Molecular Dynamics Investigation of Metastable Structure and Hybridization Bond Evolution in High-Entropy CoCrFeNi Heterostructured Amorphous Carbon Films.

Heterogeneous element doping in amorphous carbon films can reduce residual stresses and improve plastic deformation. Nevertheless, the effects of dopant content and size on the metastable transition mechanism between sp2-C and sp3-C atoms during the deformation process are unclear and difficult to be in situ observed and researched, experimentally. In this work, the mechanical properties and the structural evolution during the nanoindentation of amorphous CoCrFeNi sphere-doped carbon heterostructured films with different radii were simulated. The results indicate that the hardness H and elastic modulus E of the films decreased with the increase of the dopant addition. H decreases from 50.69 to 28.94 GPa, and E decreases from 664.39 to 448.62 GPa. The decrease in the elastic recovery and the enlargement of the shear transition zones indicate that the presence of the amorphous CoCrFeNi dopant can significantly improve the plastic deformation capacity of the films. During the nanoindentation process, the spherical dopants reduce the stress and shear strain of the regions under the indenter in a-C films. The reduction of compressive and shear stresses in the film can inhibit the C atom metastable transition from sp2-C to sp3-C. This can provide a theoretical basis for the development and design of heavy-load and high-deformation-rate a-C films.

Crucial role of SWL1 in chloroplast biogenesis and development in Arabidopsis thaliana.

KEY MESSAGE: The disruption of the SWL1 gene leads to a significant down regulation of chloroplast and secondary metabolites gene expression in Arabidopsis thaliana. And finally results in a dysfunction of chloroplast and plant growth. Although the development of the chloroplast has been a consistent focus of research, the corresponding regulatory mechanisms remain unidentified. In this study, the CRISPR/Cas9 system was used to mutate the SWL1 gene, resulting in albino cotyledons and variegated true leaf phenotype. Confocal microscopy and western blot of chloroplast protein fractions revealed that SWL1 localized in the chloroplast stroma. Electron microscopy indicated chloroplasts in the cotyledons of swl1 lack well-defined grana and internal membrane structures, and similar structures have been detected in the albino region of variegated true leaves. Transcriptome analysis revealed that down regulation of chloroplast and nuclear gene expression related to chloroplast, including light harvesting complexes, porphyrin, chlorophyll metabolism and carbon metabolism in the swl1 compared to wild-type plant. In addition, proteomic analysis combined with western blot analysis, showed that a significant decrease in chloroplast proteins of swl1. Furthermore, the expression of genes associated with secondary metabolites and growth hormones was also reduced, which may be attributed to SWL1 associated with absorption and fixation of inorganic carbon during chloroplast development. Together, the above findings provide valuable information to elucidate the exact function of SWL1 in chloroplast biogenesis and development.

Performance of machine learning-based coronary computed tomography angiography for selecting revascularization candidates.

BACKGROUND: Limited studies have investigated the accuracy of therapeutic decision-making using machine learning-based coronary computed tomography angiography (ML-CCTA) compared with CCTA. PURPOSE: To investigate the performance of ML-CCTA for therapeutic decision compared with CCTA. MATERIAL AND METHODS: The study population consisted of 322 consecutive patients with stable coronary artery disease. The SYNTAX score was calculated with an online calculator based on ML-CCTA results. Therapeutic decision-making was determined by ML-CCTA results and the ML-CCTA-based SYNTAX score. The therapeutic strategy and the appropriate revascularization procedure were selected using ML-CCTA, CCTA, and invasive coronary angiography (ICA) independently. RESULTS: The sensitivity, specificity, positive predictive value, negative predictive value, accuracy of ML-CCTA and CCTA for selecting revascularization candidates were 87.01%, 96.43%, 95.71%, 89.01%, 91.93%, and 85.71%, 87.50%, 86.27%, 86.98%, 86.65%, respectively, using ICA as the standard reference. The area under the receiver operating characteristic curve (AUC) of ML-CCTA for selecting revascularization candidates was significantly higher than CCTA (0.917 vs. 0.866, P = 0.016). Subgroup analysis showed the AUC of ML-CCTA for selecting percutaneous coronary intervention (PCI) or coronary artery bypass graft (CABG) candidates was significantly higher than CCTA (0.883 vs. 0.777, P < 0.001, 0.912 vs. 0.826, P = 0.003, respectively). CONCLUSION: ML-CCTA could distinguish between patients who need revascularization and those who do not. In addition, ML-CCTA showed a slightly superior to CCTA in making an appropriate decision for patients and selecting a suitable revascularization strategy.

