RESUMEN
Compositional tunability, an indispensable parameter for modifying the properties of materials, can open up new applications for van der Waals (vdW) layered materials such as transition-metal dichalcogenides (TMDCs). To date, multielement alloy TMDC layers are obtained via exfoliation from bulk polycrystalline powders. Here, we demonstrate direct deposition of high-entropy alloy disulfide, (VNbMoTaW)S2, layers with controllable thicknesses on free-standing graphene membranes and on bare and hBN-covered Al2O3(0001) substrates via ultra-high-vacuum reactive dc magnetron sputtering of the VNbMoTaW target in Kr and H2S gas mixtures. Using a combination of density functional theory calculations, Raman spectroscopy, X-ray diffraction, scanning transmission electron microscopy coupled with energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy, we determine that the as-deposited layers are single-phase, 2H-structured, and 0001-oriented (V0.10Nb0.16Mo0.19Ta0.28W0.27)S2.44. Our synthesis route is general and applicable for heteroepitaxial growth of a wide variety of TMDC alloys and potentially other multielement alloy vdW compounds with the desired compositions.
RESUMEN
We report on a phenomenon, where thin films sputter-deposited on single-crystalline Al2O3(0001) substrates exposed to borazineâa precursor commonly used for the synthesis of hexagonal boron nitride layersâare more highly oriented than those grown on bare Al2O3(0001) under the same conditions. We observed this phenomenon in face-centered cubic Pd, body-centered cubic Mo, and trigonal Ta2C thin films grown on Al2O3(0001). Interestingly, intermittent exposure to borazine during the growth of Ta2C thin films on Ta2C yields better crystallinity than direct deposition of monolithic Ta2C. We attribute these rather unusual results to a combination of both enhanced adatom mobilities on, and epitaxial registry with, surfaces exposed to borazine during the deposition. We expect that our approach can potentially help improve the crystalline quality of thin films deposited on a variety of substrates.
RESUMEN
Refractory high-entropy alloy nitride, (VNbTaMoW)N, layers are grown on single-crystalline MgO(001) via ultrahigh vacuum direct current magnetron sputtering of a VNbTaMoW target in Kr/N2 gas mixtures at 1073 K. X-ray diffraction, scanning and transmission electron microscopy, and energy dispersive X-ray spectroscopy characterizations revealed the formation of B1-structured, 111-textured (V0.21Nb0.18Ta0.19Mo0.21W0.21)N1.05 with lattice parameter a = 0.4249 nm. The alloy nitride film exhibits dense columnar microstructure near the substrate-film interface with coherent 001 grain growth limited to a few tens of nanometers, followed by an outgrowth of quasi one-dimensional nanorods with 3-fold symmetric facets. We attribute the self-organized growth of rather unusual 111-textured nanorods on isostructural MgO(001) to kinetic limitations of the sputter-deposition process exacerbated by the sluggish diffusion of the multicomponent adspecies and the preferential growth of {111} crystals.
RESUMEN
Pd(111) thin films, â¼245 nm thick, are deposited on Al2O3(0001) substrates at ≈0.5Tm, where Tm is the Pd melting point, by ultrahigh vacuum dc magnetron sputtering of Pd target in pure Ar discharges. Auger electron spectra and low-energy electron diffraction patterns acquired in situ from the as-deposited samples reveal that the surfaces are compositionally pure 111-oriented Pd. Double-axis x-ray diffraction (XRD) ω-2θ scans show only the set of Pd 111 peaks from the film. In triple-axis high-resolution XRD, the full width at half maximum intensity Γω of the Pd 111 ω-rocking curve is 630 arc sec. XRD 111 pole figure obtained from the sample revealed six peaks 60°-apart at a tilt angles corresponding to Pd 111 reflections. XRD Ï scans show six 60°-rotated 111 peaks of Pd at the same Ï angles for 11[Formula: see text]3 of Al2O3 based on which the epitaxial crystallographic relationships between the film and the substrate are determined as [Formula: see text]Ç[Formula: see text] with two in-plane orientations of [Formula: see text]Ç[Formula: see text] and [Formula: see text]Ç[Formula: see text]. Using triple axis symmetric and asymmetric reciprocal space maps, interplanar spacings of out-of-plane (111) and in-plane (11[Formula: see text]) are found to be 0.2242 ± 0.0003 and 0.1591 ± 0.0003 nm, respectively. These values are 0.18% lower than 0.2246 nm for (111) and the same, within the measurement uncertainties, as 0.1588 nm for (11[Formula: see text]) calculated from the bulk Pd lattice parameter, suggesting a small out-of-plane compressive strain and an in-plane tensile strain related to the thermal strain upon cooling the sample from the deposition temperature to room temperature. High-resolution cross-sectional transmission electron microscopy coupled with energy dispersive x-ray spectra obtained from the Pd(111)/Al2O3(0001) samples indicate that the Pd-Al2O3 interfaces are essentially atomically abrupt and dislocation-free. These results demonstrate the growth of epitaxial Pd thin films with (111) out-of-plane orientation with low mosaicity on Al2O3(0001).
RESUMEN
We report on the effects of substrate temperature (1073 K ≤ T s ≤ 1373 K) and deposition time t (= 3 ~ 30 min.) on the crystallinity of Ta2C/Al2O3(0001) thin films grown via ultra-high vacuum direct current magnetron sputtering of TaC target in 20 mTorr (2.7 Pa) pure Ar atmospheres. Using X-ray diffraction and transmission electron microscopy, we determine that the layers are 0001-oriented, trigonal-structured α-Ta2C at all T s. With increasing T s, we obtain smoother and thinner layers with enhanced out-of-plane coherency and decreasing unit cell volume. Interestingly, the Ta2C 0001 texture improves with increasing T s up to 1273 K above which the layers are relatively more polycrystalline. At T s = 1373 K, during early stages of deposition, the Ta2C layers grow heteroepitaxially on Al2O3(0001) with ( 0001 ) Ta 2 C â ( 0001 ) Al 2 O 3 and [ 10 1 ¯ 0 ] Ta 2 C â [ 11 2 ¯ 0 ] Al 2 O 3 . With increasing t, we observe the formation of anti-phase domains and misoriented grains resulting in polycrystalline layers. We attribute the observed enhancement in 0001 texture to increased surface adatom mobilities and the development of polycrystallinity to reduced incorporation of C in the lattice with increasing T s. We expect that our results help develop methods for the synthesis of high-quality Ta2C thin films.
RESUMEN
The crystal structure of bulk SrTiO3(STO) transitions from cubic to tetragonal at around 105 K. Recent local scanning probe measurements of LaAlO3/SrTiO3 (LAO/STO) interfaces indicated the existence of spatially inhomogeneous electrical current paths and electrostatic potential associated with the structural domain formation in the tetragonal phase of STO. Here we report a study of temperature dependent electronic transport in combination with the polarized light microscopy of structural domains in mesoscopic LAO/STO devices. By reducing the size of the conductive interface to be comparable to that of a single tetragonal domain of STO, the anisotropy of interfacial electron conduction in relationship to the domain wall and its direction was characterized between T = 10-300 K. It was found that the four-point resistance measured with current parallel to the domain wall is larger than the resistance measured perpendicular to the domain wall. This observation is qualitatively consistent with the current diverting effect from a more conductive domain wall within the sample. Among all the samples studied, the maximum resistance ratio found is at least 10 and could be as large as 105 at T = 10 K. This electronic anisotropy may have implications on other oxide hetero-interfaces and the further understanding of electronic/magnetic phenomena found in LAO/STO.