Two-dimensional materials prospects for non-volatile spintronic memories.

Non-volatile magnetic random-access memories (MRAMs), such as spin-transfer torque MRAM and next-generation spin-orbit torque MRAM, are emerging as key to enabling low-power technologies, which are expected to spread over large markets from embedded memories to the Internet of Things. Concurrently, the development and performances of devices based on two-dimensional van der Waals heterostructures bring ultracompact multilayer compounds with unprecedented material-engineering capabilities. Here we provide an overview of the current developments and challenges in regard to MRAM, and then outline the opportunities that can arise by incorporating two-dimensional material technologies. We highlight the fundamental properties of atomically smooth interfaces, the reduced material intermixing, the crystal symmetries and the proximity effects as the key drivers for possible disruptive improvements for MRAM at advanced technology nodes.

Field-free switching of perpendicular magnetization by two-dimensional PtTe2/WTe2 van der Waals heterostructures with high spin Hall conductivity.

The key challenge of spin-orbit torque applications lies in exploring an excellent spin source capable of generating out-of-plane spins while exhibiting high spin Hall conductivity. Here we combine PtTe2 for high spin conductivity and WTe2 for low crystal symmetry to satisfy the above requirements. The PtTe2/WTe2 bilayers exhibit a high in-plane spin Hall conductivity σs,y ≈ 2.32 × 105 × h/2e Ω-1 m-1 and out-of-plane spin Hall conductivity σs,z ≈ 0.25 × 105 × h/2e Ω-1 m-1, where h is the reduced Planck's constant and e is the value of the elementary charge. The out-of-plane spins in PtTe2/WTe2 bilayers enable the deterministic switching of perpendicular magnetization at room temperature without magnetic fields, and the power consumption is 67 times smaller than that of the Pt control case. The high out-of-plane spin Hall conductivity is attributed to the conversion from in-plane spin to out-of-plane spin, induced by the crystal asymmetry of WTe2. Our work establishes a low-power perpendicular magnetization manipulation based on wafer-scale two-dimensional van der Waals heterostructures.

Highly Efficient Spintronic Terahertz Emitter Utilizing a Large Spin Hall Conductivity of Type-II Dirac Semimetal PtTe2.

The remarkable spin-charge interconversion ability of transition metal dichalcogenides (TMDs) makes them promising candidates for spintronic applications. Nevertheless, their potential as spintronic terahertz (THz) emitters (STEs) remains constrained mainly due to their sizable resistivity and low spin Hall conductivity (SHC), which consequently result in modest THz emission. In this work, the TMD PtTe2, a type-II Dirac semimetal is effectively utilized to develop efficient STEs. This high efficiency primarily results from the large SHC of PtTe2, stemming from its low resistivity and significant spin-to-charge conversion efficiency, attributed to surface states and the local Rashba effect in addition to the inverse spin Hall effect. Remarkably, the peak THz emission from PtTe2/Co-STE exceeds that of Pt/Co-STE by ∼15% and is nearly double that of a similarly thick Pt/Co-STE. The efficient THz emission in the PtTe2/Co heterostructure opens new possibilities for utilizing the semimetal TMDs for developing THz emitters.

Field-Free Manipulation of Two-Dimensional Ferromagnet CrTe2 by Spin-Orbit Torques.

Electrical manipulation of magnetic states in two-dimensional ferromagnetic systems is crucial in information storage and low-dimensional spintronics. Spin-orbit torque presents a rapid and energy-efficient method for electrical control of the magnetization. In this letter, we demonstrate a wafer-scale spin-orbit torque switching of two-dimensional ferromagnetic states. Using molecular beam epitaxy, we fabricate two-dimensional heterostructures composed of low crystal-symmetry WTe2 and ferromagnet CrTe2 with perpendicular anisotropy. By utilizing out-of-plane spins generated from WTe2, we achieve field-free switching of the CrTe2 perpendicular magnetization. The threshold switching current density in CrTe2/WTe2 is 1.2 × 106 A/cm2, 20 times smaller than that of the CrTe2/Pt control sample even with an external magnetic field. In addition, the switching behavior can be modulated by external magnetic fields and crystal symmetry. Our findings demonstrate a controllable and all-electric manipulation of perpendicular magnetization in a two-dimensional ferromagnet, representing a significant advancement toward the practical implementation of low-dimensional spintronic devices.

