Comparison of bone regenerative capacity of donor-matched human adipose-derived and bone marrow mesenchymal stem cells.

Adipose-derived stem cells (ASC) have been used as an alternative to bone marrow mesenchymal stem cells (BMSC) for bone tissue engineering. However, the efficacy of ASC in bone regeneration in comparison with BMSC remains debatable, since inconsistent results have been reported. Comparing ASC with BMSC obtained from different individuals might contribute to this inconsistency in results. Therefore, this study aimed to compare the bone regenerative capacity of donor-matched human ASC and BMSC seeded onto poly(L-lactide-co-ε-caprolactone) scaffolds using calvarial bone defects in nude rats. First, donor-matched ASC and BMSC were seeded onto the co-polymer scaffolds to evaluate their in vitro osteogenic differentiation. Seeded scaffolds and scaffolds without cells (control) were then implanted in calvarial defects in nude rats. The expression of osteogenesis-related genes was examined after 4 weeks. Cellular activity was investigated after 4 and 12 weeks. Bone formation was evaluated radiographically and histologically after 4, 12, and 24 weeks. In vitro, ASC and BMSC demonstrated mineralization. However, BMSC showed higher alkaline phosphatase activity than ASC. In vivo, human osteogenesis-related genes Runx2 and collagen type I were expressed in defects with scaffold/cells. Defects with scaffold/BMSC had higher cellular activity than defects with scaffold/ASC. Moreover, bone formation in defects with scaffold/BMSC was greater than in defects with scaffold/ASC, especially at the early time-point. These results suggest that although ASC have the potential to regenerate bone, the rate of bone regeneration with ASC may be slower than with BMSC. Accordingly, BMSC are more suitable for bone regenerative applications.

Printability and Critical Insight into Polymer Properties during Direct-Extrusion Based 3D Printing of Medical Grade Polylactide and Copolyesters.

Various 3D printing techniques currently use degradable polymers such as aliphatic polyesters to create well-defined scaffolds. Even though degradable polymers are influenced by the printing process, and this subsequently affects the mechanical properties and degradation profile, degradation of the polymer during the process is not often considered. Degradable scaffolds are today printed and cell-material interactions evaluated without considering the fact that the polymer change while printing the scaffold. Our methodology herein was to vary the printing parameters such as temperature, pressure, and speed to define the relationship between printability, polymer microstructure, composition, degradation profile during the process, and rheological behavior. We used high molecular weight medical-grade (co)polymers, poly(l-lactide-co-ε-caprolactone) (PCLA), poly(l-lactide-co-glycolide) (PLGA), and poly(d,l-lactide-co-glycolide) (PDLGA), with l-lactide content ranging from 25 to 100 mol %, for printing in an extrusion-based printer (3D Bioplotter). Optical microscopy confirmed that the polymers were printable at high resolution and good speed, until a certain degree of degradation. The results show also that printability can not be claimed just by optimizing printing parameters and highlight the importance of a careful analysis of how the polymer's structure and properties vary during printing. The polymers thermally decomposed from the first processing minute and caused a decrease in the average block length of the lactide blocks in the copolymers and generated lower crystallinity. Poly(l-lactide) (PLLA) and PCLA are printable at a higher molecular weight, less degradation before printing was possible, compared to PLGA and PDLGA, a result explained by the higher complex viscosity and more elastic polymeric melt of the copolymer containing glycolide (GA) and lactide (LA). In more detail, copolymers comprised of LA and ε-caprolactone (CL) formed lower molecular weight compounds over the course of printing, while the PLGA copolymer was more susceptible to intermolecular transesterification reactions, which do not affect the overall molecular weight, but cause changes in the copolymer microstructure. This results in a longer printing time for PLGA than PLLA and PCLA.

Yield of household contact investigation of patients with pulmonary tuberculosis in southern Ethiopia.

BACKGROUND: Household Contacts (HHCs) of patients with pulmonary tuberculosis (PTB) have a higher risk of developing TB. Contact investigation is recommended to reach this group and identify undiagnosed cases. In this study, we have determined the yield of contact investigation among HHCs of patients with smear-positive PTB, and estimated TB burden. METHODS: We conducted retrospective record review for the occurrence of TB among HHCs of Index PTB+ cases treated between November 2010 and April 2013 in 12 public health facilities in Boricha district. HHCs were followed up monthly and revisited between March and June 2015. Information on additional TB cases diagnosed and treated among HHCs were documented. HHCs who were diagnosed as having TB after the index cases were diagnosed and treated were considered as 'incident cases'. Presumptive TB case was defined as those having cough for ≥2 weeks or enlarged lymph node. Diagnosis of TB among HHCs were made using smear-microscopy and/or X-rays, and clinically for Extra-pulmonary TB (EPTB). RESULTS: One thousand five hundred and seventeenth HHCs of 344 index cases were visited and screened for TB and followed up for a median of 37 months. 77 (5.1% - 72 with PTB and 5 with EPTB) HHCs developed TB during 4713 person-years of follow-up with an estimated incidence of 1634 (95% CI: 1370-2043) per 100,000 person-years follow-up which is much higher than the estimated TB incidence for the general population in Ethiopia of 210/100,000. Half (41/77) of incident TB cases were diagnosed within the first year of diagnosis of the index cases and 88% (68/77) were adults (Hazard Ratio: 4.03; 95% CI: 2.00-8.12). CONCLUSION: HHCs of index PTB+ cases have high risk of developing active TB. Long term follow-up of HHCs could help improve TB case finding depending on country contexts. Further studies on effectiveness and feasibility of the approach and integration in routine settings are needed.

Factors contributing to drug-resistant tuberculosis treatment outcome in five countries in the Eastern Europe and Central Asia region.

Drug-resistant tuberculosis (DR-TB) is a global challenge and a major contributor of death from anti-microbial resistance. With the main aim to determine factors contributing to treatment outcomes observed among DR-TB patients in the countries in Eastern Europe and Central Asia (EECA), a multi-method study was conducted in: Azerbaijan, Belarus, Romania, Tajikistan and Ukraine. Both quantitative and qualitative methodologies were used for data collection and analysis. The quantitative approaches included a desk review of documents related to the DR-TB responses and an analysis of clinical records of DR-TB patients in selected health facilities of the five countries. Qualitative methods included in-depth interviews with national TB programme (NTP) managers, other healthcare providers and non-governmental organizations (NGOs) workers, as well as interviews and Focus Group Discussions (FGDs) with DR-TB patients. The desk review of 38 reports identified as the main challenges to address DR-TB financial and/or management issues and adverse events of the medicines. The most common recommendations related to treatment outcome focussed on general programme management, treatment regimen composition, clinical management and social support for the patients. In all the five countries the NTPs still have a vertical structure. Some integration into the primary health care system (PHC) already exists but further involvement of PHC facilities is feasible and recommended. Interviews with stakeholders indicated that alcoholism and homelessness and a lack of appropriate response to these issues remain as major challenges for a sub-set of patients. Civil society groups, NGOs and communities are substantially engaged in providing different services to DR-TB patients, especially in Ukraine, Romania and Tajikistan. Data from clinical records of 212 patients revealed that independent risk factors for unfavourable treatment outcome (death, loss to follow-up, failure) were culture-positivity at two months of treatment, history of treatment with second-line drugs and homelessness. More powerful, less toxic and shorter oral treatment regimens as well as comprehensive patient support are needed to improve treatment outcome of patients with DR-TB.

Sub-national prevalence survey of tuberculosis in rural communities of Ethiopia.

