Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 4 de 4
Filtrar
Más filtros

Banco de datos
Tipo de estudio
Tipo del documento
País de afiliación
Intervalo de año de publicación
1.
ACS Omega ; 9(32): 35113-35130, 2024 Aug 13.
Artículo en Inglés | MEDLINE | ID: mdl-39157120

RESUMEN

The micropore structure of tight sandstone affects the efficiency of CO2 displacement of crude oil. As the pressure changes, the oil displacement efficiency (E d) in segments with different pore radii changes, and the asphaltene precipitation in the pores causes alterations in the pore structure and wettability, which constrain E d. Ten samples of tight sandstone from the Yanchang Formation in the Ordos Basin were selected for this study. A variety of methods, including X-ray diffraction (XRD), casting thin sections (CTS), scanning electron microscopy (SEM), high-pressure mercury intrusion (HPMI), CT scanning, and nuclear magnetic resonance (NMR) combined with CO2 displacement, were used to study the efficiency of crude oil utilization and the amount of asphaltene deposited at different pore-throat radii, and then the impacts of pressure, pore structure, and wettability changes on E d were discussed. The findings indicate that samples have three types: macropore-fine throats (MF), medium pore-tiny throats (MT), and small pore-microthroats (SM). The MT exhibits a favorable configuration. The pore-throat radius of each sample can be divided into two segments, namely, large pore segments (PL) and small pore segments (PS), and the PL has a significant E d. The E d of the MF-type PS is constrained by pressure. The E d of PL is significantly affected by the pressure sensitivity for the MT, while the E d of PL for the SM structure is more affected by pressure. Changes in wettability and the precipitation of asphaltene are the results of the reaction between crude oil and CO2. In the MF, asphaltene precipitates from the PL, while in the MT and SM, asphaltene precipitates both from the PL and PS. The amount of asphaltene precipitation strongly affects the E d in PS. The oil wettability increases more obviously with better pore-throat configurations. This study offers a reference and foundational understanding for evaluating CO2 displacement in tight sandstone reservoirs.

2.
Membranes (Basel) ; 13(9)2023 Sep 18.
Artículo en Inglés | MEDLINE | ID: mdl-37755224

RESUMEN

For decades, tissue regeneration has been a challenging issue in scientific modeling and human practices. Although many conventional therapies are already used to treat burns, muscle injuries, bone defects, and hair follicle injuries, there remains an urgent need for better healing effects in skin, bone, and other unique tissues. Recent advances in three-dimensional (3D) printing and real-time monitoring technologies have enabled the creation of tissue-like membranes and the provision of an appropriate microenvironment. Using tissue engineering methods incorporating 3D printing technologies and biomaterials for the extracellular matrix (ECM) containing scaffolds can be used to construct a precisely distributed artificial membrane. Moreover, advances in smart sensors have facilitated the development of tissue regeneration. Various smart sensors may monitor the recovery of the wound process in different aspects, and some may spontaneously give feedback to the wound sites by releasing biological factors. The combination of the detection of smart sensors and individualized membrane design in the healing process shows enormous potential for wound dressings. Here, we provide an overview of the advantages of 3D printing and conventional therapies in tissue engineering. We also shed light on different types of 3D printing technology, biomaterials, and sensors to describe effective methods for use in skin and other tissue regeneration, highlighting their strengths and limitations. Finally, we highlight the value of 3D bioengineered membranes in various fields, including the modeling of disease, organ-on-a-chip, and drug development.

3.
Microorganisms ; 11(12)2023 Nov 26.
Artículo en Inglés | MEDLINE | ID: mdl-38138006

RESUMEN

Petroleum microorganisms play a crucial role in the application of microbial-enhanced oil recovery, and the community structures of petroleum microorganisms have been widely studied. Due to variations in reservoir geological conditions, reservoir microbial communities exhibit unique characteristics. However, previous studies have primarily focused on microbial community changes within a single well, a single block, and before and after water flooding, and thus, cross-horizon and cross-regional comparative studies of in situ microbial communities are lacking. In this study, the 16S rRNA full-length sequencing method was adopted to study bacterial communities in crude oil samples taken from two wells at the same depths (depths of 2425 m and 2412 m) but approximately 20 km apart in the Hujianshan oilfield, located in the Ordos Basin. At the same time, the results were combined with another layer of research data from another article (from a depth of 2140 m). The aim was to compare the differences in the microbial community structures between the oil wells on a horizontal scale and a vertical scale. The results revealed that there were minimal differences in the microbial community structures that were influenced by the horizontal distances within a small range (<20 km), while differences were observed at a larger spatial scale. However, the dominant bacteria (Proteobacteria and Bacteroidetes) in the different oilfields were similar. Vertical depth variations (>300 m) had significant impacts on the communities, and this was mainly controlled by temperature. The greater the depth, the higher formation temperature, leading to an increase in thermophilic and anaerobic bacteria within a community.

4.
Microorganisms ; 11(11)2023 Nov 09.
Artículo en Inglés | MEDLINE | ID: mdl-38004748

RESUMEN

Performance evaluation of microorganisms that have emulsifying and degrading effects on crude oil has been extensively conducted in the laboratory. However, the ultimate goal of microbial enhanced oil recovery is field application, so the pilot simulation experiments are crucial. In this study, a micro-visualization model and the real cores were chosen to investigate the actual recovery efficiency and the mechanism of the consortium bacteria B-ALL, which has been proven to have good emulsification and degradation effects in lab studies in porous media. At the same time, the cast thin sections and rate-controlled porosimetry were combined to analyze the pore throat structure of the displacement core. It was found that the recovery efficiency was positively correlated with the microbial injection volume as well as the incubation time. For the microscopic model with high pores and high permeability, the efficiency of secondary water flooding can be increased by 44.77% after six days of incubation with two pore volume microbes. For the real tight cores, the maximum secondary water flooding efficiency under the same condition was 6.98%. Through visual modeling, microorganisms increase the oil washing efficiency mainly by emulsification and changing the wettability. The generated oil droplets will play a role in plugging and improving the wave efficiency. However, tight reservoirs have the characteristics of large pores and small throats, and curved and necking throats are developed, greatly reducing permeability. The microbial recovery efficiency was lower under shorter cultivation times. This study provides a practical basis for the application of consortium bacteria in tight oil fields to enhance recovery.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA