RESUMEN
Thermal insulation under extreme conditions requires materials that can withstand complex thermomechanical stress and retain excellent thermal insulation properties at temperatures exceeding 1,000 degrees Celsius1-3. Ceramic aerogels are attractive thermal insulating materials; however, at very high temperatures, they often show considerably increased thermal conductivity and limited thermomechanical stability that can lead to catastrophic failure4-6. Here we report a multiscale design of hypocrystalline zircon nanofibrous aerogels with a zig-zag architecture that leads to exceptional thermomechanical stability and ultralow thermal conductivity at high temperatures. The aerogels show a near-zero Poisson's ratio (3.3 × 10-4) and a near-zero thermal expansion coefficient (1.2 × 10-7 per degree Celsius), which ensures excellent structural flexibility and thermomechanical properties. They show high thermal stability with ultralow strength degradation (less than 1 per cent) after sharp thermal shocks, and a high working temperature (up to 1,300 degrees Celsius). By deliberately entrapping residue carbon species in the constituent hypocrystalline zircon fibres, we substantially reduce the thermal radiation heat transfer and achieve one of the lowest high-temperature thermal conductivities among ceramic aerogels so far-104 milliwatts per metre per kelvin at 1,000 degrees Celsius. The combined thermomechanical and thermal insulating properties offer an attractive material system for robust thermal insulation under extreme conditions.
RESUMEN
Wide Swath and High Resolution Airborne Pushbroom Hyperspectral Imager (WiSHiRaPHI) is the new-generation airborne hyperspectral imager instrument of China, aimed at acquiring accurate spectral curve of target on the ground with both high spatial resolution and high spectral resolution. The spectral sampling interval of WiSHiRaPHI is 2.4 nm and the spectral resolution is 3.5 nm (FWHM), integrating 256 channels coving from 400 nm to 1000 nm. The instrument has a 40-degree field of view (FOV), 0.125 mrad instantaneous field of view (IFOV) and can work in high spectral resolution mode, high spatial resolution mode and high sensitivity mode for different applications, which can adapt to the Velocity to Height Ratio (VHR) lower than 0.04. The integration has been finished, and several airborne flight validation experiments have been conducted. The results showed the system's excellent performance and high efficiency.
RESUMEN
PURPOSE: Hematologic toxicities (HTs) are among the most common toxicities of combined immunotherapy and radiation therapy (RT). It remains essential to prevent RT-induced HTs because they can cause treatment discontinuation (influencing antitumoral effects) and because lymphopenia might dampen the effects of immunotherapy. To date, there are no studies examining the effect of thoracic vertebral body (TVB) RT dose on HTs in patients with non-small cell lung cancer receiving combined lung RT and programmed cell death (ligand) 1 immunotherapy. METHODS AND MATERIALS: For standardization, all doses were reported as 2-Gy equivalents (EQD2). Mirroring publications before the immunotherapy era, TVB volumes referred to T1-T10, and specific dosimetric parameters (DmeanEQD2, V5EQD2-V60EQD2) were analyzed. Logistic regression estimated associations between grade ≥3 HTs (HT3+) and dosimetric/clinical parameters. Normal tissue complication probability (NTCP) models were constructed by logistic regression analysis modeling for HT3+. Receiver operating characteristic (ROC) analysis delineated TVB dosimetric thresholds, the stratification of which was able to evaluate post-RT absolute lymphocyte count and immunotherapy responses. Areas under the curve (AUCs) for NTCP models were corroborated by bootstrapping (optimism-corrected) methodology. RESULTS: In 132 patients, there were 26 (19.7%) instances of HT3+. On multivariate analysis, DmeanEQD2 and V5EQD2 to V20EQD2 were associated with HT3+ (P < .05 for all). The NTCP models illustrated a 50% probability of HT3+ at a DmeanEQD2 = 39.8 Gy, V5EQD2 = 87.4%, V10EQD2 = 77.0%, and V20EQD2 = 68.4%. ROC analysis delineated optimal thresholds of HT3+ with DmeanEQD2 ± 30.2 Gy, V5EQD2 ± 69.1%, V10EQD2 ± 64.6%, and V20EQD2 ± 53.5%. Patients treated with values above those cutoffs had over double the risk of HT3+, with significant differences in post-RT absolute lymphocyte count and immunotherapy responses (P < .05 for all). AUCs for each individual parameter ranged from 0.743 to 0.798, and combining all 4 aforementioned cutoffs into a ROC curve resulted in a qualitatively higher AUC (0.836). CONCLUSIONS: This hypothesis-generating work suggests that TVB dosimetry may equate with HT3+ in patients with non-small cell lung cancer undergoing combined lung RT/immunotherapy. Applying TVB dose constraints in this population could reduce HT3+ and avoid dampening of immunotherapy responses, but prospective validation is required.
Asunto(s)
Carcinoma de Pulmón de Células no Pequeñas , Neoplasias Pulmonares , Humanos , Carcinoma de Pulmón de Células no Pequeñas/radioterapia , Neoplasias Pulmonares/radioterapia , Cuerpo Vertebral , Inmunoterapia/métodos , Pulmón , Estudios Retrospectivos , Dosificación RadioterapéuticaRESUMEN
Inorganic aerogels have exhibited many superior characteristics with extensive applications, but are still plagued by a nearly century-old tradeoff between their mechanical and thermal properties. When reducing thermal conductivity by ultralow density, inorganic aerogels generally suffer from large fragility due to their brittle nature or weak joint crosslinking, while enhancing the mechanical robustness by material design and structural engineering, they easily sacrifice thermal insulation and stability. Here, we report a chemically bonded multi-nanolayer design and synthesis of a graphene/amorphous boron nitride aerogel to address this typical tradeoff to further enhance mechanical and thermal properties. Attributed to the chemically bonded interface and coupled toughening effect, our aerogels display a low density of 0.8 mg cm-3 with ultrahigh flexibility (elastic compressive strain up to 99% and bending strain up to 90%), and exceptional thermostability (strength degradation <3% after sharp thermal shocks), as well as the lowest thermal conductivities in a vacuum (only 1.57 mW m-1 K-1 at room temperature and 10.39 mW m-1 K-1 at 500°C) among solid materials to date. This unique combination of mechanical and thermal properties offers an attractive material system for thermal superinsulation at extreme conditions.