The Effects of Residual Femoral Deformity on Computed Contact Mechanics in Patients Treated With In Situ Fixation for Slipped Capital Femoral Epiphysis.

OBJECTIVE: In situ fixation for treatment of slipped capital femoral epiphysis (SCFE) can stabilize the epiphysis and prevent further joint deformation but often leaves residual deformity that may adversely affect intra-articular contact mechanics. The purpose of this study was to investigate the relationship between residual deformity and contact mechanics in the post-SCFE hip. METHODS: Patient-specific hip models were created for 19 patients with SCFE treated with in situ fixation. For each model, discrete element analysis was used to compute cumulative acetabular and femoral contact stress exposure during a walking gait cycle. Slip severity was evaluated for each patient using the two-dimensional Southwick angle and a novel three-dimensional (3D) assessment of multiplanar femoral deformity (3D slip angle). RESULTS: Of the SCFE cases, 2/7 mild (Southwick angle ≤30 degrees) had peak cumulative femoral exposures equivalent to that of severe (Southwick angle ≥60 degrees) cases. Severe SCFE cases had higher peak ( P = 0.015) and mean ( P = 0.028) femoral contact stress exposure and lower cumulative femoral contact area ( P = 0.003) than mild (Southwick angle ≤30 degrees) SCFE cases. Mean femoral contact stress exposure was also higher in severe SCFE cases than in moderate SCFE cases ( P = 0.027). Acetabular and femoral contact mechanics metrics typically demonstrated stronger correlations with 3D slip angle than two-dimensional Southwick angle. CONCLUSIONS: Increased slip severity adversely impacts intra-articular femoral contact mechanics. Contact mechanics metrics demonstrate higher correlations with 3D slip angle, indicating that this novel measurement may better describe global deformity and its relationship to intra-articular mechanics; however, the modest strength of these correlations may also imply that global impingement-generating deformity is not the primary factor driving contact mechanics in the post-SCFE hip. CLINICAL RELEVANCE: Greater slip severity adversely impacts contact mechanics in the post-SCFE hip. However, focal regions of high contact stress were seen even in mild SCFE deformities, suggesting some type of deformity correction should be considered even for mild slips to alleviate secondary impingement, address focal incongruities, and reduce osteoarthritis development/progression.

Automated Nuclear Segmentation in Head and Neck Squamous Cell Carcinoma Pathology Reveals Relationships between Cytometric Features and ESTIMATE Stromal and Immune Scores.

The tumor microenvironment (TME) plays an important role in the progression of head and neck squamous cell carcinoma (HNSCC). Currently, pathologic assessment of TME is nonstandardized and subject to observer bias. Genome-wide transcriptomic approaches to understanding the TME, while less subject to bias, are expensive and not currently a part of the standard of care for HNSCC. To identify pathology-based biomarkers that correlate with genomic and transcriptomic signatures of TME in HNSCC, cytometric feature maps were generated in a publicly available data set from a cohort of patients with HNSCC, including whole-slide tissue images and genomic and transcriptomic phenotyping (N = 49). Cytometric feature maps were generated based on whole-slide nuclear detection, using a deep-learning algorithm trained for StarDist nuclear segmentation. Cytometric features in each patient were compared to transcriptomic measurements, including Estimation of Stromal and Immune Cells in Malignant Tumor Tissues Using Expression Data (ESTIMATE) scores and stemness scores. With correction for multiple comparisons, one feature (nuclear circularity) demonstrated a significant linear correlation with ESTIMATE stromal score. Two features (nuclear maximum and minimum diameter) correlated significantly with ESTIMATE immune score. Three features (nuclear solidity, nuclear minimum diameter, and nuclear circularity) correlated significantly with transcriptomic stemness score. This study provides preliminary evidence that observer-independent, automated tissue-slide analysis can provide insights into the HNSCC TME which correlate with genomic and transcriptomic assessments.

Reductions in Children's Blood Lead Levels from a Drinking-Water Intervention in Madagascar, Sub-Saharan Africa.

