Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 33
Filtrar
1.
Chem Rev ; 121(1): 506-561, 2021 01 13.
Artículo en Inglés | MEDLINE | ID: mdl-32469528

RESUMEN

Thermal C-C bond cleavage reactions allow the construction of structurally diverse molecular skeletons via predictable and efficient bond reorganizations. Visible light photoredox-catalyzed radical-mediated C-C bond cleavage reactions have recently emerged as a powerful alternative method for overcoming the thermodynamic and kinetic barrier of C-C bond cleavage in diverse molecular scaffolds. In recent years, a plethora of elegant and useful reactions have been invented, and the products are sometimes otherwise inaccessible by classic thermal reactions. Considering the great influence and synthetic potential of these reactions, we provide a summary of the state of art visible light-driven radical-mediated C-C bond cleavage/functionalization strategies with a specific emphasis on the working models. We hoped that this review will be useful for medicinal and synthetic organic chemists and will inspire further reaction development in this interesting area.

2.
Int J Mol Sci ; 24(4)2023 Feb 16.
Artículo en Inglés | MEDLINE | ID: mdl-36835373

RESUMEN

The SPIRAL1 (SPR1) gene family encodes microtubule-associated proteins that are essential for the anisotropic growth of plant cells and abiotic stress resistance. Currently, little is known about the characteristics and roles of the gene family outside of Arabidopsis thaliana. This study intended to investigate the SPR1 gene family in legumes. In contrast to that of A. thaliana, the gene family has undergone shrinking in the model legume species Medicago truncatula and Glycine max. While the orthologues of SPR1 were lost, very few SPR1-Like (SP1L) genes were identified given the genome size of the two species. Specifically, the M. truncatula and G. max genomes only harbor two MtSP1L and eight GmSP1L genes, respectively. Multiple sequence alignment showed that all these members contain conserved N- and C-terminal regions. Phylogenetic analysis clustered the legume SP1L proteins into three clades. The SP1L genes showed similar exon-intron organizations and similar architectures in their conserved motifs. Many essential cis-elements are present in the promoter regions of the MtSP1L and GmSP1L genes associated with growth and development, plant hormones, light, and stress. The expression analysis revealed that clade 1 and clade 2 SP1L genes have relatively high expression in all tested tissues in Medicago and soybean, suggesting their function in plant growth and development. MtSP1L-2, as well as clade 1 and clade 2 GmSP1L genes, display a light-dependent expression pattern. The SP1L genes in clade 2 (MtSP1L-2, GmSP1L-3, and GmSP1L-4) were significantly induced by sodium chloride treatment, suggesting a potential role in the salt-stress response. Our research provides essential information for the functional studies of SP1L genes in legume species in the future.


Asunto(s)
Glycine max , Medicago truncatula , Proteínas Asociadas a Microtúbulos , Arabidopsis/genética , Proteínas de Arabidopsis/genética , Regulación de la Expresión Génica de las Plantas , Genoma de Planta , Medicago truncatula/clasificación , Medicago truncatula/genética , Proteínas Asociadas a Microtúbulos/genética , Familia de Multigenes , Filogenia , Proteínas de Plantas/genética , Glycine max/clasificación , Glycine max/genética , Verduras/metabolismo
3.
Angew Chem Int Ed Engl ; 62(48): e202310288, 2023 Nov 27.
Artículo en Inglés | MEDLINE | ID: mdl-37812525

RESUMEN

α-Trifluoromethylated ketones have attracted significant attention as valuable building blocks in organic synthesis. Such compounds are generally accessed through trifluoromethylation of ketones. Here we report an alternative disconnection approach for the construction of α-CF3 carbonyl compounds by using aroyl fluorides as bifunctional reagents for fluoroaroylation of gem-difluoroalkenes through cooperative photoredox and N-heterocyclic carbene (NHC) catalysis. This strategy bypasses the use of expensive or sensitive trifluoromethylation reagents and/or the requirement for ketone pre-functionalization, thus enabling an efficient and general synthetic method to access α-CF3 -substituted ketones. A wide variety of gem-difluoroalkenes and aroyl fluorides bearing a diverse set of functional groups are eligible substrates. Notably, the developed methodology also provides rapid access to mono- or difluoroalkyl ketones. Mechanistic studies reveal that merging photoredox catalysis with NHC catalysis is essential for the reaction.