BACKGROUND: Tuberculosis is a major public health problem with varying prevalence in different settings. National prevalence surveys provide evidence for planning and decision making. However, they lack the capacity to estimate subnational magnitude that affected the capacity to make selected intervention based on the prevalence. Ethiopia is among high TB burden countries with estimated prevalence of 108 per 100,000 population varying by regions. We aimed to study sub national prevalence of smear-positive TB in rural communities of southern Ethiopia. METHODS: This cross-sectional study, enrolled community members aged over 14 years who had cough of at least two weeks duration. Two sputum samples were collected and examined by using smear microscopy. RESULTS: 38,304 eligible people were enumerated (10,779 from Hadiya, 10,059 from Gurage and 17,466 from Sidama) and indentified 960 presumptive cases. 16, 14 and 14 smear-positive pulmonary TB cases were identified respectively. The point prevalence of smear-positive TB were 148 per 100,000 population (95% CI: 91-241) in Hadiya, 139 per 100,000 population (95% CI: 83-234) in Gurage and 80/100,000 population (95%CI: 48-135) in Sidama zone. Gurage zone had the highest prevalent to notified cases of seven to one. CONCLUSIONS: The prevalence of smear positive TB varies by districts and is high in rural southern Ethiopia compared to the estimated national prevalence. More TB patients remain missed and unreached, impacting negatively on health outcomes. TB case finding approaches should be revisited and innovative approaches and tools to identify missing people with TB should be scaled up.

Evaluation of Apical Dimension, Canal Taper and Maintenance of Root Canal Morphology Using XP-endo Shaper.

AIM: To evaluate the shaping ability of the XP-endo shaper file system in maxillary molars, representing root canals with variation in morphology. MATERIALS AND METHODS: Twenty maxillary molars were instrumented according to recommended protocols. Pre- and postoperative microcomputed tomography (CT) scans were performed and the root canals classified according to canal type and curvature. The volume change, number of strokes needed to prepare the canals and the size of the 0.04-tapered gutta-percha cone that was adapted in the canal were recorded. RESULTS: XP-endo shaper created a significant change in volume after instrumentation in all the canals, with the biggest change found in the DB canals, followed by the MB1 and the P canals, both at full length and in the apical 4 mm. The number of strokes needed to achieve working length and final shape did not differ between the various root canals. Although not significant, the number of strokes needed to prepare the root canal increased with severity of the curvature, but the severity of the curvature did not result in increased removal of dentin in the apical 4 mm. It was possible to achieve a final root canal size where a 0.04-tapered gutta-percha cone could be adapted. CONCLUSION: The XP-endo shaper was a safe and effective instrument to achieve a root canal preparation of at least size 30 and a 0.04 taper. CLINICAL SIGNIFICANCE: The clinical performance of XP-endo shaper was to some extent dependent on preoperative volume and curvature of the root canal.

Coating 3D Printed Polycaprolactone Scaffolds with Nanocellulose Promotes Growth and Differentiation of Mesenchymal Stem Cells.

3D printed polycaprolactone (PCL) has potential as a scaffold for bone tissue engineering, but the hydrophobic surface may hinder optimal cell responses. The surface properties can be improved by coating the scaffold with cellulose nanofibrils material (CNF), a multiscale hydrophilic biocompatible biomaterial derived from wood. In this study, human bone marrow-derived mesenchymal stem cells were cultured on tissue culture plates (TCP) and 3D printed PCL scaffolds coated with CNF. Cellular responses to the surfaces (viability, attachment, proliferation, and osteogenic differentiation) were documented. CNF significantly enhanced the hydrophilic properties of PCL scaffolds and promoted protein adsorption. Live/dead staining and lactate dehydrogenase release assays confirmed that CNF did not inhibit cellular viability. The CNF between the 3D printed PCL strands and pores acted as a hydrophilic barrier, enhancing cell seeding efficiency, and proliferation. CNF supported the formation of a well-organized actin cytoskeleton and cellular production of vinculin protein on the surfaces of TCP and PCL scaffolds. Moreover, CNF-coated surfaces enhanced not only alkaline phosphatase activity, but also collagen Type-I and mineral formation. It is concluded that CNF coating enhances cell attachment, proliferation, and osteogenic differentiation and has the potential to improve the performance of 3D printed PCL scaffolds for bone tissue engineering.

