RESUMEN
BACKGROUND: Sweat, as an easily accessible bodily fluid, is enriched with a lot of physiological and health information. A portable and wearable sweat sensor is an important device for an on-body health monitoring. However, there are only few such devices to monitor sweat. Based on the fact that sweat is mainly composed of moisture and salt which is much more abundant than other trace ions in sweat, a new route is proposed to realize wearable sweat sensors using CdSSe nanowire-chips coated with a polyimide (PI) membrane. RESULTS: Firstly, the composition-graded CdS1-xSex (x = 0-1) nanowire-chip based sensor shows good photo-sensitivity and stress sensitivity which induces linear humidity dependent conductivity. This indicates good moisture response with a maximum responsivity (dI/I) 244% at 80% relative humidity (RH) even in the dark. Furthermore, the linear current decrease with salt increase illustrates the chip sensor has a good salt-sensing ability with the best salt dependent responsivity of 80%, which guarantees the high prediction accuracy in sweat sensing. The sensor current is further proven to nonlinearly correlate to the amount of sweat with excellent stability, reproducibility and recoverability. The wearable sweat sensor is finally applied on-body real-time sweat analysis, showing good consistence with the body status during indoor exercise. CONCLUSIONS: These results suggest that this CdSSe nanowire-chip based PI-coated integrated sensor, combined with inorganic and organic functional layers, provides a simple and reliable method to build up diverse portable and wearable devices for the applications on healthcare and athletic status.
Asunto(s)
Compuestos de Cadmio/química , Nanocables/química , Análisis de Secuencia por Matrices de Oligonucleótidos/instrumentación , Selenio/química , Sulfuros/química , Sudor/química , Silicatos de Aluminio/química , Técnicas Biosensibles/instrumentación , Técnicas Electroquímicas/instrumentación , Electrodos , Humanos , Humedad , Procesos Fotoquímicos , Resinas Sintéticas/química , Cloruro de Sodio/análisis , Dispositivos Electrónicos VestiblesRESUMEN
To date, the common quality characterizations for MoS2 are inefficient or cause irreversible damage to the samples, which have limited scalability and low throughput. Here, we propose a visualized and nondestructive approach to evaluate the quality of MoS2 based on the PCA machine learning method. Through PCA processing of PL mapping, the CVD grown MoS2 with different edge defect densities can be well distinguished. Furthermore, six twin GBs along the sulfur zigzag direction of the six pointed MoS2 stars are also successfully identified. To verify the correctness of the identification results, we measured the lifetime mapping and thermal expansion coefficient of the synthesized MoS2 samples. It is found that the high quality MoS2 samples have a shorter carrier lifetime (â¼0.291 ns) and lower thermal expansion coefficient (â¼2.03 × 10-5K-1). Therefore, our work offers a new approach to evaluate the quality of MoS2 to drive their practical application.
RESUMEN
Photoresponsivity is a fundamental parameter used to quantify the ability of photoelectric conversion of a photodetector device. High-responsivity photodetectors are essential for numerous optoelectronic applications. Due to the strong light-matter interactions and the high carrier mobility, two-dimensional (2D) materials are promising candidates for the next-generation photodetectors. However, poor light absorption, lack of photoconductive gain, and the interfacial recombination lead to the relatively low responsivity of 2D photodetectors. The photogating effect, which extends the lifetime of photoexcited carriers, provides a simple approach to enhance responsivity in photodetector devices. Here, the O2 plasma treatment introduced surface traps on the SnS2 surface, leading to a gate-tunable photogating effect in SnS2/MoS2 heterojunctions. The heterojunction device exhibits an ultrahigh responsibility of up to 28 A/W. Moreover, the photodetector possesses a wide spectral photoresponse spanning from 300 to 1100 nm and a high specific detectivity (D*) of 4 × 1011 Jones under a 532 nm laser at VDS = 1 V. These results demonstrate that O2 plasma treatment is an efficient and simple avenue to achieve photogating effects, which can be employed to enhance the performance of van der Waals heterostructure photodetector devices and make them suitable for future integration into advanced electronic and optoelectronic systems.
RESUMEN
Although anisotropic two-dimensional materials have attracted great scientific interest, the anisotropy of those materials is limited to particular crystallographic directions. Herein, with dimension confining, MoS2 nanoscrolls are successfully fabricated by a rolling-up process after dropping an ethanol-water solution on a chemical vapor deposition-grown MoS2 monolayer. The anisotropic vibrational and optical properties are systematically studied by angle-resolved polarized spectroscopy, including Raman, photoluminescence, and reflection measurements. Upon comparing the photoluminescence results between MoS2 nanoscrolls and nanosheets, an obvious PL quenching phenomenon is observed, indicating the efficient separation of photon-induced carriers. Moreover, the time-resolved PL test identifying the lifetime of the carriers is decreased to 303 ps in the nanoscrolls, indicating a higher carrier-transfer efficiency. In summary, our work demonstrates the strong anisotropic optical properties of MoS2 nanorolls, showing the nanoscrolls are a promising candidate for the fabrication of multifunctional devices.
