[A multi-center epidemiological study on pneumococcal meningitis in children from 2019 to 2020]. / 2019­2020å¹´160ä¾‹å„¿ç«¥è‚ºç‚Žé“¾çƒèŒè„‘è†œç‚Žä¸´åºŠæµè¡Œç— å­¦å¤šä¸­å¿ƒç ”ç©¶.

OBJECTIVES: To investigate the clinical characteristics and prognosis of pneumococcal meningitis (PM), and drug sensitivity of Streptococcus pneumoniae (SP) isolates in Chinese children. METHODS: A retrospective analysis was conducted on clinical information, laboratory data, and microbiological data of 160 hospitalized children under 15 years old with PM from January 2019 to December 2020 in 33 tertiary hospitals across the country. RESULTS: Among the 160 children with PM, there were 103 males and 57 females. The age ranged from 15 days to 15 years, with 109 cases (68.1%) aged 3 months to under 3 years. SP strains were isolated from 95 cases (59.4%) in cerebrospinal fluid cultures and from 57 cases (35.6%) in blood cultures. The positive rates of SP detection by cerebrospinal fluid metagenomic next-generation sequencing and cerebrospinal fluid SP antigen testing were 40% (35/87) and 27% (21/78), respectively. Fifty-five cases (34.4%) had one or more risk factors for purulent meningitis, 113 cases (70.6%) had one or more extra-cranial infectious foci, and 18 cases (11.3%) had underlying diseases. The most common clinical symptoms were fever (147 cases, 91.9%), followed by lethargy (98 cases, 61.3%) and vomiting (61 cases, 38.1%). Sixty-nine cases (43.1%) experienced intracranial complications during hospitalization, with subdural effusion and/or empyema being the most common complication [43 cases (26.9%)], followed by hydrocephalus in 24 cases (15.0%), brain abscess in 23 cases (14.4%), and cerebral hemorrhage in 8 cases (5.0%). Subdural effusion and/or empyema and hydrocephalus mainly occurred in children under 1 year old, with rates of 91% (39/43) and 83% (20/24), respectively. SP strains exhibited complete sensitivity to vancomycin (100%, 75/75), linezolid (100%, 56/56), and meropenem (100%, 6/6). High sensitivity rates were also observed for levofloxacin (81%, 22/27), moxifloxacin (82%, 14/17), rifampicin (96%, 25/26), and chloramphenicol (91%, 21/23). However, low sensitivity rates were found for penicillin (16%, 11/68) and clindamycin (6%, 1/17), and SP strains were completely resistant to erythromycin (100%, 31/31). The rates of discharge with cure and improvement were 22.5% (36/160) and 66.2% (106/160), respectively, while 18 cases (11.3%) had adverse outcomes. CONCLUSIONS: Pediatric PM is more common in children aged 3 months to under 3 years. Intracranial complications are more frequently observed in children under 1 year old. Fever is the most common clinical manifestation of PM, and subdural effusion/emphysema and hydrocephalus are the most frequent complications. Non-culture detection methods for cerebrospinal fluid can improve pathogen detection rates. Adverse outcomes can be noted in more than 10% of PM cases. SP strains are high sensitivity to vancomycin, linezolid, meropenem, levofloxacin, moxifloxacin, rifampicin, and chloramphenicol.

The Defects, Physicochemical Properties, and Surface Charge of MIL-88A (Al) Crystal Were Regulated for Highly Efficient Removal of Anionic Dyes: Preparation, Characterization, and Adsorption Mechanism.

In this paper, the physicochemical properties, surface charge, and crystal defects of MIL-88A (Al) were controlled by adjusting the ratio of metal ligands and temperature in the synthetic system without the addition of surfactants. The adsorption properties of different crystals for Congo red (CR) were studied. Among them, MIL-88A (Al)-130 and MIL-88A (Al)-d have the best adsorption properties. The maximum adsorption capacities are 600.8 and 1167 mg · g-1, respectively. Compared with MIL-88A (Al)-130, the adsorption performance of MIL-88A (Al)-d was increased by 94.2%, and the adsorption rate was increased by about 4 times. It can be seen that increasing the proportion of metal ligands within a certain range will improve the adsorption capacity. The structure and morphology of the adsorbent were characterized by XRD, FTIR, SEM, EDS, TGA, BET, and zeta potential. The effects of time, temperature, pH, initial solution concentration, and dosage on CR adsorption properties were systematically discussed. The pseudo-second-order kinetic model and Langmuir isothermal model can well describe the adsorption process, which indicates that the adsorption process is a single-layer chemisorption occurring on a uniform surface. According to thermodynamics, this adsorption is an endothermic process. The mechanism of CR removal is proposed as the electrostatic attraction, hydrogen bond, metal coordination effect, π-π conjugation, crystal defect, and pore-filling effect. In addition, MIL-88A (Al)-d has good repeatability, indicating that it is a good material for treating anionic dye wastewater.

Predictive models for sepsis in children with Staphylococcus aureus bloodstream infections: a retrospective cohort study.

BACKGROUND: The presence of Staphylococcus aureus in the bloodstream can lead to the development of sepsis; however, the severity and risk factors of the systemic inflammatory response to Staphylococcus aureus bloodstream infections were unclear. This study is aimed to build a model to predict the risk of sepsis in children with Staphylococcus aureus bloodstream infections. METHODS: A retrospective analysis of hospitalized pediatric patients diagnosed with Staphylococcus aureus bloodstream infections was performed between January 2013 and December 2019. Each patient was assessed using the pediatric version of the Sequential Organ Failure Assessment score (pSOFA) within 24 h of blood culture collection. A nomogram based on logistic regression models was constructed to predict the risk factors for sepsis in children with Staphylococcus aureus bloodstream infections. It was validated using the area under the receiver-operating characteristic curve (AUC). RESULTS: Of the 94 patients included in the study, 35 cases (37.2%) developed sepsis. The pSOFA scores ranged from 0 to 8, with 35 patients having a pSOFA score of ≥ 2. Six children (6.4%) died within 30 days, who were all from the sepsis group and had different pSOFA scores. The most common organs involved in sepsis in children with staphylococcal bloodstream infections were the neurologic system (68.6%), respiratory system (48.6%), and coagulation system (45.7%). Hospital-acquired infections (adjusted odds ratio [aOR], 3.0; 95% confidence interval [CI], 1.3-7.2), implanted catheters (aOR, 10.4; 95% CI, 3.8-28.4), procalcitonin level ≥ 1.7 ng/mL (aOR, 15.4; 95% CI, 2.7-87.1), and underlying diseases, especially gastrointestinal malformations (aOR, 14.0; 95% CI, 2.9-66.7) were associated with Staphylococcus aureus sepsis. However, methicillin-resistant Staphylococcus aureus infection was not a risk factor for sepsis. The nomogram had high predictive accuracy for the estimation of sepsis risk, with an AUC of 0.85. CONCLUSIONS: We developed a predictive model for sepsis in children with Staphylococcus aureus infection.

Clinical profiles and antimicrobial resistance patterns of invasive Salmonella infections in children in China.

Invasive Salmonella infections result in a significant burden of disease including morbidity, mortality, and financial cost in many countries. Besides typhoid fever, the clinical impact of non-typhoid Salmonella infections is increasingly recognized with the improvement of laboratory detection capacity and techniques. A retrospective multicenter study was conducted to analyze the clinical profiles and antimicrobial resistance patterns of invasive Salmonella infections in hospitalized children in China during 2016-2018. A total of 130 children with invasive Salmonella infections were included with the median age of 12 months (range: 1-144 months). Seventy-nine percent of cases occurred between May and October. Pneumonia was the most common comorbidity in 33 (25.4%) patients. Meningitis and septic arthritis caused by nontyphoidal Salmonella (NTS) infections occurred in 12 (9.2%) patients and 5 (3.8%) patients. Patients < 12 months (OR: 16.04) and with septic shock (OR: 23.4), vomit (OR: 13.33), convulsion (OR: 15.86), C-reactive protein (CRP) ≥ 40 g/L (OR: 5.56), and a higher level of procalcitonin (PCT) (OR: 1.05) on admission were statistically associated to an increased risk of developing meningitis. Compared to 114 patients with NTS infections, 16 patients with typhoid fever presented with higher levels of CRP and PCT (P < 0.05). The rates of resistance to ampicillin, sulfamethoxazole/trimethoprim, ciprofloxacin, and ceftriaxone among Salmonella Typhi and NTS isolates were 50% vs 57.3%, 9.1% vs 24.8%, 0% vs 11.2%, and 0% vs 9.9%, respectively. NTS has been the major cause of invasive Salmonella infections in Chinese children and can result in severe diseases. Antimicrobial resistance among NTS was more common.

