Laser-Printed Photoanode: Femtosecond Laser-Induced Crystalline Phase Transformation of WO3 Nanorods for Space-Efficient and Flexible Thin-Film Solar Water-Splitting Cells.

Despite its potential for clean hydrogen harvesting, photoelectrochemical (PEC) water-splitting cells face challenges in commercialization, particularly related its harvesting performance and productivity at an industrial scale. Herein, a facile fabrication method of flexible thin-film photoanode for PEC water-splitting to overcome these limitations, based on laser processing technologies, is proposed. Laser-induced graphene, a carbon structure produced through direct laser writing carbonization (DLWC), plays a dual role: a flexible and stable current collector and a substrate for the hydrothermal synthesis of tungsten trioxide (WO3) nanorods (NRs). To facilitate water-splitting, a femtosecond-pulsed laser (fs laser) is focused on the WO3 NRs, converting their crystalline phase from pristine orthorhombic to monoclinic structure without thermal damage. With NiFe layered double hydroxide (LDH) catalyst, the flexible thin-film photoanode exhibits good PEC performance (1.46 mA cm-2 at 1.23 VRHE) and retains ≈90% of its performance after 3000 bending cycles. With its excellent mechanical properties, the flexible photoanode can be operated in various shapes with different curvatures, enabling space-efficient PEC water-splitting by loading larger photoanode within a given space. This study is expected to contribute to the advancement of large-scale solar water-splitting cells, introducing a new approach to enhance H2/O2 production and expand its application range.

High Efficiency, Transparent, Reusable, and Active PM2.5 Filters by Hierarchical Ag Nanowire Percolation Network.

Air quality has become a major public health issue in Asia including China, Korea, and India. Particulate matters are the major concern in air quality. We present the first environmental application demonstration of Ag nanowire percolation network for a novel, electrical type transparent, reusable, and active PM2.5 air filter although the Ag nanowire percolation network has been studied as a very promising transparent conductor in optoelectronics. Compared with previous particulate matter air filter study using relatively weaker short-range intermolecular force in polar polymeric nanofiber, Ag nanowire percolation network filters use stronger long-range electrostatic force to capture PM2.5, and they are highly efficient (>99.99%), transparent, working on an active mode, low power consumption, antibacterial, and reusable after simple washing. The proposed new particulate matter filter can be applied for a highly efficient, reusable, active and energy efficient filter for wearable electronics application.

Facile fabrication of a superhydrophobic cage by laser direct writing for site-specific colloidal self-assembled photonic crystal.

Micron-sized ablated surface structures with nano-sized 'bumpy' structures were produced by femtosecond (fs) laser ablation of polytetrafluoroethylene (PTFE) film under ambient conditions. Upon just a single step, the processed surface exhibited hierarchical micro/nano morphology. In addition, due to the tribological properties of PTFE, polydimethylsiloxane (PDMS) could be replicated from the laser-ablated PTFE surface without anti-adhesive surface treatment. By controlling the design of the ablated patterns, tunable wettability and superhydrophobicity were achieved on both PTFE and PDMS replica surfaces. Furthermore, using fs laser ablation direct writing, a flexible superhydrophobic PDMS cage formed by superhydrophobic patterns encompassing the unmodified region was demonstrated for aqueous droplet positioning and trapping. Through evaporation-driven colloidal self-assembly in this superhydrophobic cage, a colloidal droplet containing polystyrene (PS) particles dried into a self-assembled photonic crystal, whose optical band gap could be manipulated by the particle size.

Selective Laser Direct Patterning of Silver Nanowire Percolation Network Transparent Conductor for Capacitive Touch Panel.

