Plant-derived flavonoids are a potential source of drugs for the treatment of liver fibrosis.

Liver fibrosis is a dynamic pathological process that can be triggered by any chronic liver injury. If left unaddressed, it will inevitably progress to the severe outcomes of liver cirrhosis or even hepatocellular carcinoma. In the past few years, the prevalence and fatality of hepatic fibrosis have been steadily rising on a global scale. As a result of its intricate pathogenesis, the quest for pharmacological interventions targeting liver fibrosis has remained a formidable challenge. Currently, no pharmaceuticals are exhibiting substantial clinical efficacy in the management of hepatic fibrosis. Hence, it is of utmost importance to expedite the development of novel therapeutics for the treatment of this condition. Various research studies have revealed the ability of different natural flavonoid compounds to alleviate or reverse hepatic fibrosis through a range of mechanisms, which are related to the regulation of liver inflammation, oxidative stress, synthesis and secretion of fibrosis-related factors, hepatic stellate cells activation, and proliferation, and extracellular matrix synthesis and degradation by these compounds. This review summarizes the progress of research on different sources of natural flavonoids with inhibitory effects on liver fibrosis over the last decades. The anti-fibrotic effects of natural flavonoids have been increasingly studied, making them a potential source of drugs for the treatment of liver fibrosis due to their good efficacy and biosafety.

Boosting the Methanol Oxidation Reaction Activity of Pt-Ru Clusters via Resonance Energy Transfer.

The sluggish kinetics of the methanol oxidation reaction (MOR) with PtRu electrocatalyst severely hinder the commercialization of direct methanol fuel cells (DMFCs). The electronic structure of Pt is of significant importance for its catalytic activity. Herein, it is reported that low-cost fluorescent carbon dots (CDs) can regulate the behavior of the D-band center of Pt in PtRu clusters through resonance energy transfer (RET), resulting in a significant increase in the catalytic activity of the catalyst participating in methanol electrooxidation. For the first time, the bifunction of RET is used to provide unique strategy for fabrication of PtRu electrocatalysts, not only tunes the electronic structure of metals, but also provides an important role in anchoring metal clusters. Density functional theory calculations further prove that charge transfer between CDs and Pt promotes the dehydrogenation of methanol on PtRu catalysts and reduces the free energy barrier of the reaction associated with the oxidation of CO* to CO2 . This helps to improve the catalytic activity of the systems participating in MOR. The performance of the best sample is 2.76 times higher than that of commercial PtRu/C (213.0 vs 76.99  mW cm - 2 mg Pt - 1 ${\rm{mW\ cm}}^{ - 2}{\rm{\ mg}}_{{\rm{Pt}}}^{ - 1}$ ). The fabricated system can be potentially used for the efficient fabrication of DMFCs.

Polysaccharide-Based Stimulus-Responsive Nanomedicines for Combination Cancer Immunotherapy.

Cancer immunotherapy is a promising antitumor approach, whereas nontherapeutic side effects, tumor microenvironment (TME) intricacy, and low tumor immunogenicity limit its therapeutic efficacy. In recent years, combination immunotherapy with other therapies has been proven to considerably increase antitumor efficacy. However, achieving codelivery of the drugs to the tumor site remains a major challenge. Stimulus-responsive nanodelivery systems show controlled drug delivery and precise drug release. Polysaccharides, a family of potential biomaterials, are widely used in the development of stimulus-responsive nanomedicines due to their unique physicochemical properties, biocompatibility, and modifiability. Here, the antitumor activity of polysaccharides and several combined immunotherapy strategies (e.g., immunotherapy combined with chemotherapy, photodynamic therapy, or photothermal therapy) are summarized. More importantly, the recent progress of polysaccharide-based stimulus-responsive nanomedicines for combination cancer immunotherapy is discussed, with the focus on construction of nanomedicine, targeted delivery, drug release, and enhanced antitumor effects. Finally, the limitations and application prospects of this new field are discussed.

Lignans as multi-targeted natural products in neurodegenerative diseases and depression: Recent perspectives.

