Solar-Driven Multistage Device Integrating Dropwise Condensation and Guided Water Transport for Efficient Freshwater and Salt Collection.

Interfacial solar vapor generation (ISVG) is an emerging technology to alleviate the global freshwater crisis. However, high-cost, low freshwater collection rate, and salt-blockage issues significantly hinder the practical application of solar-driven desalination devices based on ISVG. Herein, with a low-cost copper plate (CP), nonwoven fabric (NWF), and insulating ethylene-vinyl acetate foam (EVA foam), a multistage device is elaborately fabricated for highly efficient simultaneous freshwater and salt collection. In the designed solar-driven device, a superhydrophobic copper plate (SH-CP) serves as the condensation layer, facilitating rapid mass and heat transfer through dropwise condensation. Moreover, the hydrophilic NWF is designed with rational hydrophobic zones and specific high-salinity solution outlets (Design-NWF) to act as the water evaporation layer and facilitate directional salt collection. As a result, the multistage evaporator with eight stages exhibits a high water collection rate of 2.25 kg m-2 h-1 under 1 sun irradiation. In addition, the desalination device based on the eight-stage evaporator obtains a water collection rate of 13.44 kg m-2 and a salt collection rate of 1.77 kg m-2 per day under natural irradiation. More importantly, it can maintain a steady production for 15 days without obvious performance decay. This bifunctional multistage device provides a feasible and efficient approach for simultaneous desalination and solute collection.

Correction: Zhu et al. Biodegradable and pH Sensitive Peptide Based Hydrogel as Controlled Release System for Antibacterial Wound Dressing Application. Molecules 2018, 23, 3383.

During the course of a review of our publication, we found two errors in Figure 4b and Figure 9 [...].

Contact/Release Coordinated Antibacterial Cotton Fabrics Coated with N-Halamine and Cationic Antibacterial Agent for Durable Bacteria-Killing Application.

Coating a cationic antibacterial layer on the surface of cotton fabric is an effective strategy to provide it with excellent antibacterial properties and to protect humans from bacterial cross-infection. However, washing with anionic detergent will inactivate the cationic antibacterial coating. Although this problem can be solved by increasing the amount of cationic antibacterial coating, excessive cationic antibacterial coating reduces the drapability of cotton fabric and affects the comfort of wearing it. In this study, a coordinated antibacterial coating strategy based on quaternary ammonium salt and a halogenated amine compound was designed. The results show that the antibacterial effect of the modified cotton fabric was significantly improved. In addition, after mechanically washing the fabric 50 times in the presence of anionic detergent, the antibacterial effect against Staphylococcus aureus and Escherichia coli was still more than 95%. Furthermore, the softness of the obtained cotton fabric showed little change compared with the untreated cotton fabric. This easy-to-implement and cost-effective approach, combined with the cationic contact and the release effect of antibacterial agents, can endow cotton textiles with durable antibacterial properties and excellent wearability.

Charge-Storage Aromatic Amino Compounds for Nonvolatile Organic Transistor Memory Devices.

Here, charge-storage nonvolatile organic field-effect transistor (OFET) memory devices based on interfacial self-assembled molecules are proposed. The functional molecules contain various aromatic amino moieties (N-phenyl-N-pyridyl amino- (PyPN), N-phenyl amino- (PN), and N,N-diphenyl amino- (DPN)) which are linked by a propyl chain to a triethoxysilyl anchor group and act as the interface modifiers and the charge-storage elements. The PyPN-containing pentacene-based memory device (denoted as PyPN device) presents the memory window of 48.43 V, while PN and DPN devices show the memory windows of 24.88 and 8.34 V, respectively. The memory characteristic of the PyPN device can remain stable along with 150 continuous write-read-erase-read cycles. The morphology analysis confirms that three interfacial layers show aggregation due to the N atomic self-catalysis and hydrogen bonding effects. The large aggregate-covered PyPN layer has the full contact area with the pentacene molecules, leading to the high memory performance. In addition, the energy level matching between PyPN molecules and pentacene creates the smallest tunneling barrier and facilitates the injection of the hole carriers from pentacene to the PyPN layer. The experimental memory characteristics are well in agreement with the computational calculation.

Biodegradable and pH Sensitive Peptide Based Hydrogel as Controlled Release System for Antibacterial Wound Dressing Application.

The stimuli-sensitive and biodegradable hydrogels are promising biomaterials as controlled drug delivery systems for diverse biomedical applications. In this study, we construct hybrid hydrogels combined with peptide-based bis-acrylate and acrylic acid (AAc). The peptide-based bis-acrylate/AAc hybrid hydrogel displays an interconnected and porous structure by scanning electron microscopy (SEM) observation and exhibits pH-dependent swelling property. The biodegradation of hybrid hydrogels was characterized by SEM and weight loss, and the results showed the hydrogels have a good enzymatic biodegradation property. The mechanical and cytotoxicity properties of the hydrogels were also tested. Besides, triclosan was preloaded during the hydrogel formation for drug release and antibacterial studies. In summary, the peptide-based bis-acrylate/AAc hydrogel with stimuli sensitivity and biodegradable property may be excellent candidates as drug delivery systems for antibacterial wound dressing application.

KGRT peptide incorporated hydrogel with antibacterial activity for wound healing by optimizing cellular functions via ERK/eNOS signaling.

Bacterial infected wounds, which is characterized by easy infection, multiple inflammation and slow healing, is a complex symptom, resulting from metabolic disorder of the wound microenvironment. In this study, a series of self-healing double-network hydrogels based on KGRT peptide (Lys-Gly-Arg-Thr) with antibacterial, anti-inflammatory and optimizing cellular functions were designed to promote the healing of infected wounds with full-thickness skin defects. Moreover, the dextran hydrogelintroduces a large number of side chains, which are entangled with each other in the Schiff base network to form an interpenetrating structure. The hydrogel might regulate cell metabolism, differentiation and vascular endothelial growth factor (VEGF) function. Importantly, both in vitro and in vivo data showed that hydrogel not only has good antibacterial properties (99.8 %), but also can eradicate bacterial biofilm, effectively reduce inflammation (down-regulated IL-1ß, TNF-α and ROS) and accelerate chronic wound healing process by speeding-up wound closure, increasing granulation tissue thickness, collagen deposition, angiogenesis (up-regulated CD31). The hydrogel could up-regulate mRNA expression of PI3K, AKT, ERK, eNOS, HIF-1α and VEGF, which were correlated with wound healing. Consistently, the hydrogel could promote infected wounds healing and inhibit inflammation through ERK/eNOS signaling pathway. Collectively, hydrogel has excellent clinical application potential for promoting infected wound healing.

A Composite Fabric with Dual Functions for High-Performance Water Purification.

The dilemma of diminishing freshwater resources caused by water pollution has always impacted human life. Solar-driven interfacial evaporation technology has the potential for freshwater production via solar-driven distillation. However, in solar-driven interfacial evaporation technology, it is difficult to overcome the problem of wastewater containing various contaminants. In this work, we propose a bifunctional fabric created by depositing titanium dioxide@carbon black nanoparticles onto cotton fabric (TiO2@CB/CF). The TiO2@CB/CF has a coupling effect that includes the photothermal effect of CB and photocatalysis of TiO2, and it can not only generate clean water but can also purify contaminated water. The resulting bifunctional fabric can achieve an outstanding water evaporation rate of 1.42 kg m-2 h-1 and a conversion efficiency of 90.4% in methylene blue (MB) solution under one-sun irradiation. Simultaneously, the TiO2@CB/CF demonstrates a high photocatalytic degradation of 57% for MB solution after 2 h with light irradiation. It still shows a good photocatalysis effect, even when reused in an MB solution for eight cycles. Furthermore, the TiO2@CB/CF delivers excellent performance for actual industrial textile dyeing wastewater. This bifunctional fabric has a good application prospect and will provide a novel way to resolve the issue of freshwater scarcity.

Nitric Oxide-Releasing Tryptophan-Based Poly(ester urea)s Electrospun Composite Nanofiber Mats with Antibacterial and Antibiofilm Activities for Infected Wound Healing.