4.
Angew Chem Int Ed Engl ; 62(27): e202303222, 2023 Jul 03.
Artículo en Inglés | MEDLINE | ID: mdl-37093153

RESUMEN

The Friedel-Crafts acylation reaction, which belongs to the class of electrophilic aromatic substitutions is a highly valuable and versatile reaction in synthesis. Regioselectivity is predictable and determined by electronic as well as steric factors of the (hetero)arene substrate. Herein, a radical approach for the acylation of arenes and heteroarenes is presented. C-H acylation is achieved through mild cooperative photoredox/NHC radical catalysis with the cross-coupling of an arene radical cation with an NHC-bound ketyl radical as a key step. As compared to the classical Friedel-Crafts acylation, a regiodivergent outcome is observed upon switching from the ionic to the radical mode. In these divergent reactions, aroyl fluorides act as the acylation reagents in both the ionic as well as the radical process.

5.
J Am Chem Soc ; 144(16): 7072-7079, 2022 04 27.
Artículo en Inglés | MEDLINE | ID: mdl-35315651

RESUMEN

The 2,3-dihydrobenzofuran scaffold is widely found in natural products and biologically active compounds. Herein, dearomatizing 2,3-fluoroaroylation of benzofurans with aroyl fluorides as bifunctional reagents to access 2,3-difunctionalized dihydrobenzofurans is reported. The reaction that occurs by cooperative NHC/photoredox catalysis provides 3-aroyl-2-fluoro-2,3-dihydrobenzofurans with moderate to good yield and high diastereoselectivity. Cascades proceed via radical/radical cross-coupling of a benzofuran radical cation generated in the photoredox catalysis cycle with a neutral ketyl radical formed through the NHC catalysis cycle. The redox-neutral transformation exhibits broad substrate scope and high functional group compatibility. With anhydrides as bifunctional reagents, dearomatizing aroyloxyacylation of benzofurans is achieved and the strategy can also be applied to N-acylated indoles to afford 3-aroyl-2-fluoro-dihydroindoles.


Asunto(s)
Benzofuranos , Fluoruros , Benzofuranos/química , Catálisis , Reactivos de Enlaces Cruzados , Oxidación-Reducción
6.
J Am Chem Soc ; 144(17): 7815-7821, 2022 May 04.
Artículo en Inglés | MEDLINE | ID: mdl-35438485

RESUMEN

Boroles and borapyramidanes are classical and nonclassical constitutional isomers, respectively. It is here shown that they can indeed be interconverted. Treatment of the bis(alkynyl)B(C6F5) SMe2 adduct 3·SMe2 with HB(C6F5)2 gave borole 1·SMe2, featuring trimethylsilyl substituents in both α positions to boron, by means of a 1,1-hydroboration/alkenylboration sequence. Photolysis of the classical borole adduct 1·SMe2 resulted in rearrangement to its nonclassical structural isomer, borapyramidane 2, in high yield, which exhibits a vicinal pair of trimethylsilyl substituents at the square pyramidane base. Neutral borapyramidane 2 is a rare example of an isoster of the (CH)5+ pyramidane cation. Thermolysis of borapyramidane 2 in the presence of SMe2 at 60 °C re-formed borole 1·SMe2, which converted at 100 °C to 2,3-bis-silyl-substituted borole isomer 8·SMe2. Its photolysis also gave borapyramidane 2. Prolonged photolysis of 2 at elevated temperatures converted this to borapyramidane isomer 10 containing a pair of trimethylsilyl groups in 1,3-position at its square C4-pyramidal base. The borole and borapyramidane isomers were characterized by X-ray diffraction, and the system was analyzed by density functional theory (DFT) calculations.

