Clinical Significance of Thyroid Autoantibodies in Differential Diagnosis and Predicting the Course of Programmed Cell Death Protein-1 Inhibitor-Induced Thyroid Dysfunction.

OBJECTIVE: Thyroid immune-related thyrotoxicosis is one of the most common adverse effects in patients treated with programmed cell death protein-1 (PD-1) inhibitors. We investigated the significance of levels of serum anti-thyroglobulin antibodies (TgAbs), anti-thyroid peroxidase antibodies (TPOAbs), and thyroid-stimulating hormone receptor antibodies (TRAbs) in the identification of anti-PD-1-induced thyroid thyrotoxicosis. METHODS: We divided 161 patients with thyroid dysfunction who received PD-1 inhibitors at our hospital between January 2022 and June 2024 into 3 groups: primary hypothyroidism group, primary hyperthyroidism group, and destructive thyroiditis group. The characteristics of the 3 groups were determined, and the positivity rates of serum TgAbs, TPOAbs, and TRAbs were assessed. An additional 42 patients diagnosed with Hashimoto's thyroiditis were selected as the control group for PD-1 inhibition-induced destructive thyroiditis. Age, sex, and time of transition from thyrotoxicosis to hypothyroidism in the 2 groups were compared. RESULTS: In the primary hypothyroidism group, only 1 case was TPOAbs-positive (1/1%). In the destructive thyroiditis group, the positivity rate for TPOAbs or TgAbs was 92.9%, and TPOAbs and TgAbs were negative in the primary hyperthyroidism group. TRAbs were undetectable in all 3 groups. There were statistically significant differences in age, sex, and time from thyrotoxicosis to hypothyroidism in the PD-1 induced destructive thyroiditis and Hashimoto's thyroiditis groups. CONCLUSIONS: In patients with thyrotoxicosis caused by PD-1 inhibitors, serum TgAb, and TPOAb levels can be used to distinguish between primary hyperthyroidism and destructive thyroiditis. This study provides insights into novel treatment targets and effective management strategies for PD-1-induced thyrotoxicosis.

Structural basis for potassium transport in prokaryotes by KdpFABC.

KdpFABC is an oligomeric K+ transport complex in prokaryotes that maintains ionic homeostasis under stress conditions. The complex comprises a channel-like subunit (KdpA) from the superfamily of K+ transporters and a pump-like subunit (KdpB) from the superfamily of P-type ATPases. Recent structural work has defined the architecture and generated contradictory hypotheses for the transport mechanism. Here, we use substrate analogs to stabilize four key intermediates in the reaction cycle and determine the corresponding structures by cryogenic electron microscopy. We find that KdpB undergoes conformational changes consistent with other representatives from the P-type superfamily, whereas KdpA, KdpC, and KdpF remain static. We observe a series of spherical densities that we assign as K+ or water and which define a pathway for K+ transport. This pathway runs through an intramembrane tunnel in KdpA and delivers ions to sites in the membrane domain of KdpB. Our structures suggest a mechanism where ATP hydrolysis is coupled to K+ transfer between alternative sites in KdpB, ultimately reaching a low-affinity site where a water-filled pathway allows release of K+ to the cytoplasm.

Three-dimensional liver models: state of the art and their application for hepatotoxicity evaluation.

While alternative methods for toxicity testing using re-constructed human skin and cornea have been written into guidelines and adopted by regulatory authorities, three-dimensional (3D) liver models are currently applied in the industrial settings for hepatotoxicity screening and prediction. These 3D liver models can recapitulate the architecture, functionality and toxicity response of the native liver, demonstrated by a set of related hallmarks. In this comprehensive review, non-scaffold and scaffold-based methods available for 3D liver model formation are introduced, with an emphasis on their advantages and drawbacks. We then focus on the characteristics of primary human hepatocytes, stem cell derived hepatocyte like cells, and immortalized hepatic cell lines as cell resources for model reconstruction. Primary hepatocytes are generally regarded to be superior to other cell types due to their comparable metabolic profiles to the native liver. Additionally, the application of 3D liver models (mostly liver spheroids) on the evaluation of drug induced liver injury and chronic liver diseases (steatosis, cirrhosis, cholestasis), as well as the potential of nanomaterials to introduce hepatotoxicity are summarized. Finally, the global 3D cell market from 3D liver model manufacturing to the contract service of in vitro hepatotoxicity testing using the models is extensively explored. However, 3D liver models face cultural and regulatory barriers in different countries, and therefore the business development of 3D liver models is not easy. Toxicologists, material scientists, engineers should work together to develop, validate and apply 3D liver models for hepatotoxicity testing under the support from industrial organizations and governmental agencies.

Long noncoding RNA HULC in acute ischemic stroke: Association with disease risk, severity, and recurrence-free survival and relation with IL-6, ICAM1, miR-9, and miR-195.

BACKGROUND: This study aimed to evaluate the clinical role of long noncoding RNA (lncRNA) HULC in acute ischemic stroke (AIS). METHODS: LncRNA HULC in plasma samples from 215 first episode AIS patients and 215 age/gender-matched non-AIS controls was detected by reverse transcriptional-quantitative polymerase chain reaction (RT-qPCR). Then, in AIS patients, interleukin-6 and intercellular adhesion molecule 1 (ICAM1), as well as microRNA (miR) target of lncRNA HUCL (miR-9 and miR-195), were detected by enzyme-linked immunosorbent assay and RT-qPCR, respectively. Disease severity was assessed by National Institution of Health stroke scale (NIHSS) score. AIS recurrence or death was recorded, and recurrence-free survival (RFS) was calculated. RESULTS: LncRNA HULC was increased in AIS patients compared to non-AIS controls (P < .001), and receiver operating characteristic curve showed that it was correlated with increased AIS risk (area under curve: 0.876, 95% confidence interval: 0.843-0.908). Meanwhile, lncRNA HULC was positively correlated with NIHSS score (P < .001, r = .456), interleukin-6 (P < .001, r = .275) and ICAM1 (P < .001, r = .383), whereas negatively correlated with miR-9 (P < .001, r = -.438) but not miR-195 (P = .205, r = -.087) in AIS patients. Additionally, miR-9 was negatively correlated with NIHSS score (P < .001, r = -.335), interleukin-6 (P = .001, r = -.231), and ICAM1 (P < .001, r = -.280), while miR-195 was only negatively associated with NIHSS score (P = .041, r = -.139) in AIS patients. Moreover, lncRNA HULC high expression predicted worse RFS (P = .013) in AIS patients. CONCLUSION: LncRNA HULC is correlated with higher AIS risk, increased disease severity and worse prognosis in AIS patients. Meanwhile, it associates with higher IL-6, elevated ICAM1, and lower miR-9 AIS patients.

Fenton cleaning strategy for ceramic membrane fouling in wastewater treatment.

Membrane fouling is an obstacle impeding the wide applications of ceramic membranes and organics are responsible for most of the membrane fouling issues in wastewater treatment. In this study, Fenton cleaning strategy was firstly proposed to clean ceramic membrane fouling in wastewater treatment. Fe2+ efficiently catalyzed fouling cleaning with H2O2 (1.5%) to recover the filterability of ceramic membrane. The maximum ∆TMP recovery (over 99%) was achieved at an optimal Fe2+ dosage of 124 mg/L after 6 hr of immersion cleaning. The total residual membrane fouling resistance decreased gradually from this optimum value as the Fe2+ dosage increased above 124 mg/L. The residual hydraulically reversible fouling resistance accounted for most of the membrane fouling and was basically removed (≤3.0 × 109 m-1) when Fe2+ dosages higher than 124 mg/L were used. The foulants responsible for the formation of a residual hydraulically reversible fouling layer (DOC (dissolved organic carbon), proteins, polysaccharides, EEM (fluorescence excitation-emission matrix spectra), SS (suspended solids), and VSS (volatile suspended solids)) were gradually removed as the Fe2+ dosage increased. These residual organic foulants were degraded from biopolymers (10-200 kDa) to low molecular weight substances (0.1-1 kDa), and the particle size of these residual foulants decreased significantly as a result. The strong oxidation power of hydrogen peroxide/hydroxy radicals towards organic foulants was enhanced by Fe2+. Fe2+ played a significant role in the removal of hydraulically reversible fouling and irreversible fouling from the ceramic membrane. However, Fe2+ (≥124 mg/L) increased the likelihood of forming secondary iron-organics aggregates.

Automated contour analysis of multi-cellular spheroids spreading through high content imaging.

The morphology of 2D cell colonies has been studied to understand tumor metastasis in the past decades. However, 2D cell cultures are lacking many features of 3D tissues, and their physiological behaviors are quite different from solid tumors in vivo. In this work, we studied the multi-cellular tumor spheroid (MCTS) spreading on the substrate, which keeps parts of 3D tissue characteristics and facilitates cell tracking through 2D imaging. By using a high content imaging system (HCS), we tracked multiple spheroids in one single 96-well plate for 36 h. An automated algorithm based on Otsu's method was developed to investigate the morphological details of spheroids through the quantification of radius length and its coefficients of variation. Spheroid spreading is altered by the PIP-platin, which was a novel platinum based drug previously reported by us with an inhibitory effect on cell migration. All parameters showed dose dependent decreases when PIP-platin concentration increased, indicating the inhibition of spheroid expansion by this compound. To investigate the surface roughness of spheroids affected by the drug, we applied the Fourier parameter ß and the normalized standard deviation of the radius STD r / [Formula: see text], which were found inversely proportional to the concentrations of PIP-platin. Particularly at the low drug concentrations, the indices of contour roughness appeared to be more sensitive than spheroid sizes, which could be the potential morphological markers for high content screening of drugs.

Detection of nanocarrier potentiation on drug induced phospholipidosis in cultured cells and primary hepatocyte spheroids by high content imaging and analysis.

Considerable effort has been made to develop nanocarriers for controlled drug delivery over the last decade, while it remains unclear how the strength of adverse drug effect will be altered when a drug is loaded on the nanocarrier. Drug-induced phospholipidosis (DIP) is characterized with excessive accumulation of phospholipids in cells and is common for cationic amphiphilic drugs (CAD). Previously, we have reported that PEGylated graphene oxide (PEG-GO) loaded with several CAD can potentiate DIP. In current study, we extended our study on newly identified phospholipidosis (PLD) inducers that had been identified from the Library of Pharmacologically Active Compounds (LOPAC), to investigate if PEO-GO loaded with these CAD can alter DIP. Twenty-two CAD were respectively loaded on PEG-GO and incubated with RAW264.7, a macrophage cell line. The results showed that when a CAD was loaded on PEG-GO, its strength of PLD induction can be enhanced, unchanged or attenuated. PEG-GO loaded with Ifenprodil exhibited the highest PEG-GO potentiation effect compared to Ifenprodil treatment alone in RAW264.7 cells, and this effect was confirmed in human hepatocellular carcinoma HepG2, another cell line model for PLD induction. Primary hepatocyte culture and spheroids mimicking in vivo conditions were used to further validate nanocarrier potentiation on DIP by Ifenprodil. Stronger phospholipid accumulation was found in PEG-GO/Ifenprodil treated hepatocytes or spheroids than Ifenprodil treatment alone. Therefore, evidences were provided by us that nanocarriers may increase the adverse drug effects and guidance by regulatory agencies need to be drafted for the safe use of nanotechnology in drug delivery.

Exposure and nephrotoxicity concern of bismuth with the occurrence of autophagy.

Metal nanoparticles or metal-based compounds have drawn attention in various fields ranging from industry to medicine because of their unique physicochemical properties. Bismuth (Bi) compounds and nanomaterials have been commonly used in alloys, electronic industry, batteries, and as flame retardants as well as for anti- Helicobacter pylori therapy, while the nanomaterial form has great potential for computed tomography imaging and thermotherapy, both of which will be introduced in this review. Although Bi was used for several decades, there is a lack of detailed information concerning their toxicity and mechanisms on human health. We described the toxicity of Bi on the kidney that seemed to be relatively known by researchers, while the mechanisms remain unclear. Recently, our group has found that Bi compounds, including bismuth nitrate (BN) and Bi nanomaterials, can induce autophagy in kidney cells. We also extended our findings by selecting five Bi compounds, and the results showed that BN, bismuth oxychloride, bismuth citrate, colloidal bismuth subcitrate, and Bi nanomaterials all induced slight cytotoxicity accompanied with autophagy. Although the role of autophagy in Bi-induced cytotoxicity and kidney injury is under investigation by us, autophagy may help with the exploration of the mechanisms of nephrotoxicity by Bi.

Impacts of sodium hydroxide and sodium hypochlorite aging on polyvinylidene fluoride membranes fabricated with different methods.

This study compared the effects of chemical aging on the polyvinylidene fluoride (PVDF) membranes fabricated with the methods of non-solvent induced phase separation (NIPS) (named NIPS-PVDF) and thermally induced phase separation (TIPS) (named TIPS-PVDF). The chemical solutions of sodium hypochlorite (NaClO) and sodium hydroxide (NaOH) were chosen at the concentration of 5000mg/L. The equivalence of 5 and 10years was respectively selected as the time of aging. The physicochemical evolutions of membrane aging are characterized on the base of morphology analysis, chemical components, permeation ability and mechanical properties. The aging of NIPS-PVDF membrane led to the elimination of surface hydrophilic additives, while NaOH focused on the dehydrofluorination process resulting in the formation of conjugated chains of polyene on the skeleton structure. The chemical components of the surface of TIPS-PVDF membrane were removed continuously during the aging processes of both NaClO and NaOH, which was caused by the saponification of surface additives and the chain scissions of skeleton structure, but without producing any obvious conjugated chains of polyene. All the aging processes led to the increase of contact angle and the decrease of mechanical properties, and the permeability was reduced first and increased later due to the enlargement of surface membrane pores and membrane block. With the influence of membrane aging, selectivity of membrane was decreased (except coliform bacteria). At the beginning of filtration, the turbidity and particle count were at relatively high levels and declined with the filtration process.

Impact of polymeric membrane breakage on drinking water quality and an online detection method of the breakage.

Polymeric membrane has been widely used for the treatment of drinking water in China, and the total treating capacity has reached up to 3.8 million m3/d. However, the membrane breakage found in the membrane modules in many water treatment plants resulted in an increase in turbidity and bacterial amount in the membrane permeate. In this study, a membrane module running for 3 years in a full-scale application was examined in terms of the breaking positions and the numbers of the broken fibers. It was found that most of the breaking positions were mainly on the outlet side of the module and that the distance from these points to the outlet was about 1/10-2/10 length of the membrane module. The lab-scale tests showed that the increase of the numbers of the breaking fibers in the membrane module (the breaking fibers were from 1 to 4 of 75 fibers) resulted in the increase in turbidity, particle count and the amount of total bacteria and coliform bacteria. Meanwhile, the water quality after the filtration with broken membrane fibers was similar to the quality of the raw water, which indicated that once the membrane fiber breakage occurred in the membrane module, the quality of drinking water after membrane filtration was significantly affected. Furthermore, the breaking position closer to the outlet side of the membrane module exposed much higher microbiological risk than those in the middle or near the bottom side. A pilot scale test was conducted by using a membrane module with 6600 fibers, and the effect of the membrane breakage (1-4 broken fibers) on water quality was also investigated. The results indicated that periodical backwashing caused drastic fluctuation of turbidity, particle count and the bacterial amount in the permeate water, which might be due to the washing force and self-blocking action inside the hollow fibers. Moreover, there is a good quantitative relationship (R2 = 0.945) between particle count and the bacterial amount, which indicated that an online detection of particle count can be used to evaluate the bacterial risk. It was also suggested that the online detection of particle count after backwashing within 100 s would be a quick and precise method to identify any fiber breakage in time. These results are very important for the safety issue in the application of polymeric membrane to water treatment plants.

Spatial and temporal variations of water quality in an artificial urban river receiving WWTP effluent in South China.

Urban wastewater treatment plant (WWTP) effluent as reclaimed water provides an alternative water resource for urban rivers and effluent will pose a significant influence on the water quality of rivers. The objective of this study was to investigate the spatial and temporal variations of water quality in XZ River, an artificial urban river in Shenzhen city, Guangdong Province, China, after receiving reclaimed water from WWTP effluent. The water samples were collected monthly at different sites of XZ River from April 2013 to September 2014. Multivariate statistical techniques and a box-plot were used to assess the variations of water quality and to identify the main pollution factor. The results showed the input of WWTP effluent could effectively increase dissolved oxygen, decrease turbidity, phosphorus load and organic pollution load of XZ River. However, total nitrogen and nitrate pollution loads were found to remain at higher levels after receiving reclaimed water, which might aggravate eutrophication status of XZ River. Organic pollution load exhibited the lowest value on the 750 m downstream of XZ River, while turbidity and nutrient load showed the lowest values on the 2,300 m downstream. There was a higher load of nitrogen and phosphorus pollution in the dry season and at the beginning of wet season.

Effect of ozone on the performance of a hybrid ceramic membrane-biological activated carbon process.

Two hybrid processes including ozonation-ceramic membrane-biological activated carbon (BAC) (Process A) and ceramic membrane-BAC (Process B) were compared to treat polluted raw water. The performance of hybrid processes was evaluated with the removal efficiencies of turbidity, ammonia and organic matter. The results indicated that more than 99% of particle count was removed by both hybrid processes and ozonation had no significant effect on its removal. BAC filtration greatly improved the removal of ammonia. Increasing the dissolved oxygen to 30.0 mg/L could lead to a removal of ammonia with concentrations as high as 7.80 mg/L and 8.69 mg/L for Processes A and B, respectively. The average removal efficiencies of total organic carbon and ultraviolet absorbance at 254 nm (UV254, a parameter indicating organic matter with aromatic structure) were 49% and 52% for Process A, 51% and 48% for Process B, respectively. Some organic matter was oxidized by ozone and this resulted in reduced membrane fouling and increased membrane flux by 25%-30%. However, pre-ozonation altered the components of the raw water and affected the microorganisms in the BAC, which may impact the removals of organic matter and nitrite negatively.

Numerical model for electrogenic transport by the ATP-dependent potassium pump KdpFABC.

In vitro assays of ion transport are an essential tool for understanding molecular mechanisms associated with ATP-dependent pumps. Because ion transport is generally electrogenic, principles of electrophysiology are applicable, but conventional tools like patch-clamp are ineffective due to relatively low turnover rates of the pumps. Instead, assays have been developed to measure either voltage or current generated by transport activity of a population of molecules either in cell-derived membrane fragments or after reconstituting purified protein into proteoliposomes. In order to understand the nuances of these assays and to characterize effects of various operational parameters, we have developed a numerical model to simulate data produced by two relevant assays: fluorescence from voltage-sensitive dyes and current recorded by capacitive coupling on solid supported membranes. Parameters of the model, which has been implemented in Python, are described along with underlying principles of the computational algorithm. Experimental data from KdpFABC, a K+ pump associated with P-type ATPases, are presented, and model parameters have been adjusted to mimic these data. In addition, effects of key parameters such as nonselective leak conductance and turnover rate are demonstrated. Finally, simulated data are used to illustrate the effects of capacitive coupling on measured current and to compare alternative methods for quantification of raw data.

Highly integrated hybrid process with ceramic ultrafiltration-membrane for advanced treatment of drinking water: a pilot study.

This article presents a highly integrated hybrid process for the advanced treatment of drinking water in dealing with the micro-polluted raw water. A flat sheet ceramic membrane with the pore size of 50∼60 nm for ultrafiltration (UF) is used to integrate coagulation and ozonation together. At the same time, biological activated carbon filtration (BAC) is used to remove the ammonia and organic pollutants in raw water. A pilot study in the scale of 120 m(3)/d has been conducted in Southern China. The mainly-analyzed parameters include turbidity, particle counts, ammonia, total organic carbon (TOC), UV254, biological dissolved organic carbon (BDOC), dissolved oxygen (DO) as well as trans-membrane pressure (TMP). The experiments demonstrated that ceramic UF-membrane was able to remove most of turbidity and suspended particulate matters. The final effluent turbidity reached to 0.14 NTU on average. BAC was effective in removing ammonia and organic matters. Dissolved oxygen (DO) is necessary for the biodegradation of ammonia at high concentration. The removal efficiencies reached to 90% for ammonia with the initial concentration of 3.6 mg/L and 76% for TOC with the initial concentration of 3.8 mg/L. Ozonation can alter the molecular structure of organics in terms of UV254, reduce membrane fouling, and extend the operation circle. It is believed the hybrid treatment process developed in this article can achieve high performance with less land occupation and lower cost compared with the conventional processes. It is especially suitable for the developing countries in order to obtain high-quality drinking water in a cost-effective way.

Energy coupling and stoichiometry of Zn2+/H+ antiport by the prokaryotic cation diffusion facilitator YiiP.

YiiP from Shewanella oneidensis is a prokaryotic Zn2+/H+ antiporter that serves as a model for the Cation Diffusion Facilitator (CDF) superfamily, members of which are generally responsible for homeostasis of transition metal ions. Previous studies of YiiP as well as related CDF transporters have established a homodimeric architecture and the presence of three distinct Zn2+ binding sites named A, B, and C. In this study, we use cryo-EM, microscale thermophoresis and molecular dynamics simulations to address the structural and functional roles of individual sites as well as the interplay between Zn2+ binding and protonation. Structural studies indicate that site C in the cytoplasmic domain is primarily responsible for stabilizing the dimer and that site B at the cytoplasmic membrane surface controls the structural transition from an inward facing conformation to an occluded conformation. Binding data show that intramembrane site A, which is directly responsible for transport, has a dramatic pH dependence consistent with coupling to the proton motive force. A comprehensive thermodynamic model encompassing Zn2+ binding and protonation states of individual residues indicates a transport stoichiometry of 1 Zn2+ to 2-3 H+ depending on the external pH. This stoichiometry would be favorable in a physiological context, allowing the cell to use the proton gradient as well as the membrane potential to drive the export of Zn2+.

Enhanced H2O2 utilization efficiency in Fenton-like system for degradation of emerging contaminants: Oxygen vacancy-mediated activation of O2.

Hydrogen peroxide (H2O2) is the most commonly used oxidant in advanced oxidation processes for emerging organic contaminant degradation. However, the activation of H2O2 to generate reactive oxygen species is always accompanied by O2 generation resulting in H2O2 waste. Here, we prepare a Ti doped Mn3O4/Fe3O4 ternary catalyst (Ti-Mn3O4/Fe3O4) to create abundant oxygen vacancies (OVs), which yields electron delocalization impacts on enhancing the electrical conductivity, accelerating the activation of O2 to produce H2O2. In Ti-Mn3O4/Fe3O4/H2O2 system, OVs-mediated O2/O2•-/H2O2 redox cycles trigger the activation of locally generated O2, boost the regeneration of O2•- and on site produce H2O2 for replenishment. This leads to a 100% removal of tiamulin in 30 min at an unprecedented H2O2 utilization efficiency of 96.0%, which is 24 folds higher than that with Fe3O4/H2O2. Importantly, further integration of Ti-Mn3O4/Fe3O4 catalysts into membrane filtration achieved high rejections of tiamulin (> 83.9%) from real surface water during a continuous 12-h operation, demonstrating broad pH adaptability, excellent catalytic stability and leaching resistance. This work demonstrates a feasible strategy for developing OVs-rich catalysts for improving H2O2 utilization efficiency via activation of locally generated oxygen during the Haber-Weiss reaction.

Peroxymonosulfate activated by composite ceramic membrane for the removal of pharmaceuticals and personal care products (PPCPs) mixture: Insights of catalytic and noncatalytic oxidation.

A composite manganese-based catalytic ceramic membrane (Mn-CCM) was developed by a solid-state sintering method, and its effectiveness toward activation of peroxymonosulfate (PMS) for the degradation of 11 pharmaceutical and personal care products (PPCPs) mixture was tested. The optimized Mn-CCMs/PMS system showed remarkable degradation efficiencies for PPCPs mixture with total removal >90% in ultrapure water, river water and natural organic matter (NOM) solution. The Mn-CCMs/PMS system showed the contribution of different phenomena in PPCPs removal in the order of catalytic oxidation (54.7%, Mn-CCMs/PMS) > noncatalytic oxidation (42.3%, PMS oxidation) > adsorption (3.0%, by Mn-CCMs). The singlet oxygen (1O2) was the dominant reactive oxygen specie for the degradation of PPCPs in all water matrices proved by the quenching experiments and electro-paramagnetic resonance (EPR) spectroscopy. The extraordinary stability of Mn-CCMs for the activation of PMS has been noted in terms of repeatability experiments for PPCPs degradation with fewer leaching of Mn (1.9 to 3.6 µg/L). Mineralization was achieved in the range of 28-65% for different water matrices. The toxicity of the PPCPs mixture was reduced by 85.9%. The Mn-CCMs/PMS system showed a reduction (25-100%) in precursors of different carbon- and nitrogen-based disinfection by-products. This study found the Mn-CCMs/PMS system as a feasible purification unit for removing trace concentrations of PPCPs (ng/L) in real drinking water matrices.

Energy Coupling and Stoichiometry of Zn2+/H+ Antiport by the Cation Diffusion Facilitator YiiP.

YiiP is a prokaryotic Zn2+/H+ antiporter that serves as a model for the Cation Diffusion Facilitator (CDF) superfamily, members of which are generally responsible for homeostasis of transition metal ions. Previous studies of YiiP as well as related CDF transporters have established a homodimeric architecture and the presence of three distinct Zn2+ binding sites named A, B, and C. In this study, we use cryo-EM, microscale thermophoresis and molecular dynamics simulations to address the structural and functional roles of individual sites as well as the interplay between Zn2+ binding and protonation. Structural studies indicate that site C in the cytoplasmic domain is primarily responsible for stabilizing the dimer and that site B at the cytoplasmic membrane surface controls the structural transition from an inward facing conformation to an occluded conformation. Binding data show that intramembrane site A, which is directly responsible for transport, has a dramatic pH dependence consistent with coupling to the proton motive force. A comprehensive thermodynamic model encompassing Zn2+ binding and protonation states of individual residues indicates a transport stoichiometry of 1 Zn2+ to 2-3 H+ depending on the external pH. This stoichiometry would be favorable in a physiological context, allowing the cell to use the proton gradient as well as the membrane potential to drive the export of Zn2+.

Effect of membrane properties on the performance of a hybrid GAC and ultrafiltration process for water treatment.

The performance of a hybrid granular activated carbon (GAC) and ultrafiltration (UF) process for water treatment was investigated using five types of UF membranes. The removal percentages for chemical oxygen demand (COD(Mn)), particles (> or = 2 microm) and total bacteria by the hybrid process were 30-40%, 98-99% and 76-92%, respectively. No invertebrates were detected in the hybrid process effluent. Transmembrane pressure and specific permeate flux (SPF) of the five types of membranes varied. With decreasing membrane pore sizes, removal of COD(Mn) and particles increased, whereas SPF firstly decreased and then increased. Hydrophilic membranes had a relatively high COD(Mn) removal potential, but did not obviously affect particle removal or SPF.