Clinical and molecular response to interferon-α therapy in essential thrombocythemia patients with CALR mutations.

Myeloproliferative neoplasms are clonal disorders characterized by the presence of several gene mutations associated with particular hematologic parameters, clinical evolution, and prognosis. Few therapeutic options are available, among which interferon α (IFNα) presents interesting properties like the ability to induce hematologic responses (HRs) and molecular responses (MRs) in patients with JAK2 mutation. We report on the response to IFNα therapy in a cohort of 31 essential thrombocythemia (ET) patients with CALR mutations (mean follow-up of 11.8 years). HR was achieved in all patients. Median CALR mutant allelic burden (%CALR) significantly decreased from 41% at baseline to 26% after treatment, and 2 patients even achieved complete MR. In contrast, %CALR was not significantly modified in ET patients treated with hydroxyurea or aspirin only. Next-generation sequencing identified additional mutations in 6 patients (affecting TET2, ASXL1, IDH2, and TP53 genes). The presence of additional mutations was associated with poorer MR on CALR mutant clones, with only minor or no MRs in this subset of patients. Analysis of the evolution of the different variant allele frequencies showed that the mutated clones had a differential sensitivity to IFNα in a given patient, but no new mutation emerged during treatment. In all, this study shows that IFNα induces high rates of HRs and MRs in CALR-mutated ET, and that the presence of additional nondriver mutations may influence the MR to therapy.

Digital health for the End TB Strategy: developing priority products and making them work.

In 2014, the World Health Organization (WHO) developed the End TB Strategy in response to a World Health Assembly Resolution requesting Member States to end the worldwide epidemic of tuberculosis (TB) by 2035. For the strategy's objectives to be realised, the next 20 years will need novel solutions to address the challenges posed by TB to health professionals, and to affected people and communities. Information and communication technology presents opportunities for innovative approaches to support TB efforts in patient care, surveillance, programme management and electronic learning. The effective application of digital health products at a large scale and their continued development need the engagement of TB patients and their caregivers, innovators, funders, policy-makers, advocacy groups, and affected communities.In April 2015, WHO established its Global Task Force on Digital Health for TB to advocate and support the development of digital health innovations in global efforts to improve TB care and prevention. We outline the group's approach to stewarding this process in alignment with the three pillars of the End TB Strategy. The supplementary material of this article includes target product profiles, as developed by early 2016, defining nine priority digital health concepts and products that are strategically positioned to enhance TB action at the country level.

Patient and community experiences of tuberculosis diagnosis and care within a community-based intervention in Ethiopia: a qualitative study.

BACKGROUND: The Ethiopian TB control programme relies on passive case finding of TB cases. The predominantly rural-based population in Ethiopia has limited access to health facilities creating barriers to TB services. An intervention package aimed to bring TB diagnosis and treatment services closer to communities has been implemented through partnership with health extension workers (HEWs). They undertook advocacy, communication and social mobilization (ACSM) activities, identified symptomatic individuals, collected sputum, prepared smears and fixed slides at community level. Field supervisors supported HEWs by delivering smeared slides to the laboratory, feeding back results to the HEWs and following up smear-negative cases. Patients diagnosed with TB initiated treatment in the community, they were supported by supervisors and HEWs through the local health post. Case notification increased from 64 to 127/100,000 population/year. METHODS: This qualitative study assessed community members' treatment seeking behaviour and their perceptions of the intervention. In-depth interviews (n=36) were undertaken with participants in six districts. Participants were clients of the community-based intervention, currently on TB treatment or those screened negative for TB. Transcripts were translated to English and a thematic analytical framework was developed guided by the different steps symptomatic individuals take within the intervention package. Coding was done and queries run using NVivo software. RESULTS: Prior to the intervention many patients with chronic cough did not access TB services. Participants described difficulties they faced in accessing district level health facilities that required travel outside their communities. Giving sputum samples and receiving results from within their home communities was appreciated by all participants. The intervention had a high level of acceptability; particularly clear benefits emerged for poor women and men and those too weak to travel. Some participants appeared to prefer a diagnosis of TB, this is likely because receiving a negative smear microscopy result brought further uncertainty and necessitated seeking further investigation. CONCLUSIONS: There is evidence rural populations with high levels of poverty, and in particular women, are at high risk of unmet health needs and undiagnosed TB. Embedding TB services within communities was an acceptable approach for vulnerable groups experiencing poor access to health facilities. In the Ethiopian context this approach can facilitate early diagnosis and improve treatment outcomes.

