Realization of multifunctional transformation based on the vanadium dioxide-assisted metamaterial structure.

In this paper, a multifunctional device and a design method are proposed based on the vanadium dioxide (VO2)-assisted metamaterial structure. The structure comprises several layers arranged from top to bottom, including a VO2 patch layer, a polyimide (PI) dielectric layer, an elliptical metal layer, a VO2 thin film layer, another PI dielectric layer, and a bottom metal layer. The research results show that the metamaterial structure enables linear-to-linear (LTL) polarization conversion and linear-to-circular (LTC) polarization conversion across multiple frequency bands when the VO2 is in the insulating state. Moreover, as the VO2 material undergoes a transition from the insulating state to the metallic state, the multifunctional structure can function as a broadband absorber, exhibiting an absorption rate of over 90% within the frequency range of 1.751-3.853 THz, with a relative bandwidth of 75%. This versatile conversion device holds great potential for applications in terahertz system and smart system fields.

Highly boosted trace-amount terahertz vibrational absorption spectroscopy based on defect one-dimensional photonic crystal.

Although terahertz (THz) spectroscopy demonstrates great application prospects in the fields of fingerprint sensing and detection, traditional sensing schemes face unavoidable limitations in the analysis of trace-amount samples. In this Letter, a novel, to the best of our knowledge, absorption spectroscopy enhancement strategy based on a defect one-dimensional photonic crystal (1D-PC) structure is proposed to achieve strong wideband terahertz wave-matter interactions for trace-amount samples. Based on the Fabry-Pérot resonance effect, the local electric field in a thin-film sample can be boosted by changing the length of the photonic crystal defect cavity, so that the wideband signal of the sample fingerprint can be greatly enhanced. This method exhibits a great absorption enhancement factor, of about 55 times, in a wide terahertz frequency range, facilitating the identification of different samples, such as thin α-lactose films. The investigation reported in this Letter provides a new research idea for enhancing the wide terahertz absorption spectroscopy of trace samples.

Boosting of the terahertz absorption spectrum based on one-dimensional plastic photonic crystals.

Although terahertz (THz) spectroscopy exhibits a broad application potential in the field of fingerprint sensing and detection, there remain some limitations with the conventional sensing methods for analyzing trace analytes. In this study, a terahertz absorption spectrum boosting method based on the defect one-dimensional (1D) plastic photonic crystal (PPC) structure is proposed to improve the interaction between the terahertz wave and the trace samples. Affected by the Fabry Perot resonance, the local electric field in thin film analytes will be improved. Furthermore, the resonant frequency will be varied by changing the defect width of the 1D PPC. The structure of the uniform planar film sample is easily built and measured. The boosted terahertz absorption spectrum can be obtained by linking the resonant absorption peaks. For the 0.2 µm α-lactose films, a large absorption enhancement factor of about 105 times can be achieved, which has great potential in identifying different analytes. The study performed here gives a novel investigation direction for boosting the broad terahertz absorption spectrum of trace amounts of analytes.

Enhancement of wide-band trace terahertz absorption spectroscopy based on microstructures: a review.

Research on the interaction between nanoscale materials and light holds significant scientific significance for the development of fields such as optoelectronic conversion and biosensing. The study of micro- and nano-optics has produced numerous outstanding research achievements by utilizing the dielectric optical coupling mechanism and plasmon effects to enhance the interaction between light and matter. These findings have demonstrated tremendous potential for applications in the field of molecular fingerprint sensing. This review focuses on a retrospective analysis of recent research studies in the enhancement of wide-band trace terahertz absorption spectroscopy. The physical mechanisms of using waveguide structures, dielectric metasurfaces/meta-gratings, and spoof surface plasmon polaritons (SSPs) to improve the interaction between light and trace-amount matters are introduced. The new approaches and methods for enhancing broad-band terahertz absorption spectroscopy of trace samples using microstructure designs are discussed. Additionally, we elucidate the scientific ideas and exploratory achievements in enhancing terahertz fingerprint spectroscopy detection. Finally, we provide an outlook on the research and development direction and potential practical applications of absorption spectroscopy enhancement detection.

Dynamic adjustable metalens based on a stretchable substrate with a double-layer metal microstructure.

