Adsorption of zwitterionic surfactant on limestone measured with high-performance liquid chromatography: micelle-vesicle influence.

Herein is presented a new methodology to determine the static adsorption of a zwitterionic surfactant on limestone in three different aqueous media [high-performance liquid chromatography (HPLC) water, seawater, and connate water] with the use of HPLC at room temperature and 70 °C. The results showed that, in both HPLC water and seawater, the surfactant adsorption followed a monolayer Langmuir tendency. In contrast, for connate water, the surfactant presented a new adsorption profile, characterized by two regions: (i) At surfactant concentrations below 1500 mg L(-1), an increase of adsorption is observed as the amount of divalent cations increases in the aqueous media. (ii) At surfactant concentrations above 1500 mg L(-1), the adsorption decreases because the equilibrium, monomer ⇆ micelle ⇆ vesicle, is shifted to the formation of vesicles, giving as a result a decrease in the concentration of monomers, thus reducing the interaction between the surfactant and the rock, and therefore, lower adsorption values were obtained. The behavior of the surfactant adsorption under different concentrations of divalent cations was well-described by the use of a new modified Langmuir model: (dΓ/dt)ads = k(ads)c(Γ∞ - Γ) - k(cmc)(c - c(cmc))(n)ΓH(c - c(cmc)). It was also observed that, as the temperature increases, the adsorption is reduced because of the exothermic nature of the adsorption processes.

Quantum molecular design and experimental testing of a high-performance zwitterionic corrosion inhibitor for oxidized iron surfaces.

A zwitterionic-based chemical, the 3,3'-(octadecylamino)dipropionic acid, was quantum-theoretically designed to be applied as a corrosion inhibitor for protecting oxidized iron surfaces against the attack of very corrosive gasolines. Its performance, as well as those of worldwide-employed nitrogen-free carboxylic-diacid-based corrosion inhibitors, were experimentally evaluated and compared. Through Density-Functional-Theory calculations of the molecular interactions of the corrosion inhibitors with an iron-oxide cluster model, along with the experimental corrosion-inhibiting evaluations, it is revealed that the zwitterionic-based chemical substantially overcomes the performance of nitrogen-free chemicals. It is shown by the theoretical results that the two carboxylic heads of either, the zwitterionic-based or the nitrogen-free corrosion inhibitors, reinforce the octahedral coordination around the exposed Fe3+ atom of the iron oxide. Furthermore, when the zwitterionic-based chemical is bonded to the Fe3+ atom, a two-rings chelate is formed, in contrast to the one-ring chelate formed by the nitrogen-free corrosion inhibitors. Finally, it is theoretically predicted that oleic solvents improve the performance of the zwitterionic-based corrosion inhibitor because preclude the steric hindrance of nitrogen.

Corrosion inhibitors: design, performance, and computer simulations.

The development of a methodology to predict the performance of a corrosion inhibitor (CI) using specific types of modeled and experimental surfaces and their subsequent estimation is presented. For previously reported imidazoline CIs, the theoretical partition coefficients and molecular volumes were calculated, providing a guide for molecular engineering of new imidazolines. The new CIs, N-[2-(2-alkyl-4,5-dihydroimidazol-1-yl)ethyl]alkylamides and N-[2-(2-alkyloylaminoethylamino)ethyl]alkylamides, were designed, prepared, and their theoretical partition coefficients and molecular volumes calculated. These indexes were correlated between tested and prototype CIs to select the best ones for the corrosion inhibition tests. The inhibition efficiencies were measured through potentiodynamic polarization curves (PPC), linear polarization resistance (LPR), and weight loss measurements (WLM) for SAE-1010 and SAE-1018 steels. The leading molecules were 1-(2-decylaminoethyl)-2-decylimidazoline and 1-(2-dodecylaminoethyl)-2-dodecylimidazoline with WLM efficiencies (steel 1010), of 62.8 and 78.9%, respectively. The efficiencies for the PPC/LPR tests (steel 1018) were 97 and 94%. To understand the mechanism of action of CIs, a simple model is suggested for the growth of self-assembled monolayers of CIs on a crystalline substrate. This model takes into account the amphiphilic nature of the inhibitor molecule on the adsorption process. Despite the simplicity of the model, the Monte Carlo simulations reproduce qualitatively many of the experimentally observed features involved in the formation of monolayers and provide a tentative explanation for the mechanism of corrosion inhibition.

Structural relationship between a host included chain of spirocyclic water hexamers and bulk water--the role of water clusters in self assembly and crystallization processes.

Infinite chains of spirocyclic water hexamers are included in the crystal lattice of a tin complex with a curved, hydrophobic surface and only weak intermolecular bonding interactions between the host molecules, so that the enclosed water clusters might be reminiscent of the solvation sphere in solution.

Boron-nitrogen macrocycles: a new generation of calix[3]arenes.