7.
Acc Chem Res ; 53(5): 1066-1083, 2020 05 19.
Artículo en Inglés | MEDLINE | ID: mdl-32286794

RESUMEN

Nitrogen-centered radicals (NCRs) are a versatile class of highly reactive species that have a longer history than the classical carbon-based radicals in synthetic chemistry. Depending on the N-hybridization and substitution patterns, NCRs can serve as electrophiles or nucleophiles to undergo various radical transformations. Despite their power, progress in nitrogen-radical chemistry is still slow compared with the popularity of carbon radicals, and their considerable synthetic potential has been largely underexplored, which is, as concluded by Zard, mainly hampered by "a dearth of convenient access to these species and a lack of awareness pertaining to their reactivity".Over the past decade, visible-light photoredox catalysis has been established as a powerful toolbox that synthetic chemists can use to generate a diverse range of radical intermediates from native organic functional groups via a single electron transfer process or energy transfer under mild reaction conditions. This catalytic strategy typically obviates the need for external stoichiometric activation reagents or toxic initiators and often enables traditionally inaccessible ionic chemical reactions. On the basis of our long-standing interest in nitrogen chemistry and catalysis, we have emphasized the use of visible-light photoredox catalysis as a tactic to discover and develop novel methods for generating NCRs in a controlled fashion and synthetic applications. In this Account, we describe our recent advances in the development of visible-light-driven photoredox-catalyzed generation of NCRs and their synthetic applications.Inspired by the natural biological proton-coupled electron transfer (PCET) process, we first developed a strategy of visible-light-driven photoredox-catalyzed oxidative deprotonation electron transfer to activate the N-H bonds of hydrazones, benzamides, and sulfonamides to give the corresponding NCRs under mild reaction conditions. With these reactive species, we then achieved a range of 5-exo and 6-endo radical cyclizations as well as cascade reactions in a highly regioselective manner, providing access to a variety of potentially useful nitrogen heterocycles. To further expand the repertoire of possible reactions of NCRs, we also revealed that iminyl radicals, derived from O-acyl cycloalkanone oxime esters, can undergo facile ring-opening C-C bond cleavage to give cyanoalkyl radicals. These newly formed radical species can further undergo a variety of C-C bond-forming reactions to allow the synthesis of diverse distally functionalized alkyl nitriles. Stimulated by these studies, we further developed a wide variety of visible-light-driven copper-catalyzed radical cross-coupling reactions of cyanoalkyl radicals. Because of their inherent highly reactive and transient properties, the strategy of heteroatom-centered radical catalysis is still largely underexplored in organic synthesis. Building on our understanding of the fundamental chemistry of NCRs, we also developed for the first time the concept of NCR covalent catalysis, which involves the use of in situ-photogenerated NCRs to activate allyl sulfones, vinylcyclopropanes, and N-tosyl vinylaziridines. This catalytic strategy has thus enabled efficient difunctionalization of various alkenes and late-stage modification of complex biologically active molecules.In this Account, we describe a panoramic picture of our recent contributions since 2014 to the development and application of the visible-light-driven photoredox systems in the field of NCR chemistry. These studies provide not only efficient methods for the synthesis of functionally rich molecules but also some insight into the exploration of new reactivity or reaction modes of NCRs.

8.
Angew Chem Int Ed Engl ; 60(2): 675-679, 2021 Jan 11.
Artículo en Inglés | MEDLINE | ID: mdl-32929798

RESUMEN

Oligosilanes are of great interest in the fields of organic photonics and electronics. In this communication, a highly efficient visible-light-mediated hydrosilylation of electron-deficient alkenes through cleavage of a trimethylsilyl-polysilanyl Si-Si bond is explored. These reactions smoothly occur on readily available organo(tristrimethylsilyl)silanes and other oligosilanes in the presence of an IrIII -based photo-redox catalyst under visible light irradiation. Silyl radicals are generated through single electron oxidation of the oligosilane assisted by the solvent. The introduced method exhibits broad substrate scope and high functional group tolerance with respect to the organo(tristrimethylsilyl)silane and alkene components, enabling the construction of functionalized trisilanes. In addition, this catalytic system can be also applied to highly strained bicyclo[1.1.0]butanes as silyl radical acceptors.

9.
Angew Chem Int Ed Engl ; 60(26): 14399-14404, 2021 Jun 21.
Artículo en Inglés | MEDLINE | ID: mdl-33871137

RESUMEN

A three-component 1,2-aminoarylation of vinyl ethers, enamides, ene-carbamates and vinyl thioethers by synergistic photoredox and nickel catalysis is reported. 2,2,2-Trifluoroethoxy carbonyl protected α-amino-oxy acids are used as amidyl radical precursors. anti-Markovnikov addition of the amidyl radical to the alkene and Ni-mediated radical/transition metal cross over lead to the corresponding 1,2-aminoarylation product. The radical cascade, which can be conducted under practical and mild conditions, features high functional group tolerance and broad substrate scope. Stereoselective 1,2-aminoarylation is achieved using a L-(+)-lactic acid derived vinyl ether as the substrate, offering a novel route for the preparation of protected enantiopure α-arylated ß-amino alcohols. In addition, 1,2-aminoacylation of vinyl ethers is achieved by using an acyl succinimide as the electrophile for the Ni-mediated radical coupling.