Ferrimagnetic spintronics.

Ferrimagnets composed of multiple and antiferromagnetically coupled magnetic elements have attracted much attention recently as a material platform for spintronics. They offer the combined advantages of both ferromagnets and antiferromagnets, namely the easy control and detection of their net magnetization by an external field, antiferromagnetic-like dynamics faster than ferromagnetic dynamics and the potential for high-density devices. This Review summarizes recent progress in ferrimagnetic spintronics, with particular attention to the most-promising functionalities of ferrimagnets, which include their spin transport, spin texture dynamics and all-optical switching.

Spintronic Integrate-Fire-Reset Neuron with Stochasticity for Neuromorphic Computing.

Spintronics has been recently extended to neuromorphic computing because of its energy efficiency and scalability. However, a biorealistic spintronic neuron with probabilistic "spiking" and a spontaneous reset functionality has not been demonstrated yet. Here, we propose a biorealistic spintronic neuron device based on the heavy metal (HM)/ferromagnet (FM)/antiferromagnet (AFM) spin-orbit torque (SOT) heterostructure. The spintronic neuron can autoreset itself after firing due to the exchange bias of the AFM. The firing process is inherently stochastic because of the competition between the SOT and AFM pinning effects. We also implement a restricted Boltzmann machine (RBM) and stochastic integration multilayer perceptron (SI-MLP) using our proposed neuron. Despite the bit-width limitation, the proposed spintronic model can achieve an accuracy of 97.38% in pattern recognition, which is even higher than the baseline accuracy (96.47%). Our results offer a spintronic device solution to emulate biologically realistic spiking neurons.

Observation of the antiferromagnetic spin Hall effect.

The discovery of the spin Hall effect1 enabled the efficient generation and manipulation of the spin current. More recently, the magnetic spin Hall effect2,3 was observed in non-collinear antiferromagnets, where the spin conservation is broken due to the non-collinear spin configuration. This provides a unique opportunity to control the spin current and relevant device performance with controllable magnetization. Here, we report a magnetic spin Hall effect in a collinear antiferromagnet, Mn2Au. The spin currents are generated at two spin sublattices with broken spatial symmetry, and the antiparallel antiferromagnetic moments play an important role. Therefore, we term this effect the 'antiferromagnetic spin Hall effect'. The out-of-plane spins from the antiferromagnetic spin Hall effect are favourable for the efficient switching of perpendicular magnetized devices, which is required for high-density applications. The antiferromagnetic spin Hall effect adds another twist to the atomic-level control of spin currents via the antiferromagnetic spin structure.

Slippery and Wear-Resistant Surfaces Enabled by Interface Engineered Graphene.

Friction and wear remain the primary cause of mechanical energy dissipation and system failure. Recent studies reveal graphene as a powerful solid lubricant to combat friction and wear. Most of these studies have focused on nanoscale tribology and have been limited to a few specific surfaces. Here, we uncover many unknown aspects of graphene's contact-sliding at micro- and macroscopic tribo-scales over a broader range of surfaces. We discover that graphene's performance reduces for surfaces with increasing roughness. To overcome this, we introduce a new type of graphene/silicon nitride (SiNx, 3 nm) bilayer overcoats that exhibit superior performance compared to native graphene sheets (mono and bilayer), that is, display the lowest microscale friction and wear on a range of tribologically poor flat surfaces. More importantly, two-layer graphene/SiNx bilayer lubricant (<4 nm in total thickness) shows the highest macroscale wear durability on tape-head (topologically variant surface) that exceeds most previous thicker (∼7-100 nm) overcoats. Detailed nanoscale characterization and atomistic simulations explain the origin of the reduced friction and wear arising from these nanoscale coatings. Overall, this study demonstrates that engineered graphene-based coatings can outperform conventional coatings in a number of technologies.

