RESUMEN
Stable reproducibility of mechanoluminescence (ML) is of vital importance for trap-controlled ML materials. Photo/electric excitation is usually needed for ML recovery of trap-controlled materials. In this work, it is demonstrated that thermal treatment can be applied to achieve recovery of ML, which is ascribed to the unique trap level configuration. The Ca6BaP4O17:Eu2+ performing robust trap-controlled ML has been proposed, and the corresponding repetitive ML can be realized by thermal treatment. TL spectra reveal that the thermally induced reproducible ML benefits from the dual defect level electronic structure of Ca6BaP4O17:Eu2+. The ML intensity is dependent on the electrons in shallow traps, and the electron transfer from deep traps to shallow traps induced by thermal treatment leads to repetitive ML.
RESUMEN
We report a Pd-catalyzed ortho-C-H arylation of free anilines with arylboric acids. Under the reaction conditions, a wide range of arylboric acids can couple with free anilines to produce the corresponding o-amino biaryls in moderate to good yields with good functional group tolerance. This reaction can be conducted on the gram scale. The products can be easily further functionalized via transformation of the free amino group. These results indicate the potential synthetic value of this new reaction in organic synthesis.
RESUMEN
It is demonstrated that the incorporation of K+ into CsPb(Br,I)3 perovskite quantum dot glass leads to the simultaneous increases of quantum efficiency and phase stability. The latent mechanism is analyzed via the microstructural and spectroscopic studies. The constructed prototype white-light-emitting diode device yields an ultra-wide color gamut attaining 96% Rec. 2020 standard.
RESUMEN
In this work, hexagonal boron nitride (h-BN) nanocrystals as functional additives in a phosphor-in-glass film are shown to substantially increase the luminous performance driven by a blue laser. Microstructural and spectroscopic studies reveal that h-BN particles distributed over the whole glass matrix build in situ a local heat conductive path which effectively accelerates heat dissipation and so greatly relieves the "thermal run-away effect". The developed composite material with fine thermal manipulation may be a promising phosphor color converter for high-power-density laser-driven lighting.
RESUMEN
For a Si-based all-optical spatial terahertz modulator (STM), an enhanced modulation efficiency under low illumination density would be of great significance to exploit the competence of THz technology in real-world applications. We presented here an implementation of such a device by microtexturing and passivating the Si surface, forming a truncated pyramidal array (TPA). This TPA structure with SiO2 passivating coatings not only decreases light reflectance and expands the active area for THz modulation but also remarkably increases the photogenerated carrier lifetime. These 3-fold benefits render Si-TPA superior to bare-Si with respect to the achievable modulation efficiency, especially at low irradiation power. Furthermore such a Si-TPA device is also more applicable than its counterpart that is only passivated by SiO2 nanocoatings, even though the Si-SiO2 has a slightly increased modulation efficiency. These periodically aligned pyramids resembled as a mesa array significantly suppress the lateral diffusion induced by longer diffusion, resulting in an equivalent resolution of bare-Si. This novel Si-TPA based STM is highly desired for realizing a high-performance THz imager and provides a feasible approach to breaking the trade-off between resolution and modulation efficiency.
RESUMEN
Landslide displacement monitoring plays a fundamental role in the study of landslide evolution mechanisms, forecasting, risk assessment, prevention, and control. To fill the deficiencies of traditional instrumentation for measuring landslide displacement distributed along lateral direction, a landslide displacement measurement method based on deformation-coupled pipeline trajectory measurement is proposed, and a pipeline trajectory inertial measurement instrument is developed. The developed instrument, primarily comprised of a single shaft gyro, two axis accelerometers, and an external roller encoder, is designed as an axial half strapdown-radial half platform structure combined with a mechanical gravity platform. This structure avoids the singularity of pitch angle and roll angle and can expediently calculate a pipeline trajectory with an Eulerian transformation when obtaining several basic physical variables, e.g., the axial linear velocity, pitch angle, roll angle, and azimuth angle. Additionally, the pipeline trajectory, measured at different times, possesses the ability to reflect the displacement evolution feature of landslides. The results of prototype simulation tests imply a single measurement accuracy of a 12 cm/100 m span and a singly periodic multiple (more than five times) measurement accuracy of a 3 cm/100 m span, which meets medium-precision displacement measurement requirements for a landslide. Additionally, the finished instrument has been successfully applied to the deformation monitoring of the Majiagou I# landslide, which further verifies its feasibility and offers a reference for similar landslides.