The simple condensation reaction of 3,5-di-tert-butyl salicylaldehyde and 3-aminophenylboronic acid leads to a trimeric macrocyclic compound. The ability of this molecule to include small organic molecules was in a first approximation analyzed by (1)H NMR spectroscopy and X-ray crystallography.

Quantum chemical characterization of zwitterionic structures: Supramolecular complexes for modifying the wettability of oil-water-limestone system.

In this work, we present a quantum chemical study pertaining to some supramolecular complexes acting as wettability modifiers of oil-water-limestone system. The complexes studied are derived from zwitterionic liquids of the types N'-alkyl-bis, N-alquenil, N-cycloalkyl, N-amyl-bis-beta amino acid or salts acting as sparkling agents. We studied two molecules of zwitterionic liquids (ZL10 and ZL13), HOMO and LUMO levels, and the energy gap between them, were calculated, as well as the electron affinity (EA) and ionization potential (IP), chemical potential, chemical hardness, chemical electrophilicity index and selectivity descriptors such Fukui indices. In this work, electrochemical comparison was realized with cocamidopropyl betaine (CPB), which is a structure zwitterionic liquid type, nowadays widely applied in enhanced recovery processes.

Boron macrocycles having a calix-like shape. Synthesis, characterization, X-ray analysis, and inclusion properties.

The syntheses, structure, and inclusion properties of trinuclear boron compounds having a calix-like shape are described. The compounds have been obtained via self-assembly reactions between salicylaldehyde derivatives and 3-aminophenylboronic acid, whereby the formation of three N --> B coordination bonds favored the oligomerization. The products have high melting points (>370 degrees C), are stable to moisture, and have good solubility in organic solvents; the latter property is useful for host-guest recognition experiments. The structural analysis by X-ray diffraction revealed that diverse conformations are possible because of the presence of two different units of aromatic rims. A cone-cone (double-cone) conformation is observed for three of these compounds, while the remaining one has a cone-partial cone conformation. An analysis of the molecular packing showed that the molecules are stacked in columns in two different orientations in relation to the organization of the macrocycles when referred to the N-B bonds. The inclusion properties toward primary amines and ammonium chlorides were analyzed by titration experiments and monitored by UV spectroscopy, whereby association constants on the order of 10(2)-10(3) M(-1) were determined.

Novel phthalocyaninatobis(alkylcarboxylato)silicon(IV) compounds: NMR data and X-ray structures to study the spacing provided by long hydrocarbon tails that enhance their solubility.

The reaction between trans-PcSiCl2 (1) and the potassium salts of six fatty acids (2 a-2 f) led to the trans-PcSi[OOC(CH2)nCH3]2 compounds (3 a-3 f), which were characterised by elemental analysis, IR, UV/Vis and 1H, 13C, and 29Si NMR spectroscopy. From a detailed study of the NMR spectra, the strong anisotropic currents of the Pc macrocycle were found to have an effect on up to the sixth methylenic group. As expected, the length of the hydrocarbon tail does not affect the chemical shift of the 29Si nucleus of any of the compounds, appearing at around -222.6. The structures of PcSi[OOC(CH2)nCH3]2, where n = 7, 10, 12, 13 and 20, were determined by X-ray crystallography. All the compounds were found to be triclinic with a P1 space group. In all cases the observed crystallographic pseudosymmetry is Ci and the asymmetric unit consists of half a molecule. The silicon atom is at the centre of a distorted octahedron and hence its coordination number is six. The carboxylate fragments are in a trans configuration with respect to the Pc macrocycle. The supramolecular structures are discussed in detail herein. The correlation between the 1H NMR chemical shifts and the position of the corresponding carbon atoms in the hydrocarbon tail reveals that the dicarboxylate substituents exhibit a spacer-like behaviour that enhances the solubility. A detailed study of the tail variable allowed us to evaluate the loss of radial shielding along the Pc2- ligand.

Synthesis, characterization, biocide and toxicological activities of di-n-butyl- and diphenyl-tin(IV)-salicyliden-beta-amino alcohol derivatives.

The one pot reaction of salicylaldehyde 1, beta-amino alcohols 2a-2c, and di-n-butyltin(IV) oxide 3a or diphenyltin(IV) oxide 3b produced five diorganotin(IV) compounds, 4a-4c, 5a, and 5c, in good yields. All compounds were characterized by IR, (1)H, (13)C, and (119)Sn NMR spectroscopy, and elemental analysis; furthermore, compounds 4b, 4c, 5a, and 5c were characterized by X-ray diffraction analysis. After the structural characterization, all of the compounds were tested in vitro against Bacillus subtilis (Gram-positive, strain ATCC 6633), Escherichia coli (Gram-negative, strain DH5alpha), Pseudomonas aeruginosa (Gram-negative, strain BH3), Desulfovibrio longus (strain DSM 6739), and Desulfomicrobium aspheronum (strain DSM 5918) to assess their antimicrobial activity. Compounds 4 and 5 demonstrated a wide range of bactericidal activities against the tested aerobic (one Gram-positive and two Gram-negative subtypes) and anaerobic bacteria (two sulfate-reducing bacteria, SRB). Compound 5 had better bactericidal performances than compound 4. For all of the compounds, the acute toxicity was measured using luminescent bacteria toxicity (LBT-Microtox) tests to track their further environmental impact. According to these results and in order to fulfill environmental regulations, the toxicity of the compounds studied herein can be modulated through the proper selection of the disubstituted tin(IV) moiety.

