The rs6427384 and rs6692977 Single Nucleotide Polymorphisms of the Fc Receptor-Like 5 (FCRL5) Gene and the Risk of Ankylosing Spondylitis: A Case Control Study in a Single Center in China.

BACKGROUND The study aimed to explore the genetic association of Fc receptor-like 5 (FCRL5) gene variants (rs6427384 and rs6692977) with ankylosing spondylitis risk in Chinese Han population. MATERIAL AND METHODS Genotyping for FCRL5 gene variations rs6427384 and rs6692977 was implemented among 130 ankylosing spondylitis cases and 135 healthy persons, through polymerase chain reaction restriction fragment length polymorphism (PCR-RFLP) method. Frequency dissimilarity for 2 polymorphisms was compared between 2 groups using chi-square test. The association strength of FCRL5 gene polymorphism with ankylosing spondylitis risk was estimated by odds ratios with 95% confidence intervals. RESULTS The frequencies of rs6427384 CC genotype and C allele were significantly lower in the case group than that in the control group (P<0.05), which suggested that C allele of rs6427384 polymorphism might offer protection against ankylosing spondylitis onset. Whereas only 2 genotypes of rs6692977 were detected in the control group, and no significant association was found with ankylosing spondylitis susceptibility. CONCLUSIONS FCRL5 gene polymorphism rs6427384 was correlated to ankylosing spondylitis occurrence among Chinese Han population, while rs6692977 was not.

Superhydrophobic Polyhydroxyalkanoates: Preparation and Applications.

Poly( R-3-hydroxybutyrate- co- R-3-hydroxyhexanoate) (PHBHHx), a family member of microbial polyhydroxyalkanoates (PHA), is a biodegradable and biocompatible material with some hydrophobicity and reasonable strength for packaging and tissue engineering applications. In this study, superhydrophobic PHBHHx is fabricated via a simple nonsolvent-assisted process. The material can absorb all tested hydrophobic solvents and oil up to 6-fold of the material weights from water, permitting applications for cleaning environmental oil or solvent pollutions with convenience of disposal after the usage due to its biodegradability. With an excellent combination of biodegradability and biocompatibility, superhydrophobic PHBHHx films are evaluated for antibioadhesion properities to exploit possible implant usages. Up to 100% reductions for platelet adhesions on the superhydrophobic PHBHHx surfaces are observed compared with that on the control material surfaces. Superhydrophobic biodegradable and biocompatible PHBHHx films demonstrate promising low value and high volume or high value and low volume applications.

Highly Efficient Fluorescent Material Based on Rare-Earth-Modified Polyhydroxyalkanoates.

Fluorescent materials play an important role in biomedical fields. However, the main types of fluorescent materials suffer from several disadvantages especially the biotoxicity, which largely restrict its wider applications in biological fields. In this study, a highly efficient rare-earth-modified fluorescent material was successfully designed and fabricated based on polyhydroxyalkanoates, which are known as biodegradable and biocompatible materials. A new Functional-PHA polymer was microbially synthesized by engineered Halomonas bluephagenesis and was used as a basal matrix to generate the rare-earth-modified PHA. N-Acetyl-l-cysteine-grafted PHA (NAL-grafted-PHA) was first produced via a UV-initiated thiol-ene click reaction and the rare earth metal ions (Eu3+ and Tb3+) were subsequently chelated onto the NAL-grafted-PHA through the coordination effect. The composite material exhibited intense photoluminescence properties under UV laser excitation, indicating the excellent features as fluorescent material. The enhanced hydrophilicity and superior biocompatibility of rare-earth-chelated PHA were confirmed, suggesting its great potential application value in biomedical fields.

Highly expressed lncRNA CCND2-AS1 promotes glioma cell proliferation through Wnt/ß-catenin signaling.