[Clinical features of 19 children infected with the Omicron variant of severe acute respiratory syndrome coronavirus 2 in Hangzhou, China]. / 杭州市19ä¾‹æ–°åž‹å† çŠ¶ç— æ¯’Omicronå˜å¼‚æ ªæ„ŸæŸ“å„¿ç«¥çš„ä¸´åºŠç‰¹å¾.

OBJECTIVES: To study the clinical features of children infected with the Omicron variant of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). METHODS: The medical data of 19 children who were diagnosed with SARS-CoV-2 Omicron variant infection from January 28 to March 3, 2022 in Hangzhou were retrospectively reviewed. RESULTS: Among the 19 children, there were 7 boys (37%) and 12 girls (63%), and their age ranged from 6 months to 16 years, with a median age of 2 years and 1 month. Most of these children were infants and young children (aged ≤3 years, accounting for 53%). Among these children, 11 (58%) were unvaccinated with SARS-CoV-2 vaccine and 8 (42%) were vaccinated with SARS-CoV-2 vaccine, and 3 children (16%) had a history of underlying diseases. All 19 children had a clear history of close contact with persons infected with SARS-CoV-2, and 10 children (53%) were involved in the cluster outbreak in a maternal and infant care center. In terms of clinical classification, 13 children (68%) had mild coronavirus disease 2019 (COVID-19) and 6 (32%) had common COVID-19, with no severe cases of COVID-19. The most common clinical symptoms were cough (100%) and fever (63%). The children with a normal peripheral white blood cell count accounted for 84%, and those with a normal lymphocyte count accounted for 68%. There were no significant abnormalities in platelet count, procalcitonin, liver function parameters (alanine aminotransferase and aspartate aminotransferase), and renal function parameters (creatinine and urea). Six children (32%) had obvious signs of pneumonia on chest CT. All 19 children were given symptomatic treatment, and 12 children (63%) were given aerosol inhalation of interferon α. All children were cured and discharged. CONCLUSIONS: Children infected with Omicron variant strains are more common in infants and young children, with mild symptoms and good prognosis. Most of the children have a history of close contact with persons infected with SARS-CoV-2, and epidemic prevention and control should be strengthened in places with many infants and children, such as maternal and infant care centers.

Cobalt Single Atoms Embedded in Nitrogen-Doped Graphene for Selective Oxidation of Benzyl Alcohol by Activated Peroxymonosulfate.

The development of novel single atom catalyst (SAC) is highly desirable in organic synthesis to achieve the maximized atomic efficiency. Here, a Co-based SAC on nitrogen-doped graphene (SACo@NG) with high Co content of 4.1 wt% is reported. Various characterization results suggest that the monodispersed Co atoms are coordinated with N atoms to form robust and highly effective catalytic centers to activate peroxymonosulfate (PMS) for organic selective oxidation. The catalytic performance of the SACo@NG/PMS system is conducted on the selective oxidation of benzyl alcohol (BzOH) showing high efficiency with over 90% conversion and benzaldehyde selectivity within 180 min under mild conditions. Both radical and non-radical processes occurred in the selective oxidation of BzOH, but the non-radical oxidation plays the dominant role which is accomplished by the adsorption of BzOH/PMS on the surface of SACo@NG and the subsequent electron transfer through the carbon matrix. This work provides new insights to the preparation of efficient transition metal-based single atom catalysts and their potential applications in PMS mediated selective oxidation of alcohols.

