RESUMEN
Information on the miscibility of different polymers A and B on a molecular level is important in many ways. However, along the traditional lines this knowledge is difficult and time consuming to achieve. The current study presents a simple alternative, based on the determination of the intrinsic viscosities (specific hydrodynamic volume of isolated coils) for blend solutions in a common solvent. In the case of incompatible polymers, isolated coils contain one macromolecule only, either A or B. In contrast, compatible polymers form mixed isolated coils, because of favorable interactions. The present investigation was carried out for the system water/poly(ethylene oxide)/poly(sodium 4-polystyrenesulfonate), for which the reason of compatibility lies in the formation Na+ bridges between the sulfonate groups of the polyelectrolyte and the OH groups of the poly(ethylene oxide). Zero shear viscosities were measured as a function of polymer concentration for blends of different compositions and modeled quantitatively by means of relations yielding the excess intrinsic viscosities ε (zero in the case of incompatibility) and viscometric interaction parameters. Particular attention is being paid to the role the molar masses of the polymers play for the resulting ε values.
RESUMEN
Conventional pathogenic bacteria-detection methods are lab-bound, time-consuming and need trained personnel. Microelectrodes can be used to recognize harmful microorganisms by dielectric impedance spectroscopy. However, crucial for this spectroscopy method are the spatial dimensions and layout of the electrodes, as the corresponding distribution of the electric field defines the sensor system parameters such as sensitivity, SNR, and dynamic range. Therefore, a variety of sensor models are created and evaluated. FEM simulations in 2D and 3D are conducted for this impedimetric sensor. The authors tested differently shaped structures, verified the linear influence of the excitation amplitude and developed a mathematical concept for a quality factor that practically allows us to distinguish arbitrary sensor designs and layouts. The effect of guard electrodes blocking outer influences on the electric field are investigated, and essential configurations are explored. The results lead to optimized electronic sensors in terms of geometrical dimensions. Possible material choices for real sensors as well as design and layout recommendations are presented.
Asunto(s)
Bacterias/aislamiento & purificación , Técnicas Biosensibles , Espectroscopía Dieléctrica , Microelectrodos , Impedancia EléctricaRESUMEN
INTRODUCTION: Nonunion is a common complication after intramedullary nailing of subtrochanteric femoral fractures. A more detailed knowledge, particularly of avoidable risk factors for subtrochanteric fracture nonunion, is thus desired to develop strategies for reducing nonunion rates. The aim of the present study therefore was to analyse a wide range of parameters as potential risk factors for nonunion after intramedullary nailing of subtrochanteric fractures. MATERIALS AND METHODS: Seventy-four patients who sustained a subtrochanteric fracture and were treated by femoral intramedullary nailing at a single level 1 trauma centre within a 6-year period were included in this study. A total of 15 patient-related, fracture-related, surgery-related, mechanical and biological parameters were analysed as potential risk factors for nonunion. Furthermore, the accuracy of each of these parameters to predict nonunion was calculated. RESULTS: Nonunion occurred in 17 of 74 patients (23.0%). Of the 15 potential risk factors analysed, only 3 were found to have a significant effect on the nonunion rate (p < 0.05): postoperative varus malalignment, postoperative lack of medial cortical support and autodynamisation of the nail within the first 12 weeks post-surgery. Accuracy of each of these 3 parameters to predict nonunion was > 0.70. Furthermore, the nonunion rate significantly increased with the number of risk factors (no risk factor: 2.9%, one risk factor: 23.8%, two risk factors: 52.9%, and three risk factors: 100% [Chi-square test, p = 0.001)]. CONCLUSIONS: Our study indicates that intraoperative correction of varus malalignment and restoration of the medial cortical support are the most critical factors to prevent nonunion after intramedullary nailing of subtrochanteric femoral fractures. In addition, autodynamisation of the nail within the first 3 months post-surgery is a strong predictor for failure and should result in revision surgery.