Exploring providers' perspectives of a community based TB approach in Southern Ethiopia: implication for community based approaches.

BACKGROUND: There is increasing interest in the role of close-to-community providers in supporting universal health coverage, but questions remain about the best approaches to supporting and motivating these providers, and the optimal package they can deliver indifferent contexts and support required. We report on the experiences of different health providers involved in a community based intervention to support access to tuberculosis diagnosis and treatment in Southern Ethiopia. METHODS: The aim of the study is to explore the experiences of health providers in delivering a community-based tuberculosis package in southern Ethiopia and to draw lessons for community-based programmes. A qualitative methodology was used. Methods included in-depth interviews (IDIs, n= 37) with all health provider groups: Community health promoters (CHPs), health extension workers (HEWs), district supervisors and laboratory technicians were undertaken to obtain a detailed understanding of the experiences of providers in the community based tuberculosis package. These were complemented with cadre specific focus group discussions (n= 3). We used the framework approach for qualitative analysis. RESULTS: The key theme that emerged was the positive impact the community-based intervention had on vulnerable groups' access to diagnosis, care and treatment for tuberculosis. Providers found the positive feedback from, and visible impact on, communities very motivating. Other themes related to motivation and performance included supervision and support; learning new skills; team problem solving/ addressing challenges and incentives. Against the backdrop of the Ethiopian Health Extension Programme (HEP), HEWs were successfully able to take on new tasks (collecting sputum and preparing smears) with additional training and appropriate support from supervisors, laboratory technicians and CHPs. CONCLUSION: All categories of providers were motivated by the high visible impact of the community-based intervention on poor and vulnerable communities and households. HEWs role in the community-based intervention was supported and facilitated through the structures and processes established within the community-based intervention and the broader nation-wide Health Extension Programme. Within community based approaches there is need to develop context embedded strategies to support, sustain and motivate this critical cadre who play a pivotal role in linking health systems and rural communities.

Correlation between Ca Release and Osteoconduction by 3D-Printed Hydroxyapatite-Based Templates.

The application of hydroxyapatite (HA)-based templates is quite often seen in bone tissue engineering since that HA is an osteoconductive bioceramic material, which mimics the inorganic component of mineralized tissues. However, the reported osteoconductivity varies in vitro and in vivo, and the levels of calcium (Ca) release most favorable to osteoconduction have yet to be determined. In this study, HA-based templates were fabricated by melt-extrusion 3D-printing and characterized in order to determine a possible correlation between Ca release and osteoconduction. The HA-based templates were blended with poly(lactide-co-trimethylene carbonate) (PLATMC) at three different HA ratios: 10, 30, and 50%. The printability and physical properties of the HA templates were compared with those of pristine PLATMC. In vitro, osteoconductivity was assessed using seeded human bone marrow-derived mesenchymal stem cells. A mild rate of Ca release was observed for HA10 templates, which exhibited higher mineralized extracellular matrix (ECM) secretion than PLATMC at 14 and 21 days. In contrast, the high rate of Ca release exhibited by HA30 and HA50 templates was associated with reduced osteoconduction and impeded mineralized ECM secretion in vitro. Similar results were observed in vivo. In the calvarial defect model in rabbit, PLATMC and HA10 templates exhibited the highest amount of new bone formation, with obvious contact osteogenesis on their surfaces. In contrast, HA30 and HA50 exhibited distant osteogenesis and reduced amounts of new bone ingrowth. It is concluded that HA-based templates are osteoconductive only at low rates of Ca release.

