Deciphering Optimal Radar Ensemble for Advancing Sleep Posture Prediction through Multiview Convolutional Neural Network (MVCNN) Approach Using Spatial Radio Echo Map (SREM).

Assessing sleep posture, a critical component in sleep tests, is crucial for understanding an individual's sleep quality and identifying potential sleep disorders. However, monitoring sleep posture has traditionally posed significant challenges due to factors such as low light conditions and obstructions like blankets. The use of radar technolsogy could be a potential solution. The objective of this study is to identify the optimal quantity and placement of radar sensors to achieve accurate sleep posture estimation. We invited 70 participants to assume nine different sleep postures under blankets of varying thicknesses. This was conducted in a setting equipped with a baseline of eight radars-three positioned at the headboard and five along the side. We proposed a novel technique for generating radar maps, Spatial Radio Echo Map (SREM), designed specifically for data fusion across multiple radars. Sleep posture estimation was conducted using a Multiview Convolutional Neural Network (MVCNN), which serves as the overarching framework for the comparative evaluation of various deep feature extractors, including ResNet-50, EfficientNet-50, DenseNet-121, PHResNet-50, Attention-50, and Swin Transformer. Among these, DenseNet-121 achieved the highest accuracy, scoring 0.534 and 0.804 for nine-class coarse- and four-class fine-grained classification, respectively. This led to further analysis on the optimal ensemble of radars. For the radars positioned at the head, a single left-located radar proved both essential and sufficient, achieving an accuracy of 0.809. When only one central head radar was used, omitting the central side radar and retaining only the three upper-body radars resulted in accuracies of 0.779 and 0.753, respectively. This study established the foundation for determining the optimal sensor configuration in this application, while also exploring the trade-offs between accuracy and the use of fewer sensors.

Vision Transformers (ViT) for Blanket-Penetrating Sleep Posture Recognition Using a Triple Ultra-Wideband (UWB) Radar System.

Sleep posture has a crucial impact on the incidence and severity of obstructive sleep apnea (OSA). Therefore, the surveillance and recognition of sleep postures could facilitate the assessment of OSA. The existing contact-based systems might interfere with sleeping, while camera-based systems introduce privacy concerns. Radar-based systems might overcome these challenges, especially when individuals are covered with blankets. The aim of this research is to develop a nonobstructive multiple ultra-wideband radar sleep posture recognition system based on machine learning models. We evaluated three single-radar configurations (top, side, and head), three dual-radar configurations (top + side, top + head, and side + head), and one tri-radar configuration (top + side + head), in addition to machine learning models, including CNN-based networks (ResNet50, DenseNet121, and EfficientNetV2) and vision transformer-based networks (traditional vision transformer and Swin Transformer V2). Thirty participants (n = 30) were invited to perform four recumbent postures (supine, left side-lying, right side-lying, and prone). Data from eighteen participants were randomly chosen for model training, another six participants' data (n = 6) for model validation, and the remaining six participants' data (n = 6) for model testing. The Swin Transformer with side and head radar configuration achieved the highest prediction accuracy (0.808). Future research may consider the application of the synthetic aperture radar technique.

Training and retention effects of paced and music-synchronised walking exercises on pre-older females: an interventional study.

BACKGROUND: Physical activity at pre-older ages (55-64 years) can greatly affect one's physical fitness, health, physical-activity behaviour, and quality of life at older ages. The objective of this study was to conduct a 24-week walking-exercise programme among sedentary pre-older females and investigate the influence of different walking cadences on cardiorespiratory fitness and associated biomarkers. METHODS: A total of 78 pre-older sedentary female participants were recruited and randomly assigned to normal (n = 36), paced (n = 15), music-synchronised (n = 15) walking, and no-exercise control (n = 12) groups, respectively. The normal, paced, and music-synchronised walking groups walked at a cadence of 120 steps/min, 125 steps/min, and 120-128 steps/min, respectively, under supervised conditions. Anthropometric characteristics, step length, nutrient intake, blood pressure and composition, and cardiorespiratory fitness were measured at baseline, the 12th week of the programme, the 24th week of the programme (completion), and after a 12-week retention period, which began immediately upon completion of the programme and did not feature any supervised exercises. RESULTS: All walking conditions improved high-density lipoprotein cholesterol (HDL-C), low-density lipoprotein cholesterol, step length, maximum oxygen consumption (VO2max), and oxidative capacity at anaerobic threshold (all P < 0.001); however, after the 12-week retention period only the training effects of HDL-C (P < 0.05) and VO2max (P < 0.05) remained robust. Additionally, music-synchronised walking was found to reduce the fat ratio (P = 0.031), while paced walking was found to reduce body mass (P = 0.049). CONCLUSIONS: The significant pre-post changes in health-related outcomes across the 24-week walking intervention, including improved blood composition, longer step length, and better cardiorespiratory capacity, show that this intervention is promising for improving health and fitness. When, during the retention period, the participants resumed their usual lifestyles without supervised exercise, most physiological biomarkers deteriorated. Thus, for sedentary middle-aged females, persistent behavioural change is necessary to retain the health benefits of physical exercise.

