Physicochemical stability of PF-06439535 (bevacizumab-bvzr; Zirabev®), a bevacizumab biosimilar, under extended in-use conditions.

INTRODUCTION: PF-06439535 (bevacizumab-bvzr; Zirabev®) is a bevacizumab biosimilar. The stability profile and functional activity of PF-06439535 after dilution for intravenous infusion was evaluated following extended storage conditions. METHODS: PF-06439535 drug product was diluted in 0.9% sodium chloride to produce final concentrations of 1.4 and 16.5 mg/mL of PF-06439535, representing clinically relevant low and high doses for intravenous infusion. Three drug product lots and three infusion bag types (polyolefin, ethylene vinyl acetate, and polyvinyl chloride) were tested. To simulate the potential preparation and administration conditions encountered in a clinical setting, prepared drug solutions were initially stored at 25 ± 5°C for 24 ± 2 h, and then at 5 ± 3°C for up to 6 weeks. Extended storage was followed by storage at 25 ± 5°C for 24 ± 2 h before testing. Physicochemical and biological stability were evaluated according to visual characteristics and pH, protein concentration, particulate content, the proportions of molecular weight variants and charge variants, and relative potency. A wide range of analytical techniques optimized for PF-06439535 assessment were employed, such as size-exclusion chromatography, non-reducing sodium dodecyl sulfate capillary electrophoresis, cation-exchange chromatography, far-UV circular dichroism spectroscopy, differential scanning calorimetry, and an in vitro cell-based bioassay. RESULTS: For all concentrations, drug product lots, infusion bag types, and time points tested, there were no significant changes in protein concentration and no notable differences in visual characteristics (color, clarity, and visible particulates). The abundance of molecular weight variants and charge variants remained stable over the 6-week study period. There were no stability concerns with regard to sub-visible particles. There were no significant changes in primary, secondary, or tertiary structure. Finally, the in vitro relative potency of PF-06439535 was maintained throughout the study period. CONCLUSIONS: The stability and biological activity of PF-06439535 was maintained after dilution and storage for up to 6 weeks at 2-8°C, demonstrating the integrity of diluted PF-06439535 under extended in-use conditions.

Physicochemical stability of PF-05280014 (trastuzumab-qyyp; TrazimeraTM), a trastuzumab biosimilar, under extended in-use conditions.

INTRODUCTION: The stability and functional activity of the trastuzumab biosimilar PF-05280014 (trastuzumab-qyyp; TrazimeraTM), was assessed under extended in-use conditions. METHODS: PF-05280014 was diluted in 0.9% sodium chloride to final concentrations of 0.2 mg/mL and 4 mg/mL in 3 different types of infusion bags (polyolefin, ethylene vinyl acetate, and polyvinyl chloride). Infusion bags containing diluted PF-05280014 were stored at 25 ± 5° C for 24 h, before storage at 5 ± 3° C for 0, 1, 2, 4, or 6 weeks. Following extended storage, samples of PF-05280014 were removed from the infusion bags and stored at 25 ± 5° C for 24 h before biophysical and functional characterization. In addition to the visual characteristics of each sample at the various time points, the stability of PF-05280014 was assessed using a variety of biophysical techniques, including size-exclusion high-performance liquid chromatography, non-reducing sodium dodecyl sulfate capillary electrophoresis, cation-exchange chromatography, peptide mapping, far-UV circular dichroism spectroscopy, and differential scanning calorimetry. The functional activity of PF-05280014 was evaluated using a cell-based growth inhibition assay. RESULTS: For all PF-05280014 concentrations, time points and infusion bags tested, there were no significant differences in visual characteristics or in protein concentration. The were no significant changes in the relative abundance of molecular weight or charge variants throughout the 6-week study period. Similarly, there were no significant changes in primary structure or in secondary structure content during the study. The relative potency of PF-05280014 was also maintained throughout the 6-week period. CONCLUSIONS: The stability and functional activity of PF-05280014 was maintained following dilution in 0.9% sodium chloride and storage for up to 6 weeks at 2-8° C.

Biophysical Screens Identify Fragments That Bind to the Viral DNA-Binding Proteins EBNA1 and LANA.