Bacterial biofilms on wounds can lead to ongoing inflammation and delayed reepithelialization, which brings a heavy burden to the medical systems. Nitric oxide based treatment has attracted attention because it is a promising strategy to eliminate biofilms and heal infected wounds. Herein, a series of tryptophan-based poly(ester urea)s with good biodegradation and biocompatibility were developed for the preparation of composite mats by electrospinning. Furthermore, the mats were grafted with a nitric oxide donor (nitrosoglutathione, GSNO) to provide one type of NO loading cargo. The mats were found to have a prolonged NO release profile for 408 h with a maximum release of 1.0 µmol/L, which had a significant effect on killing bacteria and destructing biofilms. The designed mats were demonstrated to promote the growth of cells, regulate inflammatory factors, and significantly improve collagen deposition in the wound, eventually accelerating wound-size reduction. Thus, the studies presented herein provide insights into the production of NO-releasing wound dressings and support the application of full-thickness wound healing.

Mussel-inspired multifunctional hydrogel dressing with hemostasis, hypoglycemic, photothermal antibacterial properties on diabetic wounds.

To meticulously establish an efficient photothermal multifunctional hydrogel dressing is a prospective strategy for the treatment of diabetic chronic wounds. Herein, glucose oxidase (GOx) was added to polydopamine/acrylamide (PDA/AM) hydrogels to reduce hyperglycemia to a normal level (3.9-6.1 mmol L-1) and enhance compressive properties (55 kPa) and adhesive properties (32.69 kPa), which are capable of hemostasis in the wound. Then, MnO2 nanoparticles were encapsulated into a polydopamine/acrylamide (PDA/AM) hydrogel, endowing it with excellent antibacterial properties (E. coli and S. aureus were 97.87% and 99.99%) under the irradiation of 808 nm NIR; meanwhile, the biofilm was eliminated completely. Besides, O2 was generated (18 mg mL-1) by the decomposition of H2O2 under the catalysis of MnO2, which could accelerate the formation of angiogenesis and promote the crawling and proliferation of cells. Furthermore, the diabetic wound in vivo treated with the PDA/AM/GOx/MnO2 hydrogel had a less inflammatory response and faster healing speed, which was completely healed in 14 days. Therefore, the multifunctional hydrogels with the capability of high compressible, hemostasis, antibacterial, hyperglycemia manipulation, and O2 generation, demonstrate promise in diabetic chronic wound dressing.

Fabrication of eco-friendly and efficient flame retardant modified cellulose with antibacterial property.

Flame retardant and antibacterial investigation of cellulose has attracted more and more attention. In order to improve the modification efficiency, inspired by multiple hydrogen bonding in spider silk, flame retardant and antibacterial dual function modified cellulose was achieved by multi structure hydrogen bonding in this research. A novel nano SiO2 based Schiff base flame retardant (SiAPH) and dodecyl quaternary ammonium salt (HDAC) were synthesized. Tannin (TA) was introduced as medium to provide synergistic flame retardant and antibacterial with SiAPH and HDAC. The flame retardancy assessment demonstrated that the limiting oxygen index (LOI) of modified cotton fabrics increased from 18% to 26.1%, and the peak of heat release rate (pHRR) decreased by 41.0%, UL-94 vertical combustion proved the modified cotton fabrics had capability of self-extinguishing. The antibacterial of modified fabrics were confirmed against Staphylococcus aureus and Escherichia coli, and the inhibition rate reached to 99.1%. In addition, it worth noting that the biocompatibility and antibacterial activity of modified fabrics were evaluated via MTS assay and establishment of animal wound model. Low toxicity of the fabrics was verified by the L929 fibroblast cells. The anti-infection experiment model showed that the modified fabrics had a positive effect on prevention of infection, and the wound healing rate reached to 86.8% after 14 days' treatment. The flame retardancy, antibacterial and biocompatibility of the functional cotton fabrics indicated that they were ideal candidate for applications of vehicle interior, soft decoration in public and medical scene.

Multifunctional hydrogel platform for biofilm scavenging and O2 generating with photothermal effect on diabetic chronic wound healing.

