A sensitive fluorescent sensor based on the photoinduced electron transfer mechanism for cefixime and ctDNA.

Cefixime is a third generation orally administered cephalosporin that is frequently used as a broad spectrum antibiotic against various gram-negative and gram-positive bacteria. In this study, a simple and sensitive fluorescent sensor for the determination of the cefixime and ctDNA was established based on the CdTe:Zn2+ quantum dots (QDs). The fluorescence of CdTe:Zn2+ QDs can be effectively quenched by cefixime in virtue of the surface binding of cefixime on CdTe:Zn2+ QDs and the subsequent photoinduced electron transfer process from CdTe:Zn2+ QDs to cefixime, in particular, the high sensitivity of QDs fluorescence emission to cefixime at the micromole per liter level, which render the cefixime-CdTe:Zn2+ QDs system into fluorescence "OFF" status, then turn on in the presence of ctDNA. Furthermore, the Fourier transform infrared (FTIR) spectra of characteristic bands of C-N and N-H groups of cefixime endow evidence for the interaction of cefixime with CdTe:Zn2+ QDs. The relative electrochemical behavior of the affinity of CdTe:Zn2+ QDs for cefixime and ctDNA reveals the potential molecular binding mechanism.

One-pot synthesis and characterization CdTe:Zn2+ quantum dots and its molecular interaction with calf thymus DNA.

Tremendous research efforts have been dedicated to fabricating high-quality Zn-doped CdTe quantum dots (QDs) for any potential biomedical applications. In particular, the correlation of issues regarding how QDs interact with DNA is of greatest importance. Herein, a pH-responsive study of the interactions between CdTe:Zn2+ quantum dots with 4 different sizes and calf thymus DNA (ctDNA) was conducted using multispectroscopic techniques and electrochemical investigation. Fluorescence studies revealed that this interaction process is predominantly a static process and groove binding was the main binding mode for CdTe:Zn2+ QDs to ctDNA. The calculated negative values of enthalpy (-45.06 kJ mol-1 ) and entropy (-133.62 J mol-1  K-1 ) with temperature changes indicated that the hydrogen bonds and van der Waals interactions played major roles in the reaction. Furthermore, circular dichroism spectroscopy and Fourier transform infrared spectrometry analyses indicate that the normal conformation of ctDNA is discombobulated by CdTe:Zn2+ QDs. In addition, the electrochemical behavior of the affinity of CdTe:Zn2+ QDs for ctDNA agreed well with the results obtained from fluorescence experiments. This study might be meaningful for understanding the molecular binding mechanism of QDs for DNA and provides a basis for QD-labeled systems.

Probing the interaction of cephalosporin with bovine serum albumin: A structural and comparative perspective.

Cephalosporins belong the largest class of antibiotics used in the treatment of a wide range of infectious diseases caused by susceptible organisms. In the present study, we chose two typical antibiotics cefalexin/cefixime based on their structure, and investigated the interaction of cephalexin/cefixime with bovine serum albumin (BSA) using UV-vis absorption spectra, fluorescence spectroscopy, circular dichroism (CD) spectroscopy and molecular modeling approaches. Spectroscopic experiments revealed the formation of a BSA - cefalexin/cefixime complex. The binding parameters calculated using a modified Stern - Volmer method and the Scatchard method reached 103 -104  L·mol-1 . Thermodynamic parameter studies revealed that binding characteristics by negative enthalpy and positive entropy changes, and electrostatic interactions play a major role. Site marker competitive displacement experiments and molecular modeling approaches demonstrated that cefalexin and cefixime bind with appropriate affinity to site I (subdomain IIA) of BSA. Furthermore, synchronous fluorescence spectra, CD spectra and molecular modeling results indicated that the secondary structure of BSA was changed in the presence of cefalexin and cefixime. Additionally, the effects of metal ions on the BSA - cefalexin/cefixime system were also assessed.

Negative-pressure-induced collector for a self-balance free-flow electrophoresis device.

Uneven flow in free-flow electrophoresis (FFE) with a gravity-induced fraction collector caused by air bubbles in outlets and/or imbalance of the surface tension of collecting tubes would result in a poor separation. To solve these issues, this work describes a novel collector for FFE. The collector is composed of a self-balance unit, multisoft pipe flow controller, fraction collector, and vacuum pump. A negative pressure induced continuous air flow rapidly flowed through the self-balance unit, taking the background electrolyte and samples into the fraction collector. The developed collector has the following advantages: (i) supplying a stable and harmonious hydrodynamic environment in the separation chamber for FFE separation, (ii) effectively preventing background electrolyte and sample flow-back at the outlet of the chamber and improving the resolution, (iii) increasing the preparative scale of the separation, and (iv) simplifying the operation. In addition, the cost of the FFE device was reduced without using a multichannel peristaltic pump for sample collection. Finally, comparative FFE experiments on dyes, proteins, and cells were carried out. It is evident that the new developed collector could overcome the problems inherent in the previous gravity-induced self-balance collector.

Experimental study on the optimization of general conditions for a free-flow electrophoresis device with a thermoelectric cooler.