The human gamma-herpesviruses Epstein-Barr virus (EBV) (HHV-4) and Kaposi's sarcoma-associated herpesvirus (KSHV) (HHV-8) are responsible for a number of diseases, including various types of cancer. Epstein-Barr nuclear antigen 1 (EBNA1) from EBV and latency-associated nuclear antigen (LANA) from KSHV are viral-encoded DNA-binding proteins that are essential for the replication and maintenance of their respective viral genomes during latent, oncogenic infection. As such, EBNA1 and LANA are attractive targets for the development of small-molecule inhibitors. To this end, we performed a biophysical screen of EBNA1 and LANA using a fragment library by saturation transfer difference (STD)-NMR spectroscopy and surface plasmon resonance (SPR). We identified and validated a number of unique fragment hits that bind to EBNA1 or LANA. We also determined the high-resolution crystal structure of one fragment bound to EBNA1. Results from this screening cascade provide new chemical starting points for the further development of potent inhibitors for this class of viral proteins.

Streptococcus pneumoniae serotype 11D has a bispecific glycosyltransferase and expresses two different capsular polysaccharide repeating units.

Streptococcus pneumoniae (pneumococcus) expresses a capsular polysaccharide (CPS) that protects against host immunity and is synthesized by enzymes in the capsular polysaccharide synthesis (cps) locus. Serogroup 11 has six members (11A to -E) and the CPS structure of all members has been solved, except for serotype 11D. The cps loci of 11A and 11D differ by one codon (N112S) in wcrL, which putatively encodes a glycosyltransferase that adds the fourth sugar of the CPS repeating unit (RU). Gas chromatography and nuclear magnetic resonance analysis revealed that 11A and 11D PSs contain identical CPS RUs that contain αGlc as the fourth sugar. However, ∼25% of 11D CPS RUs contain instead αGlcNAc as the fourth sugar, suggesting that 11D wcrL encodes a bispecific glycosyltransferase. To test the hypothesis that codon 112 of WcrL determines enzyme specificity, and therefore the fourth sugar in the RU, we generated three isogenic pneumococcal strains with 11A cps loci containing wcrL encoding Ser-112 (MBO128) or Ala-112 (MBO130). MBO128 was serologically and biochemically identical to serotype 11D. MBO130 has a unique serologic profile; has as much αGlcNAc as 11F, 11B, and 11C CPS do; and may represent a new serotype. These findings demonstrate how pneumococci alter their CPS structure and their immunologic properties with a minimal genetic change.

Elucidation of structural and antigenic properties of pneumococcal serotype 11A, 11B, 11C, and 11F polysaccharide capsules.

Despite the emerging impact of serogroup 11 serotypes in Streptococcus pneumoniae epidemiology, the structures of serogroup 11 capsule types have not been fully elucidated, particularly the locations of O-acetyl substitutions. Here, we report the complete structures of the serotype 11B, 11C, and 11F polysaccharides and a revision to the serotype 11A capsular polysaccharide using nuclear magnetic resonance (NMR). All structures shared a linear, tetrasaccharide backbone with a pendant phosphopolyalcohol. Three of four saccharides are conserved in all serotypes. The individual serotype capsules differed in the identity of one saccharide, the pendant phosphopolyalcohol, and the O-acetylation pattern. Though the assigned locations of O-acetate substitutions in this study differed from those of previous reports, our findings were corroborated with strong correlations to serology and genetics. We examined the binding of serotyping sera to serogroup 11 polysaccharides by using flow cytometry and an inhibition-type enzyme-linked immunosorbent assay (ELISA) and found that de-O-acetylation of capsular polysaccharides by mild hydrolysis decreases its immunoreactivity, supporting the crucial role of O-acetylation in the antigenicity of these polysaccharides. Due to strong correlations between polysaccharide structures and capsule biosynthesis genes, we were able to assign target substrates for the O-acetyltransferases encoded by wcwC, wcwR, wcwT, and wcjE. We identified antigenic determinants for serogroup 11 serotyping sera and highlight the idea that conventional serotyping methods are not capable of recognizing all putative variants of S. pneumoniae serogroup 11.

Structural elucidation of an α-1,2-mannosidase resistant oligosaccharide produced in Pichia pastoris.