ALKBH5-YTHDF2 m6A modification axis inhibits rheumatoid arthritis progression by suppressing NLRP3.

Rheumatoid arthritis (RA) is a chronic inflammatory autoimmune disease. Recently, NLRP3 has been demonstrated to be closely related to RA. The objective of our research was to analyze the specific mechanism of NLRP3 in RA. The m6A levels of NLRP3 was detected with methylated RNA immunoprecipitation (MeRIP) kit. The mRNA and protein levels of related genes were tested with RT-qPCR and Western blot. The inflammatory factors levels were detected with ELISA kits. The cell proliferative ability was measured with CCK-8 and EdU staining assays. NLRP3 levels was prominently in synovial tissues and fibroblast-like synoviocytes (FLS) from RA patients. NLRP3 silencing suppressed FLS proliferation and inflammatory factor levels. Additionally, ALKBH5 was found to bind with NLRP3, and ALKBH5 silencing suppressed FLS proliferation and inflammatory factor levels while NLRP3 overexpressing neutralized the role of ALKBH5 in FLS. Furthermore, m6A modified induced by ALKBH5 suppressed NLRP3 mRNA level through YTHDC2 in RA, and NLRP3 is a hinge factor in RA progression.

Origin of Deformation Twinning in bcc Tungsten and Molybdenum.

Twinning is profuse in bcc transition metals (TMs) except bulk W and Mo. However, W and Mo nanocrystals surprisingly exhibit twinning during room temperature compression, which is completely unexpected as established nucleation mechanisms are not viable in them. Here, we reveal the physical origin of deformation twinning in W and Mo. We employ density functional theory (DFT) and a reduced-constraint slip method to compute the stress-dependent generalized stacking fault enthalpy (GSFH), the thermodynamic quantity to be minimized under constant loading. The simple slipped structures and GSFH lines show that compressive stresses stabilize a two-layer twin embryo, which can grow rapidly via twinning disconnections with negligible energy barriers. Direct atomistic simulations unveil the explicit twinning path in agreement with the DFT GSFH lines. Twinning is thus the preferred deformation mechanism in W and Mo when shear stresses are coupled with high compressive stresses. Furthermore, twinnability can be related to the elastic constants of a stacking fault phase (SFP). The hcp phase may serve as a candidate SFP for the {112}⟨1[over ¯]1[over ¯]1⟩ twinning system in bcc TMs and alloys, which is coincident with the {111}⟨112[over ¯]⟩ twinning in fcc structures.

Prognostic value of CAD-RADS classification by coronary CTA in patients with suspected CAD.

BACKGROUND: The study sought to compare Coronary Artery Disease Reporting and Data System (CAD-RADS) classification with traditional coronary artery disease (CAD) classifications and Duke Prognostic CAD Index for predicting the risk of all-cause mortality in patients with suspected CAD. METHODS: 9625 consecutive suspected CAD patients were assessed by coronary CTA for CAD-RADS classification, traditional CAD classifications and Duke Prognostic CAD Index. Kaplan-Meier and multivariable Cox models were used to estimate all-cause mortality. Discriminatory ability of classifications was assessed using time dependent receiver-operating characteristic (ROC) curves and The Hosmer-Lemeshow goodness-of-fit test was employed to evaluate calibration. RESULTS: A total of 540 patients died from all causes with a median follow-up of 4.3 ± 2.1 years. Kaplan-Meier survival curves showed the cumulative events increased significantly associated with CAD-RADS, three traditional CAD classifications and Duke Prognostic CAD Index. In multivariate Cox regressions, the risk for the all-cause death increased from HR 0.861 (95% CI 0.420-1.764) for CAD-RADS 1 to HR 2.761 (95% CI 1.961-3.887) for CAD-RADS 4B&5, using CAD-RADS 0 as the reference group. The relative HRs for all-cause death increased proportionally with the grades of the three traditional CAD classifications and Duke Prognostic CAD Index. The area under the time dependent ROC curve for prediction of all-cause death was 0.7917, 0.7805, 0.7991for CAD-RADS in 1 year, 3 year, 5 year, respectively, which was non-inferior to the traditional CAD classifications and Duke Prognostic CAD Index. CONCLUSIONS: The CAD-RADS classification provided important prognostic information for patients with suspected CAD with noninvasive evaluation, which was non-inferior than Duke Prognostic CAD Index and traditional stenosis-based grading schemes in prognostic value of all-cause mortality. Traditional and simplest CAD classification should be preferable, given the more number of groups and complexity of CAD-RADS and Duke prognostic index, without using more time consuming classification.