Roadmap of spin-orbit torques.

Spin-orbit torque (SOT) is an emerging technology that enables the efficient manipulation of spintronic devices. The initial processes of interest in SOTs involved electric fields, spin-orbit coupling, conduction electron spins and magnetization. More recently interest has grown to include a variety of other processes that include phonons, magnons, or heat. Over the past decade, many materials have been explored to achieve a larger SOT efficiency. Recently, holistic design to maximize the performance of SOT devices has extended material research from a nonmagnetic layer to a magnetic layer. The rapid development of SOT has spurred a variety of SOT-based applications. In this Roadmap paper, we first review the theories of SOTs by introducing the various mechanisms thought to generate or control SOTs, such as the spin Hall effect, the Rashba-Edelstein effect, the orbital Hall effect, thermal gradients, magnons, and strain effects. Then, we discuss the materials that enable these effects, including metals, metallic alloys, topological insulators, two-dimensional materials, and complex oxides. We also discuss the important roles in SOT devices of different types of magnetic layers, such as magnetic insulators, antiferromagnets, and ferrimagnets. Afterward, we discuss device applications utilizing SOTs. We discuss and compare three-terminal and two-terminal SOT-magnetoresistive random-access memories (MRAMs); we mention various schemes to eliminate the need for an external field. We provide technological application considerations for SOT-MRAM and give perspectives on SOT-based neuromorphic devices and circuits. In addition to SOT-MRAM, we present SOT-based spintronic terahertz generators, nano-oscillators, and domain wall and skyrmion racetrack memories. This paper aims to achieve a comprehensive review of SOT theory, materials, and applications, guiding future SOT development in both the academic and industrial sectors.

Long spin coherence length and bulk-like spin-orbit torque in ferrimagnetic multilayers.

Spintronics relies on magnetization switching through current-induced spin torques. However, because spin transfer torque for ferromagnets is a surface torque, a large switching current is required for a thick, thermally stable ferromagnetic cell, and this remains a fundamental obstacle for high-density non-volatile applications with ferromagnets. Here, we report a long spin coherence length and associated bulk-like torque characteristics in an antiferromagnetically coupled ferrimagnetic multilayer. We find that a transverse spin current can pass through >10-nm-thick ferrimagnetic Co/Tb multilayers, whereas it is entirely absorbed by a 1-nm-thick ferromagnetic Co/Ni multilayer. We also find that the switching efficiency of Co/Tb multilayers partially reflects a bulk-like torque characteristic, as it increases with ferrimagnet thickness up to 8 nm and then decreases, in clear contrast to the 1/thickness dependence of ferromagnetic Co/Ni multilayers. Our results on antiferromagnetically coupled systems will invigorate research towards the development of energy-efficient spintronics.

Bloch Chirality Induced by an Interlayer Dzyaloshinskii-Moriya Interaction in Ferromagnetic Multilayers.

Chiral spin textures stabilized by the interfacial Dzyaloshinkii-Moriya interaction, such as skyrmions and homochiral domain walls, have been shown to exhibit qualities that make them attractive for their incorporation in a variety of spintronic devices. However, for thicker multilayer films, mixed textures occur in which an achiral Bloch component coexists with a chiral Néel component of the domain wall to reduce the demagnetization field at the film surface. We show that an interlayer Dzyaloshinkii-Moriya interaction can break the degeneracy between Bloch chiralities. We further find large population asymmetries and chiral branching in the Bloch component of the domain walls in well-ordered Co/Pd multilayers. This asymmetry is a result of the combined effect of the demagnetization field and an interlayer Dzyaloshinkii-Moriya interaction, and is strongly related to film thickness and structural ordering. This work paves the way toward the utilization of this effect toward controlling Bloch chirality in magnetic multilayers.

Anomalous Photothermoelectric Transport Due to Anisotropic Energy Dispersion in WTe2.