With a given free-flow electrophoresis device, reasonable conditions (electric field strength, carrier buffer conductivity, and flow rate) are crucial for an optimized separation. However, there has been no experimental study on how to choose reasonable general conditions for a free-flow electrophoresis device with a thermoelectric cooler in view of Joule heat generation. Herein, comparative experiments were carried out to propose the selection procedure of general conditions in this study. The experimental results demonstrated that appropriate conditions were (i) <67 V/cm electric field strength; (ii) lower than 1.3 mS/cm carrier buffer conductivity (Tris-HCl: 20 mM Tris was titrated by HCl to pH 8.0); and (iii) higher than 3.6 mL/min carrier buffer flow rate. Furthermore, under inappropriate conditions (e.g. 400 V voltage and 40 mM Tris-HCl carrier buffer), the free-flow electrophoresis separation would be destroyed by bubbles caused by more Joule heating. Additionally, a series of applications under the appropriate conditions were performed with samples of model dyes, proteins (bovine serum albumin, myoglobin, and cytochrome c), and cells (Escherichia coli, Streptococcus thermophilus, and Saccharomyces cerevisiae). The separation results showed that under the appropriate conditions, separation efficiency was obviously better than that in the previous experiments with randomly or empirically selected conditions.

A simple and highly stable free-flow electrophoresis device with thermoelectric cooling system.

Complex assembly, inconvenient operations, poor control of Joule heating and leakage of solution are still fundamental issues greatly hindering application of free-flow electrophoresis (FFE) for preparative purpose in bio-separation. To address these issues, a novel FFE device was developed based on our previous work. Firstly, a new mechanical structure was designed for compact assembly of separation chamber, fast removal of air bubble, and good anti-leakage performance. Secondly, a highly efficient thermoelectric cooling system was used for dispersing Joule heating for the first time. The systemic experiments revealed the three merits: (i) 3min assembly without any liquid leakage, 80 times faster than pervious FFE device designed by us or commercial device (4h); (ii) 5s removing of air bubble in chamber, 1000-fold faster than a normal one (2h or more) and (iii) good control of Joule heating by the cooling system. These merits endowed the device high stable thermo- and hydro-dynamic flow for long-term separation even under high electric field of 63V/cm. Finally, the developed device was used for up to 8h continuous separation of 5mg/mL fuchsin acid and purification of three model proteins of phycocyanin, myoglobin and cytochrome C, demonstrating the applicability of FFE. The developed FFE device has evident significance to the studies on stem cell, cell or organelle proteomics, and protein complex as well as micro- or nano-particles.

[Revision of submucous resection of nasal septum].

OBJECTIVE: To explore the clinical significance and surgical technique for revisionary submucous resection of nasal septum. METHODS: Thirty-two patients who had undergone nasal septal resection were evaluated rhinologically and the causes of unsuccessful septoplasty were analysed . Based on the location and extent of deviation, the status of residual cartilage and bone, and the age of the patients, one of three incisions was chosen during septal surgeries: (1) For 5 cases with anterior, 1 with inferior and 14 with superior deviation, a "U" shaped incision at the left side of anterior edge of septum cartilage was used. (2) For 8 cases with posterior and 2 with superior deviation, the site of the incision was located just anterior to the deviation, with the aid of endoscope. (3) For 2 cases with anteroinferior deviation, because of their young age, a sublabial incision was made to surge the mucosa of the septum and base of nasal cavity, the otological electronic drill was then used. RESULTS: Revision nasal septoplasty was successful in all cases. The symptoms resulting from septal deviation disappeared or significantly relieved. Following successful revision surgery, the treatment outcomes of concomitant nasal and/or sinusal diseases also significantly improved. CONCLUSION: Revision nasal septoplasty requires different approaches depending on different clinical characteristics. A successful correction of septal deviation can not only relieve the symptoms derived from deviation, but also be of significance for the treatment of concomitant nasal and/or sinusal diseases.

[Twenty four cases of cholesterol granuloma of the paranasal sinuses].

OBJECTIVE: To investigate the etiology and pathogenesis of cholesterol granuloma of the paranasal sinuses and the treatment for the disease. METHODS: Twenty four cases of cholesterol granuloma of the paranasal sinuses treated in our hospital during the period from March 1996 to March 2003 were retrospectively analysed. All cases were verified by surgery and pathology. RESULTS: Of all cases, 10 cases were diagnosed as chronic sinusitis, 8 cases as nasal sinus cyst, and 5 cases as nasal polyp before operation, only 1 case was considered as cholesterol granuloma. The main symptoms were nasal obstruction (20/24), rhinorrhea (18/24), dysosmia (10/24), headache (7/24), pain around the eye (5/24), double vision (2/24), et al. Different surgical approaches were selected depending upon different pathological changes. Good results were obtained in 23 cases and postoperative follow-up for at least one year showed no recurrence. Only one case received revision nasal endoscopic surgery two years after Caldwell-Luc operation because of recurrence, and remained symptom-free for three years. CONCLUSIONS: The pathogenesis of cholesterol granuloma includes obstruction of ventilation and drainage and brooding in sinuses. Cholesterol granuloma of the paranasal sinuses seems to have a close relation with chronic sinusitis, especially sinus mucocele. The surgical approach depends upon the location, extension, and severity of the lesion. The principle of surgery is to eliminate the pathological focus and create an adequate drainage.