RESUMEN
Progress has been made in using human serum albumin nanoparticles (HSAPs) as promising colloidal carrier systems for early detection and targeted treatment of cancer and other diseases. Despite this success, there is a current lack of multi-functional HSAP hybrids that offer combinational therapies. The size of the HSAPs has crucial importance on drug loading and in vivo performance and has previously been controlled via manipulation of pH and cross-linking parameters. Gold nanomaterials have also gained attention for medicinal use due to their ability to absorb near-infrared light, thus offering photothermal capabilities. In this study, the desolvation and cross-linking approach was employed to encapsulate gold nanorods, nanoparticles, and nanoshells into HSAPs. Incorporation of gold nanomaterials caused some changes in HSAP sizes, but the general size trends remained. This encasement strategy facilitated size-controlled HSAPs, in the range of 100-300 nm, loaded with gold nanostructures; providing composite particles which incorporate photothermally active components.
Asunto(s)
Oro/química , Nanopartículas del Metal/química , Nanocápsulas/química , Nanotubos/química , Neoplasias/tratamiento farmacológico , Albúmina Sérica/química , Oro/farmacología , Humanos , Nanopartículas del Metal/ultraestructura , Nanocápsulas/ultraestructura , Nanotubos/ultraestructura , Tamaño de la Partícula , Albúmina Sérica/farmacologíaRESUMEN
This paper reports the first step toward the development of a glucose biosensor based on Raman spectroscopy and a photonic crystal fiber (PCF) probe. Historically, it has been very challenging to detect glucose directly by Raman spectroscopy due to its inherently small Raman scattering cross-section. In this work, we report the first quantitative glucose Raman detection in the physiological concentration range (0-25 mM) with a low laser power (2 mW), a short integration time (30 s), and an extremely small sampling volume (~50 nL) using the highly sensitive liquid-filled PCF probe. As a proof of concept, we also demonstrate the molecular specificity of this technique in the presence of a competing sugar, such as fructose. High sensitivity, flexibility, reproducibility, low cost, small sampling volume, and in situ remote sensing capability make PCF a very powerful platform for potential glucose detection based on Raman spectroscopy.
Asunto(s)
Técnicas Biosensibles/métodos , Tecnología de Fibra Óptica , Glucosa/análisis , Sondas Moleculares/química , Fotones , Espectrometría Raman , Tecnología de Fibra Óptica/instrumentación , Rayos Láser , Espectrometría Raman/instrumentaciónRESUMEN
We report on the synthesis and characterization of Sn-doped hematite nanowires and nanocorals as well as their implementation as photoanodes for photoelectrochemical water splitting. The hematite nanowires were prepared on a fluorine-doped tin oxide (FTO) substrate by a hydrothermal method, followed by high temperature sintering in air to incorporate Sn, diffused from the FTO substrate, as a dopant. Sn-doped hematite nanocorals were prepared by the same method, by adding tin(IV) chloride as the Sn precursor. X-ray photoelectron spectroscopy analysis confirms Sn(4+) substitution at Fe(3+) sites in hematite, and Sn-dopant levels increase with sintering temperature. Sn dopant serves as an electron donor and increases the carrier density of hematite nanostructures. The hematite nanowires sintered at 800 °C yielded a pronounced photocurrent density of 1.24 mA/cm(2) at 1.23 V vs RHE, which is the highest value observed for hematite nanowires. In comparison to nanowires, Sn-doped hematite nanocorals exhibit smaller feature sizes and increased surface areas. Significantly, they showed a remarkable photocurrent density of 1.86 mA/cm(2) at 1.23 V vs RHE, which is approximately 1.5 times higher than that of the nanowires. Ultrafast spectroscopy studies revealed that there is significant electron-hole recombination within the first few picoseconds, while Sn doping and the change of surface morphology have no major effect on the ultrafast dynamics of the charge carriers on the picosecond time scales. The enhanced photoactivity in Sn-doped hematite nanostructures should be due to the improved electrical conductivity and increased surface area.
Asunto(s)
Electroquímica/métodos , Compuestos Férricos/química , Nanotecnología/métodos , Fotoquímica/métodos , Estaño/química , Agua/química , Electrones , Flúor/química , Luz , Microscopía Electrónica de Rastreo/métodos , Nanocables/química , Temperatura , Compuestos de Estaño/químicaRESUMEN
This work reports a facile method for preparing highly photoactive α-Fe(2)O(3) films as well as their implementation as photoanodes for water oxidation. Transparent α-Fe(2)O(3) films were prepared by a new deposition-annealing (DA) process using nontoxic iron(III) chloride as the Fe precursor, followed by annealing at 550 °C in air. Ti-doped α-Fe(2)O(3) films were prepared by the same method, with titanium butoxide added as the Ti precursor. Impedance measurements show that the Ti-dopant serves as an electron donor and increases the donor density by 2 orders of magnitude. The photoelectrochemical performance of undoped and Ti-doped α-Fe(2)O(3) photoanodes was characterized and optimized through controlled variation of the Fe and Ti precursor concentration, annealing conditions, and the number of DA cycles. Compared to the undoped sample, the photocurrent onset potential of Ti-doped α-Fe(2)O(3) is shifted about 0.1-0.2 V to lower potential, thus improving the photocurrent and incident photon to current conversion efficiency (IPCE) at lower bias voltages. Significantly, the optimized Ti-doped α-Fe(2)O(3) film achieved the highest photocurrent density (1.83 mA/cm(2)) and IPCE values at 1.02 V vs RHE for α-Fe(2)O(3) photoanode. The enhanced photocurrent is attributed to the improved donor density and reduced electron-hole recombination at the time scale beyond a few picoseconds, as a result of Ti doping.
