The potential role of stem cells-derived extracellular vesicles in the treatment of musculoskeletal system diseases.

The therapeutic potential of stem cells-derived extracellular vesicles (EVs) has shown a great progress in the regenerative medicine. EVs are rich in a variety of bioactive substances, which are important carriers of signal transmission and interactions between cells, and they play an important role in the processes of tissue repair and regeneration. Several studies have shown that stem cells-derived EVs regulate immunity, promote cell proliferation and differentiation, enhance bone and vascular regeneration, and play an increasingly important role in musculoskeletal system. This review aimed to describe the biological characteristics of stem cells-derived EVs and discuss their potential role in the therapy of musculoskeletal system diseases.

Effects of manipulations of oblique pulling on the biomechanics of the sacroiliac joint: a cadaveric study.

BACKGROUND: There are many reports on the treatment of sacroiliac joint dysfunction by manipulation of oblique pulling (MOP). However, the specific mechanism of MOP on the sacroiliac joint remains unclear. This study aimed to investigate the effect of MOP on the biomechanics of the sacroiliac joint and the effect of the anterior sacroiliac ligament on the stability of the sacroiliac joint. METHODS: First, MOP-F1 (F: force) and MOP-F2 were applied to nine cadaveric pelvises. Then, segmental resection of the anterior sacroiliac ligament was performed. The range of motion of the sacroiliac joint was observed in all procedures. RESULTS: Under MOP-F1 and F2, the average total angles were 0.84° ± 0.59° and 1.52° ± 0.83°, and the displacements were 0.61 ± 0.21 mm and 0.98 ± 0.39 mm, respectively. Compared with MOP-F1, MOP-F2 caused greater rotation angles and displacements of the sacroiliac joint (p = 0.00 and p = 0.01, respectively). In addition, the rotation angles and displacements of the sacroiliac joint significantly increased after complete resection of the anterior sacroiliac ligament (p = 0.01 and p = 0.02, respectively). The increase was mainly due to the transection of the upper part of the anterior sacroiliac ligament. CONCLUSIONS: MOP-F2 caused greater rotation angles and displacements of the sacroiliac joint and was a more effective manipulation. The anterior sacroiliac ligament played an important role in maintaining the stability of the sacroiliac joint; the upper part of the anterior sacroiliac ligament contributed more to the stability of the joint than the lower part.

A novel rat model of interbody fusion based on anterior lumbar corpectomy and fusion (ALCF).

BACKGROUND: Rats have been widely used as experimental animals when performing fundamental research because they are economical, rapidly reproducing, and heal quickly. While the rat interbody fusion model has been applied in basic studies, existing rat models generally have shortcomings, such as insufficiently simulating clinical surgery. The purpose of this study was to develop a novel rat model of interbody fusion which more closely represents clinical surgery. METHODS: The internal fixation was designed based on physical measurements of the rats' lumbar spine. Then, ten rats divided into two groups (A and B) underwent anterior lumbar corpectomy and fusion of the L5 vertebrae. Groups A and B were sacrificed four and 8 weeks post-surgery, respectively. Micro-CT and histological examination were used to evaluate the model. Fusion rate, bone volume fraction (BV/TV), trabecular bone number (Tb.N), trabecular bone thickness (Tb.Th), and the area ratio of newly formed bone (NB) were calculated for quantitative analysis. RESULTS: Based on the L5 body dimensions of individual rats, 3D-printed titanium cage of the appropriate size were printed. The operations were successfully completed in all ten rats, and X-ray confirmed that internal fixation was good without migration. Micro-CT suggested that fusion rates in group B (100%) were greater than group A (40%, P < 0.05). The BV/TV (B: 42.20 ± 10.50 vs. A: 29.02 ± 3.25, P < 0.05) and Tb.N (B: 4.66 ± 1.23 vs. A: 1.97 ± 0.40, P < 0.05) were greater in group B than A, and the Tb.Th in group B was lower than group A (B: 0.10 ± 0.04 vs. A: 0.15 ± 0.02, P < 0.05). Histomorphometry results demonstrated that the area ratio of NB in group B were greater than group A (B: 35.72 ± 12.80 vs. A: 12.36 ± 16.93, P < 0.05). CONCLUSION: A rat interbody fusion model based on anterior lumbar corpectomy and fusion has successfully been constructed and verified. It could provide a new choice for fundamental research using animal models of spinal fusion.