One in three children globally is estimated to have blood lead levels (BLL) at or above the BLL reference value of 5 µg/dL with increased burden falling on low- and middle-income countries (LMIC). Within developed countries, aqueous lead is the predominant exposure route. However, aqueous lead exposure is rarely examined in the LMIC, leaving a gap in the literature that ignores a potentially significant route of exposure. Furthermore, limited lead-based remediation efforts around consumer products have been examined. This study investigates the importance of lead exposure from the water supply through a case study in Toamasina, Madagascar. The project measured aqueous lead and BLL of children pre- and postremediation efforts (i.e., removal of leaded pump components in hand pumps) to verify the impact of aqueous lead exposure within this community. Removal of the leaded pump components (i.e., piston and foot valves) and replacement with nonleaded components decreased aqueous lead levels below the World Health Organization provisional guideline of 10 µg/L in all but 4% of pumps tested. Measured BLL concentrations indicated a statistically significant decrease in BLL from pre- to postremediation. Furthermore, the remediation resulted in a decrease in BLL for 87% of children with the greatest changes in BLL observed for children with the highest preremediation concentrations. These findings point to a need for greater consideration of lead in drinking and cooking waters as an important exposure route in LMIC.

Cookstove Emissions and Performance Evaluation Using a New ISO Protocol and Comparison of Results with Previous Test Protocols.

In 2018, the International Organization for Standardization (ISO) 19867-1 "Harmonized laboratory test protocols" were released for establishing improved quality and comparability for data on cookstove air pollutant emissions, efficiency, safety, and durability. This is the first study that compares emissions [carbon dioxide, carbon monoxide, total hydrocarbons, methane, nitrogen oxides, fine particulate matter (PM2.5), organic carbon, elemental carbon, and ultrafine particles] and efficiency data between the ISO protocol and the Water Boiling Test (WBT). The study examines six stove/fuel combinations [liquefied petroleum gas (LPG), pellet, wood fan, wood rocket, three stone fire, and charcoal] tested in the same US EPA laboratory. Evaluation of the ISO protocol shows improvements over previous test protocols and that results are relatively consistent with former WBT data in terms of tier ratings for emissions and efficiency, as defined by the ISO 19867-3 "Voluntary Performance Targets." Most stove types remain similarly ranked using ISO and WBT protocols, except charcoal and LPG are in higher PM2.5 tiers with the ISO protocol. Additionally, emissions data including polycyclic aromatic hydrocarbons are utilized to compare between the ISO and Firepower Sweep Test (FST) protocols. Compared to the FST, the ISO protocol results in generally higher PM2.5 tier ratings.

Benchmarking total knee replacement constructs using noninferiority analysis: the New Zealand joint registry study.

BACKGROUND: The aim of this study was to compare the relative performance of total knee replacement constructs and discern if there is variability in performance in currently commonly used prostheses in the New Zealand Joint Registry (NZJR) using a noninferiority analysis. METHODS: All patients who underwent a primary total knee replacement (TKR) registered in the NZJR between 1st January 1999 to June 2020 were identified. Using a noninferiority analysis, the performance of total knee replacement prostheses were compared with the best performing contemporary construct. Construct all-cause revision rate was estimated using the 1-Kaplan Meier survival function method to estimate net failure. The difference in all-cause revision rates between the contemporary benchmark and all other constructs was tested. RESULTS: In total 110 183 TKR were recorded and 25 constructs (102 717 procedures) had > 500 procedures at risk at 3 years post-primary of which 5 were inferior by at least 20 % relative risk of which, one was inferior by at least 100 % relative risk. 14 constructs were identified with > 500 procedures at risk at 10 years with 5 inferior by at least 20 %, of which 2 were inferior by > 100 % relative risk. CONCLUSIONS: We discerned that there is great variability in construct performance and at all time points, greater than 25 % of constructs are inferior to the best performing construct by at least 20 %. These results can help inform patients, clinicians and health care funders when considering TKR surgery.

Pellet-Fed Gasifier Stoves Approach Gas-Stove Like Performance during in-Home Use in Rwanda.

Nearly all households in Rwanda burn solid fuels for cooking. A private firm in Rwanda is distributing forced-draft pellet-fed semigasifier cookstoves and fuel pellets. We measured in-use emissions of pollutants including fine particulate matter (PM2.5), organic and elemental carbon (OC, EC), black carbon (BC), and carbon monoxide (CO) in 91 uncontrolled cooking tests (UCTs) of both pellet and baseline (wood; charcoal) stoves. We observed >90% reductions in most pollutant emission factors/rates from pellet stoves compared to baseline stoves. Pellet stoves performed far better than gasifier stoves burning unprocessed wood, and consistent with ISO tiers 4 and 5 for PM2.5 and CO, respectively. Pellet stoves were generally clean, but performance varied; emissions from the dirtiest pellet tests matched those from the cleanest traditional stove tests. Our real-time data suggest that events occurring during ignition and the end of testing (e.g., refueling, char burnout) drive high emissions during pellet tests. We use our data to estimate potential health and climate cobenefits from stove adoption. This analysis suggests that pellet stoves have the potential to provide health benefits far above previously tested biomass stoves and approaching modern fuel stoves (e.g., LPG). Net climate impacts of pellet stoves range from similar to LPG to negligible, depending on biomass source and upstream emissions.

