Interface-confined intermediate phase in TiO2 enables efficient photocatalysis.

As a prototypical photocatalyst, TiO[Formula: see text] has been extensively studied. An interesting yet puzzling experimental fact was that P25-a mixture of anatase and rutile TiO[Formula: see text]-outperforms the individual phases; the origin of this mysterious fact, however, remains elusive. Employing rigorous first-principles calculations, here we uncover a metastable intermediate structure (MIS), which is formed due to confinement at the anatase/rutile interface. The MIS has a high conduction-band minimum level and thus substantially enhances the overpotential of the hydrogen evolution reaction. Also, the corresponding band alignment at the interface leads to efficient separation of electrons and holes. The interfacial confinement additionally creates a wide distribution of the band gap in the vicinity of the interface, which in turn improves optical absorption. These factors all contribute to the enhanced photocatalytic efficiency in P25. Our insights provide a rationale to the puzzling superior photocatalytic performance of P25 and enable a strategy to achieve highly efficient photocatalysis via interface engineering.

Crystal Facet Engineering on SrTiO3 Enhances Photocatalytic Overall Water Splitting.

Single-crystal semiconductor-based photocatalysts exposing unique crystallographic facets show promising applications in energy and environmental technologies; however, crystal facet engineering through solid-state synthesis for photocatalytic overall water splitting is still challenging. Herein, we develop a novel crystal facet engineering strategy through solid-state recrystallization to synthesize uniform SrTiO3 single crystals exposing tailored {111} facets. The presynthesized low-crystalline SrTiO3 precursors enable the formation of well-defined single crystals through kinetically improved crystal structure transformation during solid-state recrystallization process. By employing subtle Al3+ ions as surface morphology modulators, the crystal surface orientation can be precisely tuned to a controlled percentage of {111} facets. The photocatalytic overall water splitting activity increases with the exposure percentage of {111} facets. Owing to the outstanding crystallinity and favorable anisotropic surface structure, the SrTiO3 single crystals with 36.6% of {111} facets lead to a 3-fold enhancement of photocatalytic hydrogen evolution rates up to 1.55 mmol·h-1 in a stoichiometric ratio of 2:1 than thermodynamically stable SrTiO3 enclosed with isotropic {100} facets.

Anionic Metal-Organic Framework Derived Cu Catalyst for Selective CO2 Electroreduction to Hydrocarbons.

Metal-organic frameworks (MOFs)-related Cu materials are promising candidates for promoting electrochemical CO2 reduction to produce valuable chemical feedstocks. However, many MOF materials inevitable undergo reconstruction under reduction conditions; therefore, exploiting the restructuring of MOF materials is of importance for the rational design of high-performance catalyst targeting multi-carbon products (C2). Herein, a facile solvent process is choosed to fabricate HKUST-1 with an anionic framework (a-HKUST-1) and utilize it as a pre-catalyst for alkaline CO2RR. The a-HKUST-1 catalyst can be electrochemically reduced into Cu with significant structural reconstruction under operating reaction conditions. The anionic HKUST-1 derived Cu catalyst (aHD-Cu) delivers a FEC2H4 of 56% and FEC2 of ≈80% at -150 mA cm-2 in alkaline electrolyte. The resulting aHD-Cu catalyst has a high electrochemically active surface area and low coordinated sites. In situ Raman spectroscopy indicates that the aHD-Cu surface displays higher coverage of *CO intermediates, which favors the production of hydrocarbons.

Self-Reconstruction of Sulfate-Terminated Copper Oxide Nanorods for Efficient and Stable 5-Hydroxymethylfurfural Electrooxidation.