Microbiological profiles and antimicrobial resistance patterns of pediatric bloodstream pathogens in China, 2016-2018.

OBJECTIVES: This study aimed to investigate the microbiological profiles and antimicrobial resistance patterns of bloodstream pathogens in Chinese children. METHODS: This retrospective study was conducted at 13 tertiary hospitals in China during 2016-2018. The first bloodstream isolates of the same species from one pediatric patient < 18 years were included to this study for analysis. Antimicrobial susceptibility testing was determined based on minimum inhibitory concentrations or Kirby-Bauer disk diffusion methods according to the 2018 Clinical and Laboratory Standards Institute guidelines. RESULTS: Overall, 9345 nonduplicate bloodstream isolates were collected. Top 10 pathogens included Coagulase-negative staphylococcus (CoNS) (44.4%), Escherichia coli (10.2%), Klebsiella pneumoniae (5.9%), Staphylococcus aureus (5.0%), Streptococcus pneumoniae (4.9%), Pseudomonas aeruginosa(2.8%), Enterococcus faecium (2.7%), Stenotrophomonas maltophilia (2.4%), Salmonella spp. (2.3%), and Streptococcus agalactiae (2.0%). The commonest pathogens apart from CoNS in age group 0-28 days, 29 days-2 months, 3-11 months, 1-5 years, and ≥ 5 years were Escherichia coli (17.2%), Escherichia coli (14.0%), Escherichia coli (7.9%), Streptococcus pneumoniae (10.7%) ,and Staphylococcus aureus (13.6%), respectively. The overall prevalence of extended-spectrum ß-lactamases-producing Enterobacteriaceae, carbapenem-resistant Klebsiella pneumoniae, carbapenem-resistant Acinetobacter baumannii, and carbapenem-resistant Pseudomonas aeruginosa were 41.4, 28.4, 31.7, and 5.6%, respectively. The overall prevalence of methicillin-resistant Staphylococcus aureus, penicillin-resistant Streptococcus pneumoniae and vancomycin-resistant Enterococcus was 38.1, 28.3, and 0.7%, respectively. CONCLUSIONS: The major bacterial pathogens have differences in different age groups, ward types, and regions in Chinese children, and the commonest causing microorganism was the Escherichia coli, especially in neonates and infants. High prevalence of important resistant phenotypes is of a serious concern.

Antibiotics prescription for targeted therapy of pediatric invasive pneumococcal diseases in China: a multicenter retrospective study.

BACKGROUND: Streptococcus pneumoniae (S. pneumoniae) is a major cause of bacterial meningitis, septicemia and pneumonia in children. Inappropriate choice of antibiotic can have important adverse consequences for both the individual and the community. Here, we focused on penicillin/cefotaxime non-susceptibility of S. pneumoniae and evaluated appropriateness of targeted antibiotic therapy for children with IPD (invasive pneumococcal diseases) in China. METHODS: A multicenter retrospective study was conducted in 14 hospitals from 13 provinces in China. Antibiotics prescription, clinical features and resistance patterns of IPD cases from January 2012 to December 2017 were collected. Appropriateness of targeted antibiotics therapy was assessed. RESULTS: 806 IPD cases were collected. The non-susceptibility rates of S. pneumoniae to penicillin and cefotaxime were 40.9% and 20.7% respectively in 492 non-meningitis cases, whereas those were 73.2% and 43.0% respectively in 314 meningitis cases. Carbapenems were used in 21.3% of non-meningitis cases and 42.0% of meningitis cases for targeted therapy. For 390 non-meningitis cases with isolates susceptible to cefotaxime, vancomycin and linezolid were used in 17.9% and 8.7% of cases respectively for targeted therapy. For 179 meningitis cases with isolates susceptible to cefotaxime, vancomycin and linezolid were prescribed in 55.3% and 15.6% of cases respectively. Overall, inappropriate targeted therapies were identified in 361 (44.8%) of 806 IPD cases, including 232 (28.8%) cases with inappropriate use of carbapenems, 169 (21.0%) cases with inappropriate use of vancomycin and 62 (7.7%) cases with inappropriate use of linezolid. CONCLUSIONS: Antibiotic regimens for IPD definite therapy were often excessive with extensive prescription of carbapenems, vancomycin or linezolid in China. Antimicrobial stewardship programs should be implemented to improve antimicrobial use.