Asunto(s)
Fijación Intramedular de Fracturas , Fracturas de Cadera , Complicaciones Posoperatorias/epidemiología , Estudios de Cohortes , Fijación Intramedular de Fracturas/efectos adversos , Fijación Intramedular de Fracturas/estadística & datos numéricos , Fracturas de Cadera/epidemiología , Fracturas de Cadera/cirugía , Humanos , Factores de Riesgo , Insuficiencia del TratamientoRESUMEN
BACKGROUND: A chromosomal locus at 4q32.1 has been genome-wide significantly associated with coronary artery disease risk. The locus encompasses GUCY1A3, which encodes the α1 subunit of the soluble guanylyl cyclase (sGC), a key enzyme in the nitric oxide/cGMP signaling pathway. The mechanism linking common variants in this region with coronary risk is not known. METHODS: Gene expression and protein expression were analyzed with quantitative polymerase chain reaction and immunoblotting, respectively. Putative allele-specific transcription factors were identified with in silico analyses and validated via allele-specific quantification of antibody-precipitated chromatin fractions. Regulatory properties of the lead risk variant region were analyzed with reporter gene assays. To assess the effect of zinc finger E box-binding homeobox 1 transcription factor (ZEB1), siRNA-mediated knockdown and overexpression experiments were performed. Association of GUCY1A3 genotype and cellular phenotypes was analyzed with vascular smooth muscle cell migration assays and platelet aggregation analyses. RESULTS: Whole-blood GUCY1A3 mRNA levels were significantly lower in individuals homozygous for the lead (rs7692387) risk variant. Likewise, reporter gene assays demonstrated significantly lower GUCY1A3 promoter activity for constructs carrying this allele. In silico analyses located a DNase I hypersensitivity site to rs7692387 and predicted binding of the transcription factor ZEB1 rather to the nonrisk allele, which was confirmed experimentally. Knockdown of ZEB1 resulted in more profound reduction of nonrisk allele promoter activity and a significant reduction of endogenous GUCY1A3 expression. Ex vivo-studied platelets from homozygous nonrisk allele carriers displayed enhanced inhibition of ADP-induced platelet aggregation by the nitric oxide donor sodium nitroprusside and the phosphodiesterase 5 inhibitor sildenafil compared with homozygous risk allele carriers. Moreover, pharmacological stimulation of sGC led to reduced migration only in vascular smooth muscle cells homozygous for the nonrisk allele. In the Hybrid Mouse Diversity Panel, higher levels of GUCY1A3 expression correlated with less atherosclerosis in the aorta. CONCLUSIONS: Rs7692387 is located in an intronic site that modulates GUCY1A3 promoter activity. The transcription factor ZEB1 binds preferentially to the nonrisk allele, leading to an increase in GUCY1A3 expression, higher sGC levels, and higher sGC activity after stimulation. Finally, human and mouse data link augmented sGC expression to lower risk of atherosclerosis.