Band structures are vital in determining the electronic properties of materials. Recently, the two-dimensional (2D) semimetallic transition metal tellurides (WTe2 and MoTe2) have sparked broad research interest because of their elliptical or open Fermi surface, making distinct from the conventional 2D materials. In this study, we demonstrate a centrosymmetric photothermoelectric voltage distribution in WTe2 nanoflakes, which has not been observed in common 2D materials such as graphene and MoS2. Our theoretical model shows the anomalous photothermoelectric effect arises from an anisotropic energy dispersion and micrometer-scale hot carrier diffusion length of WTe2. Further, our results are more consistent with the anisotropic tilt direction of energy dispersion being aligned to the b-axis rather than the a-axis of the WTe2 crystal, which is consistent with the previous first-principle calculations as well as magneto-transport experiments. Our work shows the photothermoelectric current is strongly confined to the anisotropic direction of the energy dispersion in WTe2, which opens an avenue for interesting electro-optic applications such as electron beam collimation and electron lenses.

Ferroelectrically tunable magnetic skyrmions in ultrathin oxide heterostructures.

Magnetic skyrmions are topologically protected whirling spin texture. Their nanoscale dimensions, topologically protected stability and solitonic nature, together are promising for future spintronics applications. To translate these compelling features into practical spintronic devices, a key challenge lies in achieving effective control of skyrmion properties, such as size, density and thermodynamic stability. Here, we report the discovery of ferroelectrically tunable skyrmions in ultrathin BaTiO3/SrRuO3 bilayer heterostructures. The ferroelectric proximity effect at the BaTiO3/SrRuO3 heterointerface triggers a sizeable Dzyaloshinskii-Moriya interaction, thus stabilizing robust skyrmions with diameters less than a hundred nanometres. Moreover, by manipulating the ferroelectric polarization of the BaTiO3 layer, we achieve local, switchable and nonvolatile control of both skyrmion density and thermodynamic stability. This ferroelectrically tunable skyrmion system can simultaneously enhance the integratability and addressability of skyrmion-based functional devices.

Quantification of Mixed Bloch-Néel Topological Spin Textures Stabilized by the Dzyaloshinskii-Moriya Interaction in Co/Pd Multilayers.

The three-dimensional structure of nanoscale topological spin textures stabilized by the Dzyaloshinskii-Moriya interaction is governed by the delicate competition between the exchange, demagnetization, and anisotropy energies. The quantification of such spin textures through direct experimental methods is crucial towards understanding the fundamental physics associated with their ordering, as well as their manipulation in spintronic devices. Here, we extend the Lorentz transmission electron microscopy technique to quantify mixed Bloch-Néel chiral spin textures stabilized by the Dzyaloshinskii-Moriya interaction in Co/Pd multilayers. Analysis of the observed intensities under varied imaging conditions coupled to corroborative micromagnetic simulations yields vital parameters that dictate the stability and properties of the complex spin texture, namely, the degree of mixed Bloch-Néel character, the domain wall width, the strength of the Dzyaloshinskii-Moriya interaction, and the exchange stiffness. This approach provides the necessary framework for the application of quantitative Lorentz phase microscopy to a broad array of topological spin systems.

Nonlinear Planar Hall Effect.

An intriguing property of a three-dimensional (3D) topological insulator (TI) is the existence of surface states with spin-momentum locking, which offers a new frontier of exploration in spintronics. Here, we report the observation of a new type of Hall effect in a 3D TI Bi_{2}Se_{3} film. The Hall resistance scales linearly with both the applied electric and magnetic fields and exhibits a π/2 angle offset with respect to its longitudinal counterpart, in contrast to the usual angle offset of π/4 between the linear planar Hall effect and the anisotropic magnetoresistance. This novel nonlinear planar Hall effect originates from the conversion of a nonlinear transverse spin current to a charge current due to the concerted actions of spin-momentum locking and time-reversal symmetry breaking, which also exists in a wide class of noncentrosymmetric materials with a large span of magnitude. It provides a new way to characterize and utilize the nonlinear spin-to-charge conversion in a variety of topological quantum materials.

Field-Free Spin-Orbit Torque Switching from Geometrical Domain-Wall Pinning.