RESUMEN
The concentrations and spatial distributions of eight heavy metals in surface sediments and sediment core samples from a shallow lake in China were investigated to evaluate the extent of the contamination and potential ecological risks. The results showed that the heavy metal concentrations were higher in the northern and southwestern lake zones than those in the other lake zones, with lower levels of As, Hg, Zn, Cu, Pb, Cr, and Ni primarily observed in the central and eastern lake regions and Cd primarily confined to areas surrounding the lake. The concentrations of the eight heavy metals in the sediment profiles tended to decrease with increasing sediment depth. The contents of Ni, Cu, Zn, Pb, and Cd in the surface sediment were approximately 1.23-18.41-fold higher than their background values (BVs), whereas the contents of Cr, As, and Hg were nearly identical to their BVs. The calculated pollution load index (PLI) suggested that the surface sediments of this lake were heavily polluted by these heavy metals and indicated that Cd was a predominant contamination factor. The comprehensive potential ecological risk index (PERI) in the surface sediments ranged from 99.2 to 2882.1, with an average of 606.1. Cd contributed 78.7 % to the PERI, and Hg contributed 8.4 %. Multivariate statistical analyses revealed that the surface sediment pollution with heavy metals mainly originated from industrial wastewater discharged by rivers located in the western and northwestern portion of the lake.
Asunto(s)
Arsénico/análisis , Monitoreo del Ambiente , Lagos/química , Metales Pesados/análisis , Contaminantes Químicos del Agua/análisis , China , Ecología , Sedimentos Geológicos/análisis , Mercurio/análisis , Análisis Multivariante , Medición de Riesgo , Aguas Residuales/análisisRESUMEN
Currently, the development of efficient red-emitting persistent phosphor is still an ongoing challenge. Herein, a novel red-emitting LPL phosphor Ca3Ti2O7:Pr(3+) is successfully prepared by a high-temperature solid-state method. XRD Rietveld refinement analyses demonstrate the high phase purity of the sample which crystallizes in an orthorhombic Ccm21 space group with lattice parameters of a = 5.7702(5) Å, b = 19.4829(7) Å, and c = 5.1214(2) Å. Electronic structure of the host matrix is analyzed by the first-principle calculation using CASTEP code. The calculation results show that Ca3Ti2O7 has a direct band gap with CB and VB mainly composed of the Ti-3d and O-2p states, respectively. On the basis of the DR spectrum, the band gap is determined to be 3.6 eV. It is demonstrated that the 612 nm red-emitting persistent luminescence of Ca3Ti2O7:Pr(3+) can be either activated by Ti(4+)-O(2-) â Ti(3+)-O(-) host absorption and Pr(3+)-O-Ti(4+) â Pr(4+)-O-Ti(3+) IVCT in the UV region, or Pr(3+):(3)H4 â (3)PJ transition in the blue region. The red afterglow can last for â¼ 5 min observed by the naked eyes in the dark after ceasing the irradiation source. On the basis of the TL analyses, the trap is found exponentially distributed in the host with the depth of 0.69-0.92 eV. Finally, a possible LPL mechanism for Ca3Ti2O7:Pr(3+) is proposed.
RESUMEN
A blue-emitting phosphor BaSc2Si3O10:Eu(2+) was synthesized using the conventional solid-state reaction. The crystallographic occupancy of Eu(2+) in the BaSc2Si3O10 matrix was studied based on the Rietveld refinement results and the photoluminescence properties. BaSc2Si3O10 exhibits blue emission ascribed to (3)T2-(1)A1 and (3)T1-(1)A1 charge transfer of SiO4(4-) excited by 360 nm. All the phosphors of BaSc2Si3O10:Eu(2+) exhibit strong broad absorption bands in the near ultraviolet range, and give abnormal blue emission upon 330 nm excitation. The abnormal phenomenon was explored in detail through many pieces of experimental evidence. The concentration of Eu(2+) is optimized to be 3 mol% according to emission intensity and the quenching mechanism is verified to be a quadrupole-quadrupole interaction. The CIE coordinates of BaSc2Si3O10:0.03Eu(2+) are calculated to be (0.15, 0.05) and BaSc2Si3O10:0.03Eu(2+) shows similar thermal stability to commercial BaMgAl10O17:Eu(2+).