Asunto(s)
Enfermedad de la Arteria Coronaria/genética , Guanilil Ciclasa Soluble/genética , Alelos , Plaquetas/metabolismo , Línea Celular , Movimiento Celular/efectos de los fármacos , Enfermedad de la Arteria Coronaria/patología , GMP Cíclico/metabolismo , Sitios Genéticos , Genotipo , Células HEK293 , Homocigoto , Humanos , Músculo Liso Vascular/citología , Músculo Liso Vascular/efectos de los fármacos , Músculo Liso Vascular/metabolismo , Óxido Nítrico/metabolismo , Nitroprusiato/farmacología , Agregación Plaquetaria/efectos de los fármacos , Polimorfismo de Nucleótido Simple , Regiones Promotoras Genéticas , Interferencia de ARN , ARN Mensajero/metabolismo , ARN Interferente Pequeño/metabolismo , Riesgo , Citrato de Sildenafil/farmacología , Guanilil Ciclasa Soluble/metabolismo , Factores de Transcripción/genética , Factores de Transcripción/metabolismo , Homeobox 1 de Unión a la E-Box con Dedos de Zinc/antagonistas & inhibidores , Homeobox 1 de Unión a la E-Box con Dedos de Zinc/genética , Homeobox 1 de Unión a la E-Box con Dedos de Zinc/metabolismoRESUMEN
Stimulators of the soluble guanylyl cyclase (sGC) are emerging therapeutic agents in cardiovascular diseases. Genetic alterations of the GUCY1A3 gene, which encodes the α1 subunit of the sGC, are associated with coronary artery disease. Studies investigating sGC stimulators in subjects with CAD and carrying risk-related variants in sGC are, however, lacking. Here, we functionally investigate the impact of coding GUCY1A3 variants on sGC activity and the therapeutic potential of sGC stimulators in vitro. In addition to a known loss-of-function variant, eight coding variants in GUCY1A3 were cloned and expressed in HEK 293 cells. Protein levels and dimerization capability with the ß1 subunit were analysed by immunoblotting and co-immunoprecipitation, respectively. All α1 variants found in MI patients dimerized with the ß1 subunit. Protein levels were reduced by 72 % in one variant (p < 0.01). Enzymatic activity was analysed using cGMP radioimmunoassay after stimulation with a nitric oxide (NO) donor. Five variants displayed decreased cGMP production upon NO stimulation (p < 0.001). The addition of the sGC stimulator BAY 41-2272 increased cGMP formation in all of these variants (p < 0.01). Except for the variant leading to decreased protein level, cGMP amounts reached the wildtype NO-induced level after addition of BAY 41-2272. In conclusion, rare coding variants in GUCY1A3 lead to reduced cGMP formation which can be rescued by a sGC stimulator in vitro. These results might therefore represent the starting point for discovery of novel treatment strategies for patients at risk with coding GUCY1A3 variants.
Asunto(s)
Enfermedad de la Arteria Coronaria/genética , GMP Cíclico/biosíntesis , Guanilil Ciclasa Soluble/genética , Adulto , Animales , GMP Cíclico/genética , Predisposición Genética a la Enfermedad/genética , Células HEK293 , Humanos , Immunoblotting , Inmunoprecipitación , Ratones , Persona de Mediana Edad , Mutación Missense , Reacción en Cadena de la Polimerasa , Polimorfismo de Nucleótido Simple , Pirazoles/farmacología , Piridinas/farmacología , Radioinmunoensayo , Guanilil Ciclasa Soluble/metabolismo , Adulto JovenRESUMEN
The interaction of toluene with P(MMA-ran-t-BMA) and with the corresponding homopolymers was determined via vapor pressure measurements at 30, 50 and 70 °C. A unified thermodynamic approach served for the modeling of the results. It is capable of describing the behavior of the different solutions by means of two adjustable parameters, one representing the effective number of solvent segments and the other accounting for the interactions between the components. The solvent quality of toluene passes a maximum, a minimum and another maximum upon an increase of the t-BMA content of the copolymer at all temperatures. A similar behavior is discernable from vapor pressure data of chloroform published for the same copolymers. The heats of mixing for toluene depend strongly on temperature; at 50 °C they are all endothermal with the exception of PMMA, for which the value obtained from vapor pressures at 30 °C agrees very well with published caloric data.
RESUMEN
The phase diagram of the system water/dextran (DEX)/BSA was measured as well as modeled. On the experimental side, cloud points were determined and the coexisting phases were analyzed. The theoretical calculations use an approach capable of describing solutions of chain polymers and of globular proteins with the same formalism. The required thermodynamic input comes from experiments concerning the binary subsystems, except for the polymer blend for which one interaction parameter had to be adjusted. Both sources of information yield the same essential features: the existence of a large composition area of immiscibility, starting from the subsystem DEX/BSA and extending well into the region of dilute polymer solutions. This range is subdivided into three sections: one two-phase area at high polymer content, a two-phase area at low polymer content, and a three-phase region located in between. Measured and calculated phase diagrams match qualitatively; the reasons for the quantitative discrepancies are being discussed.
Asunto(s)
Dextranos/química , Albúmina Sérica Bovina/química , Animales , Bovinos , Polímeros/química , Soluciones/químicaRESUMEN
Dilute solutions of the sodium salt of polystyrene sulfonic acid (PSS-Na) were measured viscometrically as a function of composition in aqueous solvents of different salinity, where the extra salt was either NaCl or CaCl2. Such experiments yield {η}, the generalized intrinsic viscosities (hydrodynamic specific volume) of the polyelectrolyte for arbitrary polymer concentrations, c. In the limit of infinite dilution {η} becomes identical to the intrinsic viscosity [η]. For NaCl {η} decreases monotonously with rising c, whereas maxima are passed in the case of CaCl2. Condensing c and the concentration of extra salt in the mixed solvent into a single variable enables the establishment of predictive master curves. The viscometrically observed changes in the spatial extension of the individual polymer coils are discussed in light of the corresponding thermodynamic information.
Asunto(s)
Poliestirenos/química , Cloruro de Calcio/química , Electrólitos/química , Cloruro de Sodio/química , Termodinámica , Viscosidad , Agua/químicaRESUMEN
The plant pathogen Fusarium graminearum is a proficient producer of mycotoxins and other in part still unknown secondary metabolites, some of which might act as virulence factors on wheat. The PKS15 gene is expressed only in planta, so far hampering the identification of an associated metabolite. Here we combined the activation of silent gene clusters by chromatin manipulation (kmt6) with blocking the metabolic flow into the competing biosynthesis of the two major mycotoxins deoxynivalenol and zearalenone. Using an untargeted metabolomics approach, two closely related metabolites were found in triple mutants (kmt6 tri5 pks4,13) deficient in production of the major mycotoxins deoxynivalenol and zearalenone, but not in strains with an additional deletion in PKS15 (kmt6 tri5 pks4,13 pks15). Characterization of the metabolites, by LC-HRMS/MS in combination with a stable isotope-assisted tracer approach, revealed that they are likely hybrid polyketides comprising a polyketide part consisting of malonate-derived acetate units and a structurally deviating part. We propose the names gramiketide A and B for the two metabolites. In a biological experiment, both gramiketides were formed during infection of wheat ears with wild-type but not with pks15 mutants. The formation of the two gramiketides during infection correlated with that of the well-known virulence factor deoxynivalenol, suggesting that they might play a role in virulence.
RESUMEN
Based on early measurements of J. J. Hermans and co-workers (D. T. F. Pals, J. J. Hermans, Recl. Trav. Chim. Pays-Bas 1952, 71, 513-520; D. T. F. Pals, J. J. Hermans, J. Polym. Sci. 1950, 5, 733-734; D. T. F. Pals, J. J. Hermans, J. Polym. Sci. 1948, 3, 897-898), the present contribution demonstrates how primary data should be evaluated in order to obtain reliable intrinsic viscosities. This procedure yields detailed information on the changes of the intrinsic viscosities and of the corresponding viscometric interaction parameters caused by an increasing salinity of water. Both quantities decline from a maximum value in the pure solvent to a minimum value, which is approached in the limit of sufficiently high salt concentrations, and can be modeled quantitatively by means of a Boltzmann sigmoid. Particular attention is paid to the significance of results obtained by means of the method of isoionic dilution, proposed by J. J. Hermans and co-workers.
