RESUMEN
High-entropy oxides (HEOs), featuring infinite chemical composition and exceptional physicochemical properties, are attracting much attention. The configurational entropy caused by a component disorder of HEOs is popularly believed to be the main driving force for thermal stability, while the role of vibrational entropy in the thermodynamic landscape has been neglected. In this study, we systematically investigated the vibrational entropy of multicomponent rutile oxides (including Fe0.5Ta0.5O2, Fe0.333Ti0.333Ta0.333O2, Fe0.25Ti0.25Ta0.25Sn0.25O2, and Fe0.21Ti0.21Ta0.21Sn0.21Ge0.16O2) by precise heat capacity measurements. It is found that vibrational entropy gradually decreases with increasing component disorder, beyond what one could expect from an equilibrium thermodynamics perspective. Moreover, all multicomponent rutile oxides exhibit a positive excess vibrational entropy at 298.15 K. Upon examinations of configuration disorder, size mismatch, phase transition, and polyhedral distortions, we demonstrate that the excess vibrational entropy plays a pivotal role in lowering the crystallization temperature of multicomponent rutile oxides. These findings represent the first experimental confirmation of the role of lattice vibrations in the thermodynamic landscape of rutile HEOs. In particular, vibrational entropy could serve as a novel descriptor to guide the predictive design of multicomponent oxide materials.
RESUMEN
This work highlights the synthesis and properties of novel basic hydroxohalide glasses of zirconium and hafnium. The hydroxohalide glasses are M(OH)4-αXα·(n)H2O where M represents either zirconium or hafnium, and X represents either chloride or bromide. The chemical structure is investigated using X-ray diffraction, total scattering, and the pair distribution function method to identify the local structure and any short-range connectivity. The thermodynamic properties of the glasses are probed using low-temperature heat capacity, where a gap in the phonon density of states is discussed and related to boson peaks in the heat capacity of the glasses. These results represent the first published synthesis and thermodynamic properties of zirconium and hafnium basic hydroxohalide glasses. Synthesis methods, structural determination, and analysis of the heat capacity data allow for a comprehensive look at the makeup and unique properties of these novel glassy materials. Values of the standard thermodynamic functions Cp,m°, Δ0TSm°, Δ0THm°, and Φm° are also reported.
RESUMEN
Metal-organic frameworks are a class of porous compounds with potential applications in molecular sieving, gas sequestration, and catalysis. One family of MOFs, zeolitic imidizolate frameworks (ZIFs), is of particular interest for carbon dioxide sequestration. We have previously reported the heat capacity of the sodalite topology of the zinc 2-methylimidazolate framework (ZIF-8), and in this Article we present the first low-temperature heat capacity measurements of ZIF-8 with various amounts of sorbed CO2. Molar heat capacities from 1.8 to 300 K are presented for samples containing up to 0.99 mol of CO2 per mol of ZIF-8. Samples with at least 0.56 mol of CO2 per mol of ZIF-8 display a large, broad anomaly from 70 to 220 K with a shoulder on the low-temperature side, suggesting sorption-induced structural transitions. We attribute the broad anomaly partially to a gate-opening transition, with the remainder resulting from CO2 rearrangement and/or lattice expansion. The measurements also reveal a subtle anomaly from 0 to 70 K in all samples that does not exist in the sorbate-free material, which likely reflects new vibrational modes resulting from sorbate/ZIF-8 interactions. These results provide the first thermodynamic evidence of structural transitions induced by CO2 sorption in the ZIF-8 framework.
RESUMEN
High temperature oxide melt solution calorimetry has been performed to investigate the enthalpies of mixing (ΔmixH) of bulk and nanophase (1 -x)Fe3O4-xM3O4 (M = Co, Mn) spinel solid solutions. The entropies of mixing (ΔmixS) were calculated from the configurational entropies based on cation distributions, and the Gibbs free energies of mixing (ΔmixG) were obtained. The ΔmixH and ΔmixG for the (1 -x)Fe3O4-xCo3O4 system are negative over the complete solid solution range, for both macroscopic and nanoparticulate materials. In (1 -x)Fe3O4-xMn3O4, the formation enthalpies of cubic Fe3O4 (magnetite) and tetragonal Mn3O4 (hausmannite) are negative for Mn3O4 mole fractions less than 0.67 and slightly positive for higher manganese content. Relative to cubic Fe3O4 and cubic Mn3O4 (stable at high temperature), the enthalpies and Gibbs energies of mixing are negative over the entire composition range. A combination of measured mixing enthalpies and reported Gibbs energies in the literature provides experimental entropies of mixing. The experimental entropies of mixing are consistent with those calculated from cation distributions for x > 0.3 but are smaller than those predicted for x < 0.3. This discrepancy may be related to the calculations, having treated Fe(2+) and Fe(3+) as distinguishable species. The measured surface energies of the (1 -x)Fe3O4-xM3O4 solid solutions are in the range of 0.6-0.9 J m(-2), similar to those of many other spinels. Because the surface energies are relatively constant, the thermodynamics of mixing at a given particle size throughout the solid solution can be considered independent of the particular particle size, thus confirming and extending the conclusions of a recent study on iron spinels.
RESUMEN
Normal spinel zinc ferrite (ZnFe2O4) nanoparticles (NPs) with zero net magnetization were synthesized by a facile coprecipitation method in which two kinds of organic alkali, namely, 1-amino-2-propanol (MIPA) and bis(2-hydroxypropyl)-amine (DIPA), were used. The diameters of the ZnFe2O4 NPs were determined to be about 7 and 9 nm for samples prepared with MIPA and DIPA, respectively, and the normal spinel structure was confirmed by the magnetic property measurement at room temperature and the temperature dependence of the direct current magnetization. These results are different from those reported in the literature, where ZnFe2O4 NPs show a nonzero net magnetization. The heat capacity of the ZnFe2O4 NPs synthesized using DIPA was measured using a physical property measurement system in the temperature range from 2 to 300 K, and the thermodynamic functions were calculated based on the curve fitting of the experimental heat capacity data. The heat capacity of the ZnFe2O4 NPs was compared with that of a nanosized (Zn(0.795)Fe(0.205))[Zn(0.205)Fe(1.795)]O4 material studied in the literature, indicating that the Debye temperature of the present sample is more comparable with that of the bulk ZnFe2O4 reported by Westrum et al.
RESUMEN
ATTR amyloidosis is caused by deposition of large, insoluble aggregates (amyloid fibrils) of cross-ß-sheet TTR protein molecules on the intercellular surfaces of tissues. The process of amyloid formation from monomeric TTR protein molecules to amyloid deposits has not been fully characterized and is therefore modeled in this paper. Two models are considered: 1) TTR monomers in the blood spontaneously fold into a ß-sheet conformation, aggregate into short proto-fibrils that then circulate in the blood until they find a complementary tissue where the proto-fibrils accumulate to form the large, insoluble amyloid fibrils found in affected tissues. 2) TTR monomers in the native or ß-sheet conformation circulate in the blood until they find a tissue binding site and deposit in the tissue or tissues forming amyloid deposits in situ. These models only differ on where the selection for ß-sheet complementarity occurs, in the blood where wt-wt, wt-v, and v-v interactions determine selectivity, or on the tissue surface where tissue-wt and tissure-v interactions also determine selectivity. Statistical modeling in both cases thus involves selectivity in fibril aggregation and tissue binding. Because binding of protein molecules into fibrils and binding of fibrils to tissues occurs through multiple weak non-covalent bonds, strong complementarity between ß-sheet molecules and between fibrils and tissues is required to explain the insolubility and tissue selectivity of ATTR amyloidosis. Observation of differing tissue selectivity and thence disease phenotypes from either pure wildtype TTR protein or a mix of wildtype and variant molecules in amyloid fibrils evidences the requirement for fibril-tissue complementarity. Understanding the process that forms fibrils and binds fibrils to tissues may lead to new possibilities for interrupting the process and preventing or curing ATTR amyloidosis.
Asunto(s)
Amiloide , Prealbúmina , Prealbúmina/metabolismo , Prealbúmina/química , Humanos , Amiloide/metabolismo , Amiloide/química , Neuropatías Amiloides Familiares/metabolismo , Neuropatías Amiloides Familiares/patología , Amiloidosis/metabolismo , Modelos Moleculares , Conformación Proteica en Lámina betaRESUMEN
Our simple and uniquely cost-effective solvent-deficient synthetic method produces 3-5 nm Al2O3 nanoparticles which show promise as improved industrial catalyst-supports. While catalytic applications are sensitive to the details of the atomic structure, a diffraction analysis of alumina nanoparticles is challenging because of extreme size/microstrain-related peak broadening and the similarity of the diffraction patterns of various transitional Al2O3 phases. Here, we employ a combination of X-ray pair-distribution function (PDF) and Rietveld methods, together with solid-state NMR and thermogravimetry/differential thermal analysis-mass spectrometry (TG/DTA-MS), to characterize the alumina phase-progression in our nanoparticles as a function of calcination temperature between 300 and 1200 °C. In the solvent-deficient synthetic environment, a boehmite precursor phase forms which transitions to γ-Al2O3 at an extraordinarily low temperature (below 300 °C), but this γ-Al2O3 is initially riddled with boehmite-like stacking-fault defects that steadily disappear during calcination in the range from 300 to 950 °C. The healing of these defects accounts for many of the most interesting and widely reported properties of the γ-phase.
RESUMEN
In this paper we report a combined calorimetric and inelastic neutron scattering (INS) study of hydrated γ-Al2O3 (γ-alumina) nanoparticles. These complementary techniques have enabled a comprehensive evaluation of the thermodynamic properties of this technological and industrially important metal oxide to be achieved. The isobaric heat capacity (C(p)) data presented herein provide further critical insights into the much-debated chemical composition of γ-alumina nanoparticles. Furthermore, the isochoric heat capacity (C(v)) of the surface water, which is so essential to the stability of all metal-oxides at the nanoscale, has been extracted from the high-resolution INS data and differs significantly from that of ice-Ih due to the dominating influence of strong surface-water interactions. This study also encompassed the analysis of four γ-alumina samples with differing pore diameters [4.5 (1), 13.8 (2), 17.9 (3), and 27.2 nm (4)], and the results obtained allow us to unambiguously conclude that the water content and pore size have no influence on the thermodynamic behaviour of hydrated γ-alumina nanoparticles.
RESUMEN
The characterization of cytisine (CYT) and its blends with poly(lactic acid) was performed using thermal analysis, elemental analysis, infrared spectroscopy, and powder X-ray diffractometry. The heat capacities, total enthalpy, and phase transitions of CYT were established from 1.8 to 448.15 K (-271.35 - 175 °C) by advanced thermal analysis. Data were obtained using a Quantum Design Physical Property Measurement System (PPMS) and a differential scanning calorimetry (DSC). The low-temperature heat capacity of the crystalline CYT in the range of 1.8 to 300 K (-271.35 - 26.86 °C) was measured by PPMS and fitted to a theoretical model in the low temperature region below 11 K (-262.15 °C), to orthogonal polynomials in the middle range 5 K < T < 60 K (-268.15 °C < t < -213.15 °C) and to the Debye and Einstein functions in the high range of temperature above 60 K (-213.15 °C). The liquid heat capacity was calculated based on the approximated linear regression data above the molten state of the experimental heat capacity of CYT obtained by the standard DSC measurements, and it was expressed as Cpliquid = 0.0838T + 346.78 J·K-1·mol-1. The calculated heat capacity in the solid state was extended to a higher temperature and was used, together with liquid heat capacity, as the reference baselines for the advanced thermal analysis of CYT. The PPMS and DSC/TMDSC methods are complementary methods for thermal analysis of cytisine. The PPMS method allowed determination of the equilibrium heat capacity in the solid state, which together with the equilibrium heat capacity in the liquid state allowed to analyze of the experimental apparent heat capacity of cytisine obtained based on DSC. The melting temperature and the total heat of fusion of crystalline material were established as 431.8 K (158.65 °C) and 26.5 kJ·mol-1, respectively. The solid and liquid heat capacities and transition parameters of CYT were applied to calculate total enthalpies for fully amorphous and crystalline states. Analyses of DSC and X-ray confirmed the presence of the solid-solid transition linking with not so far described a polymorphism phenomenon of CYT. Based on the thermogravimetric analysis the temperature of degradation of CYT was determined as 460.5 K (187.35 °C). Also, a preliminary thermal analysis of the blends of cytisine and poly(lactic acid) as a new candidate for drug delivery system was presented.
Asunto(s)
Calor , Cese del Hábito de Fumar , Preparaciones Farmacéuticas , Temperatura , Rastreo Diferencial de CalorimetríaRESUMEN
A low-cost mass spectrometer attachment for thermogravimetric analysis has been constructed from readily available commercial instruments and components. The benefits of this set-up include excellent mass-flow repeatability, simple design, and significantly lower adoption cost as opposed to ready-built commercial solutions. The inclusion of an open source software package allows semi-automated, highly simplified data analysis. The results from the instrument show excellent sensitivity for small volumes of evolved gas, as well as highly reproducible signal strengths. The GUI-based software package provides data analysis in a way that is very intuitive and that can be easily modified to work with a broad range of TG instruments.
RESUMEN
Naturally occurring ferrihydrite is both impure and difficult to isolate, so the numerous applications and interesting properties of ferrihydrite have spurred the development of various synthetic techniques. Nearly all techniques are based on the hydrolysis of an iron salt and require careful control of temperature, pH, and concentration. In this Article, we report a new synthetic method which does not require such control and is perhaps the fastest and simplest route to synthesizing ferrhydrite. XRD, TEM, BET, and chemical purity characterizations show that the chemically pure, 2-line ferrihydrite product consists of crystallites 2-6 nm in diameter which aggregate to form mesoporous, high surface area agglomerates that are attractive candidates for the many adsorption applications of ferrihydrite. X-ray PDF data were also collected for the ferrihydrite product and refined against the hexagonal structural model recently proposed by Michel et al. These analyses suggest that ferrihydrite has a consistent, repeatable structure independent of variation in the synthetic method, water content of the sample, or particle size of the crystallites, and this structure can be adequately described by the proposed hexagonal model.
RESUMEN
The thermal behaviour of crystalline and amorphous carvedilol (CAR) phases was studied by advanced thermal analysis using Quantum Design Physical Property Measurement System and Differential Scanning Calorimetry. Theoretical functions describing crystalline carvedilol heat capacity at low temperatures and the Debye-Einstein function for high temperatures were obtained. Based on the experimental heat capacity values, solid and liquid baselines were established, and the state functions (H, S, G) for solid and liquid states were calculated. A comprehensive characterization of melting and glass transition processes was obtained. CAR is easily amorphizable by cooling the liquid. The residual entropy, which quantifies the extent of frozen-in disorder in the amorphous solid, for glassy CAR was estimated as 51 J·mol-1·K-1. The Kauzmann temperature (TK) was estimated based on enthalpy and entropy. Molecular motions in the amorphous phase were also studied. The activation energy for structural relaxation (Ea = 539 kJ·mol-1) and fragility parameter (m = 91) were obtained from the non-isothermal physical ageing. The isothermal physical ageing kinetics of amorphous CAR was studied by applying Kohlrausch-Williams-Watts (KWW) model. The mean molecular relaxation time constant (τKWW = 117 min) and relaxation constant (ßKWW = 0.33) were obtained. CAR was classified as a fragile glass-former. Furthermore, τKWW constant for samples aged at 303.15 K is very low, thus, the physical ageing will occur during the short- and long-term storage of amorphous CAR, potentially changing its physicochemical properties during the ageing process. However, the results of molecular mobility studies (high molecular motions) show that the relationship between molecular motions in a glassy solid and its tendency to crystallization does not seem to follow an expected pattern, i.e., no crystallization occurred by thermal treatment of glassy, supercooled liquid and liquid phases of CAR as one would expect. Modern calorimetry and quantitative thermal analysis provided the fundamental kinetic and thermodynamic information about the crystalline and amorphous states of CAR.
Asunto(s)
Carvedilol , Rastreo Diferencial de Calorimetría , Cristalización , Transición de Fase , TermodinámicaRESUMEN
Growth of an organism involves transformations of the state of matter from unstructured food or photosynthate into the highly organized matter in the living organism. Biological evolution involves random changes in the structure of DNA that lead to changes in the organization of the matter in an organism. Thermodynamic data show the organized biomass in living organisms has the same thermodynamic properties as a random mixture of the same elemental composition and is not in an energetically metastable, low entropy state. Therefore, the central thesis of this work is that building biological structures and organization from foodstuffs incurs no direct thermodynamic cost. The implication is that growth and evolution occur with little or no thermodynamic cost. In consequence, the fundamental difference between living biomass and lifeless organic sludge is in the information constraints that direct and govern the organization of the system. These constraints within a living organism override random processes to produce an organized distribution of biomass within the organism. Similarly, the information in DNA constrains the outcome of biological evolution across organisms within a population of a species in a predictable way that leads to convergent evolution. Although individuals and molecules act or are acted upon in a random manner, the outcome in a constrained system is predictable within an organism and across organisms. As a consequence evolution will produce similar outcomes at the macro level in similar environments. Stochastic determinism is proposed as a method that could be used to model convergent evolution.
Asunto(s)
Plantas/metabolismo , Termodinámica , Adenosina Trifosfato/metabolismo , ADN/metabolismo , Procesos EstocásticosRESUMEN
The vibrational density of states (VDOS) for water confined on the surface of rutile-TiO(2) nanoparticles has been extracted from low temperature inelastic neutron scattering spectra. Two rutile-TiO(2) nanoparticle samples that differ in their respective levels of hydration, namely TiO(2) x 0.37 H(2)O (1) and TiO(2) x 0.22 H(2)O (2) have been studied. The temperature dependency of the heat capacities for the two samples has been quantified from the VDOS. The results from this study are compared with previously reported data for water confined on anatase-TiO(2) nanoparticles.
Asunto(s)
Nanopartículas/química , Neutrones , Dispersión de Radiación , Titanio/química , Agua/química , Temperatura , Termodinámica , VibraciónRESUMEN
Inelastic Neutron Scattering (INS) spectroscopy has provided a unique insight into the magnetodymanics of nanoscale copper (II) oxide (CuO). We present evidence for the propagation of magnons in the directions of the ordering vectors of both the commensurate and helically modulated incommensurate antiferromagnetic phases of CuO. The temperature dependency of the magnon spin-wave intensity (in the accessible energy-range of the experiment) conforms to the Bose population of states at low temperatures (T ≤ 100 K), as expected for bosons, then intensity significantly increases, with maximum at about 225 K (close to TN), and decreases at higher temperatures. The obtained results can be related to gradual softening of the dispersion curves of magnon spin-waves and decreasing the spin gap with temperature approaching TN on heating, and slow dissipation of the short-range dynamic spin correlations at higher temperatures. However, the intensity of the magnon signal was found to be particle size dependent, and increases with decreasing particle size. This "reverse size effect" is believed to be related to either creation of single-domain particles at the nanoscale, or "superferromagnetism effect" and the formation of collective particle states.
RESUMEN
Low-energy vibrational modes that have a gap in the density of states (DOS) have often been observed in heat capacity data in the form of 'boson' peaks, but the functions used to model these modes are often inadequate or are not physically meaningful. We have adapted the Debye model to represent these gapped modes and have derived the heat capacity equations for these modes in one, two, and three dimensions. Applying these equations to the low-temperature heat capacity data fitting for a large variety of materials substantially improves the fit quality relative to conventional fits. From the fitting parameters, the underlying DOS were estimated, which we show to be comparable to those reported in the literature. This model expands the methods of theoretical low-temperature heat capacity data analysis and improves the procedure of approximating a material's DOS from its low-temperature heat capacity.
RESUMEN
We report an efficient, general methodology for producing high-surface area metal oxide nanomaterials for a vast range of metal oxides, including at least one metal oxide nanomaterial from nearly every transition metal and semi-metal group in the periodic table (groups 3-4 and 6-15) as well as several from the lanthanide group (see ). The method requires only 2-3 simple steps; a hydrated metal salt (usually a nitrate or chloride salt) is ground with bicarbonate (usually NH4HCO3) for 10-30 minutes to form a precursor that is then either untreated or rinsed before being calcined at relatively low temperatures (220-550 °C) for 1-3 hours. The method is thus similar to surfactant-free aqueous methods such as co-precipitation but is unique in that no solvents are added. The resulting "solvent-deficient" environment has interesting and unique consequences, including increased crystallinity of the products over other aqueous methods and a mesoporous nature in the inevitable agglomerates. The products are chemically pure and phase pure with crystallites generally 3-30 nm in average size that aggregate into high surface area, mesoporous agglomerates 50-300 nm in size that would be useful for catalyst and gas sensing applications. The versatility of products and efficiency of the method lend its unique potential for improving the industrial viability of a broad family of useful metal oxide nanomaterials. In this paper, we outline the methodology of the solvent-deficient method using our understanding of its mechanism, and we describe the range and quality of nanomaterials it has produced thus far.
RESUMEN
The buffer used during horse spleen ferritin iron loading significantly influences the mineralization process and the quantity of iron deposited in ferritin. Ferritin iron loading in imidazole shows a rapid hyperbolic curve in contrast to iron loading in 3-(N-morpholino)propanesulfonic acid (MOPS), which displays a slower sigmoidal curve. Ferritin iron loading in an equimolar mixture of imidazole and MOPS produces an iron-loading curve that is intermediate between the imidazole and MOPS curves indicating that one buffer does not dominate the reaction mechanism. The UV-visible spectrum of the ferritin mineral has a higher absorbance from 250 to 450 nm when prepared in imidazole buffer than in MOPS buffer. These results suggest that different mineral phases form in ferritin by different loading mechanisms in imidazole and MOPS buffered reactions. Samples of 1500 Fe/ferritin were prepared in MOPS or imidazole buffer and were analyzed for crystallinity and using the electron diffraction capabilities of the electron microscope. The sample prepared in imidazole was significantly more crystalline than the sample prepared in MOPS. X-ray powder diffraction studies showed that small cores (~500 Fe/ferritin) prepared in MOPS or imidazole possess a 2-line ferrihydrite spectrum. As the core size increases the mineral phase begins to change from 2-line to 6-line ferrihydrite with the imidazole sample favoring the 6-line ferrihydrite phase. Taken together, these results suggest that the iron deposition mechanism in ferritin can be controlled by properties of the buffer with samples prepared in imidazole forming a larger, more ordered crystalline mineral than samples prepared in MOPS.
Asunto(s)
Apoferritinas/química , Ferritinas/química , Imidazoles/química , Hierro/química , Morfolinas/química , Animales , Tampones (Química) , Caballos , Cinética , Microscopía Electrónica de Transmisión , Difracción de Polvo , Unión ProteicaRESUMEN
Inelastic neutron scattering has been employed to probe the vibrational density of states of water confined by an oxide surface, namely, nanoparticles of the anatase polymorph of TiO2. The heat capacity of confined water has been measured by adiabatic calorimetry and compared with values derived from the vibrational density of states. Both inelastic neutron scattering and calorimetry demonstrate restricted mobility and lower heat capacity and entropy of confined water as compared to the bulk.
RESUMEN
Silicon micromachined calorimeters ("calorimeter on a chip") are used to measure heat capacities and phase transition enthalpies for thin film, single crystal, and powder samples (5-500 mug). The technology is thus compatible with the small samples produced in multianvil and large diamond anvil cells. Techniques for handling small samples and attaching them to the calorimetric devices have been developed. Initial data illustrate application to CoO and to Fe(2)SiO(4) olivine and spinel, a quenched high pressure phase metastable at ambient conditions. The calorimetric entropy of the olivine-spinel transition in Fe(2)SiO(4) (-16 +/- 5 J/mol.K) is in good agreement with that calculated from phase equilibrium data (-14 +/- 3 J/mol.K). A magnetic transition in iron silicate spinel, detected previously by Mossbauer spectroscopy, is seen in the calorimetric signal.