Glioma is the most common and aggressive primary brain tumor in adults. Long-non coding RNAs (lncRNAs) have been recently shown to play important roles in regulating numerous biological processes both in physiologic and pathologic condition. However, the role of lncRNAs in glioma remains largely unknown. In this study, we firstly found that lncRNA CCND2-AS2 is significantly up regulated in malignant glioma tissues and cell lines. Both loss- and gain-functions assays show that CCND2-AS1 promotes glioma cells proliferation and growth. In addition, we also revealed that highly expressed CCND2-AS1 could enhance Wnt/ß-catenin signaling in glioma. Taken together, our findings revealed a novel lncRNA CCND2-AS1 promotes glioma cell proliferation through Wnt/ß-catenin signaling and CCND2-AS1 might function as a potential novel therapeutic target for the treatment of glioma.

Synthesis, Characterization and Application of Thermoresponsive Polyhydroxyalkanoate-graft-Poly(N-isopropylacrylamide).

A thermoresponsive graft copolymer polyhydroxyalkanoate-g-poly(N-isopropylacrylamide) or short as PHA-g-PNIPAm, was successfully synthesized via a three-step reaction. First, PNIPAm oligomer with a trithiocarbonate-based chain transfer agent (CTA), short as PNIPAm-CTA, with designed polymerization degree was synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization. Subsequently, the PNIPAm-CTA was treated with n-butylamine for aminolysis in order to obtain a pendant thiol group at the end of the chain (PNIPAm-SH). Finally, the PNIPAm-SH was grafted onto unsaturated P(3HDD-co-3H10U), a random copolymer of 3-hydroxydodecanoate (3HDD) and 3-hydroxy-10-undecylenate (3H10U), via a thiol-ene click reaction. Enhanced hydrophilicity and thermoresponsive property of the resulted PHA-g-PNIPAm were confirmed by water contact angle studies. The biocompatibility of PHA-g-PNIPAm was comparable to poly-3-hydroxybutyrate (PHB). The graft copolymer PHA-g-PNIPAm based on biopolyester PHA could be a promising material for biomedical applications.

Seasonal characteristics of chlorophyll-a and its relationship with environmental factors in Yunmeng Lake of China.

Sampling was carried out according to the season, in order to analyze the seasonal characteristics of chlorophyll-a and its relationship with environmental factors in Yunmeng Lake on 1st May, 12th August, 1st October and 14th December of 2013. The results showed that the average annual water temperature, pH, TP, TN and chlorophyll-a concentration in Yunmeng Lake was 15.9°C, 7.12, 0.07 mg l(-1), 1.58 mg l(-1) C and 30.60 µg 1(1) respectively. The water quality was Class IV water or eutrophic type. Water chlorophyll-a was significantly positive with pH and TP(R(2)=0.6077 p<0.01; R(2)=0.5855 p<0.01), low correlation with water temperature (R(2)=0.0566 p>0.05). lg (Y(Chl a)was significantly positive with lg(X(TP))(R(2)=0.5176 p<0.01), N/P was 22 and P may be restricted.

Advances in medical polyesters for vascular tissue engineering.

Blood vessels are highly dynamic and complex structures with a variety of physiological functions, including the transport of oxygen, nutrients, and metabolic wastes. Their normal functioning involves the close and coordinated cooperation of a variety of cells. However, adverse internal and external environmental factors can lead to vascular damage and the induction of various vascular diseases, including atherosclerosis and thrombosis. This can have serious consequences for patients, and there is an urgent need for innovative techniques to repair damaged blood vessels. Polyesters have been extensively researched and used in the treatment of vascular disease and repair of blood vessels due to their excellent mechanical properties, adjustable biodegradation time, and excellent biocompatibility. Given the high complexity of vascular tissues, it is still challenging to optimize the utilization of polyesters for repairing damaged blood vessels. Nevertheless, they have considerable potential for vascular tissue engineering in a range of applications. This summary reviews the physicochemical properties of polyhydroxyalkanoate (PHA), polycaprolactone (PCL), poly-lactic acid (PLA), and poly(lactide-co-glycolide) (PLGA), focusing on their unique applications in vascular tissue engineering. Polyesters can be prepared not only as 3D scaffolds to repair damage as an alternative to vascular grafts, but also in various forms such as microspheres, fibrous membranes, and nanoparticles to deliver drugs or bioactive ingredients to damaged vessels. Finally, it is anticipated that further developments in polyesters will occur in the near future, with the potential to facilitate the wider application of these materials in vascular tissue engineering.