A PPR Protein ACM1 Is Involved in Chloroplast Gene Expression and Early Plastid Development in Arabidopsis.

Chloroplasts cannot develop normally without the coordinated action of various proteins and signaling connections between the nucleus and the chloroplast genome. Many questions regarding these processes remain unanswered. Here, we report a novel P-type pentatricopeptide repeat (PPR) factor, named Albino Cotyledon Mutant1 (ACM1), which is encoded by a nuclear gene and involved in chloroplast development. Knock-down of ACM1 transgenic plants displayed albino cotyledons but normal true leaves, while knock-out of the ACM1 gene in seedlings was lethal. Fluorescent protein analysis showed that ACM1 was specifically localized within chloroplasts. PEP-dependent plastid transcript levels and splicing efficiency of several group II introns were seriously affected in cotyledons in the RNAi line. Furthermore, denaturing gel electrophoresis and Western blot experiments showed that the accumulation of chloroplast ribosomes was probably damaged. Collectively, our results indicate ACM1 is indispensable in early chloroplast development in Arabidopsis cotyledons.

Ultimate Strength of Nanotwinned Face-Centered Cubic Metals.

In this work, we present a theoretical model to predict the ultimate strength of nanotwinned face-centered cubic (fcc) metals based on the activation energy for phase transformation (i.e., between the matrix and the twinned counterpart) mediated by the migration of {112}-type step on Σ3(111) twin boundaries. By integrating the Hall-Petch strengthening and grain boundary sliding into this model, we can accurately predict the strength of four representative nanotwinned (nt) fcc metals (nt-Cu, nt-Ag, nt-Ni, and nt-Al) within a broad range of grain sizes including the so-called nanocrystalline-nanotwinned regime. This framework is built on material parameters which directly connect the theoretical calculations with experimental measurements and reveals new insights into the design of ultrastrong metals and alloys.

Maximum chest CT score is associated with progression to severe illness in patients with COVID-19: a retrospective study from Wuhan, China.

BACKGROUND: The Coronavirus Disease 2019 (COVID-19) pandemic is a world-wide health crisis. Limited information is available regarding which patients will experience more severe disease symptoms. We evaluated hospitalized patients who were initially diagnosed with moderate COVID-19 for clinical parameters and radiological feature that showed an association with progression to severe/critical symptoms. METHODS: This study, a retrospective single-center study at the Central Hospital of Wuhan, enrolled 243 patients with confirmed COVID-19 pneumonia. Forty of these patients progressed from moderate to severe/critical symptoms during follow up. Demographic, clinical, laboratory, and radiological data were extracted from electronic medical records and compared between moderate- and severe/critical-type symptoms. Univariable and multivariable logistic regressions were used to identify the risk factors associated with symptom progression. RESULTS: Patients with severe/critical symptoms were older (p < 0.001) and more often male (p = 0.046). A combination of chronic obstructive pulmonary disease (COPD) and high maximum chest computed tomography (CT) score was associated with disease progression. Maximum CT score (> 11) had the greatest predictive value for disease progression. The area under the receiver operating characteristic curve was 0.861 (95% confidence interval: 0.811-0.902). CONCLUSIONS: Maximum CT score and COPD were associated with patient deterioration. Maximum CT score (> 11) was associated with severe illness.

Membrane microdomains and the cytoskeleton constrain AtHIR1 dynamics and facilitate the formation of an AtHIR1-associated immune complex.

Arabidopsis hypersensitive-induced reaction (AtHIR) proteins function in plant innate immunity. However, the underlying mechanisms by which AtHIRs participate in plant immunity remain elusive. Here, using VA-TIRFM and FLIM-FRET, we revealed that AtHIR1 is present in membrane microdomains and co-localizes with the membrane microdomain marker REM1.3. Single-particle tracking analysis revealed that membrane microdomains and the cytoskeleton, especially microtubules, restrict the lateral mobility of AtHIR1 at the plasma membrane and facilitate its oligomerization. Furthermore, protein proximity index measurements, fluorescence cross-correlation spectroscopy, and biochemical experiments demonstrated that the formation of the AtHIR1 complex upon pathogen perception requires intact microdomains and cytoskeleton. Taken together, these findings suggest that microdomains and the cytoskeleton constrain AtHIR1 dynamics, promote AtHIR1 oligomerization, and increase the efficiency of the interactions of AtHIR1 with components of the AtHIR1 complex in response to pathogens, thus providing valuable insight into the mechanisms of defense-related responses in plants.

Engineering Bulk, Layered, Multicomponent Nanostructures with High Energy Density.

The precise control of individual components in multicomponent nanostructures is crucial to realizing their fascinating functionalities for applications in electronics, energy-conversion devices, and biotechnologies. However, this control remains particularly challenging for bulk, multicomponent nanomaterials because the desired structures of the constitute components often conflict. Herein, a strategy is reported for simultaneously controlling the structural properties of the constituent components in bulk multicomponent nanostructures through layered structural design. The power of this approach is illustrated by generating the desired structures of each constituent in a bulk multicomponent nanomaterial (SmCo + FeCo)/NdFeB, which cannot be attained with existing methods. The resulting nanostructure exhibits a record high energy density (31 MGOe) for this class of bulk nanocomposites composed of both hard and soft magnetic materials, with the soft magnetic fraction exceeding 20 wt%. It is anticipated that other properties beyond magnetism, such as the thermoelectric and mechanical properties, can also be tuned by engineering such layered architectures.

Controllably Manipulating Three-Dimensional Hybrid Nanostructures for Bulk Nanocomposites with Large Energy Products.

Hybrid nanostructures that comprise two or more nanoscale functional components are fascinating for applications in electronics, energy conversion devices, and biotechnologies. Their performances are strongly dependent on the characteristics of the individual components including the size, morphology, orientation, and distribution. However, it remains challenging to simultaneously control these structural properties in a three-dimensional (3D) hybrid nanostructure. Here, we introduce a robust strategy for concurrently manipulating these characteristics in a bulk SmCo/Fe(Co) nanocomposite. This method can tune nanocrystals in size (down to sub-10 nm), morphology (sphere, rod, or disc), and crystallographic orientation (isotropic or anisotropic). We have therefore achieved the desired nanostructures: oriented hard magnetic SmCo grains and homogeneously distributed soft magnetic Fe(Co) grains with high fractions (∼26 wt %) and small sizes (∼12.5 nm). The resulting anisotropic nanocomposite exhibits an energy product that is approximately 50% greater than that of its corresponding pure SmCo magnet and 35% higher than the reported largest value in isotropic SmCo/Fe(Co) systems. Our findings pave a new way to manipulating 3D hybrid nanostructures in a controllable manner.

The Pentratricopeptide Repeat Protein Pigment-Defective Mutant2 is Involved in the Regulation of Chloroplast Development and Chloroplast Gene Expression in Arabidopsis.

The development of functional chloroplasts, which is assisted by a series of nuclear-encoded auxiliary protein factors, is essential for plant autotrophic growth and development. To understand the molecular mechanisms underlying chloroplast development, we isolated and characterized a pigment-defective mutant, pdm2, and its corresponding variegated RNA interference (RNAi) lines in Arabidopsis. Sequence analysis revealed that PDM2 encodes a pentatricopeptide repeat protein that belongs to the P subgroup. Confocal microscopic analysis and immunoblotting of the chloroplast protein fraction showed that PDM2 was located in the stroma. In RNAi plants, protein-related photosynthesis was severely compromised. Furthermore, analysis of the transcript profile of chloroplast genes revealed that plastid-encoded polymerase-dependent transcript levels were markedly reduced, while nuclear-encoded polymerase-dependent transcript levels were increased, in RNAi plants. In addition, PDM2 affects plastid RNA editing efficiency in most editing sites, apparently by directly interacting with multiple organellar RNA editing factor 2 (MORF2) and MORF9. Thus, our results demonstrate that PDM2 is probably involved in the regulation of plastid gene expression required for normal chloroplast development.