Nanocap-shaped tin phthalocyanines: synthesis, characterization, and corrosion inhibition activity.

Thermal and microwave reactions between [PcSn(IV)Cl2] (1) and the potassium salts of eight fatty acids (2 a-h) led to cis-[(RCO2)2Sn(IV)Pc] compounds (3 a-h) in yields ranging from 54 to 90 %. Compounds 3 a-h were fully characterized by elemental analysis, spectroscopy (IR, UV/Vis, multinuclear NMR), and seven X-ray diffraction structures, whereby two different allotropes were observed in two cases. The two carboxylates in 3 have a cis anisobidentate binding mode, octacoordination of the tin atoms with square-antiprismatic geometry, and pi-electron-rich nanocap shapes. On account of the latter characteristics, 3 a-h compounds have anticorrosion properties. LPR and Tafel electrochemical methods were used to characterize the behavior of these derivatives in naturally aerated sour brine, which is a common environment in petroleum production and refinery operations. The measurement of the corrosion rate of carbon steel AISI 1018 in the presence of 3 a-h (500 ppm) gave efficiencies of 61-87 % for the inhibitor performance. Of the different derivatives examined, compounds 3 e and 3 h were the most effective corrosion inhibitor prototypes.

One-step preparation, structural assignment, and X-ray study of 2,2-di-n-butyl- and 2,2-diphenyl-6-aza-1,3-dioxa-2-stannabenzocyclononen-4-ones derived from amino acids.

Twenty-four 2,2-di-n-butyl- and 2,2-diphenyl-6-aza-1,3-dioxa-2-stannabenzocyclononen-4-ones, each having a transannular N-->Sn bond, have been prepared by one-step reactions of alpha-amino acids (1 a-l), salicylaldehyde (2), and either di-n-butyltin(IV) oxide (3) or diphenyltin(IV) oxide (4). The new methodology constitutes an easy, highly efficient one-step synthesis of diorganotin(IV) derivatives, such as 5 a-l and 6 a-l, from iminic tridentate ligands without isolation of the Schiff bases. The structures of all the compounds have been established by a combination of (1)H, (13)C, (15)N, and (119)Sn NMR spectroscopy, IR spectroscopy, mass spectrometry, and elemental analysis. In all cases, the (119)Sn chemical shifts, as well as the (1)J((119)Sn,(13)C) coupling constants, are indicative of pentacoordinated tin atoms in solution. The structures of compounds 5 a, d, f, 6 a, b, b-racemic, c, d, f, g, and l have been established by single-crystal X-ray diffraction analyses. The tin atoms in 5 d, f, 6 a, b, b-racemic, c, d, g, and l each have a distorted trigonal-bipyramidal (TBP) geometry, with the oxygen atoms from the phenol and carboxylate moieties occupying the axial positions, and the imine nitrogen and phenyl or n-butyl substituents occupying the equatorial positions. Compounds 5 a and 6 f show distorted octahedral (DOC) geometries due to intermolecular coordination of the carbonyl oxygen to the tin atom, in a trans disposition to the N-->Sn bond, leading to trimeric 5 a and a polymeric structure for compound 6 f. Additionally, measurement of the one-bond coupling constants (1)J((119)Sn,(13)C) in diphenyltin(IV) complexes (6 a-l) and their correlation with the CSn-C bond angles has allowed the derivation of an equation that can be applied to assess the geometry around the tin atom for other diphenyltin(IV) compounds in solution.

Microwave assisted stereoselective synthesis of cis-substituted TinIV phthalocyanine dicarboxylates. application as corrosion inhibitors.

Two PcSn(IV) dicarboxylate molecules were obtained through efficient microwave methodology with the aim to test them as corrosion inhibitors in the oil industry. The compounds were characterized by elemental analysis, IR, UV-vis, (1)H, (13)C NMR, and X-ray diffraction. The relative configuration of the two carboxylates is cis, placing the fatty acid moieties on the same face of the phthalocyanine macrocycle. In the solid-state the tin atoms possess square antiprismatic octacoordinated geometries. Both tin phthalocyanines were tested as corrosion inhibitors for hydrogen sulfide corrosive media showing a chemisorption process of the nanocap motifs on the metallic surface. Apparently, the length of the hydrophobic chain contributes significantly to the inhibition efficiency, in the sense that shorter chains increase the efficiency.