Hydrogel forming microneedles loaded with VEGF and Ritlecitinib/polyhydroxyalkanoates nanoparticles for mini-invasive androgenetic alopecia treatment.

Androgenetic alopecia (AGA), the most prevalent clinical hair loss, lacks safe and effective treatments due to downregulated angiogenic genes and insufficient vascularization in the perifollicular microenvironment of the bald scalp in AGA patients. In this study, a hyaluronic acid (HA) based hydrogel-formed microneedle (MN) was designed, referred to as V-R-MNs, which was simultaneously loaded with vascular endothelial growth factor (VEGF) and the novel hair loss drug Ritlecitinib, the latter is encapsulated in slowly biodegradable polyhydroxyalkanoates (PHAs) nanoparticles (R-PHA NPs) for minimally invasive AGA treatment. The integration of HA based hydrogel alongside PHA nanoparticles significantly bolstered the mechanical characteristics of microneedles and enhanced skin penetration efficiency. Due to the biosafety, mechanical strength, and controlled degradation properties of HA hydrogel formed microneedles, V-R-MNs can effectively penetrate the skin's stratum corneum, facilitating the direct delivery of VEGF and Ritlecitinib in a minimally invasive, painless and long-term sustained release manner. V-R-MNs not only promoted angiogenesis and improve the immune microenvironment around the hair follicle to promote the proliferation and development of hair follicle cells, but also the application of MNs to the skin to produce certain mechanical stimulation could also promote angiogenesis. In comparison to the clinical drug minoxidil for AGA treatment, the hair regeneration effect of V-R-MN in AGA model mice is characterized by a rapid onset of the anagen phase, improved hair quality, and greater coverage. This introduces a new, clinically safer, and more efficient strategy for AGA treatment, and serving as a reference for the treatment of other related diseases.

Directed osteogenic differentiation of human bone marrow mesenchymal stem cells via sustained release of BMP4 from PBVHx-based nanoparticles.

Bone Morphogenetic Protein 4 (BMP4) is crucial for bone and cartilage tissue regeneration, essential in medical tissue engineering, cosmetology, and aerospace. However, its cost and degradation susceptibility pose significant clinical challenges. To enhance its osteogenic activity while reducing dosage and administration frequency, we developed a novel long-acting BMP4 delivery system using poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-3-hydroxyhexanoate) (PBVHx) nanoparticles with soybean lecithin-modified BMP4 (sBP-NPs). These nanoparticles promote directed osteogenic differentiation of human bone marrow mesenchymal stem cells (hBMSCs) through sustained BMP4 release. sBP-NPs exhibited uniform size (100-200 nm) and surface charges, with higher BMP4 entrapment efficiency (82.63 %) compared to controls. After an initial burst release within 24 h, sBP-NPs achieved 80 % cumulative BMP4 release within 20 days, maintaining levels better than control BP-NPs with unmodified BMP4. Co-incubation and nanoparticle uptake experiments confirmed excellent biocompatibility of sBP-NPs, promoting hBMSC differentiation towards osteogenic lineage with increased expression of type I collagen, calcium deposition, and ALP activity (> 20,000 U/g protein) compared to controls. Moreover, hBMSCs treated with sBP-NPs exhibited heightened expression of osteogenic genetic markers, surpassing control groups. Hence, this innovative strategy of sustained BMP4 release from sBP-NPs holds potential to revolutionize bone regeneration in minimally invasive surgery, medical cosmetology or space environments.