Spectral Analysis of Muscle Hemodynamic Responses in Post-Exercise Recovery Based on Near-Infrared Spectroscopy.

Spectral analysis of blood flow or blood volume oscillations can help to understand the regulatory mechanisms of microcirculation. This study aimed to explore the relationship between muscle hemodynamic response in the recovery period and exercise quantity. Fifteen healthy subjects were required to perform two sessions of submaximal plantarflexion exercise. The blood volume fluctuations in the gastrocnemius lateralis were recorded in three rest phases (before and after two exercise sessions) using near-infrared spectroscopy. Wavelet transform was used to analyze the total wavelet energy of the concerned frequency range (0.005-2 Hz), which were further divided into six frequency intervals corresponding to six vascular regulators. Wavelet amplitude and energy of each frequency interval were analyzed. Results showed that the total energy raised after each exercise session with a significant difference between rest phases 1 and 3. The wavelet amplitudes showed significant increases in frequency intervals I, III, IV, and V from phase 1 to 3 and in intervals III and IV from phase 2 to 3. The wavelet energy showed similar changes with the wavelet amplitude. The results demonstrate that local microvascular regulators contribute greatly to the blood volume oscillations, the activity levels of which are related to the exercise quantity.

A Blanket Accommodative Sleep Posture Classification System Using an Infrared Depth Camera: A Deep Learning Approach with Synthetic Augmentation of Blanket Conditions.

Surveillance of sleeping posture is essential for bed-ridden patients or individuals at-risk of falling out of bed. Existing sleep posture monitoring and classification systems may not be able to accommodate the covering of a blanket, which represents a barrier to conducting pragmatic studies. The objective of this study was to develop an unobtrusive sleep posture classification that could accommodate the use of a blanket. The system uses an infrared depth camera for data acquisition and a convolutional neural network to classify sleeping postures. We recruited 66 participants (40 men and 26 women) to perform seven major sleeping postures (supine, prone (head left and right), log (left and right) and fetal (left and right)) under four blanket conditions (thick, medium, thin, and no blanket). Data augmentation was conducted by affine transformation and data fusion, generating additional blanket conditions with the original dataset. Coarse-grained (four-posture) and fine-grained (seven-posture) classifiers were trained using two fully connected network layers. For the coarse classification, the log and fetal postures were merged into a side-lying class and the prone class (head left and right) was pooled. The results show a drop of overall F1-score by 8.2% when switching to the fine-grained classifier. In addition, compared to no blanket, a thick blanket reduced the overall F1-scores by 3.5% and 8.9% for the coarse- and fine-grained classifiers, respectively; meanwhile, the lowest performance was seen in classifying the log (right) posture under a thick blanket, with an F1-score of 72.0%. In conclusion, we developed a system that can classify seven types of common sleeping postures under blankets and achieved an F1-score of 88.9%.

Plantar Pressure Variability and Asymmetry in Elderly Performing 60-Minute Treadmill Brisk-Walking: Paving the Way towards Fatigue-Induced Instability Assessment Using Wearable In-Shoe Pressure Sensors.