Development of the photosynthetic apparatus of Cunninghamia lanceolata in light and darkness.

Here, we compared the development of dark- and light-grown Chinese fir (Cunninghamia lanceolata) cotyledons, which synthesize chlorophyll in the dark, representing a different phenomenon from angiosperm model plants. We determined that the grana lamellar membranes were well developed in both chloroplasts and etiochloroplasts. The accumulation of thylakoid membrane protein complexes was similar between chloroplasts and etiochloroplasts. Measurement of chlorophyll fluorescence parameters indicated that photosystem II (PSII) had low photosynthetic activities, whereas the photosystem I (PSI)-driven cyclic electron flow (CEF) rate exceeded the rate of PSII-mediated photon harvesting in etiochloroplasts. Analysis of the protein contents in etiochloroplasts indicated that the light-harvesting complex II remained mostly in its monomeric conformation. The ferredoxin NADP+ oxidoreductase and NADH dehydrogenase-like complexes were relatively abundantly expressed in etiochloroplasts for Chinese fir. Our transcriptome analysis contributes a global expression database for Chinese fir cotyledons, providing background information on the regulatory mechanisms of different genes involved in the development of dark- and light-grown cotyledons. In conclusion, we provide a novel description of the early developmental status of the light-dependent and light-independent photosynthetic apparatuses in gymnosperms.

PDM3, a pentatricopeptide repeat-containing protein, affects chloroplast development.

The chloroplast, as the photosynthetic organelle of plants, plays a crucial role in plant development. Extensive studies have been conducted on chloroplast development; however, the related regulatory mechanism still remains elusive. Here, we characterized a mutant with defective chloroplasts in Arabidopsis, termed pigment-defective mutant3 (pdm3), which exhibits a distinct albino phenotype in leaves, eventually leading to pdm3 seedling lethality under autotrophic growth conditions. Electron microscopy demonstrated that the number of thylakoids was reduced and the structure of those thylakoids was disrupted in the pdm3 mutant, which eventually led to the breakdown of chloroplasts. Sequence analysis showed that PDM3 encodes a chloroplast protein consisting of 12 pentratricopeptide repeat domains that belongs to the P subgroup. Both confocal microscopic analysis and immunoblotting in the chloroplast protein fraction showed that PDM3 was located in the stroma. Furthermore, analysis of the transcript profiles of chloroplast genes revealed that plastid-encoded polymerase-dependent transcript levels were markedly reduced, while nuclear-encoded polymerase-dependent transcript levels were increased in pdm3 mutants. In addition, we found that the splicing of introns in trnA, ndhB, and clpP-1 is also affected in pdm3. Taken together, we propose that PDM3 plays an essential role in chloroplast development in Arabidopsis.

Mechanical and thermal properties of γ-Mg2SiO4 under high temperature and high pressure conditions such as in mantle: A first principles study.

γ-Mg2SiO4 is an important mineral in mantle, and our knowledge on its mechanical and thermal properties is critical for many areas of geological sciences. In this work, the crystal structure of γ-Mg2SiO4 under high temperature and high pressure conditions is optimized by using the GOMASC method, and the total energy, thermal expansion coefficients, and elastic constants at different temperature and pressure conditions are obtained. On the basis of phonon spectrum, group velocity, phase velocity, Grüneisen parameter, and thermal conductivity are calculated for γ-Mg2SiO4 under high temperature and high pressure conditions. These calculated results can provide an important reference for geological research.

Phase transformation of cadmium sulfide under high temperature and high pressure conditions.