The electrochemical 5-hydroxymethylfurfural oxidation reaction (HMFOR) has been regarded as a viable alternative to sustainable biomass valorization. However, the transformation of the catalysts under harsh electrooxidation conditions remains controversial. Herein, we confirm the self-construction of cuprous sulfide nanosheets (Cu2S NSs) into sulfate-terminated copper oxide nanorods (CuO-SO42- NRs) during the first-cycle of the HMFOR, which achieves a near-quantitative synthesis of 2,5-furandicarboxylic acid (FDCA) with a >99.9% yield and faradaic efficiency without deactivation in 15 successive cycles. Electrochemical impedance spectroscopies confirm that the surface SO42- effectively reduces the onset potential for HMFOR, while in situ Raman spectroscopies identify a reversible transformation from CuII-O to CuIII-OOH in HMFOR. Furthermore, density functional theory calculations reveal that the surface SO42- weakens the Cu-OH bonds in CuOOH to promote the rate-determining step of its coupling with the C atom in HMF-H* resulting from HMF hydrogenation, which synergistically enhances the catalytic activity of CuO-SO42- NRs toward HMF-to-FDCA conversion.

In situ/Operando Synchrotron Radiation Analytical Techniques for CO2/CO Reduction Reaction: From Atomic Scales to Mesoscales.

Electrocatalytic carbon dioxide/carbon monoxide reduction reaction (CO(2)RR) has emerged as a prospective and appealing strategy to realize carbon neutrality for manufacturing sustainable chemical products. Developing highly active electrocatalysts and stable devices has been demonstrated as effective approach to enhance the conversion efficiency of CO(2)RR. In order to rationally design electrocatalysts and devices, a comprehensive understanding of the intrinsic structure evolution within catalysts and micro-environment change around electrode interface, particularly under operation conditions, is indispensable. Synchrotron radiation has been recognized as a versatile characterization platform, garnering widespread attention owing to its high brightness, elevated flux, excellent directivity, strong polarization and exceptional stability. This review systematically introduces the applications of synchrotron radiation technologies classified by radiation sources with varying wavelengths in CO(2)RR. By virtue of in situ/operando synchrotron radiationanalytical techniques, we also summarize relevant dynamic evolution processes from electronic structure, atomic configuration, molecular adsorption, crystal lattice and devices, spanning scales from the angstrom to the micrometer. The merits and limitations of diverse synchrotron characterization techniques are summarized, and their applicable scenarios in CO(2)RR are further presented. On the basis of the state-of-the-art fourth-generation synchrotron facilities, a perspective for further deeper understanding of the CO(2)RR process using synchrotron radiation analytical techniques is proposed.

Operando Stable Palladium Hydride Nanoclusters Anchored on Tungsten Carbides Mediate Reverse Hydrogen Spillover for Hydrogen Evolution.

Proton exchange membrane (PEM) electrolysis holds great promise for green hydrogen production, but suffering from high loading of platinum-group metals (PGM) for large-scale deployment. Anchoring PGM-based materials on supports can not only improve the atomic utilization of active sites but also enhance the intrinsic activity. However, in practical PEM electrolysis, it is still challenging to mediate hydrogen adsorption/desorption pathways with high coverage of hydrogen intermediates over catalyst surface. Here, operando generated stable palladium (Pd) hydride nanoclusters anchored on tungsten carbide (WCx) supports were constructed for hydrogen evolution in PEM electrolysis. Under PEM operando conditions, hydrogen intercalation induces formation of Pd hydrides (PdHx) featuring weakened hydrogen binding energy (HBE), thus triggering reverse hydrogen spillover from WCx (strong HBE) supports to PdHx sites, which have been evidenced by operando characterizations, electrochemical results and theoretical studies. This PdHx-WCx material can be directly utilized as cathode electrocatalysts in PEM electrolysis with ultralow Pd loading of 0.022 mg cm-2, delivering the current density of 1 A cm-2 at the cell voltage of ~1.66 V and continuously running for 200 hours without obvious degradation. This innovative strategy via tuning the operando characteristics to mediate reverse hydrogen spillover provide new insights for designing high-performance supported PGM-based electrocatalysts.

Polar Aromatic Two-dimensional Dion-Jacobson Halide Perovskites for Efficient Photocatalytic H2 Evolution.