Based on the impedance-matching theory, a double-layer metal structure dynamical focusing cylindrical metalens with a stretchable substrate was designed at the operation frequency of 0.1 THz. The diameter, initial focal length, and NA of the metalens were 80 mm, 40 mm, and 0.7, respectively. The transmission phase of the unit cell structures could cover 0-2π by changing the size of the metal bars, and then the different unit cells were spatially arranged as the designed phase profile for the metalens. When the stretching range of the substrate was about 100%-140%, the focal length changed from 39.3 mm to 85.5 mm, the dynamic focusing range was about 117.6% of the minimum focal length, and the focusing efficiency decreases from 49.2% to 27.9%. Then, by rearranging the unit cell structures, a dynamically adjustable bifocal metalens was numerically realized. Using the same stretching ratio, compared to a single focus metalens, the bifocal metalens can provide a larger focal length control range.

Enhancing THz fingerprint detection by the stretchable substrate with a dielectric metagrating.

The terahertz (THz) wave contains abundant spectrum resources and is still in the early stages of development. It has great application potential in biomedical engineering and public security. However, in these areas there are difficulties to overcome like measuring the wide band absorption of a trace mount sample. In this paper, a THz absorption enhancing method is suggested by a multiplexing strategy. By gradually expanding the stretchable substrate of the dielectric metagrating with an oblique THz wave incidence, the resonance peak frequencies can cover the frequency range of 0.48-0.58 THz. Also, the corresponding envelope built by the peaks of the metagrating absorption spectrum with the 0.2 µm α-lactose film can demonstrate 71.55 times boosting compared to the original absorption amplitude of the film. The investigation witnesses possibilities for the detection of biomacromolecular materials.

Vanadium dioxide-assisted switchable multifunctional metamaterial structure.

A multifunctional design based on vanadium dioxide (VO2) metamaterial structure is proposed. Broadband absorption, linear-to-linear (LTL) polarization conversion, linear-to-circular (LTC) polarization conversion, and total reflection can be achieved based on the insulator-to-metal transition (IMT) of VO2. When the VO2 is in the metallic state, the multifunctional structure can be used as a broadband absorber. The results show that the absorption rate exceeds 90% in the frequency band of 2.17 - 4.94 THz, and the bandwidth ratio is 77.8%. When VO2 is in the insulator state, for the incident terahertz waves with a polarization angle of 45°, the structure works as a polarization converter. In this case, LTC polarization conversion can be obtained in the frequency band of 0.1 - 3.5 THz, and LTL polarization conversion also can be obtained in the frequency band of 3.5 - 6 THz, especially in the 3.755 - 4.856 THz band that the polarization conversion rate is over 90%. For the incident terahertz waves with a polarization angle of 0°, the metamaterial structure can be used as a total reflector. Additionally, impacts of geometrical parameters, incidence angle and polarization angle on the operating characteristics have also been investigated. The designed switchable multifunctional metasurfaces are promising for a wide range of applications in advanced terahertz research and smart applications.

Enhanced trace-amount terahertz vibrational absorption spectroscopy using surface spoof polarization in metasurface structures.

Terahertz (THz) absorption spectroscopy is a powerful tool for molecular label-free fingerprinting, but it faces a formidable hurdle in enhancing the broadband spectral signals in trace-amount analysis. In this paper, we propose a sensing method based on the geometry scanning of metal metasurfaces with spoof surface polarization sharp resonances by numerical simulation. This scheme shows a significant absorption enhancement factor of about 200 times in an ultra-wide terahertz band to enable the explicit identification of various analytes, such as a trace-amount thin lactose film samples. The proposed method provides a new, to the best of our knowledge, choice for the enhancement of wide terahertz absorption spectra, and paves the way for the detection of trace-amount chemical, organic, or biomedical materials in the terahertz regime.

Boosting the terahertz absorption spectroscopy based on the stretchable metasurface.

Terahertz (THz) absorption spectroscopy is widely used for molecular label-free fingerprinting detection, but it is not capable of efficiently analyzing trace-amount sample materials. For improving the efficiency of terahertz absorptance spectroscopy detection, we propose a sensing strategy by treating the geometry sweeping spoof surface plasmon polariton (SSP) of the stretchable metasurface. For the first time, the geometry sweeping can be realized by dynamically stretching the polydimethylsiloxane (PDMS) flexible substrate, leading to the resonant frequency variation of the unit cell. This design provides a significant absorption enhancement factor about 270 times for a 0.1 µm lactose film in a broad terahertz band, enabling the unambiguous identification of different trace-amount samples. The designed method exhibits a novel solution for the enhancement of broad-band terahertz absorption spectroscopy and great application potential in the field of detecting trace-amount samples.

Realization of absorption, filtering, and sensing in a single metamaterial structure combined with functional materials.

In this paper, a hybrid vanadium dioxide (VO2)-graphene-based bifunctional metamaterial is proposed. The realization of the different functions of perfect transmission and high absorption is based on the insulator-metal phase transition of VO2 material. The Fermi energy level of graphene can be treated to dynamically tune the absorption and transmission rates of the metamaterial structure. As a result, when VO2 is in the insulating state, the designed metamaterial can be used as a filter providing three adjustable passbands with center frequencies of 1.892 THz, 1.124 THz, and 0.94 THz, and the corresponding transmittances reach 93.11%, 98.62%, and 90.01%, respectively. The filter also shows good stopband characteristics and exhibits good sensing performance at the resonant frequencies of 1.992 THz and 2.276 THz. When VO2 is in metal state, the metamaterial structure acts as a double-band absorber, with three absorption peaks (>90%) in the range of 0.684 THz to 0.924 THz, 2.86 THz to 3.04 THz, and 3.28 THz to 3.372 THz, respectively. The designed structure is insensitive to the polarization of vertically incident terahertz waves and still maintains good absorption performances over a large range of incidence angles. Finally, the effects of geometric parameters on the absorption and transmission properties of the hybrid bifunctional metamaterials have also been discussed. The switchable metamaterial structures proposed in this paper provide great potential in terahertz application fields, such as filtering, smart sensing, switching, tunable absorbers, and so on.

Polymer negative curvature ring-core fiber for OAM modes guidance.

In this paper, a novel, to the best of our knowledge, polymer-based negative curvature ring-core fiber (NC-RCF) is proposed and investigated. The hollow-core NC-RCF is composed of TOPAS as background material. The inner and outer negative curvature structure layers are connected to the annular area, and the orbital angular momentum (OAM) modes can propagate in the annular core. In the frequency region of 1.0-1.5 THz, the designed NC-RCF can stably transmit 82 OAM modes. Investigation results indicate that the effective refractive index differences between the corresponding HE and EH modes are above 10-4. The confinement losses of EH or HE modes are smaller than 10-8 d B/m, and the dispersion variations are lower than 0.31 ps/THz/cm. Effective mode areas are larger than 5.14m m 2. Additionally, the highest mode purity of all vector modes is 99.78%. In addition, modal birefringence, also known as the walk-off length, has also been discussed. All these operation performances indicate that the designed NC-RCF make contributions to the optical communication systems.

One-dimensional terahertz dielectric gradient metasurface for broadband spoof surface plasmon polaritons couplers: publisher's note.

This publisher's note contains corrections to Opt. Lett.46, 290 (2021)OPLEDP0146-959210.1364/OL.412229.

One-dimensional terahertz dielectric gradient metasurface for broadband spoof surface plasmon polaritons couplers.

At present, most of the gradient metasurfaces used to construct surface plasmon polaritons (SPPs)/spoof SPPs (SSPs) couplers are usually compact metal antennas working under reflection and transmission. In reflection mode, meta-couplers link propagating waves and surface waves (SWs), and SWs will undergo significant scattering before coupling to an Eigen SPP in the target system. In transmission mode, metal meta-couplers will encounter complex multilayer designing at the microwave/terahertz region and metal absorption loss at optical frequencies. In this Letter, to the best of our knowledge, a novel design using dielectric gradient metasurfaces instead of metal metasurface couplers is proposed to excite broadband SSPs on the metal groove array. We demonstrate that the well-designed phase dielectric gradient metasurface converts the normal incident terahertz wave to the predetermined angle in the dielectric substrate and then excites the broadband SSPs with the transmission coupling between the dielectric meta-coupler and SSPs surface. This research may open up new avenues in simple and broadband plane dielectric meta-couplers for SSPs in ultra-thin and compact functional devices for versatile applications.

Vanadium dioxide-assisted broadband absorption and linear-to-circular polarization conversion based on a single metasurface design for the terahertz wave.

Integrating tunable characteristics and multiple functions into a single metasurface has become a new scientific and technological undertaking that needs to deal with huge challenges, especially in the terahertz frequency region. The multifunctional design combining the broadband absorption and broadband polarization conversion using a single switchable metasurface is proposed in this paper. The switchable performance can be realized by treating the insulation to metal phase transition properties of vanadium dioxide (VO2). At high temperature (74 °C), the proposed metasurface can be used as a broadband absorber which consists of a VO2 square ring, polyimide (PI) spacer, and VO2 film. Simulated results show that the terahertz wave absorption can reach above 90% with the bandwidth ratio of 75% in the frequency range of 0.74 THz-1.62 THz. This absorber is insensitive to polarization resulted from the symmetry structure and also shows a good performance at large incident angles. Once the temperature is lower than the cooling phase transition temperature (about 62 °C) and VO2 is in insulation state, the metasurface can be transformed into a broadband linear-to-circular polarization converter. Numerical simulation depicts that the ellipticity reaches to -1 and the axis ratio is lower than 3 dB from 1.47 THz to 2.27 THz. The designed switchable metasurface provides the potential to be used in the fields of advanced research and intelligent applications in the terahertz frequency region.

Multi-direction bending sensor based on supermodes of multicore PCF laser.

A multi-direction bending sensor based on the 18-core photonic crystal fiber (PCF) is demonstrated in this paper. The design of the sensor is discussed theoretically and experimentally. The PCF serves as the laser gain medium and the sensing medium simultaneously in the fiber laser sensor. The operating wavelength of the proposed PCF laser sensor is about 1032.32 nm. A CMOS image capture system is used to acquire the distribution of supermodes in the PCF laser. Based on the normalized intensity distribution of supermodes, six directions can be measured. The sensor also shows the ability to measure bending radius within 0.11 m. Then, the thermal effects of the bending sensor have been analyzed and the sensing system shows a low temperature crosstalk.

Optimization for vertically scanning terahertz attenuated total reflection imaging.

Terahertz attenuated total reflection imaging has been used to develop preliminary applications without any in-depth analysis of the nature of present systems. Based on our proposed vertically scanning imaging system, an analysis of optimum prism design and polarization selection for error reduction is presented theoretically and experimentally, showing good agreement. By taking the secondary reflection inside the prism and the prism deflection into consideration, p-polarized terahertz waves are recommended for prisms with a base angle below 31°, leading to minimum error. This work will contribute to the development of more practical application of terahertz attenuated total reflection scanning imaging in various fields with enhanced performance.

High-power 266 nm laser generation with a NaSr3Be3B3O9F4 crystal.

We demonstrate a 266 nm ultraviolet (UV) picosecond laser by fourth-harmonic generation of a Nd:YAG laser with a 5.4 mm thick NaSr3Be3B3O9F4 (NSBBF) crystal. A maximum output power exceeding 1 W at 266 nm was obtained (the highest output power being 1.6 W), corresponding to a conversion efficiency of 10.3%. The stability measurements on the NSBBF crystal with a fluctuation of 3.34% at 200 mW within 1 h indicate that it is a promising UV nonlinear optical material for practical applications. In addition, for the first time, to the best of our knowledge, we measured the effective nonlinear coefficient of NSBBF crystal at 266 nm and compared it with that of ß-BaB2O4 crystal.

Energy scaling and extended tunability of terahertz wave parametric oscillator with MgO-doped near-stoichiometric LiNbO3 crystal.

A widely tunable, high-energy terahertz wave parametric oscillator based on 1 mol. % MgO-doped near-stoichiometric LiNbO3 crystal has been demonstrated with 1064 nm nanosecond pulsed laser pumping. The tunable range of 1.16 to 4.64 THz was achieved. The maximum THz wave output energy of 17.49 µJ was obtained at 1.88 THz under the pump energy of 165 mJ/pulse, corresponding to the THz wave conversion efficiency of 1.06 × 10-4 and the photon conversion efficiency of 1.59%, respectively. Moreover, under the same experimental conditions, the THz output energy of TPO with MgO:SLN crystal was about 2.75 times larger than that obtained from the MgO:CLN TPO at 1.60 THz. Based on the theoretical analysis, the THz energy enhancement mechanism in the MgO:SLN TPO was clarified to originate from its larger Raman scattering cross section and smaller absorption coefficient.

Realization of Multifunctional Metamaterial Structure Based on the Combination of Vanadium Dioxide and Graphene.

Combining tunable properties and various functionalities into a single metamaterial structure has become a novel research hotspot and can be used to tackle great challenges. The multifunctional metamaterial structure that combines absorption, linear-to-circular (LTC) polarization conversion, filtering and switching functions into a single metamaterial device was designed and investigated in this study. The switching of different functions can be achieved based on the phase transition of vanadium dioxide (VO2) and change of graphene chemical potential. When VO2 is in a metal state, the multi-frequency absorption and LTC polarization conversion can be achieved with different chemical potentials. When VO2 is in the insulator state and the polarization angle of incident wave is 45°, the device can be used to select or isolate the incident waves with different polarization states in the frequency region of 1.2-1.8 THz. Furthermore, when the chemical potentials are 0.05 eV and 1.2 eV, the corresponding transmissions of the TE-polarized wave demonstrate the opposite results, realizing the switching functions in the frequency region of 0.88-1.34 THz. In the frequency region above 2 THz, the multi-frequency rejection filter can be achieved. The designed switchable multifunctional metamaterial device can be widely implemented in radar monitoring and communication systems.