Diabetic wound treatment remains a major challenge due to the difficulties of eliminating bacterial biofilm and relieving wound hypoxia. To address these issues simultaneously, a multifunctional Dex-SA-AEMA/MnO2/PDA (DSAMP) hydrogel platform was developed with excellent biocompatibility and porous structure. The hydrogel could absorb the exudate, maintain humidity and permeate oxygen, which was prepared by encapsulating polydopamine (PDA) and manganese dioxide (MnO2) into Dex-SA-AEMA (DSA) hydrogel by UV irradiation. With the addition of PDA, the DSAMP hydrogel was proved to eliminate the biofilm after NIR photodynamic therapy (PTT, 808 nm) irradiation at 54 °C. Furthermore, in order to mitigate hypoxia wound microenvironment, MnO2 nanoparticles were added to convert the endogenous hydrogen peroxide (H2O2) into oxygen (O2, 16 mg L-1). The diabetic wound in vivo treated by DSAMP hydrogel was completely healed on 14 days. It was revealed that the DSAMP hydrogel possessed a great potential as dressing for diabetic chronic wound healing.

Phenylalanine-based poly(ester urea)s composite films with nitric oxide-releasing capability for anti-biofilm and infected wound healing applications.

Infected wounds show delayed and incomplete healing processes and even render patients at a high risk of death due to the formed bacterial biofilms in the wound site, which protect bacteria against antimicrobial treatments and immune response. Nitric oxide based therapy is considered a promising strategy for eliminating biofilms and enhancing wound healing, which encounters a significant challenge of controlling the NO release behavior at the wound site. Herein, a kind of phenylalanine based poly(ester urea)s with high thermal stability are synthesized and fabricated to electrospun films as NO loading vehicle for infected wound treatment. The resultant films can continuously and stably release nitric oxide for 360 h with a total concentration of 1.15 µmol L-1, which presents obvious advantages in killing the bacteria and removing biofilms. The results exhibit the films have no cytotoxicity and may accelerate the wound repair without causing inflammation, hemolysis, or cytotoxic reactions as well as stimulate the proliferation of fibroblasts and increase the synthesis of collagen. Therefore, the films may be a suitable NO releasing dressing for removing biofilms and repairing infected wounds.

Dose-Dependent Effects of Royal Jelly on Estrogen- and Progesterone-Induced Mammary Gland Hyperplasia in Rats.

SCOPE: Royal jelly (RJ) has a wide range of biological functions, its effect on hyperplasia of the mammary gland (HMG) in mammals is unclear. This study aims to investigate the effect of RJ on HMG and the dose-response relationship of RJ in the treatment of HMG. METHODS AND RESULTS: HMG rats are induced by intramuscular injection of estrogen (E2) and progesterone, and are treated with different doses of RJ (100, 200, 400, and 800 mg kg-1 d-1 ). As a result, RJ improves the expansion of acinar and breast tissue ducts, particularly at 100 and 800 mg kg-1 d-1 . These two doses also inhibit serum E2 and prolactin (PRL) secretion and increase serum progesterone secretion and the expression of estrogen receptor (ER)-ß in the breast tissue. In addition, 800 mg kg-1 d-1 decrease and increase the mRNA expression of, respectively, hypothalamic gonadotropin-releasing hormone (GnRH) and pituitary GnRH receptors (GnRH-R). The lowest dosage (100 mg kg-1 d-1 ) increases GnRH-R mRNA expression as well. However, the effects of 200 and 400 mg kg-1 d-1 RJ on the reproductive parameters of HMG are not significant, implying a dose-dependent effect. CONCLUSION: RJ regulates endocrine dyscrasia in HMG rats and improves the breast tissue structure, indicating its potential in the prevention and treatment on HMG.

Water-stable zirconium-based metal-organic frameworks armed polyvinyl alcohol nanofibrous membrane with enhanced antibacterial therapy for wound healing.