Polar materials with spontaneous polarization (Ps) have emerged as highly promising photocatalysts for efficient photocatalytic H2 evolution owing to the Ps-enhanced photogenerated carrier separation. However, traditional inorganic polar materials often suffer from limitations such as wide band gaps and poor carrier transport, which hinders their photocatalytic H2 evolution efficiency. Here, we rationally synthesized a series of isostructural two-dimensional (2D) aromatic Dion-Jacobson (DJ) perovskites, namely (2-(2-Aminoethyl)pyridinium)PbI4 (2-APDPI), (3-(2-Aminoethyl)pyridinium)PbI4 (3-APDPI), and (4-(2-Aminoethyl)pyridinium)PbI4 (4-APDPI), where 2-APDPI and 4-APDPI crystalize in polar space groups with piezoelectric constants (d33) of approximately 40 pm V-1 and 3-APDPI adopts a centrosymmetric structure. Strikingly, owing to the Ps-facilitated separation of photogenerated carriers, polar 2-APDPI and 4-APDPI exhibit a 3.9- and 2.8-fold increase, respectively, in photocatalytic H2 evolution compared to the centrosymmetric 3-APDPI. As a pioneering study, this work provides an efficient approach for exploring new polar photocatalysts and highlights their potential in promoting photocatalytic H2 evolution.

Amorphous Oxysulfide Reconstructed from Spinel NiCo2 S4 for Efficient Water Oxidation.

The progress of effective and durable electrocatalysts for oxygen evolution reaction (OER) is urgent, which is essential to promote the overall efficiency of green hydrogen production. To improve the performance of spinel cobalt-based oxides, which serve as promising water oxidation electrocatalysts in alkaline electrolytes, most researches have been concentrated on cations modification. Here, an anionic regulation mechanism is employed to adopt sulfur(S) anion substitution to supplant NiCo2 O4 by NiCo2 S4 , which contributed to an impressive OER performance in alkali. It is revealed that the substitution of S constructs a sub-stable spinel structure that facilitates its reconstruction into active amorphous oxysulfide under OER conditions. More importantly, as the active phase in the actual reaction process, the hetero-anionic amorphous oxysulfide has an appropriately tuned electronic structure and efficient OER electrocatalytic activity. This work demonstrates a promising approach for achieving anion conditioning-based tunable structure reconstruction for robust and easy preparation spinel oxide OER electrocatalysts.

Isolation of Highly Reactive Cobalt Phthalocyanine via Electrochemical Activation for Enhanced CO2 Reduction Reaction.

Electrochemical CO2 -to-CO conversion offers an attractive and efficient route to recycle CO2 greenhouse gas. Molecular catalysts, like CoPc, are proved to be possible replacement for precious metal-based catalysts. These molecules, a combination of metal center and organic ligand molecule, may evolve into single atom structure for enhanced performance; besides, the manipulation of molecules' behavior also plays an important role in mechanism research. Here, in this work, the structure evolution of CoPc molecules is investigated via electrochemical-induced activation process. After numbers of cyclic voltammetry scanning, CoPc molecular crystals become cracked and crumbled, meanwhile the released CoPc molecules migrate to the conductive substrate. Atomic-scale HAADF-STEM proves the migration of CoPc molecules, which is the main reason for the enhancement in CO2 -to-CO performance. The as-activated CoPc exhibits a maximum FECO of 99% in an H-type cell and affords a long-term durability at 100 mA cm-2 for 29.3 h in a membrane electrode assembly reactor. Density-functional theory (DFT) calculation also demonstrates a favorable CO2 activation energy with such an activated CoPc structure. This work provides a different perspective for understanding molecular catalysts as well as a reliable and universal method for practical utilization.

Heterogeneous Fe-Doped Ni(OH)2 Grown on Nickel Mesh by Electrodeposition for Efficient Alkaline Oxygen Evolution Reaction.