RESUMEN
The widespread occurrence of heparin contaminated with oversulfated chrondroitin sulfate (OSCS) in 2008 initiated a comprehensive revision process of the Pharmacopoeial heparin monographs and stimulated research in analytical techniques for the quality control of heparin. Here, a set of 177 heparin samples from the market in 2008 as well as pure heparin sodium spiked with defined amounts of OSCS and DS were used to evaluate established and novel methods for the quality control of heparin. Besides (1)H nuclear magnetic resonance spectroscopy (NMR), the assessment included two further spectroscopic methods, i.e., attenuated total reflection-infrared spectroscopy (ATR-IR) and Raman spectroscopy, three coagulation assays, i.e., activated partial thromboplastin time (aPTT) performed with both sheep and human plasma and the prothrombin time (PT), and finally two novel purity assays, each consisting of an incubation step with heparinase I followed by either a fluorescence measurement (Inc-PolyH-assay) or by a chromogenic aXa-assay (Inc-aXa-assay). NMR was shown to allow not only sensitive detection, but also quantification of OSCS by using the peak-height method and a response factor determined by calibration. Chemometric evaluation of the NMR, ATR-IR, and Raman spectra by statistical classification techniques turned out to be best with NMR spectra concerning the detection of OSCS. The validity of the aPTT, the current EP assay, could be considerably improved by replacing the sheep plasma by human plasma. In this way, most of the contaminated heparin samples did not meet the novel potency limit of 180 IU/mg. However, also more than 50% of the uncontaminated samples had <180 IU/MG. In contrast to the aPTT, the PT specifically detects OSCS and other heparin mimetics (LOD 3%). About ten times more sensitive are both the Inc-PolyH-assay and the Inc-aXa-assay, two rapid and simple quantification assays for heparin mimetics. The determined OSCS contents of the heparin samples excellently correlated with those calculated from the NMR spectra. In conclusion, NMR proved to be the current spectroscopic method of choice. The two two-step-assays represent options to supplement NMR, especially as tests for the initial screening, since they detect any heparin mimetic without requiring special expertise for interpretation of the results.
Asunto(s)
Anticoagulantes/química , Contaminación de Medicamentos , Heparina/química , Animales , Anticoagulantes/metabolismo , Anticoagulantes/farmacología , Sulfatos de Condroitina/análisis , Dermatán Sulfato/análisis , Factor Xa/metabolismo , Heparina/metabolismo , Heparina/farmacología , Humanos , Espectroscopía de Resonancia Magnética/métodos , Tiempo de Tromboplastina Parcial/métodos , Tiempo de Protrombina/métodos , Control de Calidad , Ovinos , Espectrometría de Fluorescencia/métodos , Espectrofotometría Infrarroja/métodos , Espectrometría Raman/métodosRESUMEN
Hydrodynamic properties of a series of ionic polysaccharides with different charge density but the same molecular weight have been evaluated in salt-free aqueous solution and aqueous/organic solvent mixtures by means of capillary viscometry. The polyelectrolytes investigated contain quaternary ammonium salt groups, N-ethyl-N,N-dimethyl-2-hydroxypropylammonium chloride, attached to a dextran backbone. The experimental viscometric data have been plotted in terms of the Wolf method. The results show that the experimental data fit well with this model and allow the calculation of intrinsic viscosities and other hydrodynamic parameters, which provide new information about the dependence of the polyion conformation on its polyion charge density as well as on solvent composition.
RESUMEN
The viscometric behaviour of κ-carrageenan in aqueous solutions and in the presence of monovalent salts was investigated at 25⯰C. Coil, helix or double helix conformations were induced by cooling hot κ-carrageenan solutions under appropriate ionic conditions. A new viscometric approach was used for modeling the behaviour of κ-carrageenan solutions. The intrinsic viscosity, [η], is markedly changed by the presence of different monovalent salts (NaCl, NaI and CsI). In pure water, the intrinsic viscosity amounts to 48 dL·g-1. In 0.1â¯M NaCl solutions (single helix state) [η] is 6.2 dL·g-1, whereas in 0.1â¯M NaI (double helix conformation) it is approximately twice as large. In 0.1â¯M CsI (dissimilar cation and counter-ion) the intrinsic viscosity is three times larger, suggesting the formation of the associated κ-carrageenan helices. Stepwise association of κ-carrageenan helices was followed in presence of NaI/CsI mixtures of different compositions. The value of Smidsrød-Haug stiffness parameter (B) measured for κ-carrageenan in NaCl solutions is 4.47â¯×â¯10-2, higher than that of DNA (5.5â¯×â¯10-3), but lower than those reported for carboxymethyl cellulose (6.3â¯×â¯10-2), indicating that the chain conformation is moderately rigid.
