RESUMEN
It is increasingly widely recognized that ensemble-based approaches are required to achieve reliability, accuracy, and precision in molecular dynamics calculations. The purpose of the present article is to address a frequently raised question: what is the optimal way to perform ensemble simulation to calculate quantities of interest?
Asunto(s)
Simulación de Dinámica Molecular , Reproducibilidad de los ResultadosRESUMEN
Relative binding free energy (RBFE) calculations are widely used to aid the process of drug discovery. TIES, Thermodynamic Integration with Enhanced Sampling, is a dual-topology approach to RBFE calculations with support for NAMD and OpenMM molecular dynamics engines. The software has been thoroughly validated on publicly available datasets. Here we describe the open source software along with a web portal (https://ccs-ties.org) that enables users to perform such calculations correctly and rapidly.
Asunto(s)
Simulación de Dinámica Molecular , Programas Informáticos , Termodinámica , Descubrimiento de DrogasRESUMEN
Optimization of binding affinities for ligands to their target protein is a primary objective in rational drug discovery. Herein, we report on a collaborative study that evaluates various compounds designed to bind to the SET and MYND domain-containing protein 3 (SMYD3). SMYD3 is a histone methyltransferase and plays an important role in transcriptional regulation in cell proliferation, cell cycle, and human carcinogenesis. Experimental measurements using the scintillation proximity assay show that the distributions of binding free energies from a large number of independent measurements exhibit non-normal properties. We use ESMACS (enhanced sampling of molecular dynamics with approximation of continuum solvent) and TIES (thermodynamic integration with enhanced sampling) protocols to predict the binding free energies and to provide a detailed chemical insight into the nature of ligand-protein binding. Our results show that the 1-trajectory ESMACS protocol works well for the set of ligands studied here. Although one unexplained outlier exists, we obtain excellent statistical ranking across the set of compounds from the ESMACS protocol and good agreement between calculations and experiments for the relative binding free energies from the TIES protocol. ESMACS and TIES are again found to be powerful protocols for the accurate comparison of the binding free energies.
Asunto(s)
Amidas , Isoxazoles , Amidas/farmacología , N-Metiltransferasa de Histona-Lisina/química , Humanos , Ligandos , Unión Proteica , Proteínas/metabolismo , TermodinámicaRESUMEN
Molecular dynamics simulation is now a widespread approach for understanding complex systems on the atomistic scale. It finds applications from physics and chemistry to engineering, life and medical science. In the last decade, the approach has begun to advance from being a computer-based means of rationalizing experimental observations to producing apparently credible predictions for a number of real-world applications within industrial sectors such as advanced materials and drug discovery. However, key aspects concerning the reproducibility of the method have not kept pace with the speed of its uptake in the scientific community. Here, we present a discussion of uncertainty quantification for molecular dynamics simulation designed to endow the method with better error estimates that will enable it to be used to report actionable results. The approach adopted is a standard one in the field of uncertainty quantification, namely using ensemble methods, in which a sufficiently large number of replicas are run concurrently, from which reliable statistics can be extracted. Indeed, because molecular dynamics is intrinsically chaotic, the need to use ensemble methods is fundamental and holds regardless of the duration of the simulations performed. We discuss the approach and illustrate it in a range of applications from materials science to ligand-protein binding free energy estimation. This article is part of the theme issue 'Reliability and reproducibility in computational science: implementing verification, validation and uncertainty quantification in silico'.
RESUMEN
BACKGROUND: Resistance to chemotherapy and molecularly targeted therapies is a major factor in limiting the effectiveness of cancer treatment. In many cases, resistance can be linked to genetic changes in target proteins, either pre-existing or evolutionarily selected during treatment. Key to overcoming this challenge is an understanding of the molecular determinants of drug binding. Using multi-stage pipelines of molecular simulations we can gain insights into the binding free energy and the residence time of a ligand, which can inform both stratified and personal treatment regimes and drug development. To support the scalable, adaptive and automated calculation of the binding free energy on high-performance computing resources, we introduce the High-throughput Binding Affinity Calculator (HTBAC). HTBAC uses a building block approach in order to attain both workflow flexibility and performance. RESULTS: We demonstrate close to perfect weak scaling to hundreds of concurrent multi-stage binding affinity calculation pipelines. This permits a rapid time-to-solution that is essentially invariant of the calculation protocol, size of candidate ligands and number of ensemble simulations. CONCLUSIONS: As such, HTBAC advances the state of the art of binding affinity calculations and protocols. HTBAC provides the platform to enable scientists to study a wide range of cancer drugs and candidate ligands in order to support personalized clinical decision making based on genome sequencing and drug discovery.
