RESUMEN
Since delocalization of electronic states is a prerequisite for exerting unique electron transport properties, early actinides (An) with highly delocalized 5f/6d orbitals are natural candidates. However, given the experimental difficulties of such radioactive compounds and the complex relativistic effects in theoretical studies, understanding the electronic structure and bonding of actinides is underdeveloped on the periodic table. A further challenge is the very complicated electronic structures encountered in the confinement of actinides, as vividly illustrated by the weakly radioactive Th(Thorium)-encapsulated metal chalcogenide clusters, Th@Co6Te8L6 (L = PH3, PMe3, PEt3). Here we report the electronic structure and the electron transport properties of the Th@Co6Te8L6 clusters and compare them with those of the hollow Co6Te8L6 clusters using the nonequilibrium Green's function combined with relativistic density functional theory (NEGF-DFT). We found that the equilibrium conductance in Th@Co6Te8(PH3)6 (0.76 G0) has been greatly improved over that in Co6Te8(PH3)6 (0.03 G0), which has also been verified under an applied different bias voltage. The covalent bonding character between 6d (Th) and 3d (Co) atomic orbitals resulting from steric confinement is the source of the performance enhancement and a most important factor governing the accessibility of such 5f/6d orbitals. The results are of significance to the rapidly developing field of molecular nanoelectronics.
RESUMEN
A photoelectrochemical (PEC) cell is able to realize effective solar-to-hydrogen energy conversion from water by using the semiconductor photoelectrode. Semiconducting colloidal quantum dots (QDs) with captivating features of size-tunable optoelectronic properties and broad light absorption are regarded as promising photosensitizers in solar-driven PEC systems. Up to now, different types of QDs have been developed to achieve high-efficiency PEC H2 generation, while the majority of state-of-the-art QDs-PEC systems are still fabricated from QDs consisting of heavy metals (e.g., Cd and Pb), which are extremely harmful to the human health and natural environment. In this context, substantial efforts have been made to mitigate the usage of highly toxic heavy metals and concurrently promote the development of alternative environment-friendly QDs with comparable features. This review presents recent advances of solar-driven PEC devices based on several typical environment-friendly QDs (e.g., carbon QDs, I-III-VI QDs and III-V QDs). A variety of techniques (e.g., shell thickness tuning, alloying/doping, and ligands exchange, etc.) to engineer these QD's optoelectronic properties and achieve high-efficiency PEC H2 production are thoroughly discussed. Furthermore, the critical challenges and future perspectives of advanced eco-friendly QDs-PEC systems in terms of QDs' synthesis, photo-induced charge kinetics, and operation stability/efficiency are briefly proposed.
RESUMEN
A significant challenge exists in obtaining chiral nanostructures that are amenable to both solution-phase self-assembly and solid-phase preservation, which enable the observation of unveiled optical responses impacted by the dynamic or static conformation and the incident excitations. Here, to meet this demand, we employed DNA origami technology to create quasi-planar chiral satellite-core nanoparticle superstructures with an intermediate geometry between the monolayer and the double layer. We disentangled the complex chiral mechanisms, which include planar chirality, 3D chirality, and induced chirality transfer, through combined theoretical studies and thorough experimental measurements of both solution- and solid-phase samples. Two distinct states of optical responses were demonstrated by the dynamic and static conformations, involving a split or nonsplit circular dichroism (CD) line shape. More importantly, our study on chiral nanoparticle superstructures on a substrate featuring both a dominant 2D geometry and a defined 3D represents a great leap toward the realization of colloidal chiral metasurfaces.
Asunto(s)
Oro , Nanopartículas del Metal , Dicroismo Circular , ADN/química , Oro/química , Nanopartículas del Metal/química , Conformación MolecularRESUMEN
Mastering the manipulation of chirality at the nanoscale has long been a priority for chemists, physicists, and materials scientists, given its importance in the biochemical processes of the natural world and in the development of novel technologies. In this vein, the formation of novel metamaterials and sensing platforms resulting from the synergic combination of chirality and plasmonics has opened new avenues in nano-optics. Recently, the implementation of chiral plasmonic nanostructures in photocatalysis has been proposed theoretically as a means to drive polarization-dependent photochemistry. In the present work, we demonstrate that the use of inorganic nanometric chiral templates for the controlled assembly of Au and TiO2 nanoparticles leads to the formation of plasmon-based photocatalysts with polarization-dependent reactivity. The formation of plasmonic assemblies with chiroptical activities induces the asymmetric formation of hot electrons and holes generated via electromagnetic excitation, opening the door to novel photocatalytic and optoelectronic features. More precisely, we demonstrate that the reaction yield can be improved when the helicity of the circularly polarized light used to activate the plasmonic component matches the handedness of the chiral substrate. Our approach may enable new applications in the fields of chirality and photocatalysis, particularly toward plasmon-induced chiral photochemistry.