10.
Angew Chem Int Ed Engl ; 60(43): 23335-23341, 2021 10 18.
Artículo en Inglés | MEDLINE | ID: mdl-34432353

RESUMEN

α-Aminosilanes are an important class of organic compounds that show biological activity. In this communication, a new approach to α-aminosilanes that utilizes photoredox catalysis to enable three-component coupling of organo(tristrimethylsilyl)silanes with feedstock alkylamines and aldehydes is presented. A wide range of highly functionalized α-aminosilanes can be obtained in good yields under mild conditions. Both primary amines and secondary amines are compatible with this transformation. Moreover, optically pure α-aminosilanes are accessible by using chiral amines. Mechanistic studies indicate that reactions proceed through radical/radical cross-coupling of silyl radicals with α-amino alkyl radicals.

11.
Chemistry ; 25(34): 8024-8029, 2019 Jun 18.
Artículo en Inglés | MEDLINE | ID: mdl-30980437

RESUMEN

Alkene bifunctionalizations are powerful tools for the rapid construction of structurally complex and valuable scaffolds, and such reactions typically involve the use of transition-metal catalysts or organocatalysts. Here, we report for the first time a photogenerated neutral nitrogen radical catalyzed intermolecular alkene bifunctionalization by using allyl sulfones as the source of both the carbon and the sulfone functionalities under mild conditions. The key to the success of this protocol involves the visible-light-mediated photocatalytic in situ generation of a nitrogen-centered radical from the N-(2-acetylphenyl) benzenesulfonamide catalyst, and its activation of the allyl sulfones to generate reactive species. The preliminary control experiments supported the postulated mechanism.

12.
Angew Chem Int Ed Engl ; 57(47): 15505-15509, 2018 Nov 19.
Artículo en Inglés | MEDLINE | ID: mdl-30295976

RESUMEN

A visible-light-driven, copper-catalyzed three-component radical cross-coupling of oxime esters, styrenes, and boronic acids has been developed. Key steps of this protocol involve catalytic generation of an iminyl radical from a redox-active oxime ester and subsequent C-C bond cleavage to generate a cyanoalkyl radical. Upon its addition to styrene, the newly formed benzylic radical undergoes coupling with a boronic-acid-derived ArCuII complex to achieve 1,1-diarylmethane-containing alkylnitriles.

13.
Angew Chem Int Ed Engl ; 57(3): 738-743, 2018 01 15.
Artículo en Inglés | MEDLINE | ID: mdl-29214705

RESUMEN

A room-temperature, visible-light-driven N-centered iminyl radical-mediated and redox-neutral C-C single bond cleavage/radical addition cascade reaction of oxime esters and unsaturated systems has been accomplished. The strategy tolerates a wide range of O-acyl oximes and unsaturated systems, such as alkenes, silyl enol ethers, alkynes, and isonitrile, enabling highly selective formation of various chemical bonds. This method thus provides an efficient approach to various diversely substituted cyano-containing alkenes, ketones, carbocycles, and heterocycles.

14.
Angew Chem Int Ed Engl ; 56(32): 9527-9531, 2017 08 01.
Artículo en Inglés | MEDLINE | ID: mdl-28636809

RESUMEN

A visible-light-driven radical-mediated strategy for the in situ generation of aza-ortho-quinone methides from 2-vinyl-substituted anilines and alkyl radical precursors is described. This process enables an efficient multicomponent reaction of 2-vinylanilines, halides, and sulfur ylides, and has a wide substrate scope and good functional group tolerance. Treatment of the cycloaddition products with a base leads to densely functionalized indoles in a single-flask operation.