The klotho-related protein KLPH (lctl) has preferred expression in lens and is essential for expression of clic5 and normal lens suture formation.

KLPH/lctl belongs to the Klotho family of proteins. Expressed sequence tag analyses unexpectedly revealed that KLPH is highly expressed in the eye lens while northern blots showed that expression is much higher in the eye than in other tissues. In situ hybridization in mouse localized mRNA to the lens, particularly in the equatorial epithelium. Immunofluorescence detected KLPH in lens epithelial cells with highest levels in the germinative/differentiation zone. The gene for KLPH in mouse was deleted by homologous recombination. Littermate knockout (KO) and wild type (WT) mice were compared in a wide panel of pathology examinations and were all grossly normal, showing no systemic effects of the deletion. However, the lens, while superficially normal at young ages, had focusing defects and exhibited age-related cortical cataract by slit lamp examination. Whole-lens imaging showed that KO mice had disorganized lens sutures, forming a loose double-y or x instead of the tight y formation of WT. RNA-seq profiles for KO and WT littermates confirmed the absence of KLPH mRNA in KO lens and also showed complete absence of transcripts for Clic5, a protein associated with cilium/basal body related auditory defects in a mouse model. Immunofluorescence of lens epithelial flat mounts showed that Clic5 localized to cilia/centrosomes. Mice mutant for Clic5 (jitterbug) also had defective sutures. These results suggest that KLPH is required for lens-specific expression of Clic5 and that Clic5 has an important role in the machinery that controls lens fiber cell extension and organization.

Multidisciplinary guidelines for the management of paediatric tracheostomy emergencies.

Temporary and permanent tracheostomies are required in children to manage actual or anticipated long-term ventilatory support, to aid secretion management or to manage fixed upper airway obstruction. Tracheostomies may be required from the first few moments of life, with the majority performed in children < 4 years of age. Although similarities with adult tracheostomies are apparent, there are key differences when managing the routine and emergency care of children with tracheostomies. The National Tracheostomy Safety Project identified the need for structured guidelines to aid multidisciplinary clinical decision making during paediatric tracheostomy emergencies. These guidelines describe the development of a bespoke emergency management algorithm and supporting resources. Our aim is to reduce the frequency, nature and severity of paediatric tracheostomy emergencies through preparation and education of staff, parents, carers and patients.

Predicted shortage of vascular surgeons in the United Kingdom: A matter for debate?

BACKGROUND: Vascular surgery became a new independent surgical specialty in the United Kingdom (UK) in 2013. In this matter for debate we discuss the question, is there a "shortage of vascular surgeons in the United Kingdom?" MATERIALS AND METHODS: We used data derived from the "Vascular Surgery United Kingdom Workforce Survey 2014", NHS Employers Electronic Staff Records (ESR), and the National Vascular Registry (NVR) surgeon-level public report to estimate current and predict future workforce requirements. RESULTS: We estimate there are approximately 458 Consultant Vascular Surgeons for the current UK population of 63 million, or 1 per 137,000 population. In several UK Regions there are a large number of relatively small teams (3 or less) of vascular surgeons working in separate NHS Trusts in close geographical proximity. In developed countries, both the number and complexity of vascular surgery procedures (open and endovascular) per capita population is increasing, and concerns have been raised that demand cannot be met without a significant expansion in numbers of vascular surgeons. Additional workforce demand arises from the impact of population growth and changes in surgical work-patterns with respect to gender, working-life-balance and 7-day services. CONCLUSIONS: We predict a future shortage of Consultant Vascular Surgeons in the UK and recommend an increase in training numbers and an expansion in the UK Consultant Vascular Surgeon workforce to accommodate population growth, facilitate changes in work-patterns and to create safe sustainable services.

The vascular surgery workforce: a survey of consultant vascular surgeons in the UK, 2014.

OBJECTIVE: The purpose of this study was to describe the demographics, training, and practice characteristics of consultant vascular surgeons across the UK to provide an assessment of current, and inform future prediction of workforce needs. METHODS: A questionnaire was developed using a modified Delphi process to generate questionnaire items. The questionnaire was emailed to all consultant vascular surgeons (n = 450) in the UK who were members of the Vascular Society of Great Britain & Ireland. RESULTS: 352 consultant vascular surgeons from 95 hospital trusts across the UK completed the survey (78% response rate). The mean age was 50.6 years old, the majority (62%) were mid-career, but 24% were above the age of 55. Currently, 92% are men and only 8% women. 93% work full-time, with 60% working >50 hours, and 21% working >60 hours per week. The average team was 5 to 6 (range 2-10) vascular surgeons, with 23% working in a large team of ≥8. 17% still work in small teams of ≤3. Over 90% of consultant vascular surgeons perform the major index vascular surgery procedures (aneurysm repair, carotid endarterectomy, infra-inguinal bypass, amputation). While 84% perform standard endovascular abdominal aortic aneurysm repair (EVAR), <50% perform more complex endovascular aortic therapy. The majority of vascular surgeons "like their job" (85%) and are "satisfied" (69%) with their job. 34% of consultant vascular surgeons indicated they were "extremely likely" to retire within the next 10 years. CONCLUSIONS: This study provides the first detailed analysis of the new specialty of vascular surgery as practiced in the UK. There is a need to plan for a significant expansion in the consultant vascular surgeon workforce in the UK over the next 10 years to maintain the status quo.

Providing formal reports for outside imaging and the rate of repeat imaging.

OBJECTIVE: The purpose of this study is to assess whether providing a formal report for outside imaging reduces repeat imaging. MATERIALS AND METHODS: From January 1, 2006, through December 31, 2011, patients transferred with an abdominal CT from another ("outside") institution that was imported to our institution's PACS within 60 days of the original CT were considered. Repeat imaging was defined as when an abdominal CT performed at another institution was followed by the same study at our institution in the 14 days after import to PACS. The rate of repeat imaging was compared between patients whose outside imaging did and did not receive a formal report from our radiologists. RESULTS: Consecutive patients (n = 10,330) who imported an outside abdominal CT to our PACS were considered. Thirty-six percent (3719/10,330) received a formal report. These patients were 32% less likely than the other patients to undergo repeat imaging (9.4% [350/3719] vs 14% [919/6611]; p < 0.001). The odds of repeat imaging were statistically significantly lower for patients who received a formal report after adjusting for potential confounding variables, including the age of the outside imaging study and the referring specialty (multivariate odds ratio, 0.53; 95% CI, 0.47-0.61; p < 0.001). CONCLUSION: Patients who received a formal report for their outside abdominal CT examinations were less likely to have repeat imaging. Institutions, payers, and policy makers should consider providing and supporting formal reports for outside imaging.

Development of a chemical kinetic model for a biosolids fluidized-bed gasifier and the effects of operating parameters on syngas quality.

In an effort to decrease the land disposal of sewage sludge biosolids and to recover energy, gasification has become a viable option for the treatment of waste biosolids. The process of gasification involves the drying and devolatilization and partial oxidation of biosolids, followed closely by the reduction of the organic gases and char in a single vessel. The products of gasification include a gaseous fuel composed largely of N2, H2O, CO2, CO, H2, CH4, and tars, as well as ash and unburned solid carbon. A mathematical model was developed using published devolatilization, oxidation, and reduction reactions, and calibrated using data from three different experimental studies of laboratory-scale fluidized-bed sewage sludge gasifiers reported in the literature. The model predicts syngas production rate, composition, and temperature as functions of the biosolids composition and feed rate, the air input rate, and gasifier bottom temperature. Several data sets from the three independent literature sources were reserved for model validation, with a focus placed on five species of interest (CO, CO2, H2, CH4, and C6H6). The syngas composition predictions from the model compared well with experimental results from the literature. A sensitivity analysis on the most important operating parameters of a gasifier (bed temperature and equivalence ratio) was performed as well, with the results of the analysis offering insight into the operations of a biosolids gasifier.

Metastatic Renal Cell Carcinoma in a Patient With Autosomal Dominant Polycystic Kidney Disease.

ABSTRACT: Autosomal dominant polycystic kidney disease (ADPKD) manifests as multiple cysts in the kidneys and liver but can also present with musculoskeletal and cardiovascular abnormalities. ADPKD patients are at increased risk for renal cell carcinoma development. We show the FDG PET/CT findings in a patient with renal cell carcinoma secondary to ADPKD and complicated by worsening pulmonary metastasis. The primary renal tumor shows intense FDG uptake despite no suspicious features with contrast CT.