RESUMEN
Orbit constraint problems can be encountered in mechanical equipment and amusement equipment. Mechanics exercises generally consider the ideal physical model, and the practical problems also consider the influence of friction, which makes the problem more complex and and practical. The problem of the force and oscillation of objects on orbit needs to be deeply discussed. In order to simulate the orbital motion of objects more realistically and help students expand their theoretical mechanics beyond class, we study the orbit constraint of a small bead on a rotating large circular hoop in a horizontal plane about an axis passing through a point on the circumference. The coupling equations followed by the bead on the hoop are derived using Newton's second law in a planar polar coordinate system and solved by numerical methods. We found that under the action of friction, when the initial angular velocity of the bead is greater than the critical angular velocity, the bead will rotate on the ring, and the number of rotations is related to the initial angular velocity and influenced by the friction coefficient. At different initial angular velocities, the number of oscillations of the bead on the hoop is basically the same and ultimately stops near the fixed point.
RESUMEN
Spinal cord injury induces significant cellular stress responses. The Heat Shock Protein 90 (HSP90) plays a pivotal role as a molecular chaperone and is crucial for protein folding, stabilization, and cellular signaling pathways. Despite its important function in stress adaptation, the specific expression patterns and functional roles of HSP90 after nerve injury remain unclear. This study aimed to elucidate the expression dynamics and functional implications of HSP90 following central nervous system (CNS) injury. Using western blotting and immunohistochemical analyses, we observed upregulation of HSP90 expression in spinal cord tissues and within injured neurons in a spinal cord contusion injury model. Additionally, HSP90 was found to enhance neurite outgrowth in primary cortical neurons cultured in vitro. Furthermore, in a glutamate-induced neuronal injury model, the expression of HSP90 was up-regulated, and overexpression of HSP90 promoted neurite re-growth in damaged neurons. Overall, our findings highlight the critical involvement of HSP90 in the neural response to injury and offer valuable insights into potential therapeutic strategies for CNS repair.
Asunto(s)
Proteínas HSP90 de Choque Térmico , Traumatismos de la Médula Espinal , Proteínas HSP90 de Choque Térmico/metabolismo , Animales , Traumatismos de la Médula Espinal/metabolismo , Traumatismos de la Médula Espinal/patología , Neuronas/metabolismo , Células Cultivadas , Ratas Sprague-Dawley , Proyección Neuronal/fisiología , Regulación hacia Arriba , Médula Espinal/metabolismo , Neuritas/metabolismo , Masculino , RatasRESUMEN
A series of Er(3+)-doped (1 - x)CaF(2)-xYbF(3) (0 ≤ x ≤ 0.6) disordered solid-solution nanocrystals with various mean sizes were successfully prepared by a facile solvothermal route. Interestingly, abnormal size-dependent upconversion emissions were demonstrated in these nanocrystals for the first time. With increasing grain size, an obvious enhancement of red to green emission ratio was observed in the Er(3+) (2 mol%): 0.4CaF(2)-0.6YbF(3) nanocrystals, which is the opposite of the routine size-dependent upconversion emission behavior reported previously. Taking Eu(3+) ions as a structural probe, we investigated the influence of a disordered solid-solution structure on Ln(3+) luminescence, and proposed that Ln(3+) clusters formed in the host should play a key role to induce this unusual size-dependent upconversion emission phenomenon. As a consequence, multi-colors such as green, yellow, and red upconversion emissions can be easily realized by appropriately modifying the Yb(3+) content in the Er(3+)-doped (1 - x)CaF(2)-xYbF(3) nanocrystals. The reported results will deepen the understanding of size effects on the lanthanide upconversion in nanocrystals.
RESUMEN
Thermal Barrier Coatings (TBCs) are functional coatings used to protect high-temperature components that are prone to early damage and premature failure under the influence of complex working conditions. This paper examines the crack propagation behaviour of 8% yttria-stabilized zirconia (8YSZ) EB-PVD TBCs under different oxidation conditions at 1100 °C. The morphology of interfacial cracks after oxidation was summarized and the evolution of thermally grown oxide (TGO) was quantified. Based on the evolution of TGO, the causes of crack propagation were analyzed. For the specimens after oxidation experiment, the interfacial crack propagation behaviour was observed and analyzed by SEM, and the reason of lateral crack propagation was explained from the perspective of interfacial fracture toughness. The reason for crack deflection is analyzed from the perspective of energy release rate. The equivalent thickness, normalized rumpling index and two-dimensional roughness index were calculated, then the TGO growth behaviour was comprehensively analyzed and related to the crack propagation.