Asunto(s)
Carragenina/química , Sales (Química)/química , Cloruro de Sodio/química , Soluciones/química , Agua/química , Iones/química , ViscosidadRESUMEN
Cell culture assays for therapeutic drug screening today are fully automated. Vitality of the cells is monitored by different sensors. For such a system, we propose a new reader unit, which is capable of reading two different fluorescent sensors and electrical impedance in 24-well-plates. Main goals are to reduce cost, complexity and size while achieving a similar performance as the existing reader unit. To achieve this, measurement electronics and signal paths for frequency domain fluorescence and bio-impedance measurement are combined. Central component is an integrated circuit for impedance spectroscopy. A new compact and economic optical setup is developed to read two different sensor spots on the bottom of the well. Measurement errors introduced by different components like DFT leakage, and frequency dependent signal delays are evaluated and compensated. A set of commercially available fluorescence sensor spots is used to verify the read out performance. The results are usable, with noise slightly higher than commercial readers. To verify the impedance measurement accuracy, measurements of known resistances are conducted. In the relevant impedance and frequency range for biological applications a suitable accuracy is achieved. Due to the higher sampling rate of the new reader, the higher noise can be reduced through averaging. The new system is significantly smaller and cheaper to manufacture than commercially available devices.
Asunto(s)
Técnicas Biosensibles/instrumentación , Espectrometría de Fluorescencia/instrumentación , Supervivencia Celular , Evaluación Preclínica de Medicamentos/instrumentación , Impedancia Eléctrica , Diseño de Equipo , Humanos , Concentración de Iones de Hidrógeno , Oxígeno/análisisRESUMEN
AIM: A common genetic variant at the GUCY1A3 coronary artery disease locus has been shown to influence platelet aggregation. The risk of ischaemic events including stent thrombosis varies with the efficacy of aspirin to inhibit platelet reactivity. This study sought to investigate whether homozygous GUCY1A3 (rs7692387) risk allele carriers display higher on-aspirin platelet reactivity and risk of ischaemic events early after coronary intervention. METHODS AND RESULTS: The association of GUCY1A3 genotype and on-aspirin platelet reactivity was analysed in the genetics substudy of the ISAR-ASPI registry (n = 1678) using impedance aggregometry. The clinical outcome cardiovascular death or stent thrombosis within 30 days after stenting was investigated in a meta-analysis of substudies of the ISAR-ASPI registry, the PLATO trial (n = 3236), and the Utrecht Coronary Biobank (n = 1003) comprising a total 5917 patients. Homozygous GUCY1A3 risk allele carriers (GG) displayed increased on-aspirin platelet reactivity compared with non-risk allele (AA/AG) carriers [150 (interquartile range 91-209) vs. 134 (85-194) AUâ min, P < 0.01]. More homozygous risk allele carriers, compared with non-risk allele carriers, were assigned to the high-risk group for ischaemic events (>203 AUâ min; 29.5 vs. 24.2%, P = 0.02). Homozygous risk allele carriers were also at higher risk for cardiovascular death or stent thrombosis (hazard ratio 1.70, 95% confidence interval 1.08-2.68; P = 0.02). Bleeding risk was not altered. CONCLUSION: We conclude that homozygous GUCY1A3 risk allele carriers are at increased risk of cardiovascular death or stent thrombosis within 30 days after coronary stenting, likely due to higher on-aspirin platelet reactivity. Whether GUCY1A3 genotype helps to tailor antiplatelet treatment remains to be investigated.