Proximal femoral nail versus dynamic hip screw fixation for trochanteric fractures: a meta-analysis of randomized controlled trials.

BACKGROUND: The purpose of this meta-analysis was to find out whether the proximal femoral nail was better than the dynamic hip screw in the treatment of trochanteric fractures with respect to operation time, blood transfusion, hospital stay, wound complications, number of reoperation, and mortality rate. METHODS: All randomized controlled trials comparing proximal femoral nail and dynamic hip screw in the treatment of trochanteric fractures were included. Articles and conference data were extracted by two authors independently. Data was analyzed using RevMan 5.1 version. Eight trials involving 1348 fractures were retrieved. RESULTS: Compared with DHS fixation, PFN fixation had similar operation time (95% CI: -15.28-2.40, P = 0.15). Blood loss and transfusion during perioperative time were also comparable between the two fixations (95% CI: -301.39-28.11, P = 0.10; 95% CI: -356.02-107.20, P = 0.29, resp.). Outcomes of hospital stay (95% CI: -0.62-1.01, P = 0.64), wound complication (95% CI: 0.66-1.67, P = 0.82), mortality (95% CI: 0.83-1.30, P = 0.72), and reoperation (95% CI: 0.61-1.54, P = 0.90) were all similar between the two groups. CONCLUSION: PFN fixation shows the same effectiveness as DHS fixation in the parameters measured.

A new antibacterial denitroaristolochic acid from the tubers of Stephania succifera.

A new denitroaristolochic acid, demethylaristofolin C (1), together with six known alkaloids, crebanine N-oxide (2), (-)-sukhodianine-ß-N-oxide (3), palmatine (4), corydalmine (5), dehydrocorydalmine (6), and corynoxidine (7), was isolated from the tubers of Stephania succifera. The structure of demethylaristofolin C was elucidated by spectroscopic techniques (UV, IR, 1D, and 2D NMR) and HR-ESI-MS analyses. These compounds exhibited antibacterial activities against Staphylococcus aureus and methicillin-resistant S. aureus strains in different degrees.

Comparative analysis of electronic, magnetic, catalytic properties of clusters (PS4, CrnPS4, AlnPS4, GanPS4, n = 1 ~ 3) based on density functional theory.

CONTEXT: The article presents a comparative study of the electronic, magnetic and catalytic properties of CrPS4, AlPS4, GaPS4 and their expanded structures. It is finally found that: When n = 2, 3, the internal electron mobility of the configurations is stronger than when n = 0,1. When n = 1, the five configurations, except configuration 1Cr(4), are susceptible to both electrophilic and nucleophilic reactions at the same time. The configurations are more prone to nucleophilic reactions when n = 2 and 3, and the reaction sites are mainly located on the metal atoms; the more metal atoms, the more nucleophilic reaction sites. When the M atoms in the configuration are Al and Ga atoms, there is no big difference between the contribution of metal atoms and non-metal atoms to the magnetism in the configuration, while in the configuration containing Cr atoms, the metal atoms contribute more to the magnetism and mainly originate from the d-orbitals, which has better magnetic properties and greater application value. Configuration 2Cr(4) and configuration 1Cr(2) have better catalytic and adsorption activities and are most suitable as catalysts. METHODS: In the article, based on topological principles, density functional theory, B3LYP functional and def2-tzvp basis group and Gaussian16 quantum chemistry software were used to optimise the calculations of the clusters CrPS4, AlPS4, GaPS4 and their expanded configurations, with the most stable structure selected for each cluster, and finally, with the help of Multiwfn program, the required analytical data were obtained by assisting the calculations.

Recent advances of medical polyhydroxyalkanoates in musculoskeletal system.

Infection and rejection in musculoskeletal trauma often pose challenges for natural healing, prompting the exploration of biomimetic organ and tissue transplantation as a common alternative solution. Polyhydroxyalkanoates (PHAs) are a large family of biopolyesters synthesised in microorganism, demonstrating excellent biocompatibility and controllable biodegradability for tissue remodelling and drug delivery. With different monomer-combination and polymer-types, multi-mechanical properties of PHAs making them have great application prospects in medical devices with stretching, compression, twist in long time, especially in musculoskeletal tissue engineering. This review systematically summarises the applications of PHAs in multiple tissues repair and drug release, encompassing areas such as bone, cartilage, joint, skin, tendons, ligament, cardiovascular tissue, and nervous tissue. It also discusses challenges encountered in their application, including high production costs, potential cytotoxicity, and uncontrollable particle size distribution. In conclusion, PHAs offer a compelling avenue for musculoskeletal system applications, striking a balance between biocompatibility and mechanical performance. However, addressing challenges in their production and application requires further research to unleash their full potential in tackling the complexities of musculoskeletal regeneration.

Polyhydroxyalkanoates: the natural biopolyester for future medical innovations.

Polyhydroxyalkanoates (PHAs) are a family of natural microbial biopolyesters with the same basic chemical structure and diverse side chain groups. Based on their excellent biodegradability, biocompatibility, thermoplastic properties and diversity, PHAs are highly promising medical biomaterials and elements of medical devices for applications in tissue engineering and drug delivery. However, due to the high cost of biotechnological production, most PHAs have yet to be applied in the clinic and have only been studied at laboratory scale. This review focuses on the biosynthesis, diversity, physical properties, biodegradability and biosafety of PHAs. We also discuss optimization strategies for improved microbial production of commercial PHAs via novel synthetic biology tools. Moreover, we also systematically summarize various medical devices based on PHAs and related design approaches for medical applications, including tissue repair and drug delivery. The main degradation product of PHAs, 3-hydroxybutyrate (3HB), is recognized as a new functional molecule for cancer therapy and immune regulation. Although PHAs still account for only a small percentage of medical polymers, up-and-coming novel medical PHA devices will enter the clinical translation stage in the next few years.

Biomimetic natural biomaterials for tissue engineering and regenerative medicine: new biosynthesis methods, recent advances, and emerging applications.

Biomimetic materials have emerged as attractive and competitive alternatives for tissue engineering (TE) and regenerative medicine. In contrast to conventional biomaterials or synthetic materials, biomimetic scaffolds based on natural biomaterial can offer cells a broad spectrum of biochemical and biophysical cues that mimic the in vivo extracellular matrix (ECM). Additionally, such materials have mechanical adaptability, microstructure interconnectivity, and inherent bioactivity, making them ideal for the design of living implants for specific applications in TE and regenerative medicine. This paper provides an overview for recent progress of biomimetic natural biomaterials (BNBMs), including advances in their preparation, functionality, potential applications and future challenges. We highlight recent advances in the fabrication of BNBMs and outline general strategies for functionalizing and tailoring the BNBMs with various biological and physicochemical characteristics of native ECM. Moreover, we offer an overview of recent key advances in the functionalization and applications of versatile BNBMs for TE applications. Finally, we conclude by offering our perspective on open challenges and future developments in this rapidly-evolving field.

Transient embolization with microspheres of polyhydroxyalkanoate renders efficient adenoviral transduction of pancreatic capillary in vivo.