We introduce a facile method to enhance the functionality of a patterned metallic transparent conductor through selective laser ablation of metal nanowire percolation network. By scanning focused nanosecond pulsed laser on silver nanowire percolation network, silver nanowires are selectively ablated and patterned without using any conventional chemical etching or photolithography steps. Various arbitrary patterns of silver nanowire transparent conductors are readily created on the percolation network by changing various laser parameters such as repetition rate and power. The macroscopic optical and electrical properties of the percolation network transparent conductor can be easily tuned by changing the conductor pattern design via digital selective laser ablation. Further investigation on the silver nanowire based electrode line prepared by the ablation process substantiates that the general relation for a conducting thin film fails at a narrow width, which should be considered for the applications that requires a high resolution patterns. Finally, as a proof of concept, a capacitive touch sensor with diamond patterns has been demonstrated by selective laser ablation of metal nanowire percolation network.

Single nanowire resistive nano-heater for highly localized thermo-chemical reactions: localized hierarchical heterojunction nanowire growth.

A single nanowire resistive nano-heater (RNH) is fabricated, and it is demonstrated that the RNH can induce highly localized temperature fields, which can trigger highly localized thermo-chemical reactions to grow hierarchical nanowires directly at the desired specific spot such as ZnO nanowire branch growth on a single Ag nanowire.

Mussel-inspired resilient hydrogels with strong skin adhesion and high-sensitivity for wearable device.

Stretchable and self-adhesive conductive hydrogels hold significant importance across a wide spectrum of applications, including human-machine interfaces, wearable devices, and soft robotics. However, integrating multiple properties, such as high stretchability, strong interfacial adhesion, self-healing capability, and sensitivity, into a single material poses significant technical challenges. Herein, we present a multifunctional conductive hydrogel based on poly(acrylic acid) (PAA), dopamine-functionalized pectin (PT-DA), polydopamine-coated reduction graphene oxide (rGO-PDA), and Fe3+ as an ionic cross-linker. This hydrogel exhibits a combination of high stretchability (2000%), rapid self-healing (~ 94% recovery in 5 s), and robust self-adhesion to various substrates. Notably, the hydrogel demonstrates a remarkable skin adhesion strength of 85 kPa, surpassing previous skin adhesive hydrogels. Furthermore, incorporating rGO within the hydrogel network creates electric pathways, ensuring excellent conductivity (0.56 S m-1). Consequently, these conductive hydrogels exhibit strain-sensing properties with a significant increase in gauge factor (GF) of 14.6, covering an extensive detection range of ~ 1000%, fast response (198 ms) and exceptional cycle stability. These multifunctional hydrogels can be seamlessly integrated into motion detection sensors capable of distinguishing between various strong or subtle movements of the human body.

Digital selective growth of ZnO nanowire arrays from inkjet-printed nanoparticle seeds on a flexible substrate.

In this article, we introduce fully digital selective ZnO nanowire array growth on inkjet-printed seed patterning. Through proper natural convection suppression during hydrothermal growth, successful ZnO nanowire local growth can be achieved. Without any need for photolithographic processing or stamp preparation, the nanowire growth location can be easily modified when the inkjet printing process is integrated with a CAD (computer-aided design) system to allow a high degree of freedom when the design needs to be changed. The current proposed process is very fast, low-cost, environmentally benign, and low-temperature. Therefore, it can be applied to a flexible plastic substrate and scaled up for larger substrates for mass production or roll-to-roll processing.

Hierarchical weeping willow nano-tree growth and effect of branching on dye-sensitized solar cell efficiency.

In this paper we have demonstrated the simple, low cost, low temperature, hydrothermal growth of weeping willow ZnO nano-trees with very long branches to realize high efficiency dye-sensitized solar cells (DSSCs). We also discuss the effects of branching on solar cell efficiency. By introducing branched growth on the backbone ZnO nanowires (NWs), the short circuit current density and the overall light conversion efficiency of the branched ZnO NW DSSCs increased to almost four times that for vertically grown ZnO NWs. The efficiency increase is attributed to the increase in surface area for higher dye loading and light harvesting and also to reduced charge recombination through direct conduction along the crystalline ZnO branches. As the length of the branches increased, the branches became flaccid and the increase in solar cell efficiency slowed down because the effective surface area increase was hindered by branch bundling during the drying process and subsequent decrease in the dye loading.

Hydrothermal Synthesis in Gap: Conformal Deposition of Textured Hematite Thin Films for Efficient Photoelectrochemical Water Splitting.

Obtaining high performance of hematite (α-Fe2O3) in a photoelectrochemical (PEC) water splitting cell is a challenging task because of its poor electrical conductivity and extremely short carrier lifetime. Here, we introduce a new hydrothermal method, called gap hydrothermal synthesis (GAP-HS), to obtain textured hematite thin films with an outstanding PEC water oxidation performance. GAP-HS proceeds in a precursor-solution-filled narrow gap to induce an anisotropic ion supply. This gives rise to an interesting phenomenon associated with the growth of nanomaterials that reflect the texture of the used substrates. Also, GAP-HS causes the preferential growth of hematite crystal along the [110] direction, leading to improved electrical conductivity within the (001) basal plane. The hematite thin films obtained via GAP-HS exhibit a very high photocurrent of more than 1.3 mA cm-2 at 1.23 V with respect to the reversible hydrogen electrode with 550 °C annealing only. It is the highest photocurrent, to the best of our knowledge, obtained for the hydrothermally synthesized pristine hematite photoanode. Because the low-temperature annealing allows avoiding of substrate deformation, the hematite thin films obtained via GAP-HS are expected to be advantageous for tandem-cell configuration.

Recent progress in controlled nano/micro cracking as an alternative nano-patterning method for functional applications.

Generally, cracking occurs for many reasons connected to uncertainties and to the non-uniformity resulting from intrinsic deficiencies in materials or the non-linearity of applied external (thermal, mechanical, etc.) stresses. However, recently, an increased level of effort has gone into analyzing the phenomenon of cracking and also into methods for controlling it. Sophisticated manipulation of cracking has yielded various cutting-edge technologies such as transparent conductors, mechanical sensors, microfluidics, and energy devices. In this paper, we present some of the recent progress that has been made in controlling cracking by giving an overview of the fabrication methods and working mechanisms used for various mediums. In addition, we discuss recent progress in the various applications of methods that use controlled cracking as an alternative to patterning tools.

Correction: Recent progress in controlled nano/micro cracking as an alternative nano-patterning method for functional applications.

Correction for 'Recent progress in controlled nano/micro cracking as an alternative nano-patterning method for functional applications' by Jinwook Jung et al., Nanoscale Horiz., 2020, DOI: .

Laser-Induced Crystalline-Phase Transformation for Hematite Nanorod Photoelectrochemical Cells.

Generally, a high-temperature postannealing process is required to enhance the photoelectrochemical (PEC) performance of hematite nanorod (NR) photoanodes. However, the thermal annealing time is limited to a short duration as thermal annealing at high temperatures can result in some critical problems, such as conductivity degradation of the fluorine-doped tin oxide film and deformation of the glass substrate. In this study, selective laser processing is introduced for hematite-based PEC cells as an alternative annealing process. The developed laser-induced phase transformation (LIPT) process yields hematite NRs with enhanced optical, chemical, and electrical properties for application in hematite NR-based PEC cells. Owing to its improved properties, the LIPT-processed hematite NR PEC cell exhibits an enhanced water oxidation performance compared to that processed by the conventional annealing process. As the LIPT process is conducted under ambient conditions, it would be an excellent alternative annealing technique for heat-sensitive flexible substrates in the future.

Sensitive Wearable Temperature Sensor with Seamless Monolithic Integration.

Accurate temperature field measurement provides critical information in many scientific problems. Herein, a new paradigm for highly sensitive, flexible, negative temperature coefficient (NTC) thermistor-based artificial skin is reported, with the highest temperature sensing ability reported to date among previously reported NTC thermistors. This artificial skin is achieved through the development of a novel monolithic laser-induced reductive sintering scheme and unique monolithic structures. The unique seamless monolithic structure simultaneously integrates two different components (a metal electrode and metal oxide sensing channel) from the same material at ambient pressure, which cannot be achieved by conventional heterogeneous integration through multiple, complex steps of photolithography or vacuum deposition. In addition to superior performance, electronic skin with high temperature sensitivity can be fabricated on heat-sensitive polymer substrates due to the low-temperature requirements of the process. As a proof of concept, temperature-sensitive artificial skin is tested with conformally attachable physiological temperature sensor arrays in the measurement of the temperatures of exhaled breath for the early detection of pathogenic progression in the respiratory system. The proposed highly sensitive flexible temperature sensor and monolithic selective laser reductive sintering are expected to greatly contribute to the development of essential components in various emerging research fields, including soft robotics and healthcare systems.

Fabrication of Soft Sensor Using Laser Processing Techniques: For the Alternative 3D Printing Process.

Recently, the rapid prototyping process was actively studied in industry and academia. The rapid prototyping process has various advantages such as a rapid processing speed, high processing freedom, high efficiency, and eco-friendly process compared to the conventional etching process. However, in general, it is difficult to directly apply to the fabrication of electric devices, as the molding made by the rapid prototyping process is usually a nonconductive polymer. Even when a conductive material is used for the rapid prototyping process, the molding is made by a single material; thus, its application is limited. In this study, we introduce a simple alternative process for the fabrication of a soft sensor using laser processing techniques. The UV laser curing of polymer resin and laser welding of nanowires are conducted and analyzed. Through the laser processing techniques, we can easily fabricate soft sensors, which is considered an alternative 3D printing process for the fabrication of soft sensors.

Stretchable/flexible silver nanowire Electrodes for energy device applications.

Research on sustainable and high-efficiency energy devices has recently emerged as an important global issue. These devices are now moving beyond the form of a bulk, rigid platform to a portable, flexible/stretchable format that is easily available in our daily lives. Similar to the development of an active layer for the production of next-generation energy devices, the fabrication of flexible/stretchable electrodes for the easy flow of electrons is also very important. Silver nanowire electrodes have high electronic conductivity even in a flexible/stretchable state due to their high aspect ratio and percolation network structures compared to conventional electrodes. Herein, we summarize the research in the field of flexible/stretchable electronics on energy devices fabricated using silver nanowires as the electrodes. Additionally, for a systematic presentation of the current research trends, this review classifies the surveyed research efforts into the categories of energy production, storage, and consumption.

Directional Shape Morphing Transparent Walking Soft Robot.

Transparency in electronics can provide extra functionality and esthetic impression. Transparency plays an important role in accurate soft robot control because one can directly observe target surface condition that is usually blocked by a robot's body. Nowadays, demand for soft actuators has been rapidly increasing because soft robots have attracted much attention recently. However, conventional soft actuators are usually nontransparent with simple isotropic bending, limited performance, and limited functionality. To overcome such limitations of current soft robots, we developed a novel soft shape morphing thin film actuator with new functionalities such as high transparency and unique directional responses to allow complex behavior by integrating a transparent metal nanowire heater. A figure of merit was developed to evaluate the performance and derive an optimum design configuration for the transparent actuator with enhanced performance. As a proof of concept, various transparent soft robots such as transparent gripper, Venus flytrap, and transparent walking robot were demonstrated. Such transparent directional shape morphing actuator is expected to open new application fields and functionalities overcoming limitations of current soft robots.

ZnO/CuO/M (M = Ag, Au) Hierarchical Nanostructure by Successive Photoreduction Process for Solar Hydrogen Generation.