Use of tuberculin skin test, IFN-γ release assays and IFN-γ-induced protein-10 to identify children with TB infection.

Current tests of tuberculosis (TB) infection (tuberculin skin test (TST), interferon (IFN)-γ-release assays (IGRAs) and IFN-γ-induced protein (IP)-10) have limitations and their value when used consecutively to identify infected children has not been explored. This study describes TST, IGRA and IP-10 responses in children in contact with adults with TB, the agreement of the tests and whether using multiple tests indentifies more infected children. 330 children (aged 1-15 yrs) in contact with adults with pulmonary TB and 156 controls were studied in Ethiopia. Children exposed to adults with high bacilli grades in sputum were more likely to have positive TST, IFN-γ and IP-10 than controls. The agreement of positive tests was directly associated with the sputum bacilli grades (p<0.001 for all). The agreement of negative tests was higher in control children. The consecutive use of the tests increased the number of children classified as having at least one positive test. Using three tests increases the number of children classified as infected. This increase is associated with the bacilli load of the adults. Using only one test may underestimate the proportion of infected children, but the interpretation of the data is difficult due to the lack of reference standards.

Perception of consanguineous marriage among the qatari population.

Background: Hereditary blood diseases are widespread among the Arab population due to the high rates of consanguineous marriages; research regarding the perception of consanguineous marriage in some countries, such as Qatar, is extremely scarce. Therefore, this study aimed to investigate the prevalence of consanguineous marriage and assess the perception of consanguineous marriage among the Qatari population. Methods: A cross-sectional study used a self-administered questionnaire among 395 Qatari adults aged 18-35 who attended primary healthcare institutions in Qatar. A convenience sampling technique was used to select the study participants. An independent t-test was used to compare the significance of the mean between the two groups with positive and negative perceptions of consanguineous marriage. Categorical data were analyzed for association using the chi-square or Fisher's exact test. Finally, a multiple logistic regression analysis was conducted to determine the significant predictors of the positive perception of consanguineous marriage. A significant level was set at p < 0.05. Results: Approximately 45% of the participants had a positive perception toward consanguineous marriage, and the most common reason stated by those participants was "habit and traditions." The prevalence of consanguineous marriage among married couples was 62.6%, and among those with consanguineous marriage, most were married to first cousins (81.7%). Moreover, compared to the participants with negative perceptions of consanguineous marriage, those with positive ones were significantly older, married, with lower educational levels and higher monthly income levels, did not hear about glucose-6-phosphate dehydrogenase (G6PD) deficiency, did not know what kinds of diseases are being screened in the premarital test, and were married to a relative. Conclusion: The prevalence of consanguineous marriage is high among the Qatari population, and this requires an immediate need for community-based campaigns to raise public awareness about the problem and its potential impact.

Unique osteogenic profile of bone marrow stem cells stimulated in perfusion bioreactor is Rho-ROCK-mediated contractility dependent.

The fate determination of bone marrow mesenchymal stem/stromal cells (BMSC) is tightly regulated by mechanical cues, including fluid shear stress. Knowledge of mechanobiology in 2D culture has allowed researchers in bone tissue engineering to develop 3D dynamic culture systems with the potential for clinical translation in which the fate and growth of BMSC are mechanically controlled. However, due to the complexity of 3D dynamic cell culture compared to the 2D counterpart, the mechanisms of cell regulation in the dynamic environment remain relatively undescribed. In the present study, we analyzed the cytoskeletal modulation and osteogenic profiles of BMSC under fluid stimuli in a 3D culture condition using a perfusion bioreactor. BMSC subjected to fluid shear stress (mean 1.56 mPa) showed increased actomyosin contractility, accompanied by the upregulation of mechanoreceptors, focal adhesions, and Rho GTPase-mediated signaling molecules. Osteogenic gene expression profiling revealed that fluid shear stress promoted the expression of osteogenic markers differently from chemically induced osteogenesis. Osteogenic marker mRNA expression, type 1 collagen formation, ALP activity, and mineralization were promoted in the dynamic condition, even in the absence of chemical supplementation. The inhibition of cell contractility under flow by Rhosin chloride, Y27632, MLCK inhibitor peptide-18, or Blebbistatin revealed that actomyosin contractility was required for maintaining the proliferative status and mechanically induced osteogenic differentiation in the dynamic culture. The study highlights the cytoskeletal response and unique osteogenic profile of BMSC in this type of dynamic cell culture, stepping toward the clinical translation of mechanically stimulated BMCS for bone regeneration.