Asunto(s)
Ensayos Analíticos de Alto Rendimiento/métodos , Unión Proteica/fisiología , HumanosRESUMEN
Optimization of ligand binding affinity to the target protein of interest is a primary objective in small-molecule drug discovery. Until now, the prediction of binding affinities by computational methods has not been widely applied in the drug discovery process, mainly because of its lack of accuracy and reproducibility as well as the long turnaround times required to obtain results. Herein we report on a collaborative study that compares tropomyosin receptor kinase A (TrkA) binding affinity predictions using two recently formulated fast computational approaches, namely, Enhanced Sampling of Molecular dynamics with Approximation of Continuum Solvent (ESMACS) and Thermodynamic Integration with Enhanced Sampling (TIES), to experimentally derived TrkA binding affinities for a set of Pfizer pan-Trk compounds. ESMACS gives precise and reproducible results and is applicable to highly diverse sets of compounds. It also provides detailed chemical insight into the nature of ligand-protein binding. TIES can predict and thus optimize more subtle changes in binding affinities between compounds of similar structure. Individual binding affinities were calculated in a few hours, exhibiting good correlations with the experimental data of 0.79 and 0.88 from the ESMACS and TIES approaches, respectively. The speed, level of accuracy, and precision of the calculations are such that the affinity predictions can be used to rapidly explain the effects of compound modifications on TrkA binding affinity. The methods could therefore be used as tools to guide lead optimization efforts across multiple prospective structurally enabled programs in the drug discovery setting for a wide range of compounds and targets.
Asunto(s)
Diseño de Fármacos , Dolor/tratamiento farmacológico , Inhibidores de Proteínas Quinasas/metabolismo , Inhibidores de Proteínas Quinasas/farmacología , Receptor trkA/antagonistas & inhibidores , Receptor trkA/metabolismo , Simulación del Acoplamiento Molecular , Simulación de Dinámica Molecular , Dolor/enzimología , Unión Proteica , Inhibidores de Proteínas Quinasas/uso terapéutico , Receptor trkA/química , TermodinámicaRESUMEN
The purpose of statistical mechanics is to provide a route to the calculation of macroscopic properties of matter from their constituent microscopic components. It is well known that the macrostates emerge as ensemble averages of microstates. However, this is more often stated than implemented in computer simulation studies. Here we consider foundational aspects of statistical mechanics which are overlooked in most textbooks and research articles that purport to compute macroscopic behaviour from microscopic descriptions based on classical mechanics and show how due attention to these issues leads in directions which have not been widely appreciated in the field of molecular dynamics simulation.
RESUMEN
A key step in the cyclooxygenase reaction cycle of cyclooxygenase 1 (COX-1) is abstraction of the pro-S hydrogen atom of the arachidonic acid by a radical that is formed at the protein residue Tyr-385. Here we investigate this reaction step by a quantum-mechanics/molecular-mechanics approach in combination with molecular-dynamics simulations. The simulations identify the hydrogen abstraction angle as a crucial geometric determinant of the reaction, thus revealing the importance of the cyclooxygenase active site for calculating the potential energy surface of the reaction.
Asunto(s)
Ciclooxigenasa 1/química , Simulación de Dinámica Molecular , Secuencia de Aminoácidos , Animales , Ácido Araquidónico/química , Humanos , Hidrógeno/química , Mecánica , Datos de Secuencia Molecular , Conformación Proteica , Teoría Cuántica , Tirosina/químicaRESUMEN
Alchemical relative binding free energy calculations have recently found important applications in drug optimization. A series of congeneric compounds are generated from a preidentified lead compound, and their relative binding affinities to a protein are assessed in order to optimize candidate drugs. While methods based on equilibrium thermodynamics have been extensively studied, an approach based on nonequilibrium methods has recently been reported together with claims of its superiority. However, these claims pay insufficient attention to the basis and reliability of both methods. Here we report a comparative study of the two approaches across a large data set, comprising more than 500 ligand transformations spanning in excess of 300 ligands binding to a set of 14 diverse protein targets. Ensemble methods are essential to quantify the uncertainty in these calculations, not only for the reasons already established in the equilibrium approach but also to ensure that the nonequilibrium calculations reside within their domain of validity. If and only if ensemble methods are applied, we find that the nonequilibrium method can achieve accuracy and precision comparable to those of the equilibrium approach. Compared to the equilibrium method, the nonequilibrium approach can reduce computational costs but introduces higher computational complexity and longer wall clock times. There are, however, cases where the standard length of a nonequilibrium transition is not sufficient, necessitating a complete rerun of the entire set of transitions. This significantly increases the computational cost and proves to be highly inconvenient during large-scale applications. Our findings provide a key set of recommendations that should be adopted for the reliable implementation of nonequilibrium approaches to relative binding free energy calculations in ligand-protein systems.