RESUMEN
Stiffness variable polymers are an essential family of materials that have aroused considerable attention in soft actuators. Although lots of strategies have been proposed to achieve variable stiffness, it remains a formidable challenge to achieve a polymer with a wide stiffness range and fast stiffness change. Herein, a series of variable stiffness polymers with a fast stiffness change and wide stiffness range were successfully synthesized, and the formulas were optimized via Pearson correlation tests. The rigid/soft stiffness ratio of the designed polymer samples can reach up to 1376-folds. Impressively, owing to the phase-changing side chains, the narrow endothermic peak can be observed with full width at half-maximum within 5 °C. Moreover, the shape memory properties of the shape fixity (Rf) and shape recovery ratio (Rr) values of the shape memory properties could reach up to 99.3 and 99.2%, respectively. Then, the obtained polymer was introduced into a kind of designed 3D printing soft actuator. The soft actuator can achieve sharp heating-cooling cycle of 19 s under a 1.2 A current with 4 °C water as coolant and can lift a 200 g weight at the actuating state. Moreover, the stiffness of the soft actuator can reach up to 718 mN/mm. The soft actuator exhibits an outstanding actuate behavior and stiffness switchable capability. We expect our design strategy and obtained variable stiffness polymers to be potentially applied in soft actuators and other devices.
RESUMEN
Iron impurities are believed to act as deep acceptors that can compensate for the n-type conductivity in as-grown Ga2O3, but several scientific issues, such as the site occupation of the Fe heteroatom and the complexes of Fe-doped ß-Ga2O3 with native defects, are still lacking. In this paper, based on first-principle density functional theory calculations with the generalized gradient approximation approach, the controversy regarding the preferential Fe incorporation on the Ga site in the ß-Ga2O3 crystal has been addressed, and our result demonstrates that Fe dopant is energetically favored on the octahedrally coordinated Ga site. The structural stabilities are confirmed by the formation energy calculations, the phonon dispersion relationships, and the strain-dependent analyses. The thermodynamic transition level Fe3+/Fe2+ is located at 0.52 eV below the conduction band minimum, which is consistent with Ingebrigtsen's theoretical conclusion, but slightly smaller than some experimental values between 0.78 eV and 1.2 eV. In order to provide direct guidance for material synthesis and property design in Fe-doped ß-Ga2O3, the defect formation energies, charge transitional levels, and optical properties of the defective complexes with different kinds of native defects are investigated. Our results show that VGa and Oi can be easily formed for the Fe-doped ß-Ga2O3 crystals under O-rich conditions, where the +3 charge state FeGaGai and -2 charge state FeGaOi are energetically favorable when the Fermi level approaches the valence and conduction band edges, respectively. Optical absorption shows that the complexes of FeGaGai and FeGaVGa can significantly enhance the optical absorption in the visible-infrared region, while the energy-loss function in the ß-Ga2O3 material is almost negligible after the extra introduction of various intrinsic defects.
RESUMEN
In this communication, a thermolysis route is developed to synthesize novel Cu(1.94)S-ZnS-Cu(1.94)S nanoheterostructures with interesting sandwich-like architectures, taking Cu(1.94)S nanoplates as precursors. Evidently, the trimeric nanostructure is formed by a three-stage process, which includes the Zn-oleate induced assembling of Cu(1.94)S nanoplate couples, the heteronucleation and growth of a ZnS layer between two Cu(1.94)S plates dominated by interfacial diffusion, and the catalyst assisted axial growth of ZnS nanorod following the solution-liquid-solid mechanism. With epitaxial growth of ZnS nanocrystal between two Cu(1.94)S nanoplates, the localized surface plasmon resonance frequency of Cu(1.94)S shifts from 1875 to 1323 nm, indicating that this new material is potentially applicable as a light absorbing agent in laser photothermal therapy. The reported growth mechanism may provide new strategies for designing and fabricating various technologically important polymeric nanoheterostructures.