Percutaneous spinal endoscopy with unilateral interlaminar approach to perform bilateral decompression for central lumbar spinal stenosis: radiographic and clinical assessment.

BACKGROUND: Recently, a percutaneous spinal endoscopy unilateral posterior interlaminar approach to perform bilateral decompression has been proposed for use in treatment of lumbar spinal stenosis, As a development and supplement to traditional surgery, its advantages regarding therapeutic effects and prognosis, such as minor soft tissue damage, little intraoperative blood loss, and a quick return to daily life. However, there are few analyses of this surgery with a follow-up of more than 1 year,we conducted this study in order to quantitatively investigate radiographic and clinical efficacies of this surgery for central lumbar spinal stenosis. MATERIALS AND METHODS: Forty-six patients with central lumbar spinal stenosis were enrolled from January 2017 to July 2018. The visual analog scale (VAS) for back pain and leg pain, Oswestry disability index (ODI), modified MacNab criteria were used to evaluate clinical efficiency at preoperative and postoperative time points. The intervertebral height index (IHI), cross-sectional area of the spinal canal (CSAC), calibrated disc signal (CDS) and spinal stability were examined to assess radiographic decompression efficiency via magnetic resonance imaging and X-ray at preoperative and postoperative time points. RESULTS: The VAS score for lower back pain and leg pain improved from 7.50 ± 0.78 to 1.70 ± 0.66 and from 7.30 ± 0.79 to 1.74 ± 0.68, respectively, and the ODI improved from 72.35 ± 8.15 to 16.15 ± 4.51. In terms of modified MacNab criteria, 91.3% of the patients achieved good or excellent outcomes. Furthermore, significant changes after surgery were observed for the percentage of CSAC, increasing from 125.3 ± 53.9 to 201.4 ± 78 mm2; however, no significant differences were observed for the remaining measurement indicators. CONCLUSIONS: The clinical and radiographic efficacies of this surgery for central lumbar spinal stenosis were good in short-term follow-up, and this surgery did not cause meaningful changes in IHI, CDS, and spine stability in short-term follow-up. The effect of long-term follow-up needs further investigation.

Research progress on the biological modifications of implant materials in 3D printed intervertebral fusion cages.

Anterior spine decompression and reconstruction with bone grafts and fusion is a routine spinal surgery. The intervertebral fusion cage can maintain intervertebral height and provide a bone graft window. Titanium fusion cages are the most widely used metal material in spinal clinical applications. However, there is a certain incidence of complications in clinical follow-ups, such as pseudoarticulation formation and implant displacement due to nonfusion of bone grafts in the cage. With the deepening research on metal materials, the properties of these materials have been developed from being biologically inert to having biological activity and biological functionalization, promoting adhesion, cell differentiation, and bone fusion. In addition, 3D printing, thin-film, active biological material, and 4D bioprinting technology are also being used in the biofunctionalization and intelligent advanced manufacturing processes of implant devices in the spine. This review focuses on the biofunctionalization of implant materials in 3D printed intervertebral fusion cages. The surface modifications of implant materials in metal endoscopy, material biocompatibility, and bioactive functionalizationare summarized. Furthermore, the prospects and challenges of the biofunctionalization of implant materials in spinal surgery are discussed. Fig.a.b.c.d.e.f.g As a pre-selected image for the cover, I really look forward to being selected. Special thanks to you for your comments.

Tumor necrosis factor-α: a key contributor to intervertebral disc degeneration.