Asunto(s)
Simulación de Dinámica Molecular , Proteínas , Ligandos , Reproducibilidad de los Resultados , Entropía , Proteínas/química , Termodinámica , Unión ProteicaRESUMEN
Janus kinase 2 (JAK2) is a protein tyrosine kinase implicated in signaling by specific members of the cytokine receptor family. Although it has been established that the JAK2 tyrosine kinase is negatively regulated by the JAK homology 2 (JH2) pseudokinase domain, the underlying mechanism of JH2 mediated regulation remains elusive. To elucidate the regulation of JAK2 kinase, we have built a structural model for the kinase and pseudokinase domains of JAK2. An asymmetric dimer is proposed, in which the kinase domain JH1 occupies a position where it could not be activated. We investigate the dynamic and energetic properties of the dimer by molecular dynamics simulation. JAK2 activation requires the two domains to be dissociated and rearranged in a form such that the JH1 kinase domain can adopt an active conformation. The significance of the above mechanism is emphasized by the finding that the activating V617F mutation destabilizes JH1-JH2 association in the proposed asymmetric dimer. Thus abrogation of the domain-domain interaction seems to be a possible first step for the structural rearrangement of the two domains, resulting in constitutive activation of JAK2 by the V617F mutation.
Asunto(s)
Adenosina Trifosfato/química , Receptores ErbB/química , Janus Quinasa 2/química , Simulación de Dinámica Molecular , Activación Enzimática , Humanos , Janus Quinasa 2/genética , Cinética , Mutación , Multimerización de Proteína , Estructura Terciaria de Proteína , Homología Estructural de Proteína , TermodinámicaRESUMEN
The binding free energy between a ligand and its target protein is an essential quantity to know at all stages of the drug discovery pipeline. Assessing this value computationally can offer insight into where efforts should be focused in the pursuit of effective therapeutics to treat a myriad of diseases. In this work, we examine the computation of alchemical relative binding free energies with an eye for assessing reproducibility across popular molecular dynamics packages and free energy estimators. The focus of this work is on 54 ligand transformations from a diverse set of protein targets: MCL1, PTP1B, TYK2, CDK2, and thrombin. These targets are studied with three popular molecular dynamics packages: OpenMM, NAMD2, and NAMD3 alpha. Trajectories collected with these packages are used to compare relative binding free energies calculated with thermodynamic integration and free energy perturbation methods. The resulting binding free energies show good agreement between molecular dynamics packages with an average mean unsigned error between them of 0.50 kcal/mol. The correlation between packages is very good, with the lowest Spearman's, Pearson's and Kendall's tau correlation coefficients being 0.92, 0.91, and 0.76, respectively. Agreement between thermodynamic integration and free energy perturbation is shown to be very good when using ensemble averaging.
Asunto(s)
Simulación de Dinámica Molecular , Entropía , Ligandos , Unión Proteica , Reproducibilidad de los Resultados , TermodinámicaRESUMEN
Although researchers have been working tirelessly since the COVID-19 outbreak, so far only three drugs - remdesivir, ronapreve and molnupiravir - have been approved for use in some countries which directly target the SARS-CoV-2 virus. Given the slow pace and substantial costs of new drug discovery and development, together with the urgency of the matter, repurposing of existing drugs for the ongoing disease is an attractive proposition. In a recent study, a high-throughput X-ray crystallographic screen was performed for a selection of drugs which have been approved or are in clinical trials. Thirty-seven compounds have been identified from drug libraries all of which bind to the SARS-CoV-2 main protease (3CLpro). In the current study, we use molecular dynamics simulation and an ensemble-based free energy approach, namely, enhanced sampling of molecular dynamics with approximation of continuum solvent (ESMACS), to investigate a subset of the aforementioned compounds. The drugs studied here are highly diverse, interacting with different binding sites and/or subsites of 3CLpro. The predicted free energies are compared with experimental results wherever they are available and they are found to be in excellent agreement. Our study also provides detailed energetic insights into the nature of the associated drug-protein binding, in turn shedding light on the design and discovery of potential drugs.