RESUMEN
A cost-effective and high-efficiency photoelectrochemical (PEC) water splitting system based on colloidal quantum dots (QDs) represents a potential solar-to-hydrogen (STH) conversion technology to achieve future carbon neutrality. Herein, a self-biased PEC cell consisting of BiVO4 photoanode and Cu2 O photocathode both decorated with Zn-doped CuInS2 (ZCIS) QDs is successfully fabricated. The intrinsic charge dynamics of the photoelectrodes are efficiently optimized via rational engineering of the surface ligands capped on QDs with controllable chain lengths and binding affinities to the metal oxide electrodes. It is demonstrated that the short-chain monodentate 1-dodecanethiol ligands are beneficial to ZCIS QDs for suppressing charge recombination, which enables the construction of tight heterojunction with coupled metal oxide electrodes, leading to effective photo-induced charge transfer/injection for enhanced PEC performance. The QD decorated BiVO4 and Cu2 O photoelectrodes in pairs demonstrate a self-biased PEC water splitting process, delivering an STH efficiency of 0.65% with excellent stability under AM 1.5 G one-sun illumination. The results highlight the significance of synergistic ligand and heterojunction engineering to build highly efficient and robust QDs-based PEC devices for self-biased solar water splitting.
RESUMEN
The detection of acetone in the gaseous form in exhaled breath using an integrated sensor can provide an effective tool for disease diagnostics as acetone is a marker for monitoring human metabolism. An on-chip acetone gas sensor based on the principle of Mach-Zehnder interferometer is proposed and demonstrated. The sensing arm of the device is activated with a composite film of polyethyleneimine and amido-graphene oxide as the gas-sensitive adsorption layer. The composite film demonstrates good selectivity to acetone gas, can be used repeatedly, and is stable in long-term use. Room temperature operation has been demonstrated for the sensor with high sensitivity under a 20â ppm acetone environment. The detection limit can reach 0.76â ppm, making it feasible to be used for the clinical diagnosis of diabetes and the prognosis of heart failure.
Asunto(s)
Acetona , Técnicas Biosensibles , Humanos , Límite de Detección , Polietileneimina , GasesRESUMEN
Recent advances in moiré superlattices and moiré excitons, such as quantum emission arrays, low-energy flat bands, and Mott insulators, have rapidly attracted attention in the fields of optoelectronics, materials, and energy research. The interlayer twist turns into a degree of freedom that alters the properties of the systems of materials, and the realization of moiré excitons also offers the feasibility of making artificial exciton crystals. Moreover, moiré excitons exhibit many exciting properties under the regulation of various external conditions, including spatial polarisation, alternating dipolar to alternating dipolar moments and gate-dependence to gate voltage dependence; all are pertinent to their applications in nano-photonics and quantum information. But the lag in theoretical development and the low-efficiency of processing technologies significantly limit the potential of moiré superlattice applications. In this review, we systematically summarise and discuss the recent progress in moiré superlattices and moiré excitons, and analyze the current challenges, and put forward relevant recommendations. There is no doubt that further research will lead to breakthroughs in their application and promote reforms and innovations in traditional solid-state physics and materials science.
RESUMEN
Plasmonic nanocrystals and their assemblies are excellent tools to create functional systems, including systems with strong chiral optical responses. Here we study the possibility of growing chiral plasmonic nanocrystals from strictly nonchiral seeds of different types by using circularly polarized light as the chirality-inducing mechanism. We present a novel theoretical methodology that simulates realistic nonlinear and inhomogeneous photogrowth processes in plasmonic nanocrystals, mediated by the excitation of hot carriers that can drive surface chemistry. We show the strongly anisotropic and chiral growth of oriented nanocrystals with lowered symmetry, with the striking feature that such chiral growth can appear even for nanocrystals with subwavelength sizes. Furthermore, we show that the chiral growth of nanocrystals in solution is fundamentally challenging. This work explores new ways of growing monolithic chiral plasmonic nanostructures and can be useful for the development of plasmonic photocatalysis and fabrication technologies.