The N-glycosylation pathway in Pichia pastoris has been humanized by the deletion of genes responsible for fungal-type glycosylation (high mannose) as well as the introduction of heterologous genes capable of forming human-like N-glycosylation. This results in a yeast host that is capable of expressing therapeutic glycoproteins. A thorough investigation was performed to examine whether glycoproteins expressed in glycoengineered P. pastoris strains may contain residual fungal-type high-mannose structures. In a pool of N-linked glycans enzymatically released by protein N-glycosidase from a reporter glycoprotein expressed in a developmental glycoengineered P. pastoris strain, an oligosaccharide with a mass consistent with a Hexose(9)GlcNAc(2) oligosaccharide was identified. When this structure was analyzed by a normal-phase high-performance liquid chromatography (HPLC), its retention time was identical to a Man(9)GlcNAc(2) standard. However, this Hexose(9)GlcNAc(2) oligosaccharide was found to be resistant to α-1,2-mannosidase as well as endomannosidase, which preferentially catabolizes endoplasmic reticulum oligosaccharides containing terminal α-linked glucose. To further characterize this oligosaccharide, we purified the Hexose(9)GlcNAc(2) oligosaccharide by HPLC and analyzed the structure by high-field one-dimensional (1D) and two-dimensional (2D) (1)H NMR (nuclear magnetic resonance) spectroscopy followed by structural elucidation by homonuclear and heteronuclear 1D and 2D (1)H and (13)C NMR spectroscopy. The results of these experiments lead to the identification of an oligosaccharide α-Man-(1 → 2)-ß-Man-(1 → 2)-ß-Man-(1 → 2)-α-Man-(1 → 2) moiety as part of a tri-antennary structure. The difference in enzymatic reactivity can be attributed to multiple ß-linkages on the α-1,3 arm of the Man(9)GlcNAc(2) oligosaccharide.

The use of 1H-31P GHMBC and covariance NMR to unambiguously determine phosphate ester linkages in complex polysaccharide mixtures.

Poly- and oligo-saccharides are commonly employed as antigens in many vaccines. These antigens contain phosphoester structural elements that are crucial to the antigenicity, and hence the effectiveness of the vaccine. Nuclear Magnetic Resonance (NMR) is a powerful tool for the site-specific identification of phosphoesters in saccharides. We describe here two advances in the characterization of phosphoesters in saccharides: (1) the use of (1)H-(31)P GHMBC to determine the site-specific identity of phosphoester moieties in heterogeneous mixtures and (2) the use of Unsymmetrical/Generalized Indirect Covariance (U/GIC) to calculate a carbon-phosphorus 2D spectrum. The sensitivity of the (1)H-(31)P GHMBC is far greater than the "standard" (1)H-(31)P GHSQC and allows long-range (3-5)J(HP) couplings to be readily detected. This is the first example to be reported of using U/GIC to calculate a carbon-phosphorus spectrum. The U/GIC processing affords, in many cases, a fivefold to tenfold or greater increase in signal-to-noise ratios in the calculated spectrum. When coupled with the high sensitivity of (1)H-(31)P HMBC, U/GIC processing allows the complete and unambiguous assignments of phosphoester moieties present in heterogeneous samples at levels of ~5% (or less) of the total sample, expanding the breadth of samples that NMR can be used to analyze. This new analytical technique is generally applicable to any NMR-observable phosphoester.

Structure-based design of small-molecule inhibitors of EBNA1 DNA binding blocks Epstein-Barr virus latent infection and tumor growth.

Epstein-Barr virus (EBV) is a DNA tumor virus responsible for 1 to 2% of human cancers including subtypes of Burkitt's lymphoma, Hodgkin's lymphoma, gastric carcinoma, and nasopharyngeal carcinoma (NPC). Persistent latent infection drives EBV-associated tumorigenesis. Epstein-Barr nuclear antigen 1 (EBNA1) is the only viral protein consistently expressed in all EBV-associated tumors and is therefore an attractive target for therapeutic intervention. It is a multifunctional DNA binding protein critical for viral replication, genome maintenance, viral gene expression, and host cell survival. Using a fragment-based approach and x-ray crystallography, we identify a 2,3-disubstituted benzoic acid series that selectively inhibits the DNA binding activity of EBNA1. We characterize these inhibitors biochemically and in cell-based assays, including chromatin immunoprecipitation and DNA replication assays. In addition, we demonstrate the potency of EBNA1 inhibitors to suppress tumor growth in several EBV-dependent xenograft models, including patient-derived xenografts for NPC. These inhibitors selectively block EBV gene transcription and alter the cellular transforming growth factor-ß (TGF-ß) signaling pathway in NPC tumor xenografts. These EBNA1-specific inhibitors show favorable pharmacological properties and have the potential to be further developed for the treatment of EBV-associated malignancies.

Enabling adoption of 2D-NMR for the higher order structure assessment of monoclonal antibody therapeutics.