Optimization and Validation of a Custom-Designed Perfusion Bioreactor for Bone Tissue Engineering: Flow Assessment and Optimal Culture Environmental Conditions.

Various perfusion bioreactor systems have been designed to improve cell culture with three-dimensional porous scaffolds, and there is some evidence that fluid force improves the osteogenic commitment of the progenitors. However, because of the unique design concept and operational configuration of each study, the experimental setups of perfusion bioreactor systems are not always compatible with other systems. To reconcile results from different systems, the thorough optimization and validation of experimental configuration are required in each system. In this study, optimal experimental conditions for a perfusion bioreactor were explored in three steps. First, an in silico modeling was performed using a scaffold geometry obtained by microCT and an expedient geometry parameterized with porosity and permeability to assess the accuracy of calculated fluid shear stress and computational time. Then, environmental factors for cell culture were optimized, including the volume of the medium, bubble suppression, and medium evaporation. Further, by combining the findings, it was possible to determine the optimal flow rate at which cell growth was supported while osteogenic differentiation was triggered. Here, we demonstrated that fluid shear stress up to 15 mPa was sufficient to induce osteogenesis, but cell growth was severely impacted by the volume of perfused medium, the presence of air bubbles, and medium evaporation, all of which are common concerns in perfusion bioreactor systems. This study emphasizes the necessity of optimization of experimental variables, which may often be underreported or overlooked, and indicates steps which can be taken to address issues common to perfusion bioreactors for bone tissue engineering.

Enhancing Tuberculosis Case-Finding: A Case of Quality Improvement Initiative in Tanzania.

BACKGROUND: Tanzania is 1 of the 30 high TB burden countries and 1 of the 13 countries in which 75% of people with TB are unaccounted for and that is prioritized for the Global Fund Catalytic investment and Strategic Initiative support. Tanzania decided to strengthen its National TB Programme to find these people with TB who are unaccounted for by identifying evidence-driven innovations to deliver high-quality services and to improve the efficiency of TB case-finding. A quality improvement (QI) initiative was implemented by the National Tuberculosis and Leprosy Programme to enhance TB case-finding. The initiative involved identifying gaps in the quality of services, introducing new tools, improving the work capacity of health care workers through training and mentorship sessions, strengthening laboratory and referral services, and implementing mandatory TB screening of all patients attending health facilities. We aimed to assess the effectiveness of QI initiative to enhance TB case-findings at the health facility level. METHOD: A cross-sectional design, and intervention and control facilities randomly selected for an evaluation of the QI initiative were used. Twenty facilities from the Dodoma region across all health care system levels (dispensaries, health centres, and hospitals) were involved in this evaluation. The facilities were randomly divided into either the intervention or control groups at a 1:1 ratio (10 intervention and 10 control facilities). Data routinely collected from program registers from January 2016 to June 2017 were used. RESULT: The evaluation registered a 52% increase in TB case notification in Q1 of 2017 compared with in Q1 of 2016 and, similarly, a 52% increase in Q2 of 2017 compared with in Q2 of 2016, with 9 out of 10 intervention sites reporting increases in their quarterly TB case notifications. There were no positive changes in the 'control facilities' where routine services were provided, with half of the facilities showing a decrease in TB case notification from baseline. CONCLUSION: This QI initiative has the potential to support a long-term comprehensive approach to ending TB and to improve the quality of the foundations of the health care system. This initiative sets a reliable pace for health facilities to efficiently respond to and manage TB case-finding interventions put into action. Tanzania's experience with implementing QI interventions could serve as a model for improving TB case notifications in other settings.