Asunto(s)
Nanopartículas , Nanoestructuras , Dicroismo Circular , Nanoestructuras/químicaRESUMEN
Current great progress on potassium-chalcogen (S, Se, Te) batteries within much potential to become promising energy storage systems opens a new avenue for the rapid development of potassium batteries as a complementary option to lithium ion batteries. The discussion mainly concentrates on recent research advances of potassium-chalcogen (S, Se, Te) batteries and their corresponding cathode materials in this review. Initially, the development of cathode materials for four types of batteries is introduced, including: potassium-sulfur (K-S), potassium-selenium (K-Se), potassium-selenium sulfide (K-Sex Sy ), and potassium-tellurium (K-Te) batteries. Next, critical challenges for chalcogen-based electrodes in devices operation are summarized. In addition, some pragmatic strategies are proposed as well to relieve the low electronic conductivity, large volumetric expansion, shuttle effect, and potassium dendrite growth. At last, the perspectives on designing advanced cathode materials for potassium-chalcogen batteries are provided with the goal of developing high-performance potassium storage devices.
RESUMEN
While organic materials have demonstrated industry-leading performances in a wide array of electronic applications (including OLEDs and OPVs), their use for integration into electronic circuits has been so far limited, in spite of their potential for portable, flexible, light-weight, low-cost applications. However, recent advances in organic (semi)conductors and novel designs in organic field-effect transistors and hybrid systems have reaffirmed the potential of organic logic circuits. This review article provides an overview of organic-based inverter operation and considers all aspects of such circuits including their active layer, processing methods, hybrid organic/inorganic inverters, novel architectures and potential applications.
RESUMEN
The realization of chiral photochemical reactions at the molecular level has proven to be a challenging task, with invariably low efficiencies originating from very small optical circular dichroism signals. On the contrary, colloidal nanocrystals offer a very large differential response to circularly polarized light when designed with chiral geometries. We propose taking advantage of this capability, introducing a novel mechanism driving surface photochemistry in a chiral nanocrystal. Plasmonic nanocrystals exhibit anomalously large asymmetry factors in optical circular dichroism (CD), and the related hot-electron generation shows in turn a very strong asymmetry, serving as a mechanism for chiral growth. Through theoretical modeling, we show that chiral plasmonic nanocrystals can enable chiral surface growth based on the generation of energetic (hot) electrons. Using simple and realistic phenomenological models, we illustrate how this kind of surface photochemistry can be observed experimentally. The proposed mechanism is efficient if it operates on an already strongly chiral nanocrystal, whereas our proposed mechanism does not show chiral growth for initially nonchiral structures in a solution. The asymmetry factors for the chiral effects, driven by hot electrons, exceed the values observed in chiral molecular photophysics at least 10-fold. The proposed chiral-growth mechanism for the transformation of plasmonic colloids is fundamentally different to the traditional schemes of chiral photochemistry at the molecular level.
RESUMEN
An ultrathin near-perfect MoSe2 absorber working in the visible regime is demonstrated theoretically and experimentally, and it consists of a MoSe2/Au bi-layer film. The polymer-assisted deposition method is used to synthesize MoSe2 films, which can reduce the roughness and thus improve the film absorption. Simulation results show that the absorption of the absorber with 22 nm MoSe2 reaches to larger than 90% between 628.5 nm and 718 nm with a peak value up to 99.5% at 686 nm. Moreover, the measured absorption also shows near-perfect absorption of this simple absorber. Finally, an ultrathin photodetector is fabricated based on this perfect absorber and shows on/off reproducibility and remarkable photocurrent, which is three orders of magnitude higher than the dark current.
RESUMEN
Ferroelectric materials may be used as effective photoelectrocatalysts for water splitting due to enhanced charge carrier separation driven by their spontaneous polarization induced internal electric field. Compared to other ferroelectric materials, BiFeO3 exhibits a high catalytic efficiency due to its comparatively smaller bandgap, which enables light absorption from a large part of the solar spectrum and its higher bulk ferroelectric polarization. Here, we compare the photoelectrochemical properties of three different BiFeO3 morphologies, namely, nanofibers, nanowebs, and thin films synthesized via electrospinning, directly on fluorine-doped tin oxide (FTO) coated glass substrates. A significant photocathodic current in the range from -86.2 to -56.5 µA cm-2 at -0.4 V bias (vs Ag/AgCl) has been recorded for all three morphologies in 0.1M Na2SO4 aqueous solution (pH = 6.8). Among these morphologies, BiFeO3 nanofibers exhibit higher efficiency because of their larger surface area and improved charge separation resulting from rapid diffusion of photoinduced charge carriers along the axis of the nanofiber. In the case of BiFeO3 nanofibers, we obtained the highest photocurrent density of -86.2 µA/cm2 at -0.4 V bias (vs Ag/AgCl electrode) and an onset potential of 0.22 V. We also observed that the onset potential of the photocathodic current can be increased by applying a positive polarization voltage, which leads to favorable bending of band edges at the electrode/electrolyte interface resulting in increased charge carrier separation.