The increased interest in using monoclonal antibodies (mAbs) as a platform for biopharmaceuticals has led to the need for new analytical techniques that can precisely assess physicochemical properties of these large and very complex drugs for the purpose of correctly identifying quality attributes (QA). One QA, higher order structure (HOS), is unique to biopharmaceuticals and essential for establishing consistency in biopharmaceutical manufacturing, detecting process-related variations from manufacturing changes and establishing comparability between biologic products. To address this measurement challenge, two-dimensional nuclear magnetic resonance spectroscopy (2D-NMR) methods were introduced that allow for the precise atomic-level comparison of the HOS between two proteins, including mAbs. Here, an inter-laboratory comparison involving 26 industrial, government and academic laboratories worldwide was performed as a benchmark using the NISTmAb, from the National Institute of Standards and Technology (NIST), to facilitate the translation of the 2D-NMR method into routine use for biopharmaceutical product development. Two-dimensional 1H,15N and 1H,13C NMR spectra were acquired with harmonized experimental protocols on the unlabeled Fab domain and a uniformly enriched-15N, 20%-13C-enriched system suitability sample derived from the NISTmAb. Chemometric analyses from over 400 spectral maps acquired on 39 different NMR spectrometers ranging from 500 MHz to 900 MHz demonstrate spectral fingerprints that are fit-for-purpose for the assessment of HOS. The 2D-NMR method is shown to provide the measurement reliability needed to move the technique from an emerging technology to a harmonized, routine measurement that can be generally applied with great confidence to high precision assessments of the HOS of mAb-based biotherapeutics.

Fragonomics: fragment-based drug discovery.

The use of smaller molecules (fragments) in the drug discovery process has led to success in delivering novel leads for many different targets. This process is a highly integrated process, starting from library design to screening and medicinal chemistry. An overview of this process is presented with particular emphasis placed on the NMR aspect of screening.

Suramin interacts with RANK and inhibits RANKL-induced osteoclast differentiation.

Suramin is a naphthalene trisulfonic acid derivative that inhibits osteoclast differentiation and bone resorption in vitro and in vivo; however, the mechanisms underlying this activity have not been studied. Receptor activator of NF-kB (RANK) ligand (RANKL) is a key regulator of osteoclast differentiation and function and this study evaluated the ability of suramin, which has been shown to disrupt protein-protein interactions, to interfere with RANKL functional activity and binding to RANK. Suramin inhibited osteoclastic bone resorption in a calvarial model and inhibited osteoclast differentiation in RANKL-stimulated murine spleen cells and RAW264.7 cells. RANKL-induced second messenger signaling (AKT and p38 MAP Kinase phosphorylation) was completely blocked by 100 microM suramin. The ability of RANKL to bind to recombinant human RANK-Fc (rhRANK-Fc) was reduced 50% by suramin in an in vitro binding assay. Surface plasmon resonance technology and nuclear magnetic resonance (NMR) were used to evaluate the ability of suramin to bind to rhRANK-Fc. Suramin was found to selectively interact with immobilized rhRANK-Fc chimera in a concentration-dependent manner by Biacore 3000 analysis. Similar results were obtained using saturation transfer difference NMR spectroscopy to demonstrate that suramin binds to rhRANK-Fc, but not IgG1Fc or sRANKL. In summary, these findings demonstrate that suramin inhibits sRANKL-induced osteoclast differentiation and suggest that these effects are mediated by suramin binding to RANK and blocking the ability of sRANKL to induce second messenger signaling.

ID NMR Methods in ligand-receptor interactions.

The drug discovery process often involves the screening of compound libraries to identify drug candidates capable of binding to target macromolecules. New approaches in biological and chemical research are driving a change in the pharmaceutical industry. Recent advances in NMR spectroscopy such as affinity NMR techniques, which detect binding of a small molecule with a "receptor", have been shown to be valuable tools to perform rapid screening of compounds for biological activity. These NMR observable events include using relaxation, chemical shift perturbations, translational diffusion, and magnetization transfer. These one dimensional NMR methods increase both the throughput of screening and yield crucial data on the mode of binding. The practical utility of these techniques will be described.

The effect of relaxation on the epitope mapping by saturation transfer difference NMR.