Theoretical Calculation Guided Design of Single-Atom Catalysts toward Fast Kinetic and Long-Life Li-S Batteries.

Lithium-sulfur (Li-S) batteries are promising next-generation energy storage technologies due to their high theoretical energy density, environmental friendliness, and low cost. However, low conductivity of sulfur species, dissolution of polysulfides, poor conversion from sulfur reduction, and lithium sulfide (Li2S) oxidation reactions during discharge-charge processes hinder their practical applications. Herein, under the guidance of density functional theory calculations, we have successfully synthesized large-scale single atom vanadium catalysts seeded on graphene to achieve high sulfur content (80 wt % sulfur), fast kinetic (a capacity of 645 mAh g-1 at 3 C rate), and long-life Li-S batteries. Both forward (sulfur reduction) and reverse reactions (Li2S oxidation) are significantly improved by the single atom catalysts. This finding is confirmed by experimental results and consistent with theoretical calculations. The ability of single metal atoms to effectively trap the dissolved lithium polysulfides (LiPSs) and catalytically convert the LiPSs/Li2S during cycling significantly improved sulfur utilization, rate capability, and cycling life. Our work demonstrates an efficient design pathway for single atom catalysts and provides solutions for the development of high energy/power density Li-S batteries.

Identifying the Intrinsic Relationship between the Restructured Oxide Layer and Oxygen Evolution Reaction Performance on the Cobalt Pnictide Catalyst.

Cobalt pnictides show good catalytic activity and stability on oxygen evolution reaction (OER) behaviors in a strong alkaline solution. Identifying the intrinsic composition/structure-property relationship of the oxide layer on the cobalt pnictides is critical to design better and cheaper electrocatalysts for the commercial viability of OER technologies. In this work, the restructured oxide layer on the cobalt pnictides and its effect on the activity and mechanism for OER is systematically analyzed. In-situ electrochemical impedance spectroscopy (EIS) and near edge x-ray absorption fine structure (NEXAFS) spectra indicate that a higher OER performance of cobalt pnictides than Co3 O4 is attributed to the more structural disorder and oxygen defect sites in the cobalt oxide layer evolved from cobalt pnictides. Using angle resolved x-ray photoelectron spectroscopy (AR-XPS) further demonstrates that the oxygen defect sites mainly concentrate on the subsurface of cobalt oxide layer. The current study demonstrated promising opportunities for further enhancing the OER performance of cobalt-based electrocatalysts by controlling the subsurface defects of the restructured active layer.

Pediatric Antibiotic Prescribing in China According to the 2019 World Health Organization Access, Watch, and Reserve (AWaRe) Antibiotic Categories.