Spin-orbit torques, which utilize spin currents arising from the spin-orbit coupling, offer a novel method for the electrical switching of the magnetization with perpendicular anisotropy. However, the necessity of an external magnetic field to achieve deterministic switching is an obstacle for realizing practical spin-orbit torque devices with all-electric operation. Here, we report field-free spin-orbit torque switching by exploiting the domain-wall motion in an anti-notched microwire with perpendicular anisotropy, which exhibits multidomain states stabilized by the domain-wall surface tension. The combination of spin-orbit torque, Dzyaloshinskii-Moriya interactions, and domain-wall surface-tension-induced geometrical pinning allows the deterministic control of the domain wall and offers a novel method to achieve a field-free spin-orbit torque switching. Our work demonstrates the proof of concept of a perpendicular memory cell that can be readily adopted in three-terminal magnetic memory.

Observation of Out-of-Plane Spin Texture in a SrTiO_{3}(111) Two-Dimensional Electron Gas.

We explore the second order bilinear magnetoelectric resistance (BMER) effect in the d-electron-based two-dimensional electron gas (2DEG) at the SrTiO_{3}(111) surface. We find evidence of a spin-split band structure with the archetypal spin-momentum locking of the Rashba effect for the in-plane component. Under an out-of-plane magnetic field, we find a BMER signal that breaks the sixfold symmetry of the electronic dispersion, which is a fingerprint for the presence of a momentum-dependent out-of-plane spin component. Relativistic electronic structure calculations reproduce this spin texture and indicate that the out-of-plane component is a ubiquitous property of oxide 2DEGs arising from strong crystal field effects. We further show that the BMER response of the SrTiO_{3}(111) 2DEG is tunable and unexpectedly large.

Room-Temperature Giant Charge-to-Spin Conversion at the SrTiO3-LaAlO3 Oxide Interface.

The two-dimensional electron gas (2DEG) formed at the interface between SrTiO3 (STO) and LaAlO3 (LAO) insulating layer is supposed to possess strong Rashba spin-orbit coupling. To date, the inverse Edelstein effect (i.e., spin-to-charge conversion) in the 2DEG layer is reported. However, the direct effect of charge-to-spin conversion, an essential ingredient for spintronic devices in a current-induced spin-orbit torque scheme, has not been demonstrated yet. Here we show, for the first time, a highly efficient spin generation with the efficiency of ∼6.3 in the STO/LAO/CoFeB structure at room temperature by using spin torque ferromagnetic resonance. In addition, we suggest that the spin transmission through the LAO layer at a high temperature range is attributed to the inelastic tunneling via localized states in the LAO band gap. Our findings may lead to potential applications in the oxide insulator based spintronic devices.

Anomalous Current-Induced Spin Torques in Ferrimagnets near Compensation.

While current-induced spin-orbit torques have been extensively studied in ferromagnets and antiferromagnets, ferrimagnets have been less studied. Here we report the presence of enhanced spin-orbit torques resulting from negative exchange interaction in ferrimagnets. The effective field and switching efficiency increase substantially as CoGd approaches its compensation point, giving rise to 9 times larger spin-orbit torques compared to that of a noncompensated one. The macrospin modeling results also support efficient spin-orbit torques in a ferrimagnet. Our results suggest that ferrimagnets near compensation can be a new route for spin-orbit torque applications due to their high thermal stability and easy current-induced switching assisted by negative exchange interaction.

Tunable terahertz reflection of graphene via ionic liquid gating.

We report a highly efficient tunable THz reflector in graphene. By applying a small gate voltage (up to ±3 V), the reflectance of graphene is modulated from a minimum of 0.79% to a maximum of 33.4% using graphene/ionic liquid structures at room temperature, and the reflection tuning is uniform within a wide spectral range (0.1-1.5 THz). Our observation is explained by the Drude model, which describes the THz wave-induced intraband transition in graphene. This tunable reflectance of graphene may contribute to broadband THz mirrors, deformable THz mirrors, variable THz beam splitters and other optical components.