The effect of longitudinal relaxation of ligand protons on saturation transfer difference (STD) was investigated by using a known binding system, dihydrofolate reductase and trimethoprim. The results indicate that T1 relaxation of ligand protons has a severe interference on the epitope map derived from a STD measurement. When the T1s of individual ligand protons are distinctly different, STD experiments may not give an accurate epitope map for the ligand-target interactions. Measuring the relaxation times prior to mapping is strongly advised. A saturation time shorter than T1s is suggested for improving the potential epitope map. Reduction in temperature was seen to enhance the saturation efficiency in small to medium size targets.

Fragonomics: the -omics with real impact.

Fragonomics is the process of using small, relatively simple molecules to generate chemical starting points for hit generation. Fragonomics has come of age and is now one of the major concepts in hit generation. What is its future?

Saturation transfer difference NMR for fragment screening.

Fragment screening by saturation transfer difference nuclear magnetic resonance (STD-NMR) is a robust method for identifying small molecule binders and is well suited to a broad set of biological targets. STD-NMR is exquisitely sensitive for detecting weakly binding compounds (a common characteristic of fragments), which is a crucial step in finding promising compounds for a fragment-based drug discovery campaign. This protocol describes the development of a library suitable for STD-NMR fragment screening, as well as preparation of protein samples, optimization of experimental conditions, and procedures for data collection and analysis.

Identification of 3-O-acetylglycerol, a novel structural element in bacterial polysaccharides.

We have discovered a novel bacterial polysaccharide structural element, 3-O-acetylglycerol, in the Streptococcus pneumoniae ST11A polysaccharide: This moiety was elucidated through a combination of homonuclear and heteronuclear 1D and 2D NMR experiments using (1)H, (13)C, and (31)P in various combinations. The 3-O-acetylglycerol moiety is substoichiometrically O-acetylated in ST11A; yet, key connectivities that unequivocally show O-acetylation at the glycerol are provided by the long-range correlations from the acetate methyl groups to the glycerol in the (1)H-(13)C HMBC spectrum. Additionally, we clarify the (1)H-(31)P assignments previously presented.

Structure of the capsular polysaccharide of pneumococcal serotype 11A reveals a novel acetylglycerol that is the structural basis for 11A subtypes.

We have undertaken a structural assessment of Streptococcus pneumoniae 11A polysaccharide as well as two clinical isolates related to 11A. The clinical isolates were labeled 11Aalpha and 11Abeta. The result of our experiments is a revision to the old structure for S. pneumoniae 11A polysaccharide. The new structure differs from the old structure in both the primary connectivities and acetylation pattern. We also show that 11A contains an acetylglycerol-PO4 moiety, a substitution that is heretofore unknown in the bacterial polysaccharide literature. The two clinical isolates were also structurally characterized. 11Aalpha was determined to be identical to 11A. 11Abeta is a new serotype, which differs from 11A in the absence of the acetylation of the glycerol-PO4 moiety and a different acetylation pattern of the saccharides. Thus, we propose that the acetylglycerol is the structural basis for 11Aalpha and 11Abeta subtypes.

Practical aspects of NMR-based fragment discovery.

Fragment-based drug discovery (FBDD) needs a biophysical assay to complement, or even replace, biochemical screening. NMR is the best choice for this because NMR delivers many different types of data that impacts medicinal chemistry decisions. There are a multitude of different NMR methods which can be employed to these ends. The choice of which method to use will be different for every need. We discuss the different methods, the data they produce, and how they are best utilized in a FBDD setting.

Application of residual dipolar couplings in organic compounds.

Residual dipolar couplings (RDCs) induced by anisotropic media are a powerful tool for the structure determination of biomolecules through NMR spectroscopy. Recent advances have proven it to be a valuable tool for determination of the stereochemistry of organic molecules. By simple inspection or order matrix calculations, RDCs provide unambiguous information about the relative configurations or complete stereochemistry of organic compounds.

The absolute sign of J coupling constants determined using the order matrix calculation.

A novel methodology using the order matrix calculation to determine the absolute sign of spin-spin couplings based on the structure of organic compounds is presented. The sign of the residual dipolar coupling (RDC) depends on the sign of corresponding scalar spin-spin coupling constant and the sign of the RDC has a dramatic influence on the order matrix calculation. Therefore, the sign of the spin-spin coupling constant can be obtained by an order matrix calculation through the corresponding RDC. Six types of spin-spin coupling constants, including 2J(H,H), 1J(C,F), 2J(C,F), 3J(C,F), 2J(F,H) and 3J(F,H), were obtained simultaneously. Except for 3J(C,F) where the measured RDCs have very small magnitudes, the signs were determined unambiguously.