Evaluation of potential fatigue for the elderly could minimize their risk of injury and thus encourage them to do more physical exercises. Fatigue-related gait instability was often assessed by the changes of joint kinematics, whilst planar pressure variability and asymmetry parameters may complement and provide better estimation. We hypothesized that fatigue condition (induced by the treadmill brisk-walking task) would lead to instability and could be reflected by the variability and asymmetry of plantar pressure. Fifteen elderly adults participated in the 60-min brisk walking trial on a treadmill without a pause, which could ensure that the fatigue-inducing effect is continuous and participants will not recover halfway. The plantar pressure data were extracted at baseline, the 30th minute, and the 60th minute. The median of contact time, peak pressure, and pressure-time integrals in each plantar region was calculated, in addition to their asymmetry and variability. After 60 min of brisk walking, there were significant increases in peak pressure at the medial and lateral arch regions, and central metatarsal regions, in addition to their impulses (p < 0.05). In addition, the variability of plantar pressure at the medial arch was significantly increased (p < 0.05), but their asymmetry was decreased. On the other hand, the contact time was significantly increased at all plantar regions (p < 0.05). The weakened muscle control and shock absorption upon fatigue could be the reason for the increased peak pressure, impulse, and variability, while the improved symmetry and prolonged plantar contact time could be a compensatory mechanism to restore stability. The outcome of this study can facilitate the development of gait instability or fatigue assessment using wearable in-shoe pressure sensors.

Identifying Fatigue Indicators Using Gait Variability Measures: A Longitudinal Study on Elderly Brisk Walking.

Real-time detection of fatigue in the elderly during physical exercises can help identify the stability and thus falling risks which are commonly achieved by the investigation of kinematic parameters. In this study, we aimed to identify the change in gait variability parameters from inertial measurement units (IMU) during a course of 60 min brisk walking which could lay the foundation for the development of fatigue-detecting wearable sensors. Eighteen elderly people were invited to participate in the brisk walking trials for 60 min with a single IMU attached to the posterior heel region of the dominant side. Nine sets of signals, including the accelerations, angular velocities, and rotation angles of the heel in three anatomical axes, were measured and extracted at the three walking times (baseline, 30th min, and 60th min) of the trial for analysis. Sixteen of eighteen participants reported fatigue after walking, and there were significant differences in the median acceleration (p = 0.001), variability of angular velocity (p = 0.025), and range of angle rotation (p = 0.0011), in the medial-lateral direction. In addition, there were also significant differences in the heel pronation angle (p = 0.005) and variability and energy consumption of the angles in the anterior-posterior axis (p = 0.028, p = 0.028), medial-lateral axis (p = 0.014, p = 0.014), and vertical axis (p = 0.002, p < 0.001). Our study demonstrated that a single IMU on the posterior heel of the dominant side can address the variability of kinematics parameters for elderly performing prolonged brisk walking and could serve as an indicator for walking instability, and thus fatigue.

Biomechanical consideration of prosthesis selection in hybrid surgery for bi-level cervical disc degenerative diseases.

PURPOSE: Hybrid surgery (HS) coupling total disc replacement and fusion has been increasingly applied for multilevel cervical disc diseases (CDD). However, selection of the optimal disc prosthesis for HS in an individual patient has not been investigated. This study aimed to distinguish the biomechanical performances of five widely used prostheses (Bryan, ProDisc-C, PCM, Mobi-C, and Discover) in HS for the treatment of bi-level CDD. METHODS: A finite element model of healthy cervical spine (C3-C7) was developed, and five HS models using different disc prostheses were constructed by arthrodesis at C4-C5 and by arthroplasty at C5-C6. First, the rotational displacements in flexion (Fl), extension, axial rotation, and lateral bending in the healthy model under 1.0 Nm moments combined with 73.6 N follower load were achieved, and then the maximum rotations in each direction combined with the same follower load were applied in the surgical models following displacement control testing protocols. RESULTS: The range of motion (ROM) of the entire operative and adjacent levels was close to that of the healthy spine for ball-in-socket prostheses, that is, ProDisc-C, Mobi-C, and Discover, in Fl. For Bryan and PCM, the ROM of the operative levels was less than that of the healthy spine in Fl and resulted in the increase in ROMs at the adjacent levels. Ball-in-socket prostheses produced similar reaction moments (92-99 %) in Fl, which were close to that of the healthy spine. Meanwhile, Bryan and PCM required greater moments (>130 %). The adjacent intradiscal pressures (IDPs) in the models of ball-in-socket prostheses were close to that of the healthy spine. Meanwhile, in the models of Bryan and PCM, the adjacent IDPs were 25 % higher than that of the ball-in-socket models. The maximum facet stress in the model of Mobi-C was the greatest among all prostheses, which was approximately two times that of the healthy spine. Moreover, Bryan produced the largest stress on the bone-implant interface, followed by PCM, Mobi-C, ProDisc-C, and Discover. CONCLUSION: Each disc prosthesis has its biomechanical advantages and disadvantages in HS and should be selected on an individual patient basis. In general, ProDisc-C, Mobi-C, and Discover produced similar performances in terms of spinal motions, adjacent IDPs, and driving moments, whereas Bryan and PCM produced similar biomechanical performances. Therefore, HS with Discover, Bryan, and PCM may be suitable for patients with potential risk of facet joint degeneration, whereas HS with ProDisc-C, Mobi-C, and Discover may be suitable for patients with potential risk of vertebral osteoporosis.

Finite element analysis of the valgus knee joint of an obese child.

BACKGROUND: Knee valgus and varus morbidity is at the second top place in children lower limb deformity diseases. It may cause abnormal stress distribution. The magnitude and location of contact forces on tibia plateau during gait cycle have been indicated as markers for risk of osteoarthritis. So far, few studies reported the contact stress and force distribution on tibial plateau of valgus knee of children. METHODS: To estimate the contact stresses and forces on tibial plateau of an 8-year old obese boy with valgus knee and a 7-year old healthy boy, three-dimensional (3D) finite element (FE) models of their left knee joints were developed. The valgus knee model has 36,897 nodes and 1,65,106 elements, and the normal knee model has 78,278 nodes and 1,18,756 elements. Paired t test was used for the comparison between the results from the 3D FE analysis method and the results from traditional kinematic measurement methods. RESULTS: The p value of paired t test is 0.12. Maximum stresses shifted to lateral plateau in knee valgus children while maximum stresses were on medial plateau in normal knee child at the first peak of vertical GRF of stance phase. The locations of contact centers on medial plateau changed 3.38 mm more than that on lateral plateau, while the locations of contact centers on medial plateau changed 1.22 mm less than that on lateral plateau for healthy child from the first peak to second peak of vertical GRF of stance phase. CONCLUSIONS: The paired t test result shows that there is no significant difference between the two methods. The results of FE analysis method suggest that knee valgus malalignment could be the reason for abnormal knee load that may cause knee problems in obese children with valgus knee in the long-term. This study may help to understand biomechanical mechanism of valgus knees of obese children.

Balance Improvement Effects of Biofeedback Systems with State-of-the-Art Wearable Sensors: A Systematic Review.

Falls and fall-induced injuries are major global public health problems. Balance and gait disorders have been the second leading cause of falls. Inertial motion sensors and force sensors have been widely used to monitor both static and dynamic balance performance. Based on the detected performance, instant visual, auditory, electrotactile and vibrotactile biofeedback could be provided to augment the somatosensory input and enhance balance control. This review aims to synthesize the research examining the effect of biofeedback systems, with wearable inertial motion sensors and force sensors, on balance performance. Randomized and non-randomized clinical trials were included in this review. All studies were evaluated based on the methodological quality. Sample characteristics, device design and study characteristics were summarized. Most previous studies suggested that biofeedback devices were effective in enhancing static and dynamic balance in healthy young and older adults, and patients with balance and gait disorders. Attention should be paid to the choice of appropriate types of sensors and biofeedback for different intended purposes. Maximizing the computing capacity of the micro-processer, while minimizing the size of the electronic components, appears to be the future direction of optimizing the devices. Wearable balance-improving devices have their potential of serving as balance aids in daily life, which can be used indoors and outdoors.

A Vibrotactile and Plantar Force Measurement-Based Biofeedback System: Paving the Way towards Wearable Balance-Improving Devices.

Although biofeedback systems have been used to improve balance with success, they were confined to hospital training applications. Little attempt has been made to investigate the use of in-shoe plantar force measurement and wireless technology to turn hospital training biofeedback systems into wearable devices. This research developed a wearable biofeedback system which detects body sway by analyzing the plantar force and provides users with the corresponding haptic cues. The effects of this system were evaluated in thirty young and elderly subjects with simulated reduced foot sensation. Subjects performed a Romberg test under three conditions: (1) no socks, system turned-off; (2) wearing five layers of socks, system turned-off; (3) wearing five layers of socks, and system turned-on. Degree of body sway was investigated by computing the center of pressure (COP) movement measured by a floor-mounted force platform. Plantar tactile sensation was evaluated using a monofilament test. Wearing multiple socks significantly decreased the plantar tactile sensory input (p < 0.05), and increased the COP parameters (p < 0.017), indicating increased postural sway. After turning on the biofeedback system, the COP parameters decreased significantly (p < 0.017). The positive results of this study should inspire future development of wearable plantar force-based biofeedback systems for improving balance in people with sensory deficits.

Biomechanical role of bone grafting for calcaneal fracture fixation in the presence of bone defect: A finite element analysis.

BACKGROUND: The purpose of this study was to compare the biomechanical stress and stability of calcaneal fixations with and without bone defect, before and after bone grafting, through a computational approach. METHODS: A finite element model of foot-ankle complex was reconstructed, impoverished with a Sanders III calcaneal fracture without bone defect and with moderate and severe bone defects. Plate fixations with and without bone grafting were introduced with walking stance simulated. The stress and fragment displacement of the calcaneus were evaluated. FINDINGS: Moderate and severe defect increased the calcaneus stress by 16.11% and 32.51%, respectively and subsequently decreased by 10.76% and 20.78% after bone grafting. The total displacement was increased by 3.99% and 24.26%, respectively by moderate and severe defect, while that of posterior joint facet displacement was 86.66% and 104.44%. The former was decreased by 25.73% and 35.96% after grafting, while that of the latter was reduced by 88.09% and 84.78% for moderate and severe defect, respectively. INTERPRETATION: Our finite element prediction supported that bone grafting for fixation could enhance the stability and reduce the risk of secondary stress fracture in cases of bone defect in calcaneal fracture.

SaccpaNet: A Separable Atrous Convolution-based Cascade Pyramid Attention Network to Estimate Body Landmarks Using Cross-modal Knowledge Transfer for Under-blanket Sleep Posture Classification.

The accuracy of sleep posture assessment in standard polysomnography might be compromised by the unfamiliar sleep lab environment. In this work, we aim to develop a depth camera-based sleep posture monitoring and classification system for home or community usage and tailor a deep learning model that can account for blanket interference. Our model included a joint coordinate estimation network (JCE) and sleep posture classification network (SPC). SaccpaNet (Separable Atrous Convolution-based Cascade Pyramid Attention Network) was developed using a combination of pyramidal structure of residual separable atrous convolution unit to reduce computational cost and enlarge receptive field. The Saccpa attention unit served as the core of JCE and SPC, while different backbones for SPC were also evaluated. The model was cross-modally pretrained by RGB images from the COCO whole body dataset and then trained/tested using dept image data collected from 150 participants performing seven sleep postures across four blanket conditions. Besides, we applied a data augmentation technique that used intra-class mix-up to synthesize blanket conditions; and an overlaid flip-cut to synthesize partially covered blanket conditions for a robustness that we referred to as the Post-hoc Data Augmentation Robustness Test (PhD-ART). Our model achieved an average precision of estimated joint coordinate (in terms of PCK@0.1) of 0.652 and demonstrated adequate robustness. The overall classification accuracy of sleep postures (F1-score) was 0.885 and 0.940, for 7- and 6-class classification, respectively. Our system was resistant to the interference of blanket, with a spread difference of 2.5%.

Virtual reality-based simulation intervention for enhancing the empathy of informal caregivers of people with dementia: A mixed-methods systematic review.

Dementia is a long-term and progressive syndrome that not only influences the person with dementia (PWD) but also the caregiver. However, informal caregivers are not always empathic and understand the symptoms of dementia, leading to destructive caregiving relationships and poor quality of caregiving. VR-based simulation interventions can provide a more realistic and memorable learning experience for caregivers to walk in PWDs' shoes. This review aimed to provide practitioners and researchers with insights on developing and/or adopting an effective VR-based simulation intervention for enhancing the empathy of informal caregivers of PWD. A mixed-methods systematic review was conducted. Quantitative, qualitative, and mixed-methods studies were searched from MEDLINE, PsycINFO, CINAHL, Scopus, Embase, and Cochrane Library updating. Standard JBI critical appraisal instruments were used for the quality appraisal. A convergent segregated approach was used to synthesize and integrate the data. A total of seven studies were included. Inconsistent quantitative results were reported on the effects of VR-based simulation on empathy enhancement. Significant effects were reported on knowledge of dementia and emotion-focused coping strategies. Two themes were generated from the qualitative studies, including "Informal caregivers gained better insight into problems encountered by older people with dementia" and "Thinking from the perspective of older people with dementia, leading to changes in attitudes and behaviours towards dementia". The qualitative synthesized evidence showed that informal caregivers gained better insight into problems encountered by PWD, but the quantitative synthesized results are inconsistent. Yet, informal caregivers experienced a change in attitude by thinking from the perspective of PWD.