15.
Chemistry ; 22(20): 6774-8, 2016 05 10.
Artículo en Inglés | MEDLINE | ID: mdl-26990670

RESUMEN

A convergent and highly stereoselective [4+2] cycloaddition of in situ-generated ortho-Quinone methides (o-QMs) and azlactone enols has been successfully developed through a triple Brønsted acid catalysis strategy. This protocol provides an efficient and mild access to various densely functionalized dihydrocoumarins bearing adjacent quaternary and tertiary stereogenic centers in high yields with excellent diastereo- and enantioselectivity.

16.
Biofabrication ; 16(3)2024 Apr 12.
Artículo en Inglés | MEDLINE | ID: mdl-38569492

RESUMEN

Tissue engineering has emerged as an advanced strategy to regenerate various tissues using different raw materials, and thus it is desired to develop more approaches to fabricate tissue engineering scaffolds to fit specific yet very useful raw materials such as biodegradable aliphatic polyester like poly (lactide-co-glycolide) (PLGA). Herein, a technique of 'wet 3D printing' was developed based on a pneumatic extrusion three-dimensional (3D) printer after we introduced a solidification bath into a 3D printing system to fabricate porous scaffolds. The room-temperature deposition modeling of polymeric solutions enabled by our wet 3D printing method is particularly meaningful for aliphatic polyester, which otherwise degrades at high temperature in classic fuse deposition modeling. As demonstration, we fabricated a bilayered porous scaffold consisted of PLGA and its mixture with hydroxyapatite for regeneration of articular cartilage and subchondral bone. Long-termin vitroandin vivodegradation tests of the scaffolds were carried out up to 36 weeks, which support the three-stage degradation process of the polyester porous scaffold and suggest faster degradationin vivothanin vitro. Animal experiments in a rabbit model of articular cartilage injury were conducted. The efficacy of the scaffolds in cartilage regeneration was verified through histological analysis, micro-computed tomography (CT) and biomechanical tests, and the influence of scaffold structures (bilayerversussingle layer) onin vivotissue regeneration was examined. This study has illustrated that the wet 3D printing is an alternative approach to biofabricate tissue engineering porous scaffolds based on biodegradable polymers.


Asunto(s)
Cartílago Articular , Animales , Conejos , Porosidad , Microtomografía por Rayos X , Temperatura , Andamios del Tejido/química , Ingeniería de Tejidos/métodos , Polímeros , Poliésteres , Impresión Tridimensional
17.
Adv Healthc Mater ; 13(16): e2303395, 2024 06.
Artículo en Inglés | MEDLINE | ID: mdl-38554036

RESUMEN

In the last 30 years, there are ≈60 000 publications about electrospun nanofibers, but it is still unclear whether nanoscale fibers are really necessary for electrospun tissue engineering scaffolds. The present report puts forward this argument and reveals that compared with electrospun nanofibers, microfibers with diameter of ≈3 µm (named as "oligo-micro fiber") are more appropriate for tissue engineering scaffolds owing to their better cell infiltration ability caused by larger pores with available nuclear deformation. To further increase pore sizes, electrospun poly(ε-caprolactone) (PCL) scaffolds are fabricated using latticed collectors with meshes. Fiber orientation leads to sufficient mechanical strength albeit increases porosity. The latticed scaffolds exhibit good biocompatibility and improve cell infiltration. Under aortic conditions in vitro, the performances of latticed scaffolds are satisfactory in terms of the acute systolic hemodynamic functionality, except for the higher regurgitation fraction caused by the enlarged pores. This hierarchical electrospun scaffold with sparse fibers in macropores and oligo-micro fibers in filaments provides new insights into the design of tissue engineering scaffolds, and tissue engineering may provide living heart valves with regenerative capabilities for patients with severe valve disease in the future.


