RESUMEN
Multicore fiber (MCF) has a larger mode-area (LMA) compared to traditional single-core fiber, making it easy to get a mode area of more than 3000 µm2 with an optimized MCF structure. Here, a fine-structured 19-core fiber based on chalcogenide glass was fabricated using a combined method involving extrusion, drilling, and rod-in-tube for the first time. The fiber has a minimum transmission loss of 1.8â dB/m at 6.7 µm. When the bending radius exceeds 6â cm, a low bending loss of about 0.6â dB appears, and the experimental data are in good agreement with the simulation results. In addition, the supermode characteristics of the 19-core fiber are analyzed from both perspectives of simulation and experiment, and these results are perfectly in good agreement. We believe it opens a new way to develop high-power and bend-resisting fiber with such kind of multicore structure.
RESUMEN
High-power laser delivery in the mid-infrared via hollow-core fibers is attractive, but it is too difficult to be fabricated using chalcogenide glasses. Here, we designed a mid-infrared hollow-core anti-resonant chalcogenide fiber (HC-ARCF) with a simplified Kagome cladding micro-structure for the first time. Then, the fiber was firstly fabricated through a precision mechanical drilling and pressured fiber drawing method. Ultra-thin walls of 2µm in the fiber lead to the fewest resonance peaks in the 2-5µm among all reported HC-ARCFs. All the fundamental mode, the second-order mode, tube mode and node mode in the fiber were excited and observed at 1550 nm. The power and spectral properties of the core and cladding of HC-ARCF are studied for the first time. The fiber can deliver high-power of 4.84 W without damage with core-coupling, while the threshold of the node in the cladding is only 3.5 W. A broadening of the output spectrum from 1.96 to 2.41µm due to the high nonlinearity at the node was successfully observed under short-pulse laser pumping at 2µm. The potentials of the fiber used for mid-infrared high-power laser delivery via core, or nonlinear laser generation via node, were thus demonstrated.
RESUMEN
Chalcogenide glass possesses outstanding advantages, such as supercontinuum generation, but its nonlinear applications were limited by large zero-dispersion wavelength (ZDW). Traditional suspended-core fibers can shift the ZDW to near IR with a tiny core size of less than 5 µm but a large evanescent wave loss exists in these fibers. In this paper, we prepared a novel suspended-core fiber (SCF) based on chalcohalide glasses for the first time via the extrusion method, in which the ZDW of the fundamental mode in the fiber with a core size of larger than 30 µm was successfully shifted to 2.6 µm. We also calculated confinement loss (CL) of propagation modes and fundamental mode energy ratio in the fiber. We found that the minimum CL ratio of the high order modes (LP11) to the CL of the fundamental mode is 124, indicating that the single-mode operation condition is satisfied when the wavelength is more than 4.6 µm. The lowest transmission loss is 1.2 dB/m at 6.5 µm. An ultra-broad supercontinuum spectrum, covering from 1.6 to 12 µm was generated in this suspended-core fiber pumped by a 5 µm femtosecond laser. Such a wide SC in the chalcogenide SCF is due to the large core size. All these results demonstrate the potential to use the large core SCF in the application of a mid-IR laser.
RESUMEN
The complete removal of the impurities like Se-H in Se-based chalcogenide glasses has been challenging in the development of highly transparent chalcogenide glass fiber. In this paper, several purification methods, including dynamic distillation, static distillation, and combined distillation method, were adopted with an aim of purifying arsenic selenide glass with ultra-low content of the impurities. The experimental results demonstrated that the Se-H can be completely eliminated in the arsenic selenide glass host and fiber without the introduction of any chloride. We further explored the applications of such low loss and Se-H-free chalcogenide glass fiber in the mid-infrared. It was found that, using such a Se-H free fiber, a flattened supercontinuum spectrum above the -30â dB level from 1.2 to 13 µm was generated from the Se-H free fiber with a 5.5 µm laser pumping. The sensitivity was found to be improved 5.1 times for CO2 gas in the 3 to 6 µm wavelength range.
RESUMEN
We have prepared a well-structured tellurium chalcogenide (ChG) fiber with a specialized double cladding structure by an improved extrusion method, and experimentally demonstrated an ultra-flat mid-infrared (MIR) supercontinuum (SC) generation in such a fiber. The step-index fiber had an optical loss of <1 dB/m in a range from 7.4 to 9.7 µm with a minimum loss of 0.69 dB/m at 7.87 µm. Simulation showed that an all-normal dispersion profile can be realized in this double cladding tellurium fiber. An ultra-flat MIR SC spectrum (~3.2-12.1µm at -10 dB, ~2-14 µm at -30 dB) was generated from a 22-cm long fiber pumped with a femtosecond laser at 5 µm (~150 fs, 1 kHz). Then the degree of coherence was calculated out based on a simulation, showing that a high coherent MIR SC (from 2.9 to 13.1 µm) can be generated in this double-cladding tellurium fiber.
RESUMEN
A novel low-loss selenium-based chalcohalide fiber, with a low zero-dispersion wavelength, was prepared by an innovative preparation process. The composition optimized fiber has a wide transmission range of up to 11.5 µm, a lowest fundamental mode zero-dispersion wavelength of 4.03 µm, and a minimum optical loss of 1.12 dB/m at 6.4 µm, which provides a possibility to replace As2S3 and As2Se3 in a cascade of ZrF4-BaF2-LaF3-AlF3-NaF(ZBLAN)-As2S3-As2Se3 fiber in the practical all-fiberized supercontinuum (SC) source. Meanwhile, the broadest SC spectrum, â¼1.2 to 15.2 µm, was achieved by pumping a 12-cm-long fiber with a femtosecond laser at a deep anomalous-dispersion region. Furthermore, simulations are adopted to interpret the results as well as to demonstrate spectral evolution along the fiber. To the best of our knowledge, this is the broadest SC spectrum reported in any selenium-based chalcogenide fiber.
RESUMEN
A large number of natural and anthropogenic wastes were landfilled, and dissolved organic matter (DOM) were formed during landfill. However, the composition, transformation, and coexistence characteristics of natural and anthropogenic DOM in leachate remain unclear. Fourier transform ion cyclotron resonance mass spectrometry, size exclusion chromatography, gas chromatography coupled with mass spectrometry, and three-dimensional excitation-emission matrix spectrum were employed to clarify comprehensively the abovementioned question. The results showed that natural DOM in young leachate constituted mainly straight-chain organic acids, protein substances, and building blocks of humic substances (BB). Straight-chain organic acids vanished in old leachates, and the concentration of protein substances and BB decreased from 44% to 26% and from 47% to 12%, respectively, while CHON and CHONS were degraded to CHO and CHOS during the process. As to anthropogenic DOM, its types and relative content in leachate increased during landfill, and aromatic acids, terpenes, halogenated organics, indoles, and phenols became the main organic components in old leachate. Compared to natural DOM, anthropogenic DOM was degraded slowly and accumulated in leachate, and some of the natural DOM facilitated the dechlorination of dichlorinated organic compounds. This study demonstrates that landfill led to an increase in humic substances and halogenated organic compounds in old leachate, which was intensified with concentrated leachate recirculation.
RESUMEN
Sanitary landfill is the most prevalent and economic method for municipal solid waste disposal, and the resultant groundwater pollution has become an environmental problem due to leachate leakage. The pollution characteristics in groundwater near landfill sites have been extensively investigated, although the succession characteristics and driving mechanisms of microbial communities in leachate-contaminated groundwater and the sensitive microbial indicators for leachate leakage identification remain poorly studied. Herein, results showed that leachate leakage enhanced the microbial diversity and richness and transferred endemic bacteria from landfills into groundwater, producing an average decrease of 17.73% in the relative abundance of Proteobacteria. The key environmental factor driving the evolution of microbial communities in groundwater due to leachate pollution was organic matter, which can explain 16.13% of the changes in microbial community composition. The |ßNTI| values of the bacterial communities in all six landfills were <2, and the assembly process of microbial communities was primarily dominated using stochastic processes. Leachate pollution changed the assembly mechanism, transforming the community assembly process from an undominated process to a dispersal limitation process. Leachate pollution reduced the efficiency and stability of microbial communities in groundwater, increasing the vulnerability of the stable microbial ecosystems in groundwater. Notably, microbial indicators are more sensitive to leachate leakage and could accurately identify landfills where leachate leakage occurred and other extraneous pollutants. The phylum Proteobacteria and mcrA could act as appropriate indicators for the identification of leachate leakage. These results provide a novel insight into the monitoring, identification of groundwater pollution and the scientific guidance for appropriate remediation strategies for leachate-contaminated groundwater.
Asunto(s)
Agua Subterránea , Microbiota , Eliminación de Residuos , Contaminantes Químicos del Agua , Monitoreo del Ambiente/métodos , Proteobacteria , Eliminación de Residuos/métodos , Residuos Sólidos/análisis , Bacterias , Instalaciones de Eliminación de Residuos , Contaminantes Químicos del Agua/análisisRESUMEN
Dual nitrate stable isotopes combined with end-member mixing models are typically used to identify nitrate sources in fields of geochemistry and environmental science, which helps to quantitively depict the geochemical behaviors of nitrate and accurately control the sources of nitrate pollution in waters. Recently, various models with different computation principles, working efficiency, and operation difficulty have been developed and applied in the source apportionment of nitrate. In this paper, an end-member mixing model tool on Excel™, namely EMMTE, has been written with Visual Basic for Application (VBA) and built into a macro-enabled Excel™ spreadsheet. Monte Carlo simulation and constraint relative deviation between the observed and the predicted values were included in the working algorithm to solve the mass balance equation. After comparison with the internationally recognized Bayesian framework (mixing stable isotope analysis in R, MixSIAR) in different cases (three practical cases and one virtual case), the preliminary results showed that the contribution of various sources to groundwater nitrate calculated by EMMTE was highly consistent with that by MixSIAR and the performance of EMMTE seemed to be as good as that of MixSIAR as indicated by the higher goodness-of-prediction, lower root-mean-square error, and lower relative deviation. Therefore, EMMTE is applicable in the source apportionment of groundwater nitrate, and might also be extended to other water bodies and mixtures. It provides a simple, feasible, and user-friendly for front-line workers without experience with MixSIAR to quantitively source apportionment of nitrate in waters.
RESUMEN
Suicide is a major public health problem affecting US Veterans and the US in general. Many variables (e.g., demographic, clinical, biological, geographic) have been associated with risk for suicide and suicidal behavior, including altitude; however, the exact nature of the relationship between altitude and suicide remains unclear in part due to the fact that previous studies have used either geospatial data or individual-level data, but not both. Prior research has also failed to consider the full range of suicidal thoughts and behaviors, ranging from suicidal ideation to suicide deaths. Accordingly, the objective of the present research was to use both geospatial data (county and zip codes) and individual-level data to comprehensively assess the association between altitude and suicide mortality, suicide attempts, and suicidal ideation among US Veterans between 2000 and 2018. Taken together, our results demonstrate that there is a strong correlation between altitude and suicide rates at all the levels investigated and using different statistical analyses and even after controlling for significant covariates such as percent of age >50yr, percent male, percent white, percent non-Hispanic, median household income, and population density. We show that there is a positive correlation between altitude and suicide attempts especially when controlling by the covariates and a weak correlation between altitude and suicide ideation and the combination of suicide, suicide attempts and suicide ideation.
Asunto(s)
Intento de Suicidio , Veteranos , Altitud , Humanos , Masculino , Factores de Riesgo , Ideación SuicidaRESUMEN
It is well known that, the incorporation of halide will improve the optical properties of chalcogenide glasses with a broad transparent range. Here, we investigated the optical properties and structure of Ge-As-Se-I glasses in order to disclose the role of halogen iodine in the formation of chalcogenide glassy network. It was found that, refractive index, zero dispersion wavelength and glass transition temperature Tg decrease with increasing iodine contents, while the cut-off edge (λvis) in the shorter wavelength blue-shifts apparently, and the whole transmission range is expanded widely. The glasses show good chemical stability against moisture. The zero dispersion wavelength of the glasses can be decreased to 4.32 µm by iodine-doping. The evolution of Raman spectra of the glasses indicates that, there is no obvious peak of iodine in Ge-As-Se-I glasses and the dominated glassy network are still the (GeSe) heteropolar bonds.
RESUMEN
PURPOSE: To evaluate the efficacy and toxicities of concurrent chemoradiotherapy (CCRT) and consolidation chemotherapy in patients with locally advanced squamous cell cervical carcinoma. METHODS AND MATERIALS: Patients with LASCC (FIGO Stage IIB-IIIB) were treated with pelvic external beam radiotherapy (45 Gy for Stage IIB and 50 Gy for Stage III) and high-dose-rate intracavitary brachytherapy (50 Gy for Stage IIB and 35 Gy for Stage III). The cumulative dose at point A was 50 Gy for Stage IIB and 65 Gy for Stage III. Concurrent chemotherapy with paclitaxel (35 mg/m(2)) and nedaplatin (20 mg/m(2)) was given every week for 6 weeks. Consolidation chemotherapy with paclitaxel (135 mg/m(2)) and nedaplatin (60 mg/m(2)) was administered every 3 weeks for 4 cycles. RESULTS: All patients completed CCRT, and 28 of 34 patients completed consolidation chemotherapy. The complete response rate was 88% (95% CI, 73-96%). The most common Grade 3 or higher toxicities were leukopenia/neutropenia (10.9% of the cycles). During a median follow up of 23 months (range, 14-30 months), 5 patients had locoregional failure and 1 patient had distant metastasis. The estimated 2-year progression-free survival and overall survival were 82% (95% CI, 68-95%) and 93% (95% CI, 83-100%), respectively. Grade 3 late complications occurred in 3 patients (9%). CONCLUSIONS: CCRT with paclitaxel and nedaplatin followed by consolidation chemotherapy is well tolerated and effective in patients with locally advanced squamous cell cervical carcinoma. Further randomized trials of comparing this regimen with the standard treatment are worth while.