To date, solar energy generation devices have been widely studied to meet a clean and sustainable energy source. Among them, water splitting photoelectrochemical cell is regarded as a promising energy generation way for splitting water molecules and generating hydrogen by sunlight. While many nanostructured metal oxides are considered as a candidate, most of them have an improper bandgap structure lowering energy transition efficiency. Herein, we introduce a novel wet-based, successive photoreduction process that can improve charge transfer efficiency by surface plasmon effect for a solar-driven water splitting device. The proposed process enables to fabricate ZnO/CuO/Ag or ZnO/CuO/Au hierarchical nanostructure, having an enhanced electrical, optical, photoelectrochemical property. The fabricated hierarchical nanostructures are demonstrated as a photocathode in the photoelectrochemical cell and characterized by using various analytic tools.

Single Pass Laser Process for Super-Hydrophobic Flexible Surfaces with Micro/Nano Hierarchical Structures.

Wetting has been studied in various fields: chemical industry, automobile manufacturing, food companies, and even life sciences. In these studies, super-hydrophobic surfaces have been achieved through complex steps and processes. To realize super-hydrophobicity, however, we demonstrated a simple and single pass laser process for the fabrication of micro/nano hierarchical structures on the flexible polytetrafluoroethylene (PTFE, Teflon) surface. The fabricated hierarchical structures helped increase the hydrophobicity by augmenting the surface roughness and promoting air-trapping. In addition, we employed a low-cost and high-throughput replication process producing numerous polydimethylsiloxane (PDMS) replicas from the laser-processed PTFE film. Thanks to the anti-adhesive characteristics of PTFE and the elasticity of PDMS, the structure perfectly transferred to the replica without any mechanical failure. Moreover, our designed mesh patterns offered the possibility of large area applications through varying the process parameters (pitch, beam spot size, laser fluence, and scan speed). Even though mesh patterns had relatively large pitch (190 µm), we were able to achieve high contact angle (>150°). Through pneumatically deformed structure, we clearly showed that the shape of the droplets on our laser-processed super-hydrophobic surface was spherical. Based on these outcomes, we can expect our single laser pulse exposure process can overcome many drawbacks and offer opportunities for advancing applications of the wetting phenomena.

Micropatterning of Metal Nanoparticle Ink by Laser-Induced Thermocapillary Flow.

Selective laser sintering of metal nanoparticle ink is a low-temperature and non-vacuum technique developed for the fabrication of patterned metal layer on arbitrary substrates, but its application to a metal layer composed of large metal area with small voids is very much limited due to the increase in scanning time proportional to the metal pattern density. For the facile manufacturing of such metal layer, we introduce micropatterning of metal nanoparticle ink based on laser-induced thermocapillary flow as a complementary process to the previous selective laser sintering process for metal nanoparticle ink. By harnessing the shear flow of the solvent at large temperature gradient, the metal nanoparticles are selectively pushed away from the scanning path to create metal nanoparticle free trenches. These trenches are confirmed to be stable even after the complete process owing to the presence of the accompanying ridges as well as the bump created along the scanning path. As a representative example of a metal layer with large metal area and small voids, dark-field photomask with Alphabetic letters are firstly created by the proposed method and it is then demonstrated that the corresponding letters can be successfully reproduced on the screen by an achromatic lens.

A Lithography-Free and Field-Programmable Photonic Metacanvas.

The unique correspondence between mathematical operators and photonic elements in wave optics enables quantitative analysis of light manipulation with individual optical devices. Phase-transition materials are able to provide real-time reconfigurability of these devices, which would create new optical functionalities via (re)compilation of photonic operators, as those achieved in other fields such as field-programmable gate arrays (FPGA). Here, by exploiting the hysteretic phase transition of vanadium dioxide, an all-solid, rewritable metacanvas on which nearly arbitrary photonic devices can be rapidly and repeatedly written and erased is presented. The writing is performed with a low-power laser and the entire process stays below 90 °C. Using the metacanvas, dynamic manipulation of optical waves is demonstrated for light propagation, polarization, and reconstruction. The metacanvas supports physical (re)compilation of photonic operators akin to that of FPGA, opening up possibilities where photonic elements can be field programmed to deliver complex, system-level functionalities.