As the global population ages, the treatment of neurodegenerative diseases is becoming more and more important. There is an urgent need to discover novel drugs that are effective in treating neurological diseases. In recent years, natural products and their biological activities have gained widespread attention. Lignans are a class of metabolites extensively present in Chinese herbal medicine and possess good pharmacological effects. Latest studies have demonstrated their neuroprotective pharmacological activity in preventing acute/chronic neurodegenerative diseases and depression. In this review, the pharmacological effects of these disorders, the pharmacokinetics, safety, and clinical trials of lignans were summarized according to the scientific literature. These results proved that lignans mainly exert antioxidant and anti-inflammatory activities. Anti-apoptosis, regulation of nervous system functions, and modulation of synaptic signals are also potential effects. Despite the substantial evidence of the neuroprotective potential of lignans, it is not sufficient to support their use in the clinical management. Our study suggests that lignans can be used as prospective agents for the treatment of neurodegenerative diseases and depression, with a view to informing their further development and utilization.

A scaffold of thermally activated delayed fluorescent polymer dots towards aqueous electrochemiluminescence and biosensing applications.

To achieve the most efficient, all-exciton-harvesting organic electrochemiluminescence (ECL) for biosensing, aqueous thermally activated delayed fluorescence (TADF)-ECL (aqueous TADF-ECL) was successfully launched to provide a breakthrough for the theoretical ECL efficiency limitation of aqueous fluorescence ECL (aqueous FL-ECL). However, achieving efficient TADF emitters suitable for aqueous TADF-ECL remains challenging. A previous strategy relied on TADF small molecular nanoparticles (NPs). However, the aggregation caused quenching of such TADF molecules within NPs is intense, which renders such NPs inefficient for ECL emission. Herein, we propose developing conjugated polymer dots (Pdots) based aqueous TADF-ECL. Compared to the intrinsic TADF polymer, the Pdots achieve a comparable TADF photophysical properties in water, i.e., the comparable PL spectra, similar PL quantum efficiency (ΦPL) and intense delayed fluorescent contributions via a fast reverse intersystem crossing rate (kRISC) of 1.5 × 106 s-1. The resultant relative ECL efficiency (ΦECL) of the oxidative-reduction ECL system (C2O42- as the co-reactant) is as high as 11.73% (vs. the Ru(bpy)32+ counterpart). Additionally, satisfactory dopamine biosensing was accomplished for such TADF-Pdots/C2O42- couple. All those results are combined to highlight the promising potential of such an aqueous TADF-ECL strategy.

High-efficiency peroxidase mimics for fluorescence detection of H2O2 and L-cysteine.

Enzyme-based sensing platforms have undergone rapid development in the field of diagnosis and bioanalysis. Here we present a novel fluorescent artificial enzyme-based detection strategy for L-cysteine (Cys) and H2O2 by fabricating a series of Au-Ag bimetallic nanoparticles with peroxidase-like activity. Taking advantage of the enhanced performance of catalysts by optimizing the surface structure, the sensitive detection of Cys with an ultralow detection limit of 0.035 µM and accurate quantification in the range of 0.075-2 µM were achieved. It was revealed that the mechanism of the catalytic process on the Au-Ag surface follows the electron transfer mechanism rather than active species, that is the peroxidase-like catalysts work as electron transfer intermediates and the electron transfer efficiency will increase with the larger electron cloud density of active sites derived from the electronic synergistic effect between Au and Ag, contributing to the enhanced catalytic activity of peroxidase mimics. This finding could provide guidance for the structural design of high-activity peroxidase mimics.

Unprecedented Dual Role of Polyaniline for Enhanced Pseudocapacitance of Cobalt-Iron Layered Double Hydroxide.

Creating nanosized pores in layered materials can increase the abundant active surface area and boost potential applications of energy storage devices. Herein, a unique synthetic strategy based on polyaniline (PANI) doped 2D cobalt-iron layered double hydroxide (CoFe-LDH/P) nanomaterials are designed, and the formation of pores at low temperature (80 °C) is developed. It is found that the optimized concentration of PANI creates the nanopores on the CoFe-LDH nanosheets among all other polymers. The well-ordered pores of CoFe-LDH/P allow the high accessibility of the redox-active sites and promote effective ion diffusion. The optimized CoFe-LDH/P2 cathode reveals a specific capacitance 1686 (1096 Cg-1 ) and 1200 Fg-1 (720 Cg-1 ) at 1 and 30 Ag-1 respectively, a high rate capability (71.2%), and a long cycle life (98% over 10 000 cycles) for supercapacitor applications. Charge storage analysis suggests that the CoFe-LDH/P2 electrode displays a capacitive-type storage mechanism (69% capacitive at 1 mV s-1 ). Moreover, an asymmetric aqueous supercapacitor (CoFe-LDH/P2//AC) is fabricated, delivering excellent energy density (75.9 Wh kg-1 at 1124 W kg-1 ) with outstanding stability (97.5%) over 10 000 cycles. This work opens a new avenue for designing porous 2D materials at low temperature for aqueous energy storage devices.