BACKGROUND: Our previous study showed an efficient targeting of islets of Langerhans by adenoviral injection via the celiac trunk. Unexpectedly, none of the endothelial cells was infected given the direct contact between adenoviruses and the capillary wall. The present study intended to provide an efficient approach for adenoviral targeting of the microcapillary endothelial cells in the pancreas. METHODS: We prepared microspheres of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) with a size comparable to the diameter of capillary (5-10 µm). Scanning electron microscopy was applied to verify that adenoviruses carrying a green fluorescence protein gene were complexed with PHBHHx-microspheres after 30 min of co-incubation. The complexes were then injected into the pancreas of mice via the celiac trunk. RESULTS: Approximately 40% of endothelial cells in the pancreas were labeled 5 days after surgery. Islet cells were labeled occasionally, whereas labeling of the acinar and ductal tissues was barely detectable. Endothelium targeting was inefficient in other internal organs. Consistent with the reported superior tissue compatibility of PHBHHx, no discernable microspheres were found in all of the organs examined. Furthermore, splenocyte activation was dampened when adenoviruses were complexed with the microspheres. CONCLUSIONS: The present study has established an approach for efficient pancreatic capillary targeting by using microsphere-adenoviral complexes. This procedure could be invaluable for the treatment of capillary-related diseases.

catena-Poly[[(p-toluene-sulfonato-κO)silver(I)]-µ-1,3-bis-(pyridin-4-yl)propane-κ(2)N:N'].

In the title compound, [Ag(C(7)H(7)O(3)S)(C(13)H(14)N(2))](n), the Ag(I) ion is coordinated in a T-shape by two N atoms from two symmetry-related 1,3-bis-(pyridin-4-yl)propane ligands and one O atom from a p-toluene-sulfonate ligand, forming a one-dimensional zigzag chain along [001]. In the crystal, weak C-H⋯O hydrogen bonds and weak Ag⋯Ag inter-actions [3.2628 (5) Å] are observed.

Correlation between C-reactive protein/albumin ratio and prognosis in patients with lung adenocarcinoma.

OBJECTIVE: This study was performed to examine the relationship between the C-reactive protein/albumin ratio (CAR) and the prognosis of patients with lung adenocarcinoma and thus provide a reference for evaluating the prognosis of lung adenocarcinoma. METHODS: The clinical data of 130 patients with lung adenocarcinoma were retrospectively collected and analyzed. The patients' overall survival (OS) time was calculated, and the factors affecting OS were statistically analyzed. RESULTS: The CAR was correlated with sex, clinical stage, brain metastasis, S100 calcium-binding protein B (S100B), interleukin 17, myelin basic protein, squamous cell carcinoma antigen (SCC-Ag), and the lymphocyte count. The median OS was significantly shorter in the high- than low-CAR group (18 vs. 64 months, respectively). The CAR, clinical stage, brain metastasis, S100B, interleukin 17, SCC-Ag, C-reactive protein, albumin, and neutrophil count affected the OS of patients with lung adenocarcinoma. The CAR and clinical stage were independent risk factors for a poor prognosis in patients with lung adenocarcinoma. CONCLUSIONS: The CAR and clinical stage are independent risk factors for OS in patients with lung adenocarcinoma.

Advances in modified hyaluronic acid-based hydrogels for skin wound healing.

Hyaluronic acid (HA) is a natural linear anionic polysaccharide with many unique characteristics such as excellent biocompatibility and biodegradability, native biofunctionality, hydrophilicity, and non-immunoreactivity. HA plays crucial roles in numerous biological processes, including the inflammatory response, cell adhesion, migration, proliferation, differentiation, angiogenesis, and tissue regeneration. All these properties and biological functions of HA make it an appealing material for the synthesis of biomedical hydrogels for skin wound healing. Since HA is not able to be gelate alone, it must be processed and functionalized through chemical modifications and crosslinking to generate versatile HA-based hydrogels. In recent years, different physical and chemical crosslinking strategies for HA-based hydrogels have been developed and designed, such as radical polymerization, Schiff-base crosslinking, enzymatic crosslinking, and dynamic covalent crosslinking, and they have broad and promising applications in skin wound healing and tissue engineering. In this review, we focus on chemical modification and crosslinking strategies for HA-based hydrogels, aiming to provide an overview of the latest advances in the development of HA-based hydrogels for skin wound healing. We summarize and propose feasible measures for the application of HA-based hydrogels for skin treatment, and discuss future application trends, which may ultimately promote HA-based hydrogels as a promising biomaterial for clinical applications.