Asunto(s)
Compuestos Férricos/química , Agua/química , Microscopía Electrónica de Rastreo , Oxidación-Reducción , FotoquímicaRESUMEN
Direct experimental observation of spontaneous electron enrichment of metal d orbitals in a new transition metal oxide heterostructure with nanoscale dimensionality is reported. Aqueous chemical synthesis and vapor phase deposition are combined to fabricate oriented arrays of high-interfacial-area hetero-nanostructures comprised of titanium oxide and iron oxide nanomaterials. Synchrotron-based soft X-ray spectroscopy techniques with high spectral resolution are utilized to directly probe the titanium and oxygen orbital character of the interfacial region's occupied and unoccupied densities of states. These data demonstrate the interface to possess electrons in Ti 3d bands and an emergent degree of orbital hybridization that is absent in parent oxide reference crystals. The carrier dynamics of the hetero-nanostructures are studied by ultrafast transient absorption spectroscopy, which reveals the presence of a dense manifold of states, the relaxations from which exhibit multiple exponential decays whose magnitudes depend on their energetic positions within the electronic structure.
Asunto(s)
Nanopartículas del Metal/química , Nanotecnología/métodos , Óxidos/química , Anisotropía , Cristalización , Electroquímica/métodos , Electrones , Compuestos Férricos/química , Metales/química , Microscopía Electrónica de Transmisión/métodos , Oxígeno/química , Espectrofotometría/métodos , Sincrotrones , Titanio/química , Rayos XRESUMEN
This review article provides an overview of recent advances in the study and understanding of dynamics of excitons in semiconductor nanocrystals (NCs) or quantum dots (QDs). Emphasis is placed on the relationship between exciton dynamics and optical properties, both linear and nonlinear. We also focus on the unique aspects of exciton dynamics in semiconductor NCs as compared to those in bulk crystals. Various experimental techniques for probing exciton dynamics, particularly time-resolved laser methods, are reviewed. Relevant models and computational studies are also briefly presented. By comparing different materials systems, a unifying picture is proposed to account for the major dynamic features of excitons in semiconductor QDs. While the specific dynamic processes involved are material-dependent, key processes can be identified for all the materials that include electronic dephasing, intraband relaxation, trapping, and interband recombination of free and trapped charge carriers (electron and hole). Exciton dynamics play a critical role in the fundamental properties and functionalities of nanomaterials of interest for a variety of applications including optical detectors, solar energy conversion, lasers, and sensors. A better understanding of exciton dynamics in nanomaterials is thus important both fundamentally and technologically.
RESUMEN
This work examines the effect of Zr(4+) ions on the physical and photoelectrochemical (PEC) properties of hematite (α-Fe2O3) nanorod arrays grown in an aqueous solution containing zirconyl nitrate (ZrO(NO3)2) as a dopant precursor. The concentration of ZrO(NO3)2 in the precursor solution influenced both the film thickness and the Zr(4+) concentration in the resulting films. Zr doping was found to enhance the photocurrent for water splitting; the highest photocurrent at 1.0 V vs. Ag/AgCl (0.33 mA cm(-2)) for the Zr-doped α-Fe2O3 film was approximately 7.2 times higher than that for the undoped film (0.045 mA cm(-2)). Additionally, the incident photon to current efficiency (IPCE) at 360 nm and 1.23 V vs. the reversible hydrogen electrode (RHE) increased from 3.8% to 13.6%. Ultrafast transient absorption spectroscopy suggests that Zr doping may influence PEC performance by reducing the rate of electron-hole recombination.
RESUMEN
Ultrafast exciton dynamics in one-dimensional (1D) silicon nanowires (SiNWs) have been investigated using femtosecond transient absorption techniques. A strong transient bleach feature was observed from 500 to 770 nm following excitation at 470 nm. The bleach recovery was dominated by an extremely fast feature that can be fit to a triple exponential with time constants of 0.3, 5.4, and â¼75 ps, which are independent of probe wavelength. The amplitude and lifetime of the fast component were excitation intensity-dependent, with the amplitude increasing more than linearly and the lifetime decreasing with increasing excitation intensity. The fast decay is attributed to exciton-exciton annihilation upon trap state saturation. The threshold for observing this nonlinear process is sensitive to the porosity and surface properties of the sample. To help gain insight into the relaxation pathways, a four-state kinetic model was developed to explain the main features of the experimental dynamics data. The model suggests that after initial photoexcitation, conduction band (CB) electrons become trapped in the shallow trap (ST) states within 0.5 ps and are further trapped into deep trap (DT) states within 4 ps. The DT electrons finally recombine with the hole with a time constant of â¼500 ps, confirming the photophysical processes to which we assigned the decays.
RESUMEN
Facile and reproducible SERS signals from Shewanella oneidensis were obtained utilizing silver nanoparticles (AgNPs) and silver nanowires (AgNWs). Additionally, SERS images identify the distribution of SERS hot-spots. One important observation is the synergistically enhanced SERS signal when AgNPs and AgNWs are used in conjunction, due to constructively enhanced electromagnetic field.