OBJECTIVES: To assess clinical indication-specific antibiotic prescribing in pediatric practice in China based on the World Health Organization (WHO) Access, Watch, and Reserve (AWaRe) metrics and to detect potential problem areas. STUDY DESIGN: Pediatric prescription records on the 16th of each month during 2018 were sampled for all encounters at outpatient and emergency departments of 16 tertiary care hospitals via hospital information systems. Antibiotic prescribing patterns were analyzed across and within diagnostic conditions according to WHO AWaRe metrics and Anatomical Therapeutic Chemical (ATC) classification. RESULTS: A total of 260 001 pediatric encounters were assessed, and antibiotics were prescribed in 94 453 (36.3%). In 35 167 encounters (37.2%), at least 1 intravenous antibiotic was administered. WHO Watch group antibiotics accounted for 82.2% (n = 84 176) of all antibiotic therapies. Azithromycin (n = 15 791; 15.4%) was the most commonly prescribed antibiotic, and third-generation cephalosporins (n = 44 387; 43.3%) were the most commonly prescribed antibiotic class. In at least 66 098 encounters (70.0%), antibiotics were prescribed for respiratory tract conditions, mainly for bronchitis/bronchiolitis (n = 25 815; 27.3%), upper respiratory tract infection (n = 25 184; 26.7%), and pneumonia (n = 13 392; 14.2%). CONCLUSIONS: Overuse and misuse of WHO Watch group antibiotics for respiratory tract conditions and viral infectious diseases is common in pediatric outpatients in China. Pediatric antimicrobial stewardship should be strengthened using WHO AWaRe metrics.

A novel method for periapical microsurgery with the aid of 3D technology: a case report.

BACKGROUND: Three-dimensional (3D) technology has gained wide acceptance in dentistry. It has been used for treatment planning and surgical guidance. This case report presented a novel treatment approach to remove cortical bone and root-end during periapical surgery with the help of Cone-Beam Computed Tomography (CBCT), Computer Aided Design (CAD) and three-dimensional (3D) printing technology. CASE PRESENTATION: A 37-year-old female patient presented with a large periapical lesion of left maxillary lateral incisor and canine was referred for microsurgical endodontic surgery. The data acquired from a preoperative diagnostic CBCT scan and an intra-oral scan was uploaded into surgical planning software and matched. A template that could be used to locate root-ends and lesion areas was virtually designed based on the data and was fabricated using a 3D printer. With the guidance of the template, the overlying cortical bone and root-end were precisely removed by utilizing a trephine with an external diameter of 4.0 mm. The patient was clinically asymptomatic at a six-month follow-up review. One year after the surgery, the lesion was healing well and no periapical radiolucency was observed on radiographic examination. CONCLUSIONS: The digitally designed directional template worked in all aspects to facilitate the periapical surgery as anticipated. The root-ends were accurately located and resected. The surgical procedure was simplified, and the treatment efficiency was improved. This technique minimized the damage and reduced iatrogenic injury.

Direct resin composite restoration of maxillary central incisors using a 3D-printed template: two clinical cases.

BACKGROUND: Three-dimensional (3D) printing technology is used widely in dentistry for applications including implant surgery, oral and maxillofacial surgery, orthognathic surgery, endodontics and prosthodontics. Using a 3D-printed template makes performing the repair procedure faster and more convenient. The aesthetic restoration of anterior teeth can recover facial beauty, enhance speaking and chewing functions and improve the quality of life of the patient. CASE PRESENTATION: This article describes two kinds of clinical cases including fractured teeth and dental caries. In both, a 3D-printed template was used for direct resin composite restoration of maxillary central incisors. A 3D-printed template was built using the following 3-step process: data acquisition was conducted via intra-oral scanning, virtual modeling was performed using an imaging process, and manufacturing was performed using a 3D printer. Aesthetically restoring the maxillary incisors with the assistance of the 3D-printed template achieved the anticipated results, and the patients were very satisfied with the effect. CONCLUSIONS: The direct resin composite restoration of maxillary central incisors using a 3D-printed template represents a rapid, convenient, aesthetic and functional option for treating maxillary central incisors. A 3D-printed template is therefore an acceptable and reliable alternative to traditional direct composite restoration of maxillary central incisors including fractured teeth and dental caries.

Single atom manganese catalyst boosting selective oxidation of alcohols with activated peroxymonosulfate.