RESUMEN
Improving urban comprehensive carbon emission performance (CCEP) is the inevitable choice for China's low-carbon development. With the continuous integration of digital technology and financial elements, the development of urban digital finance has also been significantly improved. To further explore the impact of urban digital finance on urban low-carbon development, using the data of 281 cities in China from 2011 to 2019, this paper firstly evaluates the urban CCEP, and further empirically investigates how digital finance influences CCEP. The empirical results show that: (1) Digital finance significantly improves the urban CCEP, and after conducting robustness tests and addressing the endogeneity issue, the above conclusion is robust. (2) For the sub-indicators, there is a U-shaped relationship between the coverage breadth of digital finance and CCEP. Moreover, the improvement of usage depth and digital support services could promote CCEP. (3) The channel tests indicate that digital finance improves the CCEP mainly by promoting green technology innovation and the development of urban tertiary industry. Meantime, digital finance has a stronger impact on improving CCEP in cities with more developed traditional finance, and the positive effect is significant in non-old industrial base cities and a two-control zone. Finally, this paper puts forward relevant policy suggestions.
Asunto(s)
Carbono , Industrias , Carbono/análisis , China , Ciudades , Desarrollo Económico , Remodelación UrbanaRESUMEN
BACKGROUND: GABAergic deficits have been considered to be associated with the pathophysiology of schizophrenia, and hence, GABA receptors subtype A (GABAARs) modulators, such as commonly used volatile anesthetic sevoflurane, may have therapeutic values for schizophrenia. The present study investigates the therapeutic effectiveness of low-concentration sevoflurane in MK801-induced schizophrenia-like mice and schizophrenia patients. METHODS: Three weeks after MK801 administration (0.5 mg kg-1, i.p. twice a day for 5 days), mice were exposed to 1% sevoflurane 1hr/day for 5 days. Behavioral tests, immunohistochemical analysis, western blot assay, and electrophysiology assessments were performed 1-week post-exposure. Ten schizophrenia patients received 1% sevoflurane 5 hrs per day for 6 days and were assessed with the Positive and Negative Syndrome Scale (PANSS) and the 18-item Brief Psychiatric Rating Scale (BPRS-18) at week 1 and week 2. RESULTS: MK801 induced hypolocomotion and social deficits, downregulated expression of NMDARs subunits and postsynaptic density protein 95 (PSD95), reduced parvalbumin - and GAD67-positive neurons, altered amplitude and frequency of mEPSCs and mIPSCs, and increased the excitation/inhibition ratio. All these changes induced by MK-801 were attenuated by sevoflurane administration. Six and eight patients achieved a response defined as a reduction of at least 30% in the PANSS total score at 1st and 2nd week after treatments. The BPRS-18 total score was found to be significantly decreased by 38% at the 2nd week (p < 0.01). CONCLUSION: Low-concentration sevoflurane effectively reversed MK801-induced schizophrenialike disease in mice and alleviated schizophrenia patients' symptoms. Our work suggests sevoflurane to be a valuable therapeutic strategy for treating schizophrenia patients.
Asunto(s)
Maleato de Dizocilpina , Esquizofrenia , Ratones , Animales , Sevoflurano/efectos adversos , Maleato de Dizocilpina/efectos adversos , Esquizofrenia/inducido químicamente , Esquizofrenia/tratamiento farmacológico , Estudios de Factibilidad , NeuronasRESUMEN
Nd(3+) sensitized Er(3+):(4)I(13/2) mid-IR emissions around 2.7 µm were investigated in the transparent Ga(2)S(3)-GeS(2)-CsCl chalcohalide glasses for the first time. Remarkably, it is found that Nd(3+) greatly enhances Er(3+) 2.7 µm emission by a maximal 20 times, and depopulates the lower level of Er(3+):(4)I(13/2) for population inversion. Based on Judd-Ofelt theory, the 2.7 µm emission cross section is calculated (as high as 0.66×10(-20) cm(2)) and the gain property of the Er(3+):(4)I(11/2)â(4)I(13/2) transition is discussed. Hopefully, the materials studied here may find potential applications in the fields of fiber amplifiers and mid-IR lasers.
Asunto(s)
Calcógenos/química , Erbio/química , Vidrio/química , Halógenos/química , Neodimio/química , Transferencia de Energía , Espectrofotometría InfrarrojaRESUMEN
A first-order quantum cutting luminescence of Ho3+/Yb3+ couples, which are incorporated in the YF3 nanocrystals embedded in transparent glass ceramic, is reported for the first time, to our knowledge. When Ho3+ is excited with one blue photon, it was experimentally demonstrated that the resonant energy transfer from Ho3+ to Yb3+ occurs, leading to the near-infrared quantum cutting with one Ho3+ photon emitting at 1180 nm and one Yb3+ photon at 980 nm. The theoretical quantum efficiency is evaluated to be 159%.