Intervertebral disc (IVD) degeneration (IDD) is the most common cause leading to low back pain (LBP), which is a highly prevalent, costly, and crippling condition worldwide. Current treatments for IDD are limited to treat the symptoms and do not target the pathophysiology. Tumor necrosis factor-α (TNF-α) is one of the most potent pro-inflammatory cytokines and signals through its receptors TNFR1 and TNFR2. TNF-α is highly expressed in degenerative IVD tissues, and it is deeply involved in multiple pathological processes of disc degeneration, including matrix destruction, inflammatory responses, apoptosis, autophagy, and cell proliferation. Importantly, anti-TNF-α therapy has shown promise for mitigating disc degeneration and relieving LBP. In this review, following a brief description of TNF-α signal transduction, we mainly focus on the expression pattern and roles of TNF-α in IDD, and summarize the emerging progress regarding its inhibition as a promising biological therapeutic approach to disc degeneration and associated LBP. A better understanding will help to develop novel TNF-α-centered therapeutic interventions for degenerative disc disease.

[MicroRNAs: a type of novel regulative factor for intervertebral disc degeneration].

Intervertebral disc degeneration (IDD) is one of major causes for intervertebral disc degenerative diseases, and patients with IDD usually suffer from serious low back pain. The current treatments for patients with IDD only relieve the clinical symptom rather than restore biological balance of IDD, leading to inadequate and unsatisfactory results. MicroRNAs (miRNAs) are endogenous, non-coding, single-stranded RNA molecules, which regulate the gene expression at the post-transcription levels. Research evidences support the involvement of miRNAs in many biological processes, such as lipid metabolism, apoptosis, differentiation and organ development. Accumulating evidences indicate that the expressions of miRNAs change significantly in degenerative tissues. In addition, dysregulated miRNAs contribute to multiple pathological process of IDD, including proliferation and apoptosis of nucleus pulposus and extracellular matrix components, inflammatory response and cartilage endplates degeneration. In this review article, we summarize the expression profiles and roles of miRNAs in IDD, which may provide a novel strategy of biological therapy for the disease.

Clinical effect evaluation of percutaneous vertebroplasty combined with the spinal external fixator for the treatment of osteoporotic compressive fractures with posterior vertebral defect.

PURPOSE: The purpose of this study is to report a new technique and assess clinical outcome of compressive fractures with posterior vertebral defect treated by percutaneous vertebroplasty combined with the spinal external fixator. METHOD: 80 patients (32 males and 48 females), ranging from 62 to 88 years old with the mean age of 71.5 years, underwent surgery for the compressive fractures with posterior vertebral defect by percutaneous vertebroplasty combined with the spinal external fixator. All patients were diagnosed to have fresh compressive fractures with osteoporosis and posterior vertebral defect shown on roentgenograms, computed tomography scans or magnetic resonance imaging preoperatively. They underwent spinal external fixation firstly to be fixed and restored, then to be carried out percutaneous vertebroplasty. The mean follow-up was 24 months (16-42 months). Spinal canal encroachment, spinal cobb angle and vertebral body height loss were measured to assess clinical outcome before and after surgery, at the final follow-up. The Visual Analogue Scale and Oswestry Disability Index were used for pain and functional assessment. In all cases, preoperative and postoperative radiographs and magnetic resonance imaging were obtained. RESULTS: The average time of surgery was 88 min (75-115 min). The mean blood loss was 10 ml (6-12 ml) during surgery. The anterior height loss of vertebral body decreased significantly from 79.3 ± 11% before surgery to 8.0 ± 5.2% after surgery, and 7.6 ± 6.0% at the final follow-up. The spinal canal encroachment significantly reduced from 19.9 ± 2.6 % preoperatively to 4.0 ± 0.7% postoperatively, 4.1 ± 0.7% at the final follow-up. The Cobb angle was corrected from 25.8 ± 7.9° primarily to 8.2 ± 4.1° postoperatively, 7.8 ± 3.1° at the final follow-up. There were significant differences (p < 0.05) among them before and after the surgery. Postoperative VAS and Oswestry scores were both significantly different from the preoperative and follow-up (p < 0.05). CONCLUSION: The preliminary results are encouraging, showing that the spinal external fixator combined with percutaneous vertebroplasty was a safe and effective method to treat the osteoporotic compressive fractures with posterior vertebral defect.