Designing highly excellent and stable catalysts for alkaline oxygen evolution reaction (OER) is gradually pivotal for clean energy development. In this work, a heterogeneous Fe-doped Ni(OH)2 (Ni/Fe-0.1) was developed via simple one-step electrodeposition onto nickel mesh. The heterogeneous interface structure generates sufficient active sites, significantly improving OER performance with an overpotential of 174 mV at 10 mA cm-2 (η10 ), while Tafel slope is only 43.0 mV dec-1 . In particular, Ni/Fe-0.1 is still able to operate stably at a current density of 1 A cm-2 for 100 h without obvious potential decay. The oxidation of Ni2+ to Ni3+ was detected by X-ray photoelectron spectroscopy, proving that the heterogeneous catalyst could stabilize the high-valence state of nickel as active sites to its superior OER performance. This work provides a convenient synthetic strategy for forming heterogeneous catalysts toward efficient water electrolysis.

Spontaneous Formation of Heterostructured Perovskite Films for Photovoltaic Application.

Perovskite solar cells (PSCs) are the one of most promising photovoltaic technologies that can be achieved by a simple solution process. At the current stage, the key issues concern further improvements in efficiency and operational lifetime. Constructing a self-assembled perovskite structure with manipulated chemical and physical properties is a useful and effective strategy to solve these problems. Herein, we review the basic principles of and recent progress in the spontaneous formation behavior of heterostructured perovskite thin films. This concept provides insightful clues for the design and fabrication of stable and efficient PSCs for next-generation photovoltaics.

A Conformal Carbon Nanolayer Coated Fe2 O3 Cocatalyst for the Promoted Activity of Plasma-Sputtered BiVO4 Photoanode.

To simultaneously improve the hole extraction ability of the BiVO4 photoanode and accelerate the surface reaction kinetics, herein, a carbon nanolayer conformally coated Fe2 O3 (C-Fe2 O3 ) as oxygen evolution catalyst (OEC) is loaded on the H2 plasma treated nanoporous BiVO4 (BVO(H2 )) surface by a hydrothermal reaction. It is found that the H2 plasma induced vacancies in BVO remarkably increases the conductivity, and the C-Fe2 O3 enables hole extraction from the bulk to the surface as well as efficient hole injection to the electrolyte. As a result, the C-Fe2 O3 /BVO(H2 ) photoanode achieves a photocurrent density of 4.4 mA/cm2 at 1.23 V vs. reversible hydrogen electrode (RHE) and an ABPE value of 1.5 % at 0.68 V vs. RHE, which are 4.8-fold and 13-fold higher than that of BVO photoanode, respectively.

Ruthenium and Iron Co-doped Molybdenum Carbide as a Stable Hydrogen Evolution Electrocatalyst in Harsh Electrolyte.

Electrocatalytic water splitting is one of the most commercially valuable pathways of hydrogen production especially combined with renewable electricity; however, efficient and durable electrocatalysts are urgently needed to reduce electric energy consumption. Here, we reported a Ru and Fe co-doped Mo2 C on nitrogen doped carbon via a controllable two-step method, which can be used for efficient and enduring hydrogen evolution reaction. At 10, 100 and 200 mA cm-2 in acidic electrolyte, the resultant Ru-Fe/Mo2 C@NC delivered low overpotentials of 31, 78 and 103 mV, respectively, which are comparable to that of the commercial Pt/C (20 wt %). At an applied current density of 100 mA cm-2 , stable hydrogen production was conducted for 120 h without obvious degradation. In alkaline media, Ru-Fe/Mo2 C@NC can also deliver a current density of 100 mA cm-2 for more than 100 h. Furthermore, the Ru-Fe/Mo2 C@NC electrocatalyst was used as cathode in an anion exchange membrane water electrolyzer under industrial environments for robust hydrogen production. The characterization and electrochemical results prove the synergism effects between Ru, Fe dopants and Mo2 C for promoting hydrogen evolution activity. This work would pave a new avenue to fabricate low-cost, high-performance hydrogen evolution electrocatalysts for industrial water electrolyzers.