Asunto(s)
Nanofibras , Poliésteres , Ingeniería de Tejidos , Andamios del Tejido , Ingeniería de Tejidos/métodos , Andamios del Tejido/química , Nanofibras/química , Poliésteres/química , Animales , Humanos , Válvulas Cardíacas/fisiología , Porosidad , Prótesis Valvulares Cardíacas , Materiales Biocompatibles/química
18.
Regen Biomater ; 10: rbad035, 2023.
Artículo en Inglés | MEDLINE | ID: mdl-37206162

RESUMEN

Magnetic resonance imaging (MRI) is a promising non-invasive method to assess cartilage regeneration based on the quantitative relationship between MRI features and concentrations of the major components in the extracellular matrix (ECM). To this end, in vitro experiments are performed to investigate the relationship and reveal the underlying mechanism. A series of collagen (COL) and glycosaminoglycan (GAG) solutions at different concentrations are prepared, and T1 and T2 relaxation times are measured with or without a contrast agent (Gd-DTPA2-) by MRI. Fourier transform infrared spectrometry is also used to measure the contents of biomacromolecule-bound water and other water, allowing theoretical derivation of the relationship between biomacromolecules and the resulting T2 values. It has been revealed that the MRI signal in the biomacromolecule aqueous systems is mainly influenced by the protons in hydrogens of biomacromolecule-bound water, which we divide into inner-bound water and outer-bound water. We have also found that COL results in higher sensitivity of bound water than GAG in T2 mapping. Owing to the charge effect, GAG regulates the penetration of the contrast agent during dialysis and has a more significant effect on T1 values than COL. Considering that COL and GAG are the most abundant biomacromolecules in the cartilage, this study is particularly useful for the real-time MRI-guided assessment of cartilage regeneration. A clinical case is reported as an in vivo demonstration, which is consistent with our in vitro results. The established quantitative relation plays a critical academic role in establishing an international standard ISO/TS24560-1:2022 'Clinical evaluation of regenerative knee articular cartilage using delayed gadolinium-enhanced MRI of cartilage (dGEMRIC) and T2 mapping' drafted by us and approved by International Standard Organization.

19.
Regen Biomater ; 10: rbad056, 2023.
Artículo en Inglés | MEDLINE | ID: mdl-37397871

RESUMEN

Expanded polytetrafluoroethylene (ePTFE) is promising in biomedical fields such as covered stents and plastic surgery owing to its excellent biocompatibility and mechanical properties. However, ePTFE material prepared by the traditional biaxial stretching process is with thicker middle and thinner sides due to the bowing effect, which poses a major problem in industrial-scale fabrication. To solve this problem, we design an olive-shaped winding roller to provide the middle part of the ePTFE tape with a greater longitudinal stretching amplitude than the two sides, so as to make up for the excessive longitudinal retraction tendency of the middle part when it is transversely stretched. The as-fabricated ePTFE membrane has, as designed, uniform thickness and node-fibril microstructure. In addition, we examine the effects of mass ratio of lubricant to PTFE powder, biaxial stretching ratio and sintering temperature on the performance of the resultant ePTFE membranes. Particularly, the relation between the internal microstructure of the ePTFE membrane and its mechanical properties is revealed. Besides stable mechanical properties, the sintered ePTFE membrane exhibits satisfactory biological properties. We make a series of biological assessments including in vitro hemolysis, coagulation, bacterial reverse mutation and in vivo thrombosis, intracutaneous reactivity test, pyrogen test and subchronic systemic toxicity test; all of the results meet the relevant international standards. The muscle implantation of the sintered ePTFE membrane into rabbits indicates acceptable inflammatory reactions of our sintered ePTFE membrane fabricated on industrial scale. Such a medical-grade raw material with the unique physical form and condensed-state microstructure is expected to afford an inert biomaterial potentially for stent-graft membrane.

20.
Nat Nanotechnol ; 18(9): 1085-1093, 2023 09.
Artículo en Inglés | MEDLINE | ID: mdl-37142709

RESUMEN

High rates of ligament damage require replacements; however, current synthetic materials have issues with bone integration leading to implant failure. Here we introduce an artificial ligament that has the required mechanical properties and can integrate with the host bone and restore movement in animals. The ligament is assembled from aligned carbon nanotubes formed into hierarchical helical fibres bearing nanometre and micrometre channels. Osseointegration of the artificial ligament is observed in an anterior cruciate ligament replacement model where clinical polymer controls showed bone resorption. A higher pull-out force is found after a 13-week implantation in rabbit and ovine models, and animals can run and jump normally. The long-term safety of the artificial ligament is demonstrated, and the pathways involved in integration are studied.


Asunto(s)
Ligamento Cruzado Anterior , Nanotubos de Carbono , Ovinos , Animales , Conejos , Ligamento Cruzado Anterior/cirugía , Fibra de Carbono , Prótesis e Implantes
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA