RESUMEN
Bismuth-based materials have emerged as promising catalysts in the electrocatalytic reduction of CO2 to formate. However, the reasons for the reconstruction of Bi-based precursors to form bismuth nanosheets are still puzzling, especially the formation of defective bismuth sites. Herein, we prepare bismuth nanosheets with vacancy-rich defects (V-Bi NS) by rapidly reconstructing Bi19Cl3S27 under negative potential. Theoretical analysis reveals that the introduction of chlorine induces the generation of intrinsic electric field in the precursor, thereby increasing the electron transfer rate and further promoting the metallization of trivalent bismuth. Meanwhile, experimental tests verify that Bi19Cl3S27 has a faster reconstruction rate than Bi2S3. The formed V-Bi NS exhibits up to 96 % HCOO- Faraday efficiency and 400â mA cm-2 HCOO- partial current densities, and its electrochemical active surface area normalized formate current density and yield are 2.2â times higher than those of intact bismuth nanosheets (I-Bi NS). Density functional theory calculations indicate that bismuth vacancies with electron-rich aggregation reduce the activation energy of CO2 to *CO2 - radicals and stabilize the adsorption of the key intermediate *OCHO, thus facilitating the reaction kinetics of formate production.
RESUMEN
Urea-assisted hybrid water splitting is a promising technology for hydrogen (H2 ) production, but the lack of cost-effective electrocatalysts hinders its extensive application. Herein, it is reported that Nitrogen-doped Co9 S8 /Ni3 S2 hybrid nanosheet arrays on nickel foam (N-Co9 S8 /Ni3 S2 /NF) can act as an active and robust bifunctional catalyst for both urea oxidation reaction (UOR) and hydrogen evolution reaction (HER), which could drive an ultrahigh current density of 400 mA cm-2 at a low working potential of 1.47 V versus RHE for UOR, and gives a low overpotential of 111 mV to reach 10 mA cm-2 toward HER. Further, a hybrid water electrolysis cell utilizing the synthesized N-Co9 S8 /Ni3 S2 /NF electrode as both the cathode and anode displays a low cell voltage of 1.40 V to reach 10 mA cm-2 , which can be powered by an AA battery with a nominal voltage of 1.5 V. The density functional theory (DFT) calculations decipher that N-doped heterointerfaces can synergistically optimize Gibbs free energy of hydrogen and urea, thus accelerating the catalytic kinetics of HER and UOR. This work significantly advances the development of the promising cobalt-nickel-based sulfide as a bifunctional electrocatalyst for energy-saving electrolytic H2 production and urea-rich innocent wastewater treatment.
RESUMEN
Glycerol-assisted hybrid water electrolysis is a potential strategy to achieve energy-efficient hydrogen production. However, the design of an efficient catalyst for the specific reaction is still a key challenge, which suffers from the barrier of regulating the adsorption characteristics of distinctive intermediates in different reactions. Herein, a novel rationale that achieves selective adsorption behavior modulation for self-supported nickel selenide electrode by heteroatom implantation and heterointerface construction through electrodeposition is developed, which can realize nichetargeting optimization on hydrogen evolution reaction (HER) and glycerol oxidation reaction (GOR), respectively. Specifically, the prepared Mo-doped Ni3 Se2 electrode exhibits superior catalytic activity for HER, while the NiSe-Ni3 Se2 electrode exhibits high Faradaic efficiency (FE) towards formate production for GOR. A two-electrode electrolyzer exhibits superb activity that only needs an ultralow cell voltage of 1.40 V to achieve 40 mA cm-2 with a high FE (97%) for formate production. Theoretical calculation unravels that the introduction of molybdenum contributes to the deviation of the d-band center of Ni3 Se2 from the Fermi level, which is conducive to hydrogen desorption. Meanwhile, the construction of the heterojunction induces the distortion of the surface structure of nickel selenide, which exposes highly active nickel sites for glycerol adsorption, thus contributing to the excellent electrocatalytic performance.
RESUMEN
Electrochemical conversion of CO2 to highly valuable ethanol has been considered a intriguring strategy for carbon neutruality. However, the slow kinetics of coupling carbon-carbon (C-C) bonds, especially the low selectivity ethanol than ethylene in neutral conditions, is a significant challenge. Herein, the asymmetrical refinement structure with enhanced charge polarization is built in the vertically oriented bimetallic organic frameworks (NiCu-MOF) nanorod array with encapsulated Cu2 O (Cu2 O@MOF/CF), which can induce an intensive internal electric field to increase the C-C coupling for producing ethanol in neutral electrolyte. Particularly, when directly employed Cu2 O@MOF/CF as the self-supporting electrode, the ethanol faradaic efficiency (FEethanol ) could reach maximum 44.3 % with an energy efficiency of 27 % at a low working-potential of -0.615â V versus the reversible hydrogen electrode (vs. RHE) using CO2 -saturated 0.5â M KHCO3 as the electrolyte. Experimental and theoretical studies suggest that the polarization of atomically localized electric fields derived from the asymmetric electron distribution can tune the moderate adsorption of *CO to assist the C-C coupling and reduce the formation energy of H2 CCHO*-to-*OCHCH3 for the generation of ethanol. Our research offers a reference for the design of highly active and selective electrocatalysts for reducing CO2 to multicarbon chemicals.
Asunto(s)
Dióxido de Carbono , Carbono , Adsorción , Electricidad , EtanolRESUMEN
Photocatalytic CO2 reduction (PCR) expresses great attraction to convert useless greenhouse gas into valuable chemical feedstock. However, the weak interactions between catalytic sites and PCR intermediates constrains the PCR activity and selectivity. Herein, we proposed a new strategy to match the intermediates due to the maximum orbital overlap of catalytic sites and C1 intermediates by establishing dual Jahn-Teller (J-T) sites, in which, the strongly asymmetric J-T sites can break the nonpolar CO2 molecules and self-adapt the different structure of C1 intermediates. Taking cobalt carbonate hydroxide as an example, the weakly symmetric dual cobalt (Co2 ) dual J-T sites, weakly asymmetric Fe&Co sites and strongly asymmetric Cu&Co sites were assembled. After illumination, the interaction between dual J-T sites and the CO2 molecules enhances J-T distortion, which further modulates the PCR activity and selectivity. As a result, the Cu&Co sites exhibited CO yield of 8137.9â µmol g-1 , about 2.3-fold and 4.2-fold higher than that of the Fe&Co and Co2 sites within 5-hour photoreaction, respectively. In addition, the selectivity achieved as high as 92.62 % than Fe&Co (88.67 %) and Co2 sites (55.33 %). This work provides a novel design concept for the construction of dual J-T sites to regulate the catalytic activity and selectivity.
RESUMEN
Hydrazine-assisted hybrid water electrolysis is an energy-saving approach to produce high-purity hydrogen, whereas the development of pH-universal bifunctional catalysts encounters a grand challenge. Herein, a phase-selective synthesis of ruthenium phosphide compounds hybrid with carbon forming pancake-like particles (denoted as Rux P/C-PAN, x = 1 or 2) is presented. The obtained RuP/C-PAN exhibits the highest catalytic activity among the control samples, delivering ultralow cell voltages of 0.03, 0.27, and 0.65 V to drive 10 mA cm-2 using hybrid water electrolysis corresponding to pH values of 14, 7, and 0, respectively. Theoretical calculation deciphers that the RuP phase displays optimized free energy for hydrogen adsorption and reduced energy barrier for hydrazine dehydrogenation. This work may not only open up a new avenue in exploring universally compatible catalyst to transcend the limitation on the pH value of electrolytes, but also push forward the development of an energy-saving hydrogen generation technique based on emerging hybrid water electrolysis.
Asunto(s)
Rutenio , Agua , Electrólisis , Hidrazinas , Hidrógeno , Concentración de Iones de HidrógenoRESUMEN
Carbon materials, as promising anode candidates for K+ storage due to their low cost, abundant sources, and high physicochemical stability, however, encounter limited specific capacity and unfavorable cycling stability that seriously hinder their practical applications. Herein, a feasible strategy to tailor and stabilize the nitrogen species in unique P/N co-doped disk-like carbon through the Sn incorporation (P/NSn -CD) is presented, which can largely enhance the specific capacity and cycling capability for K+ storage. Specifically, it delivers a high specific capacity of 439.3 mAh g-1 at 0.1 A g-1 and ultra-stable cycling capability with a capacity retention of 93.5% at 5000 mA g-1 over 5000 cycles for K+ storage. The underlying mechanism for the superior K+ storage performance is investigated by systematical experimental data combined with theoretical simulation results, which can be derived from the increased edge-nitrogen species, improved content and stability of P/N heteroatoms, and enhanced ionic/electronic kinetics. After coupling P/NSn -CD anode with activated carbon cathode, the KIHCs can deliver a high energy density of 171.7 Wh kg-1 at 106.8 W kg-1 , a superior power density (14027.0 W kg-1 with 31.2 Wh kg-1 retained), and ultra-stable lifespan (89.7% retention after 30 K cycles with cycled at 2 A g-1 ).
Asunto(s)
Nitrógeno , Potasio , Electrodos , Iones , CinéticaRESUMEN
Clean hydrogen evolution through electrochemical water splitting underpins various innovative approaches to the pursuit of sustainable energy conversion technologies, but it is blocked by the sluggish anodic oxygen evolution reaction (OER). The hydrazine oxidation reaction (HzOR) has been considered as one of the most promising substitute for OER to improve the efficiency of hydrogen evolution reaction (HER). Herein, we construct novel dual nanoislands on Ni/C hybrid nanosheet array: one kind of island represents the part of bare Ni particle surface, while the other stands for the part of core-shell Ni@C structure (denoted as Ni-C HNSA), in which exposed Ni atoms and Ni-decorated carbon shell perform as active sites for HzOR and HER respectively. As a result, when the current density reaches 10â mA cm-2 , the working potentials are merely -37â mV for HER and -20 mV for HzOR. A two-electrode electrolyzer exhibits superb activity that only requires an ultrasmall cell voltage of 0.14â V to achieve 50â mA cm-2 .
RESUMEN
The low thermodynamic potential (-0.33 V) and safe by-product of N2 /H2 O, make utilizing hydrazine oxidation reaction (HzOR) to replace thermodynamically-unfavorable and kinetically-sluggish oxygen evolution reaction a promising tactic for energy-efficient hydrogen production. However, the complexity of bifunctionality increases difficulties for effective material design, thus hindering the large-scale hydrogen generation. Herein, we present the rationally designed synthesis of superhydrophilic Ni-based multicomponent arrays (Ni NCNAs) composed of 1D nanorod-confined-nanoflakes (2D), which only needs -26 mV of working potential and 47 mV of overpotential to reach 10 mA cm-2 for HzOR and HER, respectively. Impressively, this Ni NCNA electrode exhibits the top-level bifunctional activity for overall hydrazine splitting (OHzS) with an ultralow voltage of 23 mV at 10 mA cm-2 and a record-high current density of 892 mA cm-2 at just 0.485 V, also achieves the high-speed hydrogen yield driven by a waste AAA battery for OHzS.
RESUMEN
Electrochemical water splitting for H2 production is limited by the sluggish anode oxygen evolution reaction (OER), thus using hydrazine oxidation reaction (HzOR) to replace OER has received great attention. Here we report the hierarchical porous nanosheet arrays with abundant Ni3 N-Co3 N heterointerfaces on Ni foam with superior hydrogen evolution reaction (HER) and HzOR activity, realizing working potentials of -43 and -88â mV for 10â mA cm-2 , respectively, and achieving an industry-level 1000â mA cm-2 at 200â mV for HzOR. The two-electrode overall hydrazine splitting (OHzS) electrolyzer requires the cell voltages of 0.071 and 0.76â V for 10 and 400â mA cm-2 , respectively. The H2 production powered by a direct hydrazine fuel cell (DHzFC) and a commercial solar cell are investigated to inspire future practical applications. DFT calculations decipher that heterointerfaces simultaneously optimize the hydrogen adsorption free energy (ΔGH* ) and promote the hydrazine dehydrogenation kinetics. This work provides a rationale for advanced bifunctional electrocatalysts, and propels the practical energy-saving H2 generation techniques.
RESUMEN
Lithium metal is an ideal electrode material for future rechargeable lithium metal batteries. However, the widespread deployment of metallic lithium anode is significantly hindered by its dendritic growth and low Coulombic efficiency, especially in ester solvents. Herein, by rationally manipulating the electrolyte solvation structure with a high donor number solvent, enhancement of the solubility of lithium nitrate in an ester-based electrolyte is successfully demonstrated, which enables high-voltage lithium metal batteries. Remarkably, the electrolyte with a high concentration of LiNO3 additive presents an excellent Coulombic efficiency up to 98.8 % during stable galvanostatic lithium plating/stripping cycles. A full-cell lithium metal battery with a lithium nickel manganese cobalt oxide cathode exhibits a stable cycling performance showing limited capacity decay. This approach provides an effective electrolyte manipulation strategy to develop high-voltage lithium metal batteries.
RESUMEN
Calcium-metal batteries (CMBs) provide a promising option for high-energy and cost-effective energy-storage technology beyond the current state-of-the-art lithium-ion batteries. Nevertheless, the development of room-temperature CMBs is significantly impeded by the poor reversibility and short lifespan of the calcium-metal anode. A solvation manipulation strategy is reported to improve the plating/stripping reversibility of calcium-metal anodes by enhancing the desolvation kinetics of calcium ions in the electrolyte. The introduction of lithium salt changes the electrolyte structure considerably by reducing coordination number of calcium ions in the first solvation shell. As a result, an unprecedented Coulombic efficiency of up to 99.1 % is achieved for galvanostatic plating/stripping of the calcium-metal anode, accompanied by a very stable long-term cycling performance over 200 cycles at room temperature. This work may open up new opportunities for development of practical CMBs.
RESUMEN
Volume expansion and poor conductivity are two major obstacles that hinder the pursuit of the lithium-ion batteries with long cycling life and high power density. Herein, we highlight a misfit compound PbNbS3 with a soft/rigid superlattice structure, confirmed by scanning tunneling microscopy and electrochemical characterization, as a promising anode material for high performance lithium-ion batteries with optimized capacity, stability, and conductivity. The soft PbS sublayers primarily react with lithium, endowing capacity and preventing decomposition of the superlattice structure, while the rigid NbS2 sublayers support the skeleton and enhance the migration of electrons and lithium ions, as a result leading to a specific capacity of 710â mAh g-1 at 100â mA g-1 , which is 1.6 times of NbS2 and 3.9 times of PbS. Our finding reveals the competitive strategy of soft/rigid structure in lithium-ion batteries and broadens the horizons of single-phase anode material design.
RESUMEN
Research on sodium-ion batteries (SIBs) has recently been revitalized due to the unique features of much lower costs and comparable energy/power density to lithium-ion batteries (LIBs), which holds great potential for grid-level energy storage systems. Transition metal dichalcogenides (TMDCs) are considered as promising anode candidates for SIBs with high theoretical capacity, while their intrinsic low electrical conductivity and large volume expansion upon Na+ intercalation raise the challenging issues of poor cycle stability and inferior rate performance. Herein, the designed formation of hybrid nanoboxes composed of carbon-protected CoSe2 nanoparticles anchored on nitrogen-doped carbon hollow skeletons (denoted as CoSe2 @Câ©NC) via a template-assisted refluxing process followed by conventional selenization treatment is reported, which exhibits tremendously enhanced electrochemical performance when applied as the anode for SIBs. Specifically, it can deliver a high reversible specific capacity of 324 mAh g-1 at current density of 0.1 A g-1 after 200 cycles and exhibit outstanding high rate cycling stability at the rate of 5 A g-1 over 2000 cycles. This work provides a rational strategy for the design of advanced hybrid nanostructures as anode candidates for SIBs, which could push forward the development of high energy and low cost energy storage devices.
RESUMEN
Sodium-ion batteries have attracted tremendous attention due to their much lower cost and similar working principle compared with lithium-ion batteries, which have been invited great expectation as energy storage devices in grid-level applications. The sodium superionic conductor Na3 V2 (PO4 )3 has been considered as a promising cathode candidate; however, its intrinsic low electronic conductivity results in poor rate performance and unsatisfactory cycling performance, which severely impedes its potential for practical applications. Herein, we developed a facile one-pot strategy to construct dual carbon-protected hybrid structure composed of carbon coated Na3 V2 (PO4 )3 nanoparticles embedded with carbon matrix with excellent rate performance, superior cycling stability and ultralong lifespan. Specifically, it can deliver an outstanding rate performance with a 51.5 % capacity retention from 0.5 to 100â C and extraordinary cycling stability of 80.86 % capacity retention after 6000 cycles at the high rate of 20â C. The possible reasons for the enhanced performance could be understood as the synergistic effects of the strengthened robust structure, facilitated charge transfer kinetics, and the mesoporous nature of the Na3 V2 (PO4 )3 hybrid structure. This work provides a cost-effective strategy to effectively optimize the electrochemical performance of a Na3 V2 (PO4 )3 cathode, which could contribute to push forward the advance of its practical applications.
RESUMEN
Sodium-ion batteries (SIBs) have been considered as promising energy storage devices in grid-level applications, owing to their largely reduced cost compared with that of lithium-ion batteries. However, the practical application of SIBs has been seriously hindered because of the lack of appropriate anode materials, limited by the thermodynamics perspective, which is one of the central task at current stage. Herein, we have developed a general one-pot strategy for the synthesis of transition-metal phosphide (TMP) based hybrid nanosheets composed of carbon-coated TMP nanoparticles anchored to the surface of nitrogen-doped carbon nanosheets. This facile and cost-effective method is quite universal and holds potential to be further extended to other metal phosphide materials. Significantly, the hybrid nanosheet electrode possesses excellent sodium storage properties as anodes for SIBs, including high specific capacity, an ultra-long cycle life and a remarkable rate performance. This work makes a significant contribution to not only the synthetic methodology of TMP-carbon two-dimensional hybrid nanostructures, but also the application of TMP-based anodes for high-energy SIBs.
RESUMEN
Solution-synthesized thermoelectric nanostructured materials have the potential to have lower cost and higher performance than materials synthesized by solid-state methods. Herein we present the synthesis of ultrathin PbTe nanowires, which are compressed by spark plasma sintering at various temperatures in the range of 405-500 °C. The resulting discs possess grains with sizes of 5-30 µm as well as grains with sizes on the order of the original 12 nm diameter PbTe nanowires. This micro- and nanostructure leads to a significantly reduced thermal conductivity compared to bulk PbTe. Careful electron transport analysis shows suppressed electrical conductivity due to increased short-range and ionized defect scatterings, while the Seebeck coefficient remains comparable to the bulk value. The PbTe nanowire samples are found unintentionally p-type doped to hole concentrations of 2.16-2.59 × 10(18) cm(-3). The maximum figure of merit achieved in the unintentionally doped spark plasma sintered PbTe nanowires is 0.33 at 350 K, which is among the highest reported for unintentionally doped PbTe at low temperatures.
RESUMEN
Complex hollow structures of transition metal oxides, especially mixed metal oxides, could be promising for different applications such as lithium ion batteries. However, it remains a great challenge to fabricate well-defined hollow spheres with multiple shells for mixed transition metal oxides. Herein, we have developed a new "penetration-solidification-annealing" strategy which can realize the synthesis of various mixed metal oxide multi-shelled hollow spheres. Importantly, it is found that multi-shelled hollow spheres possess impressive lithium storage properties with both high specific capacity and excellent cycling stability. Specifically, the carbon-coated CoMn2O4 triple-shelled hollow spheres exhibit a specific capacity of 726.7â mA h g(-1) and a nearly 100 % capacity retention after 200 cycles. The present general strategy could represent a milestone in design and synthesis of mixed metal oxide complex hollow spheres and their promising uses in different areas.
Asunto(s)
Litio/química , Metales/química , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Óxidos/químicaRESUMEN
While the synthesis of TiO2 hollow structures is well-established, in most cases it is particularly difficult to control the crystallization of TiO2 in solution or by calcination. As a result, TiO2 hollow structures do not really exhibit enhanced lithium storage properties. Herein, we report a simple and cost-effective template-assisted method to synthesize anatase TiO2 hollow spheres composed of highly crystalline nanocrystals, in which carbonaceous (C)â spheres are chosen as the removable template. The release of gaseous species from the combustion of Câ spheres may inhibit the growth of TiO2 crystallites so that instead small TiO2 nanocrystals are generated. The small size and high crystallinity of primary TiO2 nanoparticles and the high structural integrity of the hollow spheres gives rise to significant improvements in the cycling stability and rate performance of the TiO2 hollow spheres.
Asunto(s)
Litio/química , Nanopartículas/química , Titanio/química , Cristalización , Suministros de Energía Eléctrica , Nanopartículas/ultraestructura , NanotecnologíaRESUMEN
For many years, humans have been relentlessly focused on enhancing battery longevity and boosting energy storage capacities. The performance and durability of a battery depend significantly on the material used for its electrodes. In this context, merging machine learning with density functional theory (DFT) calculations has emerged as a pivotal approach to advancing the exploration of battery crystal structures. We present a new method that combines a graph convolutional neural network (GNN) with a Transformer convolutional layer, which we call Transformer-GNN. To underscore its efficacy, we benchmarked Transformer-GNN against three established statistical machine learning models: Support Vector Machine, Random Forest, and XGBoost. We also developed a standard GNN, which we refer to as Basic-GNN. Additionally, we compared Basic-GNN with Transformer-GNN to highlight the improvements brought about by incorporating the Transformer convolutional layer. The Transformer-GNN model outperforms the other models, achieving the highest R2 value of 0.82 and the lowest mean squared error of 0.3161. Our findings demonstrate that the Transformer-GNN can profoundly understand battery crystal structures, thus forging the path toward more sophisticated and durable battery systems. Leveraging the GNN model's voltage predictions in tandem with the capacity data sourced from the database, we screened and pinpointed Na(NiO2)2 as a high-voltage (higher than 5 V), high-capacity sodium cathode material. We conducted DFT calculations on Na(NiO2)2 and revealed the migration mechanism of the Na ions.