Positive Valent Metal Sites in Electrochemical CO2 Reduction Reaction.

The discovery of high-performance catalysts for the electrochemical CO2 reduction reaction (CO2 RR) has faced an enormous challenge for years. The lack of cognition about the surface active structures or centers of catalysts in complex conditions limits the development of advanced catalysts for CO2 RR. Recently, the positive valent metal sites (PVMS) are demonstrated as a kind of potential active sites, which can facilitate carbon dioxide (CO2 ) activation and conversation but are always unstable under reduction potentials. Many advanced technologies in theory and experiment have been utilized to understand and develop excellent catalysts with PVMS for CO2 RR. Here, we present an introduction of some typical catalysts with PVMS in CO2 RR and give some understanding of the activity and stability for these related catalysts.

Tuning the Microenvironment in Monolayer MgAl Layered Double Hydroxide for CO2 -to-Ethylene Electrocatalysis in Neutral Media.

The electrocatalytic reduction of carbon dioxide provides a feasibility to achieve a carbon-neutral energy cycle. However, there are a number of bottleneck issues to be resolved before industrial application, such as the low conversion efficiency, selectivity and reaction rate, etc. Engineering local environment is a critical way to address these challenges. Here, a monolayer MgAl-LDH was proposed to optimize the local environment of Cu for stimulating industrial-current-density CO2 -to-C2 H4 electroreduction in neutral media. In situ spectroscopic results and theoretical study demonstrated that the Cu electrode modified by MgAl-LDH (MgAl-LDH/Cu) displayed a much higher surface pH value compared to the bare Cu, which could be attributed to the decreased energy barrier for hydrolysis on MgAl-LDH sites with more OH- ions on the surface of the electrode. As a result, MgAl-LDH/Cu achieved a C2 H4 Faradaic efficiency of 55.1 % at a current density up to 300 mA cm-2 in 1.0 M KHCO3 electrolyte.

Hydrogen Spillover-Bridged Volmer/Tafel Processes Enabling Ampere-Level Current Density Alkaline Hydrogen Evolution Reaction under Low Overpotential.

Water-alkaline electrolysis holds a great promise for industry-scale hydrogen production but is hindered by the lack of enabling hydrogen evolution reaction electrocatalysts to operate at ampere-level current densities under low overpotentials. Here, we report the use of hydrogen spillover-bridged water dissociation/hydrogen formation processes occurring at the synergistically hybridized Ni3S2/Cr2S3 sites to incapacitate the inhibition effect of high-current-density-induced high hydrogen coverage at the water dissociation site and concurrently promote Volmer/Tafel processes. The mechanistic insights critically important to enable ampere-level current density operation are depicted from the experimental and theoretical studies. The Volmer process is drastically boosted by the strong H2O adsorption at Cr5c sites of Cr2S3, the efficient H2O* dissociation via a heterolytic cleavage process (Cr5c-H2O* + S3c(#) → Cr5c-OH* + S3c-H#) on the Cr5c/S3c sites in Cr2S3, and the rapid desorption of OH* from Cr5c sites of Cr2S3 via a new water-assisted desorption mechanism (Cr5c-OH* + H2O(aq) → Cr5c-H2O* + OH-(aq)), while the efficient Tafel process is achieved through hydrogen spillover to rapidly transfer H# from the synergistically located H-rich site (Cr2S3) to the H-deficient site (Ni3S2) with excellent hydrogen formation activity. As a result, the hybridized Ni3S2/Cr2S3 electrocatalyst can readily achieve a current density of 3.5 A cm-2 under an overpotential of 251 ± 3 mV in 1.0 M KOH electrolyte. The concept exemplified in this work provides a useful means to address the shortfalls of ampere-level current-density-tolerant Hydrogen evolution reaction (HER) electrocatalysts.

Operando High-Valence Cr-Modified NiFe Hydroxides for Water Oxidation.

