ketone components. This paper details the design and manufacturing methodologies used in the development of a polyether ether ketone printer capable of producing functionally graded materials through the manipulation of microstructure. The interaction of individually deposited beads of material during the printing process was investigated using scanning electron microscopy, to observe and quantify the porosity levels and interlayer bonding strength, which affects the quality of the final parts. Specimens were produced under varying process conditions and tested to characterise the influence of the process conditions on the resulting material properties. The specimens printed at high enclosure temperatures exhibited greater strength than parts printed without the active addition of heat, due to improved bond formation between individual layers of the print and a large degree of crystallinity through maintenance at these elevated temperatures.

Design and Modification of a Material Extrusion 3D Printer to Manufacture Functional Gradient PEEK Components.

In recent years, the creative use of polymers has been expanded as the range of achievable material properties and options for manufacturing and post-processing continually grows. The main goal of this research was to design and develop a fully-functioning material extrusion additive manufacturing device with the capability to produce functionally graded high-temperature thermoplastic PEEK (polyether ether ketone) materials through the manipulation of microstructure during manufacturing. Five different strategies to control the chamber temperature and crystallinity were investigated, and concepts of thermal control were introduced to govern the crystallisation and cooling mechanics during the extrusion process. The interaction of individually deposited beads of material during the printing process was investigated using scanning electron microscopy to observe and quantify the porosity levels and interlayer bonding strength, which affect the quality of the final part. Functional testing of the printed parts was carried out to identify crystallinity, boundary layer adhesion, and mechanical behaviour. Furnace cooling and annealing were found to be the most effective methods, resulting in the highest crystallinity of the part. Finally, a functionally graded material cylindrical part was printed successfully, incorporating both low and high crystalline regions.

Event-based hyperspectral EELS: towards nanosecond temporal resolution.

The acquisition of a hyperspectral image is nowadays a standard technique used in the scanning transmission electron microscope. It relates the spatial position of the electron probe to the spectral data associated with it. In the case of electron energy loss spectroscopy (EELS), frame-based hyperspectral acquisition is much slower than the achievable rastering time of the scan unit (SU), which sometimes leads to undesirable effects in the sample, such as electron irradiation damage, that goes unperceived during frame acquisition. In this work, we have developed an event-based hyperspectral EELS by using a Timepix3 application-specific integrated circuit detector with two supplementary time-to-digital (TDC) lines embedded. In such a system, electron events are characterized by their positional and temporal coordinates, but TDC events only by temporal ones. By sending reference signals from the SU to the TDC line, it is possible to reconstruct the entire spectral image with SU-limited scanning pixel dwell time and thus acquire, with no additional cost, a hyperspectral image at the same rate as that of a single channel detector, such as annular dark-field. To exemplify the possibilities behind event-based hyperspectral EELS, we have studied the decomposition of calcite (CaCO3) into calcium oxide (CaO) and carbon dioxide (CO2) under the electron beam irradiation.

Myocardial edema imaging in acute coronary syndromes.

Acute coronary syndromes (ACS) continue to be the most common morbid condition of industrialized nations. The advent of and technical improvements in revascularization and medical therapy have led to a steady decline in mortality rates. However, many patients who suffer unstable angina or myocardial infarction require further testing and risk stratification to guide therapeutic selection and prognosis assignment. Myocardial edema imaging with cardiac magnetic resonance (CMR) affords the ability to define the amount of myocardium at risk, refine estimates of prognosis and provide guidance for therapies with excellent sensitivity compared with standard clinical markers. This review will discuss the rationale for edema imaging, how it is performed using CMR, and potential clinical applications.

How can the nanocrystallinity of 7 nm spherical Co nanoparticles dispersed in solution be improved?

We report a solution-phase annealing of spherical Co nanocrystals synthesized in reverse micelles and coated with dodecanoic acid. The deposition of a drop of solution on a transmission electron microscope grid shows that a progressive increase in the temperature to 316 °C results in the progressive crystallographic transition from a polycrystalline and probably face-centered cubic Co phase to the single-crystalline hexagonal close-packed (hcp) Co phase. These nanocrystals are highly stable against oxidation and coalescence. We stress that, to our knowledge, this constitutes the first example in the literature of pure hcp-Co spherical single crystals dispersed in solution. These nanocrystals can be freely manipulated and, due to their low size dispersion, can self-organize on various substrates.

Atomistic surface erosion and thin film growth modelled over realistic time scales.

We present results of atomistic modelling of surface growth and sputtering using a multi-time scale molecular dynamics-on-the-fly kinetic Monte Carlo scheme which allows simulations to be carried out over realistic experimental times. The method uses molecular dynamics to model the fast processes and then calculates the diffusion barriers for the slow processes on-the-fly, without any preconceptions about what transitions might occur. The method is applied to the growth of metal and oxide materials at impact energies typical for both vapour deposition and magnetron sputtering. The method can be used to explain growth processes, such as the filling of vacancies and the formation of stacking faults. By tuning the variable experimental parameters on the computer, a parameter set for optimum crystalline growth can be determined. The method can also be used to model sputtering where the particle interactions with the surface occur at a higher energy. It is shown how a steady state can arise in which interstitial clusters are continuously being formed below the surface during an atom impact event which also recombine or diffuse to the surface between impact events. For fcc metals the near surface region remains basically crystalline during the erosion process with a pitted topography which soon attains a steady state roughness.

Inert gas bubble formation in magnetron sputtered thin-film CdTe solar cells.

Cadmium telluride (CdTe) solar cells are deposited in current production using evaporation-based tech- niques. Fabricating CdTe solar cells using magnetron sputtering would have the advantage of being more cost-efficient. Here, we show that such deposition results in the incorporation of the magnetron working gas Ar, within the films. Post deposition processing with CdCl2 improves cell efficiency and during which stacking faults are removed. The Ar then accumulates into clusters leading to the creation of voids and blisters on the surface. Using molecular dynamics, the penetration threshold energies are determined for both Ar and Xe, with CdTe in both zinc-blende and wurtzite phases. These calculations show that more Ar than Xe can penetrate into the growing film with most penetration across the (111) surface. The mechanisms and energy barriers for interstitial Ar and Xe diffusion in zinc-blende are determined. Barriers are reduced near existing clusters, increasing the probability of capture-based cluster growth. Barriers in wurtzite are higher with non-Arrhenius behaviour observed. This provides an explanation for the increase in the size of voids observed after stacking fault removal. Blister exfoliation was also modelled, showing the formation of shallow craters with a raised rim.