Efficacy of treating segmental bone defects through endochondral ossification: 3D printed designs and bone metabolic activities.

Three-dimensional printing (3D printing) is a promising technique for producing scaffolds for bone tissue engineering applications. Porous scaffolds can be printed directly, and the design, shape and porosity can be controlled. 3D synthetic biodegradable polymeric scaffolds intended for in situ bone regeneration must meet stringent criteria, primarily appropriate mechanical properties, good 3D design, adequate biocompatibility and the ability to enhance bone formation. In this study, healing of critical-sized (5 â€‹mm) femur defects of rats was enhanced by implanting two different designs of 3D printed poly(l-lactide-co-ε-caprolactone) (poly(LA-co-CL)) scaffolds seeded with rat bone marrow mesenchymal stem cells (rBMSC), which had been pre-differentiated in vitro into cartilage-forming chondrocytes. Depending on the design, the scaffolds had an interconnected porous structure of 300-500 â€‹µm and porosity of 50-65%. According to a computational simulation, the internal force distribution was consistent with scaffold designs and comparable between the two designs. Moreover, the defects treated with 3D-printed scaffolds seeded with chondrocyte-like cells exhibited significantly increased bone formation up to 15 weeks compared with empty defects. In all experimental animals, bone metabolic activity was monitored by positron emission tomography 1, 3, 5, 7, 11 and 14 weeks after surgery. This demonstrated a time-dependent relationship between scaffold design and metabolic activity. This confirmed that successful regeneration was highly reproducible. The in vitro and in vivo data indicated that the experimental setups had promising outcomes and could facilitate new bone formation through endochondral ossification.

Hybrid material based on hyaluronan hydrogels and poly(l-lactide-co-1,3-trimethylene carbonate) scaffolds toward a cell-instructive microenvironment with long-term in vivo degradability.

Degradable polyester-based scaffolds are ideal for tissue engineering applications where long-term structural integrity and mechanical support are a requisite. However, their hydrophobic and unfunctionalized surfaces restrain their tissue-mimetic quality. Instead, hyaluronan (HA) hydrogels are able to act as cell-instructive materials with the ability to recapitulate native tissue, although HA is rapidly metabolized in vivo. Taking advantage of these distinctly diverse material properties, a degradable and concurrent hybrid hydrogel material was developed that combines the short-term tissue-relevant properties of bio-orthogonal crosslinked HA with the long-term structural and mechanical support of poly(l-lactide-co-trimethylene carbonate) (PLATMC) scaffolds. This method rendered the formulation of transparent, minimally swelling hydrogel compartments with a desirable cell-instructive "local" elastic modulus within the scaffold matrix without impeding key material properties of PLATMC. Long-term degradability over 180 days in vivo was realized by the integral PLATMC scaffold architecture obtained through either extrusion-based 3D printing or salt-particulate leaching. Intrinsic diffusion capacity within the hydrogel elicited unaffected degradation kinetics of PLATMC in vivo, despite its autocatalytic bulk degradation characteristics displayed when 3D-printed. The effect of the processing method on the material properties of PLATMC markedly extends to its in vivo degradation characteristics, and essential uniform degradation behavior can be advanced using salt-particulate leaching. Regardless of the scaffold fabrication method, the polymer exhibited a soft and flexible nature throughout the degradation period, governed by the rubbery state of the polymer. Our results demonstrate that the physicochemical properties of the hybrid hydrogel scaffold endow it with the potential to act as a cell instructive microenvironment while not affecting key material properties of PLATMC postprocessing. Importantly, the HA hydrogel does not adversely impact the degradation behavior of PLATMC, a vital aspect in the fabrication of tissue engineering constructs. The results presented herein open new avenues for the adoption of concurrent and well-defined tissue-relevant materials exhibiting the potential to recreate microenvironments for cell encapsulation and drug delivery in vivo while providing essential structural integrity and long-term degradability.