Forefoot Function after Hallux Valgus Surgery: A Systematic Review and Meta-Analysis on Plantar Load Measurement.

While hallux valgus (HV) surgeries are useful for correcting skeletal alignment problems, their effects on plantar load, which reflects forefoot functions, are less understood. The objective of this study is to conduct a systematic review and meta-analysis on the plantar load change after HV surgeries. A systematic search of Web of Science, Scopus, PubMed, CENTRAL, EMBASE, and CINAHL was performed. Studies that assessed the pre- and post-operative plantar pressure of HV patients undergoing surgeries and reported load-related parameters over the hallux, medial metatarsal, and/or central metatarsal regions were included. Studies were appraised by using the modified NIH quality assessment tool for before-after study. Studies suitable for meta-analysis were pooled with the random-effects model, using the standardized mean difference of the before-after parameters as an effect measure. Twenty-six studies containing 857 HV patients and 973 feet were included for the systematic review. Meta-analysis was conducted on 20 of them, and most studies did not favor HV surgeries. Overall, HV surgeries reduced the plantar load over the hallux region (SMD -0.71, 95% CI, -1.15 to -0.26), indicating that forefoot function worsened after surgeries. For the other five outcomes, the overall estimates were not statistically significant, indicating that surgeries did not improve them either. There was substantial heterogeneity among the studies, which in most cases could not be resolved by pre-planned subgroup analyses by surgical classification, year of publication, median age of patients, and length of follow-up. Sensitivity analysis removing lower-quality studies showed that the load integrals (impulse) over the central metatarsal region significantly increased (SMD 0.27, 95% CI, 0 to 0.53), indicating that surgeries increased the risk of transfer metatarsalgia. There is no solid evidence that HV surgeries could improve forefoot functions from a biomechanical point perspective. Currently available evidence even suggests that surgeries might reduce the plantar load over the hallux and adversely affect push-off function. The reasons behind and the effectiveness of alternative surgical methods warrant further investigation.

Training effects of set- and repetition-interval rest time on recumbent-boxing exercise: Could virtual reality improve further?

This study examined the influence of set-interval and repetition-interval rest time of virtual reality (VR) boxing game in supine-lying posture. Fifty healthy middle-aged adults were randomly assigned into VR and non-VR groups to perform six different exercise protocols with varying set-interval and repetition-interval rest times (S0R0, S0R1/3, S0R2/3, S40R0, S40R1/3, and S40R2/3). Analysis on the non-VR group showed significant differences between exercise protocols for average heart rate (p < 0.001), maximum ventilation volume (p < 0.001), respiratory quotient (p < 0.001), oxygen pulse (p < 0.001), and excess post-exercise oxygen consumption (EPOC) (p = 0.003). VR appeared to have no further improvement on physical training effects in middle-aged adults, while the participants reported negative experience that might be associated with the over-exertion. Future study might need to explore game design elements that can accommodate high-exertion exercises.

Modified lumbo-pelvic exercise to alleviate mild stress urinary incontinence in middle-aged females.

Urinary incontinence is one of the common clinical problems of females passing middle age. Traditional pelvic floor muscle training to alleviate urinary incontinence is too dull and unpleasant. Therefore, we were motivated to purpose a modified lumbo-pelvic exercise training incorporating simplified dancing components with pelvic floor muscle training. The objective of this study was to evaluate the 16-week modified lumbo-pelvic exercise program that incorporated dance and abdominal drawing-in maneuvers. Middle-aged females were randomly assigned into the experimental (n = 13) and control (n = 11) groups. Compared to the control group, the exercise group significantly reduced body fat, visceral fat index, waistline, waist-hip ratio, perceived incontinence score, frequency of urine leakage, and pad testing index (p < 0.05). In addition, there were significant improvements in pelvic floor function, vital capacity, and muscle activity of the right rectus abdominis (p < 0.05). This indicated that the modified lumbo-pelvic exercise program can promote benefits of physical training and alleviate urinary incontinence in middle-aged females.

Computational Biomechanics of Sleep: A Systematic Mapping Review.