RESUMEN
Ultrathin 2D molybdenum disulfide (MoS2 ), which is the flagship of 2D transition-metal dichalcogenide nanomaterials, has drawn much attention in the last few years. 2D MoS2 has been banked as an alternative to platinum for highly active hydrogen evolution reaction because of its low cost, high surface-to-volume ratio, and abundant active sites. However, when MoS2 is used directly as a photocatalyst, contrary to public expectation, it still performs poorly due to lateral size, high recombination ratio of excitons, and low optical cross section. Besides, simply compositing MoS2 as a cocatalyst with other semiconductors cannot satisfy the practical application, which stimulates the pursual of a comprehensive insight into recent advances in synthesis, properties, and enhanced hydrogen production of MoS2 . Therefore, in this Review, emphasis is given to synthetic methods, phase transitions, tunable optical properties, and interfacial engineering of 2D MoS2 . Abundant ways of band edge tuning, structural modification, and phase transition are addressed, which can generate the neoteric photocatalytic systems. Finally, the main challenges and opportunities with respect to MoS2 being a cocatalyst and coherent light-matter interaction of MoS2 in photocatalytic systems are proposed.
RESUMEN
Semiconductor nanocrystals exhibit size-tunable absorption and emission ranging from the ultraviolet (UV) to the near-infrared (NIR) spectral range, high absorption coefficient, and high photoluminescence quantum yield. Effective surface passivation of these so-called quantum dots (QDs) may be achieved by growing a shell of another semiconductor material. The resulting core/shell QDs can be considered as a model system to study and optimize structure/property relations. A special case consists in growing thick shells (1.5 up to few tens of nanometers) to produce "giant" QDs (g-QDs). Tailoring the chemical composition and structure of CdSe/CdS and PbS/CdS g-QDs is a promising approach to widen the spectral separation of absorption and emission spectra (i.e., the Stokes shift), improve the isolation of photogenerated carriers from surface defects and enhance charge carrier lifetime and mobility. However, most stable systems are limited by a thick CdS shell, which strongly absorbs radiation below 500 nm, covering the UV and part of the visible range. Modification of the interfacial region between the core and shell of g-QDs or tuning their doping with narrow band gap semiconductors are effective approaches to circumvent this challenge. In addition, the synthesis of g-QDs composed of environmentally friendly elements (e.g., CuInSe2/CuInS2) represents an alternative to extend their absorption into the NIR range. Additionally, the band gap and band alignment of g-QDs can be engineered by proper selection of the constituents according to their band edge positions and by tuning their stoichiometry during wet chemical synthesis. In most cases, the quasi-type II localization regime of electrons and holes is achieved. In this type of g-QDs, electrons can leak into the shell region, while the holes remain confined within the core region. This electron-hole spatial distribution is advantageous for optoelectronic devices, resulting in efficient electron-hole separation while maintaining good stability. This Account provides an overview of emerging engineering strategies that can be adopted to optimize structure/property relations in colloidal g-QDs for efficient photon management or charge separation/transfer. In particular, we focus on our recent contributions to this rapidly expanding field of research. We summarize the design and synthesis of a variety of colloidal g-QDs with the aim of tuning the optical properties, such as absorption/emission in a wide region of the solar spectrum, which allows enlargement of their Stokes shift. We also describe the band alignment within these systems, charge carrier dynamics, and charge transfer from g-QDs into semiconducting oxides. We show how these tailored g-QDs may be used as active components in luminescent solar concentrators, photoelectrochemical cells for hydrogen generation, QD-sensitized solar cells and optical nanothermometers. In each case, we aim at providing insights on structure/property relationships and on how to optimize them toward improving device performance. Finally, we describe perspectives for future work, sketching new directions and opportunities in this field of research at the intersection between chemistry, physics, materials science and engineering.
RESUMEN
Although chemical vapor deposition is the most common method to synthesize transition metal dichalcogenides (TMDs), several obstacles, such as the high annealing temperature restricting the substrates used in the process and the required transfer causing the formation of wrinkles and defects, must be resolved. Here, we present a novel method to grow patternable two-dimensional (2D) transition metal disulfides (MS2) directly underneath a protective coating layer by spin-coating a liquid chalcogen precursor onto the transition metal oxide layer, followed by a laser irradiation annealing process. Two metal sulfides, molybdenum disulfide (MoS2) and tungsten disulfide (WS2), are investigated in this work. Material characterization reveals the diffusion of sulfur into the oxide layer prior to the formation of the MS2. By controlling the sulfur diffusion, we are able to synthesize continuous MS2 layers beneath the top oxide layer, creating a protective coating layer for the newly formed TMD. Air-stable and low-power photosensing devices fabricated on the synthesized 2D WS2 without the need for a further transfer process demonstrate the potential applicability of TMDs generated via a laser irradiation process.
RESUMEN
Iron pyrite (FeS2) nanostructures are of considerable interest for photovoltaic applications due to improved material quality compared to their bulk counterpart. As an abundant and nontoxic semiconductor, FeS2 nanomaterials offer great opportunities for low-cost and green photovoltaic technology. This paper describes the fabrication of FeS2 nanowire arrays via sulfurization of iron oxide nanotubes at relatively low temperatures. A facile synthesis of ordered iron oxide nanotubes was achieved through anodization of iron foils. Characterization of the iron sulfide nanowires indicates that pyrite structures were formed. A prototype FeS2 nanowire photoconductor demonstrates very high responsivity (>3.0 A/W). The presented method can be further explored to fabricate various FeS2 nanostructures, such as nanoparticles, nanoflowers, and nanoplates.
RESUMEN
Colloidal quantum dots (QDs) hold great promise as building blocks in solar technologies owing to their remarkable photostability and adjustable properties through the rationale involving size, atomic composition of core and shell, shapes, and surface states. However, most high-performing QDs in solar conversion contain hazardous metal elements, including Cd and Pb, posing significant environmental risks. Here, a comprehensive review of heavy-metal-free colloidal QDs for solar technologies, including photovoltaic (PV) devices, solar-to-chemical fuel conversion, and luminescent solar concentrators (LSCs), is presented. Emerging synthetic strategies to optimize the optical properties by tuning the energy band structure and manipulating charge dynamics within the QDs and at the QDs/charge acceptors interfaces, are analyzed. A comparative analysis of different synthetic methods is provided, structure-property relationships in these materials are discussed, and they are correlated with the performance of solar devices. This work is concluded with an outlook on challenges and opportunities for future work, including machine learning-based design, sustainable synthesis, and new surface/interface engineering.
RESUMEN
Metal halide perovskites (MHP) emerged as highly promising materials for photocatalysis, offering significant advancements in the degradation of soluble and airborne pollutants, as well as the transformation of functional organic compounds. This comprehensive review focuses on recent developments in MHP-based photocatalysts, specifically examining two major categories: lead-based (such as CsPbBr3) and lead-free variants (e.g. Cs2AgBiX6, Cs3Bi2Br9 and others). While the review briefly discusses the contributions of MHPs to hydrogen (H2) production and carbon dioxide (CO2) reduction, the main emphasis is on the design principles that determine the effectiveness of perovskites in facilitating organic reactions and degrading hazardous chemicals through oxidative transformations. Furthermore, the review addresses the key factors that influence the catalytic efficiency of perovskites, including charge recombination, reaction mechanisms involving free radicals, hydroxyl ions, and other ions, as well as phase transformation and solvent compatibility. By offering a comprehensive overview, this review aims to serve as a guide for the design of MHP-based photocatalysis and shed light on the common challenges faced by the scientific community in the domain of organic transformations.
RESUMEN
Thick-shell colloidal quantum dots (QDs) are promising building blocks for solar technologies due to their size/composition/shape-tunable properties. However, most well-performed thick-shell QDs suffer from frequent use of toxic metal elements including Pb and Cd, and inadequate light absorption in the visible and near-infrared (NIR) region due to the wide bandgap of the shell. In this work, eco-friendly AgInSe2 /AgInS2 core/shell QDs, which are optically active in the NIR region and are suitable candidates to fabricate devices for solar energy conversion, are developed. Direct synthesis suffers from simultaneously controlling the reactivity of multiple precursors, instead, a template-assisted cation exchange method is used. By modulating the monolayer growth of template QDs, gradient AgInSeS shell layers are incorporated into AgInSe2 /AgInS2 QDs. The resulting AgInSe2 /AgInSeS/AgInS2 exhibits better charge transfer than AgInSe2 /AgInS2 due to their favorable electronic band alignment, as predicted by first-principle calculations and confirmed by transient fluorescence spectroscopy. The photoelectrochemical cells fabricated with AgInSe2 /AgInSeS/AgInS2 QDs present ≈1.5-fold higher current density and better stability compared to AgInSe2 /AgInS2 . The findings define a promising approach toward multinary QDs and pave the way for engineering the QDs' electronic band structures for solar-energy conversion.