Asunto(s)
Enfermedad de la Arteria Coronaria/terapia , Reestenosis Coronaria/genética , Trombosis Coronaria/genética , Intervención Coronaria Percutánea/efectos adversos , Polimorfismo de Nucleótido Simple , Guanilil Ciclasa Soluble/genética , Anciano , Anciano de 80 o más Años , Aspirina/administración & dosificación , Aspirina/efectos adversos , Ensayos Clínicos como Asunto , Clopidogrel/administración & dosificación , Clopidogrel/efectos adversos , Enfermedad de la Arteria Coronaria/enzimología , Enfermedad de la Arteria Coronaria/genética , Enfermedad de la Arteria Coronaria/mortalidad , Reestenosis Coronaria/enzimología , Reestenosis Coronaria/mortalidad , Trombosis Coronaria/enzimología , Trombosis Coronaria/mortalidad , Resistencia a Medicamentos/genética , Europa (Continente) , Femenino , Estudios de Asociación Genética , Predisposición Genética a la Enfermedad , Hemorragia/inducido químicamente , Hemorragia/genética , Homocigoto , Humanos , Masculino , Persona de Mediana Edad , Intervención Coronaria Percutánea/instrumentación , Intervención Coronaria Percutánea/mortalidad , Inhibidores de Agregación Plaquetaria/administración & dosificación , Inhibidores de Agregación Plaquetaria/efectos adversos , Sistema de Registros , Estudios Retrospectivos , Medición de Riesgo , Factores de Riesgo , Stents , Factores de Tiempo , Resultado del TratamientoRESUMEN
Vapor pressures of water were measured for aqueous solutions of N-methyl-morpholine N-oxide (NMMO) at 80, 90 and 100 degrees C. The Flory-Huggins interaction parameters, chi, calculated from these data as a function of phi, the volume fraction of NMMO, are negative at all concentrations; at low phi, they decrease by more than a factor of 2 as T is raised, whereas they remain almost unchanged as phi approaches unity. Accordingly, the heat of mixing is pronouncedly endothermal at low NMMO concentrations but close to athermal at low water content. The composition dependence of chi can be equally well described by the Redlich-Kister equation and by an approach subdividing the mixing process into two separate steps. The opportunities of the latter modeling for a better molecular understanding of the mixing processes are discussed.
RESUMEN
Vapor pressure measurements were performed for aqueous solutions of pullulan ( M w 280 kg/mol) and dextran ( M w 60 and 2100 kg/mol, respectively) at 25, 37.5, and 50 degrees C. The Flory-Huggins interaction parameters obtained from these measurements, plus information on dilute solutions taken from the literature, show that water is a better solvent for pullulan than for dextran. Furthermore, they evince uncommon composition dependencies, including the concurrent appearance of two extrema, a minimum at moderate polymer concentration and a maximum at high polymer concentration. To model these findings, a previously established approach, subdividing the mixing process into two clearly separable steps, was generalized to account for specific interactions between water and polysaccharide segments. Three adjustable parameters suffice to describe the results quantitatively; according to their numerical values, the reasons for the solubility of polysaccharides in water, as compared with that of synthetic polymers in organic solvents, differ in a principal manner. In the former case, the main driving force comes from the first step (contact formation between the components), whereas it is the second step (conformational relaxation) that is advantageous in the latter case.
Asunto(s)
Dextranos/química , Glucanos/química , Cromatografía de Gases , Modelos Químicos , Peso Molecular , Presión , Solventes/química , Termodinámica , Agua/químicaRESUMEN
A paradigm shift seems to emerge, not only in industrial engineering ("Industry 4.0") but also in medicine: we are on the threshold to "Medicine 4.0". For many years, molecular biology had a leading position in life sciences, but today scientists start realizing that microelectronic systems, due to an increasing miniaturization, are reaching the scale of human cells and consequently can be used for therapeutic approaches. This article shows how microelectronics can play a major role in modern medicine, through the example of customized chemotherapy. This consists in determining, before the beginning of the treatment, what kind of chemotherapy or drug combination will be most effective for a given patient, and at which dose. This of course allows the lessening of a patient burden during treatment, but also to be more efficient and, in the long run, to save money. In order to do this, we have developed the Intelligent Microplate Reader (IMR), which allows us to accurately test different drugs on living cells by mimicking part of their usual environment.