Inadequate water-stability and antibacterial activity limit the biomedical application of polyvinyl alcohol (PVA)-based membranes in moist environments. In this work, we propose a strategy to improve the water-stability of PVA membranes via metal complexation and heat treatment. We report a simple routine where the zirconium-based UiO-66-NH2 metal-organic frameworks (MOFs) are nucleated as a layer on the surface of PVA nanofibrous membranes (UiO-66-NH2@PVA NFMs). We find that the chemical modification of membranes increases their hydrophilicity and adds on mechanical support for the brittle UiO-66-NH2 MOFs. Additionally, we demonstrate the application of UiO-66-NH2 MOFs as drug carriers for antibacterial drug, levofloxacin (LV). The active drug component is preloaded during the one-step nucleation process. The obtained LV loaded UiO-66-NH2@PVA NFMs (LV@UiO-66-NH2@PVA) are shown to be bactericidal with the efficiency > 99.9% at 100 µg/mL against two bacterial species, Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). Compared with the commercially available gauzes, the UiO-66-NH2@PVA and LV@UiO-66-NH2@PVA treatments will significantly improve the wound healing process. Animal studies show that the LV@UiO-66-NH2@PVA will effectively offer a safe alternative solution for the patients to protect against bacterial infections, demonstrating the potential application of MOF-based NFMs as wound dressing agents.

Nanofibers reinforced injectable hydrogel with self-healing, antibacterial, and hemostatic properties for chronic wound healing.

The chronic wounds often hinder wound healing resulting from infection; thus, an ideal wound dressing should be able to maintain a healthy wound microenvironment. Herein, peptide modified nanofibers reinforced hydrogel has been designed by Schiff base dynamic crosslinking. The incorporation of the nanofibers into the hydrogel extremely enhances the stability and mechanical strength of the hydrogel. Taking advantage of the feature, the reinforced hydrogel can restore its original shape while suffering the various external forces on the hydrogel-covered irregular shape wounds. The peptide modified nanofibers reinforced hydrogel (NFRH) not only possesses injectable and self-healing properties, but also inherent antibacterial and hemostatic properties, which can eradicate the bacterial biofilms and induce blood cells and platelets aggregation and finally accelerate the chronic wound healing process. The peptide modified nanofibers reinforced hydrogel has enormous potential to be novel dressing for chronic wounds healing clinically.

Porphyrin and galactosyl conjugated micelles for targeting photodynamic therapy.

PURPOSE: To study the targeting and photodynamic therapy efficiency of porphyrin and galactosyl conjugated micelles based on amphiphilic copolymer galactosyl and mono-aminoporphyrin (APP) incoporated poly(2-aminoethyl methacrylate)-polycaprolactone (Gal-APP-PAEMA-PCL). METHODS: Poly(2-aminoethyl methacrylate)-polycaprolactone (PAEMA-PCL) was synthesized by the combination of ring opening polymerization and reversible addition-fragmentation chain transfer (RAFT) polymerization, and then Gal-APP-PAEMA-PCL was obtained after conjugation of lactobionic acid and 5-(4-aminophenyl)-10,15,20-triphenylporphyrin (APP) to PAEMA-PCL. The chemical structures of the copolymers were characterized, and their biological properties were evaluated in human laryngeal carcinoma (HEp2) and human hepatocellular liver carcinoma (HepG2) cells. RESULTS: Both APP-PAEMA-PCL and Gal-APP-PAEMA-PCL did not exhibit dark cytotoxicity to HEp2 cells and HepG2 cells. However, Gal-APP-PAEMA-PCL was taken up selectively by HepG2 cells and had the higher phototoxicity effect. Both polymers preferentially localized within cellular vesicles that correlated to the lysosomes. CONCLUSIONS: The results indicated that porphyrin and galactosyl conjugated polymer micelles exhibited higher targeting and photodynamic therapy efficacy in HepG2 cells than in HEp2 cells.

Injectable hydrogel helps bone marrow-derived mononuclear cells restore infarcted myocardium.

BACKGROUNDS: Experimental and clinical studies have suggested that cell implantation could improve cardiac function after myocardial infarction (MI). However, this technique was limited by decreased engraftment and survival of transplanted cells within the ischemic tissue. The present study was performed to investigate whether implantation of bone marrow-derived mononuclear cells (BMMNCs) encapsulated in hydrogel could increase cell engraftment and help to restore cardiac function of MI rabbits. METHODS: MI was induced in rabbits by coronary artery ligation. One week later, cell culture medium, Dex-PCL-HEMA/PNIPAAm hydrogel, BMMNCs in medium or BMMNCs in hydrogel were injected into the infarcted area of the left ventricle (LV). RESULTS: Increased cell engraftment was observed 48 h after injection when cells were encapsulated in hydrogel; 30 days after treatment, echocardiographic studies showed that injection of BMMNCs in hydrogel preserved LV ejection fraction and attenuated LV dilatation compared with other groups. Histological analysis indicated that injection of BMMNCs in hydrogel enhanced neovascular formation and prevented scar expansion compared with the other groups. CONCLUSION: Injection of hydrogel-encapsulated BMMNCs increased cell engraftment and improved LV function; this technique may serve as an effective approach to restore infarcted myocardium.