RESUMEN
Optimization of binding affinities for compounds to their target protein is a primary objective in drug discovery. Herein we report on a collaborative study that evaluates a set of compounds binding to ROS1 kinase. We use ESMACS (enhanced sampling of molecular dynamics with approximation of continuum solvent) and TIES (thermodynamic integration with enhanced sampling) protocols to rank the binding free energies. The predicted binding free energies from ESMACS simulations show good correlations with experimental data for subsets of the compounds. Consistent binding free energy differences are generated for TIES and ESMACS. Although an unexplained overestimation exists, we obtain excellent statistical rankings across the set of compounds from the TIES protocol, with a Pearson correlation coefficient of 0.90 between calculated and experimental activities.
Asunto(s)
Proteínas Tirosina Quinasas , Proteínas Proto-Oncogénicas , Simulación de Dinámica Molecular , Unión Proteica , TermodinámicaRESUMEN
The epidermal growth factor receptor (EGFR) is a major target for drugs in treating lung carcinoma as it promotes cell growth and tumor progression. Structural studies have demonstrated that EGFR exists in an equilibrium between catalytically active and inactive forms, and dramatic conformational transitions occur during its activation. It is known that EGFR mutations promote such conformational changes that affect its activation and drug efficacy. The most common point mutation in lung cancer patients is a leucine to arginine substitution at amino acid 834 (L834R). In a recent article, we have studied changes in drug binding affinities due to cancer mutations of EGFR using ensemble molecular dynamics (MD) simulations. Here, we address an enhanced activation mechanism thought to be associated with this mutation. Using extended timescale MD simulations, the structural and energetic properties are studied for both active and inactive conformations of EGFR. The thermodynamic stabilities of these two conformations are characterized by free energy landscapes estimated from molecular mechanics/Poisson-Boltzmann solvent area calculations. Our study reveals that the L834R mutation introduces conformational changes in both states, adjusting the relative stabilities of active and inactive conformations and hence the activation of the EGFR kinase.
Asunto(s)
Receptores ErbB/química , Receptores ErbB/genética , Neoplasias Pulmonares/enzimología , Neoplasias Pulmonares/genética , Simulación de Dinámica Molecular , Activación Enzimática , Humanos , Mutación , Mutación Puntual , Conformación Proteica , TermodinámicaRESUMEN
Classical molecular dynamics is a computer simulation technique that is in widespread use across many areas of science, from physics and chemistry to materials, biology, and medicine. The method continues to attract criticism due its oft-reported lack of reproducibility which is in part due to a failure to submit it to reliable uncertainty quantification (UQ). Here we show that the uncertainty arises from a combination of (i) the input parameters and (ii) the intrinsic stochasticity of the method controlled by the random seeds. To illustrate the situation, we make a systematic UQ analysis of a widely used molecular dynamics code (NAMD), applied to estimate binding free energy of a ligand-bound to a protein. In particular, we replace the usually fixed input parameters with random variables, systematically distributed about their mean values, and study the resulting distribution of the simulation output. We also perform a sensitivity analysis, which reveals that, out of a total of 175 parameters, just six dominate the variance in the code output. Furthermore, we show that binding energy calculations dampen the input uncertainty, in the sense that the variation around the mean output free energy is less than the variation around the mean of the assumed input distributions, if the output is ensemble-averaged over the random seeds. Without such ensemble averaging, the predicted free energy is five times more uncertain. The distribution of the predicted properties is thus strongly dependent upon the random seed. Owing to this substantial uncertainty, robust statistical measures of uncertainty in molecular dynamics simulation require the use of ensembles in all contexts.
RESUMEN
The TIES (Thermodynamic Integration with Enhanced Sampling) protocol is a formally exact alchemical approach in computational chemistry to the calculation of relative binding free energies. The validity of TIES relies on the correctness of matching atoms across compared pairs of ligands, laying the foundation for the transformation along an alchemical pathway. We implement a flexible topology superimposition algorithm which uses an exhaustive joint-traversal for computing the largest common component(s). The algorithm is employed to enable matching and morphing of partial rings in the TIES protocol along with a validation study using 55 transformations and five different proteins from our previous work. We find that TIES 20 with the RESP charge system, using the new superimposition algorithm, reproduces the previous results with mean unsigned error of 0.75 kcal/mol with respect to the experimental data. Enabling the morphing of partial rings decreases the size of the alchemical region in the dual-topology transformations resulting in a significant improvement in the prediction precision. We find that increasing the ensemble size from 5 to 20 replicas per λ window only has a minimal impact on the accuracy. However, the non-normal nature of the relative free energy distributions underscores the importance of ensemble simulation. We further compare the results with the AM1-BCC charge system and show that it improves agreement with the experimental data by slightly over 10%. This improvement is partly due to AM1-BCC affecting only the charges of the atoms local to the mutation, which translates to even fewer morphed atoms, consequently reducing issues with sampling and therefore ensemble averaging. TIES 20, in conjunction with the enablement of ring morphing, reduces the size of the alchemical region and significantly improves the precision of the predicted free energies.