High-valence metal-doped multimetal (oxy)hydroxides outperform noble metal electrocatalysts for the oxygen evolution reaction (OER) owing to the modified energetics between 3d metals and high-valence dopants. However, the rational design of sufficient and subtle modulators is still challenging. With a multimetal layered double hydroxide (LDH) as the OER catalyst, this study introduces a series of operando high-valence dopants (Cr, Ru, Ce, and V), which can restrict the 3+ valence states in the LDH template to prevent phase separation and operando transfer to the >3+ valence states for sufficient electronic interaction during the OER process. Through density functional theory simulations, ultrathin Cr-doped NiFe (NiFeCr) LDH is synthesized with strong electronic interaction between Cr dopants and NiFe bimetallic sites, evidenced by X-ray absorption spectroscopy. The resulting NiFeCr-LDH catalyzes the OER with ultralow overpotentials of 189 and 284 mV, obtaining current densities of 10 and 1000 mA cm-2 , respectively. Further, a NiFeCr-LDH anode is coupled in the anion exchange membrane electrolyzers to promote alkaline water splitting and CO2 -to-CO electrolysis, which achieves low full cell voltages at high current densities.

Reverse Replacement in NH2 -MIL-125 with 1,4-Dicarboxybenzene for Enhanced Photocatalytic Hydrogen Generation.

Metal-organic frameworks (MOFs) constructed by ligands and metal clusters, have been considered as a promising material for photocatalytic water splitting. In this work, a solvent-assisted ligand exchange (SALE) method has been applied through partial reverse substitution of the ligand in NH2 -MIL-125 (Ti) by 1,4-dicarboxybenzene (BDC). This modification strategy can optimize the charge transfer dynamics together with the preserved light absorption, resulting in a 3.3 times higher hydrogen production rate compared to the pristine material under visible-light irradiation. This work broadens the field of ligand modifications of MOFs to boost the photocatalytic performance.

A Self-Formed Stable PbI2 /NiOx Interface with Increased Ni3+ Centers for Perovskite Photovoltaics.

Nickel oxide (NiOx ) is a promising hole transport material (HTM) for perovskite photovoltaics owing to its chemical stability and low cost. However, most NiOx based solar cells deliver relatively weak performance because of its insufficient electrical property and interfacial contact. In this work, a self-formed PbI2 /NiOx interface was developed to stabilize the Ni3+ centers, which was beneficial for electrical transport and band alignment in perovskite solar cells. Combined with ultraviolet ozone treatment (UVO) and sequential deposition, the density of Ni3+ centers was greatly increased and could be stabilized by the PbI2 interface. These merits contributed coordinately to the fast hole extraction and low energy loss across the PbI2 /NiOx interface, yielding power conversion efficiencies (PCEs) of over 19 %.

Highly Ethylene-Selective Electrocatalytic CO2 Reduction Enabled by Isolated Cu-S Motifs in Metal-Organic Framework Based Precatalysts.

Copper-based materials are efficient electrocatalysts for the conversion of CO2 to C2+ products, and most these materials are reconstructed in situ to regenerate active species. It is a challenge to precisely design precatalysts to obtain active sites for the CO2 reduction reaction (CO2 RR). Herein, we develop a strategy based on local sulfur doping of a Cu-based metal-organic framework precatalyst, in which the stable Cu-S motif is dispersed in the framework of HKUST-1 (S-HKUST-1). The precatalyst exhibits a high ethylene selectivity in an H-type cell with a maximum faradaic efficiency (FE) of 60.0 %, and delivers a current density of 400 mA cm-2 with an ethylene FE up to 57.2 % in a flow cell. Operando X-ray absorption results demonstrate that Cuδ+ species stabilized by the Cu-S motif exist in S-HKUST-1 during CO2 RR. Density functional theory calculations indicate the partially oxidized Cuδ+ at the Cu/Cux Sy interface is favorable for coupling of the *CO intermediate due to the modest distance between coupling sites and optimized adsorption energy.