One-pot fabrication of antibacterial ß-cyclodextrin-based nanoparticles and their superfast, broad-spectrum adsorption towards pollutants.

The current water treatment technology is still based on low energy efficient processes due to the complex composition of wastewater. To achieve high energy efficiency, many micro-porous materials with complex functional groups have been fabricated because of their high pollutant adsorption capabilities. In this work, antibacterial ß-cyclodextrin-based nanoparticles (E-ß-CDN) were prepared via one-pot method to explore their adsorption performance to pollutants in wastewater. The resulting nanoparticles exhibited superfast adsorption kinetics to pollutants with removal efficiency of over 95% within 10 s. The nanoparticles also presented broad-spectrum adsorption to organic pollutants and heavy metal ions, and their maximum adsorption capacity was 3289.6 mg g-1 towards methyl orange (MO) and 970.8 mg g-1 towards Pb(II), much higher than that of many other adsorbents. Easy cyclic adsorption-desorption was another distinguishing feature of the nanoparticles, whose removal efficiency to these pollutants hardly varied after 10 cycles of regeneration. Interestingly, the resulting nanoparticles showed prominent antibacterial activity of 99.99% bacterial inhibitive rate against both gram-negative bacteria Escherichia coli (E. coli) and gram-positive bacteria Staphylococcus aureus (S. aureus). These results suggest that the resulting nanoparticles have great potential in the purification of the wastewater.

High-efficiency and recyclability of ramie degumming catalyzed by FeCl3 in organic solvent.

Although traditional alkaline (TAL) process for ramie degumming is commonly used in the industry, it causes severe environmental concerns. In this work, an emerging organic solvent degumming process utilizing FeCl3 catalyst (FeCl3-OS) was developed in one step. The influences of FeCl3-OS system on fiber properties (e.g. residual gum content, tenacity, degree of polymerization (DP), etc.) were evaluated, and the recyclability of degumming solution was also studied. The results indicated that ramie fiber could be isolated with FeCl3-OS treatment (FeCl3 1.0 %, 200 ℃, 121 min), and the tenacity and residual gum content of refined fibers were 7.9 cN/dtex and 3.88 %, respectively. Fibers treated in FeCl3-OS system were endowed better moisture sorption (9.2 %) and higher yield (75.2 %) compared with that in TAL system. Moreover, fibers with five cycles' treatment possessed outstanding performances, that was 4.44 cN/dtex of tenacity and 4.33 % of residual gum content, which fulfilled the requirements of the spinning process.

Novel thermosensitive hydrogel injection inhibits post-infarct ventricle remodelling.

AIMS: Myocardial infarction (MI) remains the commonest cause of cardiac-related death throughout the world. Adverse cardiac remodelling and progressive heart failure after MI are associated with excessive and continuous damage of the extracellular matrix (ECM). In this study, we hypothesized that implantation of hydrogel into infarcted myocardium could replace the damaged ECM, thicken the infarcted wall, and inhibit cardiac remodelling. METHODS AND RESULTS: MI was induced in rabbits by coronary artery ligation; 4 days later, 200 microL Dex-PCL-HEMA/PNIPAAm gel solution was injected into the infarcted myocardium. Injection of phosphate-buffered saline served as control. Thirty days after treatment, histological analysis indicated that injection of the biomaterial prevented scar expansion and wall thinning compared with controls. Echocardiography studies showed that injection of hydrogel increased left ventricular ejection fraction and attenuated left ventricular systolic and diastolic dilatation. Haemodynamic analysis demonstrated improved cardiac function following implantation of the hydrogel. CONCLUSION: These results suggest that injection of thermosensitive Dex-PCL-HEMA/PNIPAAm hydrogel is an effective strategy that prevents adverse cardiac remodelling and dysfunction in MI rabbits.