Quantifying functional group compositions of household fuel-burning emissions.

Globally, billions of people burn fuels indoors for cooking and heating, which contributes to millions of chronic illnesses and premature deaths annually. Additionally, residential burning contributes significantly to black carbon emissions, which have the highest global warming impacts after carbon dioxide and methane. In this study, we use Fourier transform infrared spectroscopy (FTIR) to analyze fine-particulate emissions collected on Teflon membrane filters from 15 cookstove types and 5 fuel types. Emissions from three fuel types (charcoal, kerosene, and red oak wood) were found to have enough FTIR spectral response for functional group (FG) analysis. We present distinct spectral profiles for particulate emissions of these three fuel types. We highlight the influential FGs constituting organic carbon (OC) using a multivariate statistical method and show that OC estimates by collocated FTIR and thermal-optical transmittance (TOT) are highly correlated, with a coefficient determination of 82.5 %. As FTIR analysis is fast and non-destructive and provides complementary FG information, the analysis method demonstrated herein can substantially reduce the need for thermal-optical measurements for source emissions.

The Combined Utilization of Epithelial Thickness Mapping and Tomography in Keratorefractive Surgery Screening: One Imaging Modality is Not Sufficient.

Increasing popularity and utility of epithelial thickness mapping (ETM) in keratorefractive surgery screening may begin to inappropriately devalue the use of tomography. An increasing body of research suggests that the interpretation of ETM based solely on the corneal resurfacing function may be insufficient to screen and select patients for refractive surgery. ETM and tomography are complementary and, when used together, may provide the safest and most optimal tools for keratorefractive surgery screening.

Magmatic immiscibility and the origin of magnetite-(apatite) iron deposits.

The origin of magnetite-(apatite) iron deposits (MtAp) is one of the most contentious issues in ore geology with competing models that range from hydrothermal to magmatic processes. Here we report melt inclusions trapped in plagioclase phenocrysts in andesite hosting the MtAp mineralization at El Laco, Chile. The results of our study reveal that individual melt inclusions preserve evidence of complex processes involved in melt immiscibility, including separation of Si- and Fe-rich melts, the latter hosting Cu sulfide-rich, phosphate-rich, and residual C-O-HFSE-rich melts, with their melting temperature at 1145 °C. This association is consistent with the assemblages observed in the ore, and provides a link between silicate and Fe-P-rich melts that subsequently produced the magnetite-rich magmas that extruded on the flanks of the volcano. These results strongly suggest that the El Laco mineralization was derived from crystallization of Fe-P-rich melts, thus providing insight into the formation of similar deposits elsewhere.

A flexible proton beam imaging energy spectrometer (PROBIES) for high repetition rate or single-shot high energy density (HED) experiments (invited).

The PROBIES diagnostic is a new, highly flexible, imaging and energy spectrometer designed for laser-accelerated protons. The diagnostic can detect low-mode spatial variations in the proton beam profile while resolving multiple energies on a single detector or more. When a radiochromic film stack is employed for "single-shot mode," the energy resolution of the stack can be greatly increased while reducing the need for large numbers of films; for example, a recently deployed version allowed for 180 unique energy measurements spanning ∼3 to 75 MeV with <0.4 MeV resolution using just 20 films vs 180 for a comparable traditional film and filter stack. When utilized with a scintillator, the diagnostic can be run in high-rep-rate (>Hz rate) mode to recover nine proton energy bins. We also demonstrate a deep learning-based method to analyze data from synthetic PROBIES images with greater than 95% accuracy on sub-millisecond timescales and retrained with experimental data to analyze real-world images on sub-millisecond time-scales with comparable accuracy.

Remodelling of vascular (surgical) services in the UK.

The last few years have seen major changes in the delivery of vascular services in the UK. An increasingly elderly population with greater expectations from their medical services has challenged established methods. It also became apparent that outcomes for low volume, high risk index vascular interventions such as abdominal aortic aneurysm repair were poor in the UK compared to the rest of Europe. Other ongoing challenges were the introduction of a national aortic aneurysm screening programme and the development of vascular surgery as a separate speciality. This article details the approach taken to modernise vascular services in the UK, using a quality framework agreed by vascular specialists, which drove the structural change to move vascular interventions into fewer, higher volume centres. The introduction of modern networks is designed to maintain services in surrounding hospitals without on site vascular inpatient services. The initial effects of this service remodelling are positive, with elective aortic aneurysm mortality rates falling nationally from 7.5 to 2.4 per cent.