RESUMEN
Exploiting advanced amphiphilic solid catalysts is crucial to the development of Pickering emulsion catalysis. Herein, covalent organic framework (COF) nanoparticles constructed with highly hydrophobic monomers as linkers were found to show superior amphiphilicity and they were then developed as a new class of solid emulsifiers for Pickering emulsion catalysis. Employing amphiphilic COFs as solid emulsifiers, Pickering emulsions with controllable emulsion type and droplet sizes were obtained. COF materials have also been demonstrated to serve as porous surface coatings to replace traditional surface modifications for stabilizing Pickering emulsions. After implanting Pd nanoparticles into amphiphilic COFs, the obtained catalyst displayed a 3.9â times higher catalytic efficiency than traditional amphiphilic solid catalysts with surface modifications in the biphasic oxidation reaction of alcohols. Such an enhanced activity was resulted from the high surface area and regular porous structure of COFs. More importantly, because of their tunable pore diameters, Pickering emulsion catalysis with remarkable size selectivity was achieved. This work is the first example that COFs were applied in Pickering emulsion catalysis, providing a platform for exploring new frontiers of Pickering emulsion catalysis.
RESUMEN
Morphological control of covalent organic frameworks (COFs) is particularly interesting to boost their applications; however, it remains a grand challenge to prepare hollow structured COFs (HCOFs) with high crystallinity and uniform morphology. Herein, we report a versatile and efficient strategy of amorphous-to-crystalline transformation for the general and controllable fabrication of highly crystalline HCOFs. These HCOFs exhibited ultrahigh surface areas, radially oriented nanopore channels, quite uniform morphologies, and tunable particle sizes. Mechanistic studies revealed that H2O, acetic acid, and solvent played a crucial role in manipulating the hollowing process and crystallization process by regulating the dynamic imine exchange reaction. Our approach was demonstrated to be applicable to various amines and aldehydes, producing up to 10 kinds of HCOFs. Importantly, based on this methodology, we even constructed a library of unprecedented HCOFs including HCOFs with different pore structures, bowl-like HCOFs, cross-wrinkled COF nanocapsules, grain-assembled HCOFs, and hydrangea-like HCOFs. This strategy was also successfully applied to the fabrication of COF-based yolk-shell nanostructures with various functional interior cores. Furthermore, catalytically active metal nanoparticles were implanted into the hollow cavities of HCOFs with tunable pore diameters, forming attractive size-selective nanoreactors. The obtained metal@HCOFs catalysts showed enhanced catalytic activity and outstanding size-selectivity in hydrogenation of nitroarenes. This work highlights the significance of nucleation-growth kinetics of COFs in tuning their morphologies, structures, and applications.
RESUMEN
Lithium-sulfur batteries, owing to the multi-electron participation in the redox reaction, possess enormous energy density, which has aroused much attention. Nevertheless, the detrimental shuttle effect, volume expansion, and electrical insulation of sulfur, have hindered their application. To improve the cyclability, a functional host, consisting of Co nanoparticles and N-doped hollow graphitized carbon (Co-NHGC) material, is elaborated, which has the advantages of: 1)â the graphitized carbon material working as an electronic matrix to improve the utilization rate of sulfur; 2)â the hollow structure relieving the stress change caused by volume expansion; 3)â the rich active sites catalyze the electrochemical reaction of sulfur and entrap polysulfides. These advantages significantly improve the performance of the lithium-sulfur batteries. Accordingly, the S@Co-NHGC cathode exhibits excellent initial specific capacity, high coulombic efficiency, and excellent rate performance. This work utilizes a novel method of dopamine in situ etching of a metal-organic framework to synthetize the Co-NHGC host of sulfur, which will hopefully provide inspiration for other energy materials.
RESUMEN
Production of hydrogen from photocatalytic water splitting holds promise as an alternative energy source with superiority of cleanliness, environment friendliness, low price, and sustainability. Perfectly constructing the noble-metal-free and stable hybrid structure photocatalyst is quite essential; herein, for the first time the authors aim to use cobalt phosphide as the cocatalyst on titanium oxide to form a novel hybrid structure to enhance the utilization of the photoexcited electrons in redox reactions for improved photocatalytic H2 evolution activity. Thus, the achieved significantly increased photocatalytic H2 -evolution rate on the optimized CoP/TiO2 (8350 µmol h-1 g-1 ) is 11 times higher than that of the pristine TiO2 . Moreover, this work is expected to spur more insight into synthesizing such novel photofunctional systems, achieving high photocatalytic H2 evolution activity and sufficient stability for solar-to-chemical conversion and utilization.
RESUMEN
The energy storage capacity of porous carbon materials is closely tied to their surface structure and chemical properties. However, developing an innovative and straightforward approach to synthesize yolk-shell carbon spheres (YCs) remains a great challenge till date. Herein, we prepared a series of porous nitrogen-doped yolk-shell carbon spheres (NYCs) via a "pyrolysis-capture" method. This method involves coating the resorcinol-formaldehyde (RF) resin sphere with a layer of compact silica shell induced by 2-methylimidazole (ME) catalysis to produce a confined nano-space. Based on the confined effect of compact silica shell, volatile gases emitted from the RF resin and ME during pyrolysis can not only diffuse into the pores of the RF resin but can also be captured to form an outer carbon shell. This results in the tunable structures of NYCs materials. As the pyrolysis temperature rises, the shell thickness of NYCs reduces, the pore size expands, the roughness increases, and the N/O content of surface elements is enhanced. Notably, as an electrode material used forsupercapacitors,the optimized NYCs-800 exhibits excellent performance with a capacitance of 301.2F g-1 at the current density of 1 A/g and outstanding cycling life stability of 96.1% after 10,000 cycles. These results signify that controlling the surface structure and chemical properties of NYCs materials is an effective approach for constructing advanced energy storage materials.
RESUMEN
In this work, we have proposed a strategy to fabricate double-shell nanotubes as amphiphilic photoactive nanoreactors (HTTBPC) through the ordered hybridization of mesoporous organosilicon (PMO) and titanium dioxide (TiO2) nanotubes. Unlike the previous rough composite, the heterogeneous structure established between cobalt-porphyrin functionalized PMO and conventional TiO2 has a staggered matching band gap, which makes it have excellent light harvesting and high carrier separation ability. This is still unexplored. Interestingly, the prepared photocatalysts exhibited superior activity (99%) and benzaldehyde selectivity (94%) in the oxidation of styrene in water at room temperature, which was 3.8 and 2.8 times higher than that of TiO2 nanotubes and PMO functionalized with cobalt porphyrin, respectively. It was demonstrated that the strong interaction between cobalt porphyrin PMO and TiO2 improved the separation of photogenerated carriers and the amphiphilic properties of mesoporous organosilica boosted the adsorption of substrate molecules in water, contributing to the significantly enhanced photocatalytic activity. This work provides a design of high-performance photocatalysts for alkene oxidation under green conditions.
RESUMEN
Crystalline admixtures (CAs) are new materials for promoting self-healing in concrete materials to repair concrete cracks. They have been applied to tunnel, reservoir dam, road, and bridge projects. The fundamental research and development of CAs are needed concerning their practical engineering applications. This paper reviews the current research progress of commercial CAs, including self-made CA healing cracks; the composition of CA; healing reaction mechanism; the composition of healing products; distribution characteristics of healing products; the influence of service environment and crack characteristics on the healing performance of CA; and coupling healing performance of CA with fiber, expansive agent, and superabsorbent polymers. The current research findings are summarized, and future research recommendations are provided to promote the development of high-performance cement matrix composites.
RESUMEN
The focus of designing and synthesizing composite catalysts with high photocatalytic efficiency is the regulation of nanostructures and optimization of heterojunctions. By increasing the contact area between the catalysts, additional reaction sites can be established and charge carriers can be transferred and reacted faster. Here, two-dimensional (2D) Mo2C is prepared via a novel approach by carbonizing precursors intercalated by low-boiling solvents, and a composite catalyst Mo2C/graphitic carbon nitride (g-C3N4) with 2D to 2D structure optimization was synthesized through the self-assembly of 2D Mo2C and 2D g-C3N4. The hydrogen production rate of the photocatalyst at the optimal ratio is 675.27 µmol g-1 h-1, which further exceeds 2D g-C3N4. It is 5.1 times that of the 7 wt % B/2D Mo2C/g-C3N4 photocatalyst and also 3.5 times that of 0.5 wt % Pt/g-C3N4. The enhanced photocatalytic activity is attributed to the fact that Mo2C as a cocatalyst can rapidly transfer the photogenerated electrons of g-C3N4 to the surface of Mo2C, and the 2D to 2D structure can provide abundant reaction sites for photogenerated electrons to prevent their recombination with holes. This study provides new ideas and techniques for the development of 2D platinum-like cocatalysts and the optimization of nanojunctions.
RESUMEN
Pickering emulsifiers are significant for organic reactions in an aqueous medium because they have the ability of emulsifying water-oil biphasic systems. For this reason, 2,5-bis[(E)-2-(triethoxysilyl)vinyl]pyridine [BTOSVP] containing a pyridine bridging group was selected as a precursor to prepare a novel salt of organosilicon framework (SOF), an amphiphilic mesoporous pyridine hydrobromide nanosphere. We first synthesized a mesoporous organosilicon framework made up of organic groups containing vinyl groups, pyridine groups, and so forth. Then, hydrobromic acid was added to protonate the pyridine groups in the mesoporous organosilicon framework. Eventually, pyridine hydrobromide salt was formed on the surfaces of channels, and the SOF was successfully prepared for the first time. Pyridine hydrobromide salt can be ionized in water into protonated pyridine cations located on the SOF surfaces and free Br-anions swimming around the protonated pyridine cations because of the electrostatic interaction. In the water-oil biphasic systems, hydrophilicity of SOF originates from the protonated pyridine cations and the lipophilicity of SOF comes from organic groups in the framework; thus, this new kind of SOF can be used as a new generation of solid Pickering emulsifiers. Most importantly, the mesoporous SOF nanosphere can also be used as a catalyst for significantly improved dibromination of olefins in an aqueous medium.
RESUMEN
Carbon-metal composites are promising multifunctional electrocatalysts, but it is still challenging to prepare carbon-metal composites with tunable structure and strong metal-carbon interactions. Here, we present a unique gas-foaming assembly strategy to prepare cytosine-Co chelate derived Co and N codoped carbon nanotube (Co-NCNT). The structure for Co-NCNTs could be easily controlled by regulating cytosine-Co coordination or the carbonization temperature. The optimal Co-NCNT possesses homogeneous distributed NCNTs (10 nm), CoOx (5 nm) and CoNx moieties to synergistically boost electrochemical processes, and offer mesoporous nanosheet architecture to guarantee fast mass migrate and electron transfer. As a result, Co-NCNT shows remarkable ORR performance (onset potential of 0.93 V in 0.1 M KOH electrolyte) along with significant OER and HER activity. More important, it was found that CoNx moieties are responsible for the remarkable electrocatalytic activity in Co-NCNTs, because CoNx could alter active center, enhance metal-carbon synergy, decrease interfacial resistance and reinforce the strength of composites. Therefore, this paper not just demonstrates an advanced multi-functional electrocatalyst, but could also give deep understanding on the designing of multifunctional electrocatalysts.
RESUMEN
Organic reactors in a green solvent (water) is the goal of sustainable development. Green nanoreactors with excellent amphiphilicity and catalytic activity are strongly desired. Herein, a novel amphiphilic nanoreactor Pd@amZSM-5 with ultrasmall size has been successfully synthesized via a simple one-step oil bath method, subjected to the modification-etching-modification strategy and in situ reduction of Pd2+. Ultrasmall Pd@amZSM-5 nanoreactors (60 nm) with hierarchical structures showed outstanding amphiphilicity for forming Pickering emulsions with fine uniform droplets (50 µm). Fine droplets formed short diffusion distances, which can significantly improve the catalytic activity in biphasic reactions. Moroever, the ultrasmall Pd@amZSM-5 nanoreactors demonstrated excellent catalytic activity for the selective oxidation of alcohols in water using air as the oxidant. Alkali was not present in the reaction system. The hydrophilic aminopropyl groups on the surface of the Pd@amZSM-5 nanoreactors not only changed the affinity of the zeolite surface and provided targeting points for Pd nanoparticles but also provided an alkaline environment for the selective oxidation of alcohols. The ultrasmall Pd@amZSM-5 nanoreactors presented excellent universality for aromatic alcohols (with >90% conversion and >90% selectivity) and allylic alcohols (with 100% conversion and 100% selectivity).
RESUMEN
Controlling localization of multiple metal nanoparticles on a single support is at the cutting edge of designing cascade catalysts, but is still a scientific and technological challenge because of the lack of nanostructured materials that can not only host metal nanoparticles in different sub-compartments but also enable efficient molecular transport between different metals. Herein we report a multicompartmentalized mesoporous organosilica with spatially separated sub-compartments that are connected by short nanochannels. Such a unique structure allows co-localization of Ru and Pd nanoparticles in a nanoscale proximal fashion. The so designed cascade catalyst exhibits an order of magnitude activity enhancement in the sequential hydrogenation of nitroarenes to cyclohexylamines compared with its mono/bi-metallic counterparts. Crucially, an interesting phenomenon of neighboring metal-assisted hydrogenation via hydrogen spillover is observed, contributing to the significant enhancement in catalytic efficiency. The multicompartmentalized architectures along with the revealed mechanism of accelerated hydrogenation provide vast opportunity for designing efficient cascade catalysts.
RESUMEN
Carbon nitride has become a focus of photocatalytic materials research in recent years, but the low specific surface area, the bad separation efficiency of photocarriers, poor quantum efficiency, terrible photocatalytic activity hinder the development of carbon nitride in the field of photocatalysis. The preparation of carbon nitride nanosheets is one of the effective methods to improve the photocatalytic efficiency of carbon nitride, but the traditional top-down stripping process is time-consuming, complicated and expensive. Here we report a simple, cheap, non-toxic and environmentally friendly bottom-up method to prepare a curled g-C3N4 nanosheet (NS-C3N4), which is performed at low temperature and normal pressure. In the aqueous solution, melamine and cyanuric acid are copolymerized to form a copolymer. Glycerol is inserted between the molecular layers of the prepolymer by thermal diffusion. Finally, high-quality and high-yield curled g-C3N4 nanosheets (NS-C3N4) are obtained by thermal peeling and polycondensation. The NS-C3N4 has an highly efficient photocatalytic hydrogen production of 4061.8 µmol h-1 g-1, and the hydrogen evolution activity is 37.5 times that of bulk-C3N4 (B-C3N4). The specific surface area of NS-C3N4 is 60.962 m2 g-1. UV-vis absorption spectra, steady-state and time-resolved photoluminescence, and photoelectrochemical tests were used to study its photocatalytic mechanism.
RESUMEN
Atom efficiency, low temperature, low pressure, and a nontoxic hydrogen source as a reducing agent are ideal reaction conditions for the reduction of nitroarenes. In this work, an efficient catalyst comprising hollow nano-mesosilica spheres loaded with Rh nanoparticles supported on nitrogen-doped carbon was developed. Rh nanoparticles were stabilized and uniformly dispersed by nitrogen atoms, and the inner N-doped carbon shell was used to adsorb reaction substrates and improve catalytic activity. The catalyst showed remarkable activity (maximum yield at 1.5â h) and selectivity (100 %) for the reduction of nitrobenzene at lower temperature (80 °C), atmospheric pressure (1â atm), and without base under aqueous conditions. Moreover, the hydrothermal stability of this nanocatalyst was better than other catalysts in boiling water at 100 °C for 48â h and effectively prevented the aggregation and leaching of Rh NPs during the reaction.
RESUMEN
To design high specific surface area and optimize the pore size distribution of materials, we employ a combination of carbonization and KOH activation to prepare activated carbon derived from ground grain hulls. The resulting carbon material at lower temperature (800, BSAC-A-800) exhibits a porous structure with a high specific surface area of 1037.6 m2 g-1 and a pore volume of 0.57 m3 g-1. Due to the synergistic structural characteristics, BSAC-A-800 reveals preferable capacitive performance, showing a specific capacitance as high as 313.3 F g-1 at 0.5 A g-1, good rate performance (above 73%), and particularly stable cycling performance (99.1% capacitance retention after 10 000 cycles at a current density of 10 A g-1). More importantly, the assembled symmetric supercapacitor using a water-in-salt electrolyte (17 m NaClO4) with high discharge specific capacitance (59 F g-1 at 0.5 A g-1), high energy density (47.2 W h kg-1) and high voltage (2.4 V) represents significant progress towards performance comparable to that of commercial salt-in-water electrolyte supercapacitors (with discharge specific capacitance of 50 F g-1, energy densities of â¼28.1 W h kg-1 and voltages of 2.0 V).