A Unique, Porous C3N4 Nanotube for Electrochemiluminescence with High Emission Intensity and Long-Term Stability: The Role of Calcination Atmosphere.

Developing excellent strategies to optimize the electrochemiluminescence (ECL) performance of C3N4 materials remains a challenge due to the electrode passivation, causing weak and unstable light emission. A strategy of controlling the calcination atmosphere was proposed to improve the ECL performance of C3N4 nanotubes. Interestingly, we found that calcination atmosphere played a key role in specific surface area, pore-size and crystallinity of C3N4 nanotubes. The C3N4 nanotubes prepared in the Air atmosphere (C3N4 NT-Air) possess a larger specific surface area, smaller pore-size and better crystallinity, which is crucial to improve ECL properties. Therefore, more C3N4•- excitons could be produced on C3N4 NT-Air, reacting with the SO4•- during the electrochemical reaction, which can greatly increase the ECL signal. Furthermore, when C3N4 nanotube/K2S2O8 system is proposed as a sensing platform, it offers a high sensitivity, and good selectivity for the detection of Cu2+, with a wide linear range of 0.25 nM~1000 nM and a low detection limit of 0.08 nM.

Polymer Electrochemiluminescence Featuring Thermally Activated Delayed Fluorescence.

Electrochemiluminescence (ECL) based on conjugated polymers or oligomers is persistently being pursued owing to its huge application scope ranging from ultra-sensitive bioanalysis to ultra-resolution imaging and spectroscopy. Because of the theoretical limit in radiative exciton generation yield (typically ∼25 %) of those polymers or oligomers, the corresponding ECL efficiency is still limited, which hampers its ECL performance and its related applications. Herein, we report ECL based on a thermally activated delayed fluorescence (TADF) polymer scaffold, which is characteristic of all-exciton harvesting in the ECL process, and thus potentially capable of achieving ∼100 % ECL efficiency. These desired properties of the TADF polymer ECL is attributed to a fast and efficient up-conversion process from non-radiative triplet to radiative singlet states under thermal activation, which is absent in conventional fluorescent polymers/oligomers, such as F8BT. In this study, various ECL modes, including annihilation or co-reactant mode using TPrA or S2 O82- as co-reactant, are confirmed for our model TADF polymer ECL system, which was different from fluorescent polymer ECL counterpart. Furthermore, solid-state ECL sensing on L-cysteine (an important marker of disease) is also evaluated by using the model TADF polymer. Ultralow detection limit in combination with high sensitivity and good specificity are achieved for this model system, indicative of a high potential of the TADF polymer scaffold for applications in the broad field of ECL.

Construction of Bimetallic Selenides Encapsulated in Nitrogen/Sulfur Co-Doped Hollow Carbon Nanospheres for High-Performance Sodium/Potassium-Ion Half/Full Batteries.

Metallic selenides have been widely investigated as promising electrode materials for metal-ion batteries based on their relatively high theoretical capacity. However, rapid capacity decay and structural collapse resulting from the larger-sized Na+ /K+ greatly hamper their application. Herein, a bimetallic selenide (MoSe2 /CoSe2 ) encapsulated in nitrogen, sulfur-codoped hollow carbon nanospheres interconnected reduced graphene oxide nanosheets (rGO@MCSe) are successfully designed as advanced anode materials for Na/K-ion batteries. As expected, the significant pseudocapacitive charge storage behavior substantially contributes to superior rate capability. Specifically, it achieves a high reversible specific capacity of 311 mAh g-1 at 10 A g-1 in NIBs and 310 mAh g-1 at 5 A g-1 in KIBs. A combination of ex situ X-ray diffraction, Raman spectroscopy, and transmission electron microscopy tests reveals the phase transition of rGO@MCSe in NIBs/KIBs. Unexpectedly, they show quite different Na+ /K+ insertion/extraction reaction mechanisms for both cells, maybe due to more sluggish K+ diffusion kinetics than that of Na+ . More significantly, it shows excellent energy storage properties in Na/K-ion full cells when coupled with Na3 V2 (PO4 )2 O2 F and PTCDA@450 °C cathodes. This work offers an advanced electrode construction guidance for the development of high-performance energy storage devices.

Rational Construction of 2D Fe3 O4 @Carbon Core-Shell Nanosheets as Advanced Anode Materials for High-Performance Lithium-Ion Half/Full Cells.

Transition metal oxides have vastly limited practical application as electrode materials for lithium-ion batteries (LIBs) due to their rapid capacity decay. Here, a versatile strategy to mitigate the volume expansion and low conductivity of Fe3 O4 by coating a thin carbon layer on the surface of Fe3 O4 nanosheets (NSs) was employed. Owing to the 2D core-shell structure, the Fe3 O4 @C NSs exhibit significantly improved rate performance and cycle capability compared with bare Fe3 O4 NSs. After 200 cycles, the discharge capacity at 0.5 A g-1 was 963 mA h g-1 (93 % retained). Moreover, the reaction mechanism of lithium storage was studied in detail by ex situ XRD and HRTEM. When coupled with a commercial LiFePO4 cathode, the resulting full cell retains a capacity of 133 mA h g-1 after 100 cycles at 0.1 A g-1 , which demonstrates its superior energy storage performance. This work provides guidance for constructing 2D metal oxide/carbon composites with high performance and low cost for the field of energy storage.

Fe/Fe3 C Nanoparticles Encapsulated in N-Doped Hollow Carbon Spheres as Efficient Electrocatalysts for the Oxygen Reduction Reaction over a Wide pH Range.

Nonprecious-metal-based electrocatalysts with low cost, high activity, and stability are considered as one of the most promising alternatives to Pt-based catalysts for the oxygen reduction reaction (ORR). Herein, an economical and easy-to-fabricate catalyst is developed, that is, Fe/Fe3 C embedded in N-doped hollow carbon spheres (Fe/Fe3 C/NHCS), which gave the half-wave potential of 0.84 V in 0.1 m KOH, similar to the commercial Pt/C catalyst. Surprisingly, the favorable ORR performance of the as-prepared catalyst was obtained in both acidic and neutral conditions with almost a four-electron pathway and low H2 O2 yield, which desirable the development of the proton exchange membrane (PEM) and microbial electrolysis cell (MEC) technology. Additionally, the obtained catalyst demonstrated better long-term stability and high methanol tolerance over a wide range of pH. These features could be mainly attributed to the synergistic effect between Fe/Fe3 C and Fe-Nx sites, the hollow structure with mesopores, and the well-dispersed Fe/Fe3 C nanoparticles owing to the existence of the abundant hydrophilic groups within the HCS precursor. As such, designing an efficient and cheap ORR catalyst that can operate at alkaline, acidic, and neutral solutions is highly desirable, yet challenging.

Investigation on pseudorabies prevalence in Chinese swine breeding farms in 2013-2016.

Pseudorabies (PR) has been prevalent in Chinese swine breeding farms since the outbreak at the end of 2011. For investigating current prevalence of PR, a nationwide surveillance has been performed in this study. The swine serum samples were collected from 93, 100, 92, and 91 swine farms in China during 2013-2016, respectively. Since the extensive use of gE-deleted pseudorabies virus (PRV) vaccine, we could apply the PRV-gE antibody for determining wild-type virus infection and the PRV-gB antibody for evaluating vaccine immunization. The results were concluded as follows: (1) Nationally, the positive rate of PRV-gB was maintained at a high level (> 90%), while the positive rate of PRV-gE continued to decrease (from 22.17 to 13.14%). (2) The positive rates of PRV-gE were greatly varied in different geographical regions and swine farms (0~100%), while the positive rate of PRV-gB was generally high (> 90%). (3) The number of imported PRV attenuated vaccines were about twice that of domestic PRV attenuated vaccines, while the positive rate of PRV-gB was not significantly different (P > 0.05). (4) The performance of PR eradication developing or developed farms was better than the performance of common farms, with higher positive rate of PRV-gB (> 90%) and much lower positive rate of PRV-gE (nearly 0%).

[Molecular subtyping and traceability analysis of Campylobacter jejuni isolated from chicken carcasses in slaughterhouses by FAFLP].

OBJECTIVE: To implement molecular subtyping and traceability analysis of Campylobacter jejuni isolated from chicken carcasses in slaughterhouses in some provinces. METHODS: A total of 72 Campylobacter jejuni strains were subtyped by fluorescent amplified fragment length polymorphism with Hind Ⅲ and Hha Ⅰ. After electrophoresis results were analyzed with Gene Marker V1. 80, Cluster analysis was performed by Bio Numerics software to further establish tracing analysis database of Campylobacter jejuni. RESULTS: 241 polymorphic fragments were yielded among 72 islolates, while most isolates gave 80 to 100 fragments. 72 FAFLP types were yielded among 72 strains with a resolution of 100%. According to 70% similarity, 72 strains were assigned to 11 clusters. The lowest similarity between clusters was 56. 9%, and the highest similarity was 94. 9%. According to 80% similarity, cluster A could be divided into 5 sub-clusters, and cluster B was divided into 15 sub-clusters. Strains in the same sub-cluster displayed complete regional homology. CONCLUSION: FAFLP is suitable for molecular subtyping andtraceability analysis of Campylobacter jejuni for its high resolution and good regional homology of cluster analysis.

Electronic-Structure Transformation of Platinum-Rich Nanowires as Efficient Electrocatalyst for Overall Water Splitting.

Platinum (Pt) has been widely used as cathodic electrocatalysts for the hydrogen evolution reaction (HER) but unfortunately neglected as an anodic electrocatalyst for the oxygen evolution reaction (OER) due to excessively strong bonding with oxygen species in water splitting electrolyzers. Herein we report that fine control over the electronic-structure and local-coordination environment of Pt-rich PtPbCu nanowires (NWs) by doping of iridium (Ir) lowers the overpotential of the OER and simultaneously suppresses the overoxidation of Pt in IrPtPbCu NWs during water electrolysis. In light of the one-dimensional morphology featured with atomically dispersed IrOx species and electronically modulated Pt-sites, the IrPtPbCu NWs exhibit an enhanced OER (175 mV at 10 mA cm-2) and HER (25 mV at 10 mA cm-2) electrocatalytic performance in acidic media and yield a high turnover frequency. For OER at the overpotential of 250 mV, the IrPtPbCu NWs show an enhanced mass activity of 1.51 A mg-1Pt+Ir (about 19 times higher) than Ir/C. For HER at the overpotential of 50 mV, NWs exhibit a remarkable mass activity of 1.35 A mg-1Pt+Ir, which is 2.6-fold relative to Pt/C. Experimental results and theoretical calculations corroborate that the doping of Ir in NWs has the capacity to suppress the formation of Ptx>4 derivates and ameliorate the adsorption free energy of reaction intermediates during the water electrolysis. This approach enabled the realization of a previously unobserved mechanism for anodic electrocatalysts.

Unveiling the Growth Mechanism of Ordered-Phase within Multimetallic Nanoplates.

Tuning the crystal phase of alloy nanocrystals (NCs) offers an alternative way to improve their electrocatalytic performance, but, how heterometals diffuse and form ordered-phase remains unclear. Herein, for the first time, the mechanism for forming tetrametallic ordered-phase nanoplates (NPLs) is unraveled. The observations reveal that the intermetallic ordered-phase nucleates through crystallinity alteration of the seeds and then propagates by reentrant grooves. Notably, the reentrant grooves act as intermediate NCs for ordered-phase, eventually forming intermetallic PdCuIrCo NPLs. These NPLs substantially outperform for oxygen evolution reaction (221 mV at 10 mA cm-2) and hydrogen evolution reaction (19 mV at 10 mA cm-2) compared to commercial Ir/C and Pd/C catalysts in acidic media. For OER at 1.53 V versus RHE, the PdCuIrCo/C exhibits an enhanced mass activity of 9.8 A mg-1 Pd+Ir (about ten times higher) than Ir/C. For HER at -0. 2 V versus RHE, PdCuIrCo/C shows a remarkable mass activity of 1.06 A mg-1 Pd+Ir, which is three-fold relative to Pd/C. These improvements can be ascribed to the intermetallic ordered-structure with high-valence Ir sites and tensile-strain. This approach enabled the realization of a previously unobserved mechanism for ordered-phase NCs. Therefore, this strategy of making ordered-phase NPLs can be used in diverse heterogeneous catalysis.

Higher-order Granger reservoir computing: simultaneously achieving scalable complex structures inference and accurate dynamics prediction.

Recently, machine learning methods, including reservoir computing (RC), have been tremendously successful in predicting complex dynamics in many fields. However, a present challenge lies in pushing for the limit of prediction accuracy while maintaining the low complexity of the model. Here, we design a data-driven, model-free framework named higher-order Granger reservoir computing (HoGRC), which owns two major missions: The first is to infer the higher-order structures incorporating the idea of Granger causality with the RC, and, simultaneously, the second is to realize multi-step prediction by feeding the time series and the inferred higher-order information into HoGRC. We demonstrate the efficacy and robustness of the HoGRC using several representative systems, including the classical chaotic systems, the network dynamical systems, and the UK power grid system. In the era of machine learning and complex systems, we anticipate a broad application of the HoGRC framework in structure inference and dynamics prediction.

Cyanuric Acid-Functionalized Perovskite Nanocrystals toward Low Interface Impedance, High Environmental Stability, and Superior Electrochemiluminescence.

Perovskite nanocrystals (PNs) have received much attention as luminescence materials in the field of electrochemiluminescence (ECL). However, as one key factor for determining the optoelectronic properties of the surface state of PNs, the surface passivation layer of PNs has enormous difficulty in simultaneously meeting the requirements of high ECL efficiency, conductivity, and stability. Herein, an effective surface modification strategy with cyanuric acid (CA) is used to solve such issue. As confirmed, the CA molecules are chemically anchored onto the surface of PNs via the Lewis interaction between π electrons of the triazine ring and the empty orbit of Pb2+. Benefiting from the above interaction, the electrochemical impedance of PNs is decreased greatly without the loss of light-emitting efficiency. Moreover, the stability of PNs under O2 exposure is improved by almost sixfold. These improvements are confirmed to be beneficial for enhancing the ECL behaviors of PNs under electrochemical operation. Upon cathode ECL driving conditions in aqueous media, the ECL intensity and efficiency of PNs are increased to 200 and 170%, respectively. This work provides a new modification strategy to holistically improve the ECL performance of PNs, which is instructive to exploring robust perovskite nanomaterials for electrochemical applications.

Solvent-Free Ultrafast Construction of Se-Deficient Heterojunctions of Bimetallic Selenides toward Flexible Sodium-Ion Full Batteries.

Flexible quasi-solid-state sodium ion batteries featuring their low-cost, high safety and excellent mechanical strength have attracted widespread interest in the field of wearable electronic devices. However, the development of such batteries faces great challenges including the construction of interfacial compatible flexible electrode materials and addressing the high safety demands of electrolyte. Here selenium-vacancies regulated bimetallic selenide heterojunctions anchored on waste cotton cloth-derived flexible carbon cloth (FCC) with robust interfacial C-Se-Co/Fe chemical bonds as a flexible anode material (CCFSF) is proposed by ultrafast microwave pyrolysis method. Rich selenium vacancies and CoSe2 /FeSe2-x heterostructures are synchronously formed that can significantly improve ionic and electronic diffusion kinetics. Additionally, a uniform carbon layer coating on the surface of Se-deficient heterostructures endows it with outstanding structural stability. The flexible cathode (PB@FCC) is also fabricated by directly growing Prussian blue nanoparticles on the FCC. Furthermore, an advanced flexible quasi-solid-state Na-ion pouch cell is assembled by coupling CCFSF anode, PB@FCC cathode with P(VDF-HFP)-based gel polymer electrolyte. The full cell not only demonstrates excellent energy storage performance but also robust mechanical flexibility and safety. The present work offers an effective avenue to achieve high safety flexible energy storage device, promoting the development of flexible wearable electronic devices.

Recombinant lentogenic Newcastle disease virus expressing Ebola virus GP infects cells independently of exogenous trypsin and uses macropinocytosis as the major pathway for cell entry.

BACKGROUND: Using reverse genetics, we generated a recombinant low-pathogenic LaSota strain Newcastle disease virus (NDV) expressing the glycoprotein (GP) of Ebola virus (EBOV), designated rLa-EBOVGP, and evaluated its biological characteristic in vivo and in vitro. RESULTS: The introduction and expression of the EBOV GP gene did not increase the virulence of the NDV vector in poultry or mice. EBOV GP was incorporated into the particle of the vector virus and the recombinant virus rLa-EBOVGP infected cells and spread within them independently of exogenous trypsin. rLa-EBOVGP is more resistant to NDV antiserum than the vector NDV and is moderately sensitive to EBOV GP antiserum. More importantly, infection with rLa-EBOVGP was markedly inhibited by IPA3, indicating that rLa-EBOVGP uses macropinocytosis as the major internalization pathway for cell entry. CONCLUSIONS: The results demonstrate that EBOV GP in recombinant NDV particles functions independently to mediate the viral infection of the host cells and alters the cell-entry pathway.