Selective oxidations are important reactions in organic synthesis for fine chemical industry and conventional methods are expensive and produce a lot of toxic wastes. Herein, we demonstrate a facile and environmentally benign technique for liquid phase selective oxidation based on graphene-supported Mn single-atom-catalyst (SAMn-G) for efficient peroxymonosulfate (PMS) activation. The active Mn component in the developed SAMn-G catalyst reached single-atomic dispersion on graphene substrate via the coordination of individual Mn atoms with the doped N from the graphene framework. SAMn-G activated PMS via a nonradical-dominated pathway, which could convert aromatic alcohols into aldehydes or ketones at a mild temperature. The SAMn-G catalyst exhibited superior conversion and aldehyde selectivity in alcohol oxidation in comparison with their counterpart catalysts possessing either homogeneous Mn ions or oxide particles. The high activation efficiency of SAMn-G is due to the synergistic effect between Mn atoms and graphene substrate, as well as the dominated reaction pathway from nonradical oxidation, which is more selective than these free radicals to oxidize the alcohols. Concerted experimental evidence indicates that the non-radical oxidation process was highly possible to follow the electron transfer mechanism by PMS/organic adsorption on the surface of the catalyst. This study provides a fundamental understanding of PMS activation mediated by single atom catalyst for organic synthesis and the achieved insights can also help the catalyst design for other liquid phase selective oxidation processes.

Polydopamine coating for enhanced electrostatic adsorption of methylene blue by multiwalled carbon nanotubes in alkaline environments.

The removal of dye molecules in alkaline environments is an issue that should receive increased attention. In this study, the interaction mechanism between polydopamine-modified multiwalled carbon nanotubes (P-MWCNTs) and multiwalled carbon nanotubes (MWCNTs) with the cationic dye methylene blue (MB) in alkaline environments was explained in depth by adsorption, spectroscopy, and density functional theory (DFT). The mechanism of action and dominant forces between the adsorbent and adsorbate were analyzed graphically by introducing energy decomposition analysis (EDA) and an independent gradient model (IGM) into the DFT calculations. In addition, the force distribution was investigated through an isosurface. Moreover, batch adsorption studies were conducted to evaluate the performance of MWCNTs and P-MWCNTs for MB removal in alkaline environments. The maximum MB adsorption capacities of the MWCNTs and P-MWCNTs in solution were 113.3 mg‧g-1 and 230.4 mg‧g-1, respectively, at pH 9. The IGM and EDA showed that the better adsorption capacity of the P-MWCNTs originated from the enhancement of the electrostatic effect by the proton dissociation of polydopamine. Moreover, the adsorption of MB by MWCNTs and P-MWCNTs in alkaline environments was governed by dispersion and electrostatic effects, respectively. Through this study, it is hoped that progress will be made in the use of DFT to explore the mechanism of adsorbent-adsorbate interactions.

High-efficient removal of anionic dye from aqueous solution using metal-organic frameworks@chitosan aerogel rich in benzene structure.

With the exponentially increase of dye pollutants, the purification of dye wastewater has been an urgent ecological problem. As a novel type of porous adsorbent, metal-organic frameworks still face challenges in recyclability, agglomeration, and environmentally unfriendly synthesis. Herein, MOF-525 was in-situ growth onto the surface of the chitosan (CS) beads to fabricate MOF-525@CS aerogel. CS was utilized as substrate to uniformly disperse MOF-525, thereby significantly mitigating agglomeration and improving recyclability of MOF-525. The characterization results shown that MOF-525@CS aerogel had a high specific surface area of 103.0 m2·g-1, and MOF-525 was uniformly distributed in the 3D porous structure of CS, and the presence of benzoic acid was detected. The MOF-525@CS aerogel had a remarkable adsorption capacity of 1947 mg·g-1 for Congo red, which is greater than the sum of its parts. MOF-525@CS aerogel also inherited the rapid adsorption ability of MOF-525, removing 80 % of Congo red within 600 min. Such excellent adsorption performance can be attributed to the benzoic acid trapped by CS via CN band to enhance the π-π stacking interactions. Additionally, the utilization of benzoic acid makes the synthesis process of MOF-525@CS aerogel more environmentally friendly. The high-efficient MOF-525@CS aerogel is a competitive candidate for dye pollution adsorption.

Efficient adsorption of radioactive iodine by covalent organic framework/chitosan aerogel.

Radioactive iodine is considered one of the most dangerous radioactive elements in nuclear waste. Therefore, effective capture of radioactive iodine is essential for developing and using nuclear energy to solve the energy crisis. Some materials that have been developed for removing radioactive iodine still suffer from complex synthesis, low removal capacity, and non-reusability. Herein, covalent organic framework (COF)/chitosan (CS) aerogels were prepared using vacuum freeze-drying, and the COF nanoparticles were tightly attached on the green biomass material CS networks. Due to the synergistic effect of both COF and CS, the composite aerogel shows a three-dimensional porous and stable structure in the recycle usage. The COF/CS aerogel exhibits excellent iodine adsorption capacity of 2211.58 mg g-1 and 5.62 g g-1 for static iodine solution and iodine vapor, respectively, better than some common adsorbents. Furthermore, COF/CS aerogel demonstrated good recyclability performance with 87 % of the initial adsorption capacity after 5 cycles. In addition, the interaction between iodine and imine groups, amino groups, and benzene rings of aerogel are the possible adsorption mechanisms. COF/CS aerogel has excellent adsorption properties, good chemical stability, and reusable performance, which is a potential and efficient adsorbent for industrial radioactive iodine adsorption from nuclear waste.

Visualization enhancement by PCA-based image fusion for skin burns assessment in polarization-sensitive OCT.

Polarization-sensitive optical coherence tomography (PS-OCT) is a functional imaging tool for measuring tissue birefringence characteristics. It has been proposed as a potentially non-invasive technique for evaluating skin burns. However, the PS-OCT modality usually suffers from high system complexity and relatively low tissue-specific contrast, which makes assessing the extent of burns in skin tissue difficult. In this study, we employ an all-fiber-based PS-OCT system with single-state input, which is simple and efficient for skin burn assessment. Multiple parameters, such as phase retardation (PR), degree of polarization uniformity (DOPU), and optical axis orientation, are obtained to extract birefringent features, which are sensitive to subtle changes in structural arrangement and tissue composition. Experiments on ex vivo porcine skins burned at different temperatures were conducted for skin burn investigation. The burned depths estimated by PR and DOPU increase linearly with the burn temperature to a certain extent, which is helpful in classifying skin burn degrees. We also propose an algorithm of image fusion based on principal component analysis (PCA) to enhance tissue contrast for the multi-parameter data of PS-OCT imaging. The results show that the enhanced images generated by the PCA-based image fusion method have higher tissue contrast, compared to the en-face polarization images by traditional mean value projection. The proposed approaches in this study make it possible to assess skin burn severity and distinguish between burned and normal tissues.

MIL-88A(Al)/chitosan/graphene oxide composite aerogel with hierarchical porosity for enhanced radioactive iodine adsorption.

To ensure the sustainable development of the nuclear industry, the effective capture of radioiodine from nuclear wastewater has attracted much attention. Herein, a novel MIL-88A(Al)/chitosan/graphene oxide (MCG) composite aerogel was prepared by using crosslinked chitosan and graphene oxide as the 3D network skeleton, and MIL-88A(Al) nanocrystalline particles were introduced into the skeleton by freeze-drying method. MIL-88A(Al) adsorption capacities for volatile and soluble iodine were 2.02 g g-1 and 850.00 mg g-1, respectively. Owing to the synergistic effect of MIL-88A(Al), GO, CS, and the hierarchically porous structures of the MCG aerogel, the adsorption capacities for volatile and soluble iodine by the MCG aerogel were increased to 2.62 g g-1 and 1072.60 mg g-1, respectively. Furthermore, the adsorption performance of the MCG aerogel for volatile and soluble iodine could be maintained at 83 % and 82 % after 5 cycles, suggesting excellent recoverability. Meanwhile, the adsorption mechanism studies showed the interactions between iodine and NH, AlO, and CO in MCG aerogel. Furthermore, the adsorption process is consistent with the Elovich kinetic and Sips isotherm models. MCG aerogels are potential candidates for enhanced radioiodine adsorption due to their high radioiodine capture performance and excellent recyclability.