RESUMEN
It is strongly desired to design and synthesize amphiphilic nanoreactors with tunable compatibility, which are stable at the biphasic interface in both acidic and alkaline environments. Herein, a novel amphiphilic R1-ZSM-5-R2 nanoreactor with adjustable hydrophilic-lipophilic balance (solid) (HLB(S)) values has been successfully synthesized by hydrophilic/lipophilic asymmetric modification of the surface of hemishell zeolites. The hemishell zeolites obtained by alkali etching have different surfaces for this asymmetric modification. Owing to the unique hemishell structures and asymmetric modification, the R1-ZSM-5-R2 nanoreactors with an optimized type and amount of modified organosilanes show excellent stability and emulsifying properties under extreme environments, which is important for cascade reactions in a biphasic system. The modified amino groups on the surface of the nanoreactors not only enhance the hydrophilicity of the hemishell zeolites and stabilize ultrasmall Pt nanoparticles (1.90 nm) but also used for the catalytic synthesis of trans-cinnamaldehyde. The Pt@R1-ZSM-5-R2 amphiphilic catalysts fabricated through a one-step reduction of Pt nanoparticles present outstanding performances in the biphasic cascade synthesis of cinnamic acid, achieving a very high turnover frequency (TOF) of 978 h-1. The TOF values of the catalysts correspond well to the HLB(S) values of the R1-ZSM-5-R2 nanoreactors.
RESUMEN
We design and prepare a highly active and stable nanoreactor via encapsulating various mesoporous metal nanoparticles with an amphiphilic hollow shell, which presents excellent performance in oxidative coupling reactions in water for efficient production of α,ß-unsaturated ketones.
RESUMEN
Nitrogen and sulfur co-doped carbon-coated Li4 Ti5 O12 (denoted as LTO/NSC) was developed to enhance the electrochemical performance of LTO material. l-Cysteine served as both the carbon source and the heteroatom doping source. The morphology of LTO was tuned by Ti-C bond formation during carbonation process, accompanied by a change in the original orientation growth of the LTO lattice plane. Consequently, LTO transformed from nanosheets to nanoparticles. SEM data proved that the structure of LTO/NSC nanoparticles was more stable than that of LTO nanosheets after hundreds of charge/discharge process. The N,S co-doped carbon layer can moderate particle aggregation and may help to shorten the electron transport length and enhance lithium storage capacity. The structural superiority and the N,S co-doped carbon layer endows LTO/NSC particles with high reversible specific capacity (183â mA h g-1 at 0.1â C), significantly enhanced rate capability (122â mA h g-1 at 10â C) and excellent cycling stability (capacity retention of 96.3 % after 200 cycles) relative to these features of LTO nanosheets. Thus, LTO/NSC is a promising anode material for high-performance lithium ion batteries.
RESUMEN
Nb2O5 as a semiconductor material has attracted significant attention in recent years due to its outstanding advantages. In this article, novel Au@Void@Nb2O5 core-shell nanocomposites have been fabricated through a facile sol-gel method. The construction process of this core-shell nanostructure has been presented in detail. The as-prepared core-shell nanostructure exhibits nanosphere morphology with Nb2O5 acting as the shell and Au nanoparticles acting as the core, which was proved using SEM and TEM. The noble metal Au core protected by the Nb2O5 shell promotes an interfacial charge-transfer process. The core-shell nanocomposites demonstrate excellent visible light absorption, as shown by the UV-Vis diffuse reflectance spectra. The as-prepared photocatalyst Au@Void@Nb2O5-2 calcined at 300 °C exhibits higher photocatalytic efficiency than Au@SiO2@Nb2O5-2-300 °C, Nb2O5 and P25, as evaluated by the degradation of rhodamine B (Rh B) under visible light. In the photodegradation process of the Rh B solution, holes (h+) play a more important role than hydroxyl radicals (ËOH) over the as-prepared photocatalyst, which was analyzed using active species trapping experiments and photoluminescence (PL) spectroscopy. Moreover, the photocatalyst Au@Void@Nb2O5-2 calcined at 300 °C exhibits excellent durability of its photocatalytic activity even after five successive cycles. This contribution gives a new perspective for designing and preparing novel metal-Nb2O5 nanostructure catalysts applied in environmental treatments.
RESUMEN
A novel 3D superstructure containing Fe, N, and S-codoped ultra-thin carbon nanosheets was prepared. The newly developed superstructure possessed a hierarchical porosity and a high dopant content, and served as an efficient noble-metal free ORR electrocatalyst (onset potential 0.95 V vs. RHE).