RESUMEN
The advent of personalised medicine promises a deeper understanding of mechanisms and therefore therapies. However, the connection between genomic sequences and clinical treatments is often unclear. We studied 50 breast cancer patients belonging to a population-cohort in the state of Qatar. From Sanger sequencing, we identified several new deleterious mutations in the estrogen receptor 1 gene (ESR1). The effect of these mutations on drug treatment in the protein target encoded by ESR1, namely the estrogen receptor, was achieved via rapid and accurate protein-ligand binding affinity interaction studies which were performed for the selected drugs and the natural ligand estrogen. Four nonsynonymous mutations in the ligand-binding domain were subjected to molecular dynamics simulation using absolute and relative binding free energy methods, leading to the ranking of the efficacy of six selected drugs for patients with the mutations. Our study shows that a personalised clinical decision system can be created by integrating an individual patient's genomic data at the molecular level within a computational pipeline which ranks the efficacy of binding of particular drugs to variant proteins.
Asunto(s)
Antineoplásicos Hormonales/farmacología , Neoplasias de la Mama , Receptor alfa de Estrógeno/genética , Mutación , Proteínas de Neoplasias/genética , Medicina de Precisión , Neoplasias de la Mama/tratamiento farmacológico , Neoplasias de la Mama/genética , Femenino , HumanosRESUMEN
The race to meet the challenges of the global pandemic has served as a reminder that the existing drug discovery process is expensive, inefficient and slow. There is a major bottleneck screening the vast number of potential small molecules to shortlist lead compounds for antiviral drug development. New opportunities to accelerate drug discovery lie at the interface between machine learning methods, in this case, developed for linear accelerators, and physics-based methods. The two in silico methods, each have their own advantages and limitations which, interestingly, complement each other. Here, we present an innovative infrastructural development that combines both approaches to accelerate drug discovery. The scale of the potential resulting workflow is such that it is dependent on supercomputing to achieve extremely high throughput. We have demonstrated the viability of this workflow for the study of inhibitors for four COVID-19 target proteins and our ability to perform the required large-scale calculations to identify lead antiviral compounds through repurposing on a variety of supercomputers.
RESUMEN
A central quantity of interest in molecular biology and medicine is the free energy of binding of a molecule to a target biomacromolecule. Until recently, the accurate prediction of binding affinity had been widely regarded as out of reach of theoretical methods owing to the lack of reproducibility of the available methods, not to mention their complexity, computational cost and time-consuming procedures. The lack of reproducibility stems primarily from the chaotic nature of classical molecular dynamics (MD) and the associated extreme sensitivity of trajectories to their initial conditions. Here, we review computational approaches for both relative and absolute binding free energy calculations, and illustrate their application to a diverse set of ligands bound to a range of proteins with immediate relevance in a number of medical domains. We focus on ensemble-based methods which are essential in order to compute statistically robust results, including two we have recently developed, namely thermodynamic integration with enhanced sampling and enhanced sampling of MD with an approximation of continuum solvent. Together, these form a set of rapid, accurate, precise and reproducible free energy methods. They can be used in real-world problems such as hit-to-lead and lead optimization stages in drug discovery, and in personalized medicine. These applications show that individual binding affinities equipped with uncertainty quantification may be computed in a few hours on a massive scale given access to suitable high-end computing resources and workflow automation. A high level of accuracy can be achieved using these approaches.
RESUMEN
A systematic and statistically robust protocol is applied for the evaluation of free energy calculations with and without replica-exchange. The protocol is based on ensemble averaging to generate accurate assessments of the uncertainties in the predictions. Comparison is made between FEP+ and TIES-free energy perturbation and thermodynamic integration with enhanced sampling-the latter with and without the so-called "enhanced sampling" based on replica-exchange protocols. Standard TIES performs best for a reference set of targets and compounds; no benefits accrue from replica-exchange methods. Evaluation of FEP+ and TIES with REST-replica-exchange with solute tempering-reveals a systematic and significant underestimation of free energy differences in FEP+, which becomes increasingly large for long duration simulations, is confirmed by extensive analysis of previous publications, and raises a number of questions pertaining to the accuracy of the predictions with the REST technique not hitherto discussed.