Biomechanical studies play an important role in understanding the pathophysiology of sleep disorders and providing insights to maintain sleep health. Computational methods facilitate a versatile platform to analyze various biomechanical factors in silico, which would otherwise be difficult through in vivo experiments. The objective of this review is to examine and map the applications of computational biomechanics to sleep-related research topics, including sleep medicine and sleep ergonomics. A systematic search was conducted on PubMed, Scopus, and Web of Science. Research gaps were identified through data synthesis on variants, outcomes, and highlighted features, as well as evidence maps on basic modeling considerations and modeling components of the eligible studies. Twenty-seven studies (n = 27) were categorized into sleep ergonomics (n = 2 on pillow; n = 3 on mattress), sleep-related breathing disorders (n = 19 on obstructive sleep apnea), and sleep-related movement disorders (n = 3 on sleep bruxism). The effects of pillow height and mattress stiffness on spinal curvature were explored. Stress on the temporomandibular joint, and therefore its disorder, was the primary focus of investigations on sleep bruxism. Using finite element morphometry and fluid-structure interaction, studies on obstructive sleep apnea investigated the effects of anatomical variations, muscle activation of the tongue and soft palate, and gravitational direction on the collapse and blockade of the upper airway, in addition to the airflow pressure distribution. Model validation has been one of the greatest hurdles, while single-subject design and surrogate techniques have led to concerns about external validity. Future research might endeavor to reconstruct patient-specific models with patient-specific loading profiles in a larger cohort. Studies on sleep ergonomics research may pave the way for determining ideal spine curvature, in addition to simulating side-lying sleep postures. Sleep bruxism studies may analyze the accumulated dental damage and wear. Research on OSA treatments using computational approaches warrants further investigation.

Sonoelastography for Testicular Tumor Identification: A Systematic Review and Meta-Analysis of Diagnostic Test Accuracy.

The objective of this review was to summarize the applications of sonoelastography in testicular tumor identification and inquire about their test performances. Two authors independently searched English journal articles and full conference papers from CINAHL, Embase, IEEE Xplore®, PubMed, Scopus, and Web of Science from inception and organized them into a PIRO (patient, index test, reference test, outcome) framework. Eleven studies (n = 11) were eligible for data synthesis, nine of which (n = 9) utilized strain elastography and two (n = 2) employed shear-wave elastography. Meta-analyses were performed on the distinction between neoplasm (tumor) and non-neoplasm (non-tumor) from four study arms and between malignancy and benignity from seven study arms. The pooled sensitivity of classifying malignancy and benignity was 86.0% (95%CI, 79.7% to 90.6%). There was substantial heterogeneity in the classification of neoplasm and non-neoplasm and in the specificity of classifying malignancy and benignity, which could not be addressed by the subgroup analysis of sonoelastography techniques. Heterogeneity might be associated with the high risk of bias and applicability concern, including a wide spectrum of testicular pathologies and verification bias in the reference tests. Key technical obstacles in the index test were manual compression in strain elastography, qualitative observation of non-standardized color codes, and locating the Regions of Interest (ROI), in addition to decisions in feature extractions. Future research may focus on multiparametric sonoelastography using deep learning models and ensemble learning. A decision model on the benefits-risks of surgical exploration (reference test) could also be developed to direct the test-and-treat strategy for testicular tumors.

A Comprehensive Assessment Protocol for Swallowing (CAPS): Paving the Way towards Computer-Aided Dysphagia Screening.

Dysphagia is one of the most common problems among older adults, which might lead to aspiration pneumonia and eventual death. It calls for a feasible, reliable, and standardized screening or assessment method to prompt rehabilitation measures and mitigate the risks of dysphagia complications. Computer-aided screening using wearable technology could be the solution to the problem but is not clinically applicable because of the heterogeneity of assessment protocols. The aim of this paper is to formulate and unify a swallowing assessment protocol, named the Comprehensive Assessment Protocol for Swallowing (CAPS), by integrating existing protocols and standards. The protocol consists of two phases: the pre-test phase and the assessment phase. The pre-testing phase involves applying different texture or thickness levels of food/liquid and determining the required bolus volume for the subsequent assessment. The assessment phase involves dry (saliva) swallowing, wet swallowing of different food/liquid consistencies, and non-swallowing (e.g., yawning, coughing, speaking, etc.). The protocol is designed to train the swallowing/non-swallowing event classification that facilitates future long-term continuous monitoring and paves the way towards continuous dysphagia screening.