RESUMEN
The Gram-positive bacterium Paenibacillus taichungensis NC1 was isolated from the Zijin gold-copper mine and shown to display high resistance to arsenic (MICs of 10 mM for arsenite in minimal medium). Genome sequencing indicated the presence of a number of potential arsenic resistance determinants in NC1. Global transcriptomic analysis under arsenic stress showed that NC1 not only directly upregulated genes in an arsenic resistance operon but also responded to arsenic toxicity by increasing the expression of genes encoding antioxidant functions, such as cat, perR, and gpx. In addition, two highly expressed genes, marR and arsV, encoding a putative flavin-dependent monooxygenase and located adjacent to the ars resistance operon, were highly induced by As(III) exposure and conferred resistance to arsenic and antimony compounds. Interestingly, the zinc scarcity response was induced under exposure to high concentrations of arsenite, and genes responsible for iron uptake were downregulated, possibly to cope with oxidative stress associated with As toxicity. IMPORTANCE Microbes have the ability to adapt and respond to a variety of conditions. To better understand these processes, we isolated the arsenic-resistant Gram-positive bacterium Paenibacillus taichungensis NC1 from a gold-copper mine. The transcriptome responding to arsenite exposure showed induction of not only genes encoding arsenic resistance determinants but also genes involved in the zinc scarcity response. In addition, many genes encoding functions involved in iron uptake were downregulated. These results help to understand how bacteria integrate specific responses to arsenite exposure with broader physiological responses.
Asunto(s)
Arsénico , Arsenitos , Arsénico/metabolismo , Arsénico/toxicidad , Arsenitos/metabolismo , Arsenitos/toxicidad , Proteínas Bacterianas/genética , Proteínas Bacterianas/metabolismo , Cobre , Oro , Hierro , Operón , Paenibacillus , ZincRESUMEN
Cyanide tailings are the major hazardous wastes generated in the production process of the gold industry, which not only contain highly toxic cyanide, but also contain heavy metals with recycling value and other substances suitable for building materials or filling. These tailings are in urgent need of purification treatment and safe utilization. In this study, the impacts of treatment methods, types and combinations of reagents on decyanation effect were researched. Gold in cyanide tailings was recovered by flotation, and flotation tailings were used for filling after identifying the properties of solid waste. Results are as follows: (1) INCO method and 5 reagents (sodium sulfite, sodium persulfate, copper sulfate, ferrous sulfate and zinc sulfate) were selected for synergistic decyanation treatment, and cyanide concents in slurry and leaching solution were decreased to the minimum. (2) The gold recovery rate of the tailings through flotation was increased by 27.8% than without detoxification. (3) Flotation tailings were identified as general industrial solid wastes by leaching toxicity and toxic substance content analysis. (4) As filling aggregate, under the conditions of slurry concentration of 63% and cement-sand ratio of 1:6, the strength filling body of flotation tailings reached 1.32 Mpa after 28 days of maintenance. (5) This process and combined reagents were applied to engineering. The cyanide content in the leaching solution and the flotation recovery rate of gold were kept below 0.2 mg/L and above 60% respectively, and the strength of the filling body was stable to meet the requirements of underground filling.
Asunto(s)
Cianuros , Residuos Industriales , Cianuros/análisis , Indicadores y Reactivos , Residuos Industriales/análisis , Oro/análisisRESUMEN
Cyanide tailings are the bulk solid waste generated by the production processes of gold mines. Since the highly toxicity of cyanide affects its disposal and comprehensive utilization, a decyanation treatment is needed. However, wide-ranging industrial uses of the current decyanation methods are restricted due to the treatment effects and costs. Based on the natural degradation method, the cyanide treatment effect was enhanced by raising the treatment temperature, increasing the ultraviolet (UV) irradiation and turning the pile periodically. Using the Arrhenius equation, the activation energies of the cyanide hydrolysis reactions were calculated as 52.22 kJ/mol and 34.59 kJ/mol for heating alone and for heating combined with UV irradiation, respectively. At 60 â, the cyanide tailings reached the discharge standard (leachate, total cyanide (CNt)< 5 mg/L) after 8 h of treatment. Moreover, after adding UV irradiation (with an intensity of 120 µW/cm2) and a hydrogen peroxide spray (spraying intensity, 2 mL/kg) to the above conditions and shortening the treatment time to 7 h, the cyanide tailings reached the standard for use in building materials (leachate, CNt <0.5 mg/L). Based on these results, UV irradiation, ventilation, spraying and pile-turning were integrated into the solar drying room to form an enhanced natural degradation system, which was applied in the semi-industrial scale treatment of the cyanide tailings. The results showed that the cyanide tailings consistently met the standards for discharge and use in building materials, successfully verified the conditions and effects of the laboratory treatment, and reduced the treatment cost by more than 50 %.
RESUMEN
The development of high efficient photocatalysts for antibiotics contamination in water remains a severe challenge. In this study, a novel step-scheme (S-scheme) photocatalytic heterojunction nanocomposites were fabricated from integrating AgCl nanoparticles on the MIL-100(Fe) octahedron surface through facile multi-stage stirring strategy. The S-scheme heterojunction structure in AgCl/MIL-100(Fe) (AM) nanocomposite provided a more rational utilization of electrons (e-) and holes (h+), accelerated the carrier transport at the junction interface, and enhanced the overall photocatalytic performance of nanomaterials. The visible-light-driven photocatalysts were used to degrade sulfamethazine (SMZ) which attained a high removal efficiency (99.9%). The reaction mechanisms of SMZ degradation in the AM photocatalytic system were explored by electron spin resonance (ESR) and active species capture experiments, which superoxide radical (â¢O2-), hydroxyl radical (â¢OH), and h+ performed as major roles. More importantly, the SMZ degradation pathway and toxicity assessment were proposed. There were four main pathways of SMZ degradation, including the processes of oxidation, hydroxylation, denitrification, and desulfonation. The toxicity of the final products in each pathway was lower than that of the parent according to the toxicity evaluation results. Therefore, this work might provide new insights into the environmentally-friendly photocatalytic processes of S-scheme AM nanocomposites for the efficient degradation of antibiotics pollutants.