Biomechanical analysis of the tandem spinal external fixation in a multiple-level noncontiguous lumbar fractures model: a finite element analysis.

Objective: This study aimed to investigate the biomechanical characteristics of the tandem spinal external fixation (TSEF) for treating multilevel noncontiguous spinal fracture (MNSF) using finite element analysis and provide a theoretical basis for clinical application. Methods: We constructed two models of L2 and L4 vertebral fractures that were fixed with the TSEF and the long-segment spinal inner fixation (LSIF). The range of motion (ROM), maximum stresses at L2 and L4 vertebrae, the screws and rods, and the intervertebral discs of the two models were recorded under load control. Subsequently, the required torque, the maximum stress at L2 and L4 vertebrae, the screws and rods, and the intervertebral discs were analyzed under displacement control. Results: Under load control, the TSEF model reserved more ROM than the LSIF model. The maximum stresses of screws in the TSEF model were increased, while the maximum stresses of rods were reduced compared to the LSIF model. Moreover, the maximum stresses of L2 and L4 vertebrae and discs in the TSEF model were increased compared to the LSIF model. Under displacement control, the TSEF model required fewer moments (N·mm) than the LSIF model. Compared to the LSIF model, the maximum stresses of screws and rods in the TSEF model have decreased; the maximum stresses at L2 and L4 in the TSEF model were increased. In the flexion condition, the maximum stresses of discs in the TSEF model were less than the LSIF model, while the maximum stresses of discs in the TSEF model were higher in the extension condition. Conclusion: Compared to LSIF, the TSEF has a better stress distribution with higher overall mobility. Theoretically, it reduces the stress concentration of the connecting rods and the stress shielding of the fractured vertebral bodies.

Integrating single-cell and spatial transcriptomics reveals endoplasmic reticulum stress-related CAF subpopulations associated with chordoma progression.

BACKGROUND: With cancer-associated fibroblasts (CAFs) as the main cell type, the rich myxoid stromal components in chordoma tissues may likely contribute to its development and progression. METHODS: Single-cell RNA sequencing (scRNA-seq), spatial transcriptomics, bulk RNA-seq, and multiplexed quantitative immunofluorescence (QIF) were used to dissect the heterogeneity, spatial distribution, and clinical implication of CAFs in chordoma. RESULTS: We sequenced here 72 097 single cells from 3 primary and 3 recurrent tumor samples, as well as 3 nucleus pulposus samples as controls using scRNA-seq. We identified a unique cluster of CAF in recurrent tumors that highly expressed hypoxic genes and was functionally enriched in endoplasmic reticulum stress (ERS). Pseudotime trajectory and cell communication analyses showed that this ERS-CAF subpopulation originated from normal fibroblasts and widely interacted with tumoral and immune cells. Analyzing the bulk RNA-seq data from 126 patients, we found that the ERS-CAF signature score was associated with the invasion and poor prognosis of chordoma. By integrating the results of scRNA-seq with spatial transcriptomics, we demonstrated the existence of ERS-CAF in chordoma tissues and revealed that this CAF subtype displayed the most proximity to its surrounding tumor cells. In subsequent QIF validation involving 105 additional patients, we confirmed that ERS-CAF was abundant in the chordoma microenvironment and located close to tumor cells. Furthermore, both ERS-CAF density and its distance to tumor cells were correlated with tumor malignant phenotype and adverse patient outcomes. CONCLUSIONS: These findings depict the CAF landscape for chordoma and may provide insights into the development of novel treatment approaches.