Cadmium sulfide (CdS) is one of the most significant wide band gap semiconductors, and knowledge of the phase transformation of CdS under high temperature and pressure is especially important for its applications. The pressure-temperature phase diagram and the phase transformation pathways of CdS have been investigated by using density functional theory combined with quasiharmonic approximation. Our results indicated that under ambient conditions, wz-CdS is a stable phase, while under high temperature and pressure, rs-CdS becomes the stable phase. It is also found that zb-CdS is an intermediate phase in transforming from rs-CdS to wz-CdS. Therefore, although there are no zb-CdS phase regions in the CdS pressure-temperature phase diagram, zb-CdS can be found in some prepared experiments.

Phase stability limit of c-BN under hydrostatic and non-hydrostatic pressure conditions.

Phase stability limit of cubic boron nitride (c-BN) has been investigated by the crystal structure search technique. It indicated that this limit is ∼1000 GPa at hydrostatic pressure condition. Above this pressure, c-BN turns into a metastable phase with respect to rocksalt type boron nitride (rs-BN). However, rs-BN cannot be retained at 0 GPa owing to its instability at pressure below 250 GPa. For non-hydrostatic pressure conditions, the phase stability limit of c-BN is substantially lower than that under hydrostatic pressure conditions and it is also dramatically different for other pressure mode.

Lack of incremental prognostic value of triglyceride glucose index beyond coronary computed tomography angiography features for major events.

This study was aim to determine the prognostic value of triglyceride-glucose (TyG) index and coronary computed tomography angiography (CTA) features for major adverse cardiovascular events (MACE). In addition, we investigate the incremental prognostic value of TyG index beyond coronary CTA features in patients with suspected or known coronary artery disease (CAD). The present study ultimately includes 3528 patients who met the enrollment criteria. The TyG index was calculated based on measured levels of triglycerides and fasting blood glucose. Primary combined endpoint consisted of MACE, which defined as myocardial infraction (MI), all-cause mortality and stroke. Three multivariate Cox proportional hazard regression models were performed to assess the association between TyG index and MACE. C-statistic was performed to assess the discriminatory value of models. 212 (6.0%) patients developed MACE during a median follow-up of 50.4 months (IQR, 39.4-55.1). TyG index remained to be a significantly and independent risk factors for predicting MACE after adjusting by different models (clinical variables alone or plus coronary CTA features) in multivariable analysis. Both the addition of TyG index to clinical model plus Coronary Artery Disease Reporting and Data System (CAD-RADS) and to clinical model plus CAD-RADS 2.0 slightly but not significantly increased the C-statistic index (0.725 vs. 0.721, p = 0.223; 0.733 vs. 0.731, p = 0.505). TyG index was associated with an increased risk of MACE. However, no incremental prognostic benefit of TyG index over CAD-RADS or CAD-RADS 2.0 was detected for MACE in patients with suspected or known CAD.

Association of the triglyceride glucose index with myocardial ischemia in patients with minimal to moderate coronary artery disease.

The triglyceride glucose (TyG) index has been suggested as a reliable substitute to indicate insulin resistance. Several studies have identified the association between the TyG index and cardiovascular disease. However, the association between the TyG index and the incidence of myocardial ischemia in patients with minimal to moderate coronary artery disease (CAD) has not been clearly assessed. We aimed to investigate the association between the TyG index and the incidence of myocardial ischemia in patients with minimal to moderate CAD. A total of 1,697 patients who underwent coronary computed tomography angiography (CTA) examinations and had minimal to moderate CAD were retrospectively included in the study. The TyG index and computed tomography-derived fractional flow reserve (CT-FFR) were used to assess insulin resistance (IR) and myocardial ischemia, respectively. Myocardial ischemia was defined as a CT-FFR value ≤ 0.80. Logistic regression models were used to explore the associations between the TyG index and myocardial ischemia. The incidence of myocardial ischemia was higher in the highest TyG index tertile (T3) group than in the lowest TyG index tertile (T1) group. After adjusting for other variables, the T3 group remained associated with a higher risk of myocardial ischemia than the T1 group did (OR, 1.43; 95% CI, 1.01-2.04; p = 0.047). A 1- standard deviation (SD) increase in the TyG index was correlated with a 19-24% elevated risk of myocardial ischemia when regarding the TyG index was considered as a continuous variable. Subgroup analysis revealed similar effects. A TyG index is associated with a higher risk of myocardial ischemia detected by CT-FFR in patients with minimal to moderate CAD.