RESUMEN
The unique optoelectronic properties of layered van der Waals (vdW) heterostructures open up exciting opportunities for high-performance photodetectors. Self-driven photodetectors are desirable for reducing power consumption and minimizing the device size. Here, a semiconductor-insulator-semiconductor-type multistacking WSe2/graphene/h-BN/MoS2 vdW heterostructure is demonstrated to realize an enhanced self-powered photodetector with a high on-off current ratio of about 1.2 × 105 and a high photoresponsivity of 3.6 A/W without applying bias, which is the highest photoresponsivity ever reported for self-powered photodetectors. Because of the difference in the Fermi level, a built-in electrical field is formed at the WSe2/graphene junction, where the photoexcited electrons and holes can be efficiently separated and the carriers can easily tunnel through the MoS2/h-BN junction driven by the enhanced potential. Therefore, the enhanced self-powered photodetection is attributable to highly efficient carrier tunneling through large h-BN electron barriers. By comparison, when the stacking sequence is changed to make WSe2/MoS2 p-n heterojunctions lay on graphene/h-BN, the self-powered photocurrent is still generated because of the type-II band alignment, which exhibits lower but still relevant values with a light on/off ratio of â¼8 × 103 and a photoresponsivity of â¼2.39 A/W. The efficient enhancement demonstrates that multistacking heterostructures significantly elevate the performance of self-powered photodetectors, providing a feasible route to develop high-performance self-powered optoelectronic devices and extend their applications in integrated optoelectronic systems.
RESUMEN
Polarization-sensitive photodetectors are highly desirable for high-performance optical signal capture and stray light shielding in order to enhance the capability for detection and identification of targets in dark, haze, and other complex environments. Usually, filters and polarizers are utilized for conventional devices to achieve polarization-sensitive detection. Herein, to simplify the optical system, a two-dimensional self-powered polarization-sensitive photodetector is fabricated based on a stacked GeSe/MoS2 van der Waals (vdW) heterojunction which facilitates efficient separation and transportation of the photogenerated carriers because of type-II band alignment. Accordingly, a high-performance self-powered photodetector is achieved with merits of a very large on-off ratio photocurrent at zero bias of currently 104 and a high responsivity (Rλ) of 105 mA/W with an external quantum efficiency of 24.2%. Furthermore, a broad spectral photoresponse is extended from 380 to 1064 nm owing to the high absorption coefficient in a wide spectral region. One of the key benefits from these highly anisotropic orthorhombic structures of layered GeSe is self-powered polarization-sensitive detection with a peak/valley ratio of up to 2.95. This is realized irradiating with a 532 nm wavelength laser with which a maximum photoresponsivity of up to 590 mA/W is reached when the input polarization is parallel to the armchair direction. This work provides a facile route to fabricate self-powered polarization-sensitive photodetectors from GeSe/MoS2 vdW heterojunctions for integrated optoelectronic devices.
RESUMEN
Monodispersed FePt nanoparticles are synthesized by reduction of iron(II) acetylacetonate and platinum(II) acetylacetonate with 1,2-hexadecanediol as the reducing reagent in the polyol process. As-prepared FePt nanoparticles are chemically disordered with fcc phase. Transmission electron microscopy (TEM) images show a self-assembled particle array with an average particle size of 3 nm and a standard deviation about 10%. The transformation from chemically disordered fcc to chemically ordered L10 phase is achieved by annealing at 650 degrees C for 30 min in Ar atmosphere where the oxygen level is less than 1 ppm. Magnetic hysteresis measurements show a coercivity of 9.0 kOe at 293K, and 16.7 kOe at 5 K for the annealed FePt nanoparticles.
RESUMEN
The directed self-assembly of block copolymer (BCP) offers a new route to perfect nanolithographic patterning at sub-50 nm length scale with molecular scale precision. We have explored the feasibility of using the BCP approach versus the conventional electron beam (e-beam) lithography to create highly dense dot patterns for bit-patterned media (BPM) applications. Cylinder-forming poly(styrene-b-methyl methacrylate) (PS-b-PMMA) directly self-assembled on a chemically prepatterned substrate. The nearly perfect hexagonal arrays of perpendicularly oriented cylindrical pores at a density of approximately 1 Terabit per square inch (Tb/in.(2)) are achieved over an arbitrarily large area. Considerable gains in the BCP process are observed relative to the conventional e-beam lithography in terms of the dot size variation, the placement accuracy, the pattern uniformity, and the exposure latitude. The maximum dimensional latitude in the cylinder-forming BCP patterns and the maximum skew angle that the BCP can tolerate have been investigated for the first time. The dimensional latitude restricts the formation of more than one lattice configuration in certain ranges. More defects in BCP patterns are observed when using low molecular weight BCP materials or on non-hexagonal prepatterns due to the dimensional latitude restriction. Finally, the limitations and challenges in the BCP approach that are associated with BPM applications will be briefly discussed.
RESUMEN
It is demonstrated that ultrafast generation of ferromagnetic order can be achieved by driving a material from an antiferromagnetic to a ferromagnetic state using femtosecond optical pulses. Experimental proof is provided for chemically ordered FeRh thin films. A subpicosecond onset of induced ferromagnetism is followed by a slower increase over a period of about 30 ps when FeRh is excited above a threshold fluence. Both experiment and theory provide evidence that the underlying phase transformation is accompanied, but not driven, by a lattice expansion. The mechanism for the observed ultrafast magnetic transformation is identified to be the strong ferromagnetic exchange mediated via Rh moments induced by Fe spin fluctuations.