Ultratrace Aromatic Anhydride Dopant as Intermediate Island to Promote Charge Transfer of Graphitic Carbon Nitride for Enhancing the Photocatalytic Degradation of Rhodamine B.

In this work, 0.75 wt ‰ 2,3-pyridinedicarboxylic anhydride (PDA) as a novel dopant was utilized to obtain modified graphitic carbon nitride with ultratrace doping (3MCN-PDA3) by facile thermal polymerization. Characterization of the microstructure, surface state, and porosity properties of the samples indicated that 3MCN-PDA3 has a thinner sheet-like, larger-scale, and tighter lamellar stacking structure than that of pristine graphitic carbon nitride (3MCN). Based on photo/electrochemical analysis, the PDA dopant formed an extended coplanar conjugated system by anhydride-amine thermal condensation with heptazine rings, and the channels of amide covalent bonds and superconjugation of the solitary pair of electrons of the nitrogen atoms of PDA synergistically promoted the charge transport performance of 3MCN-PDA3. Under visible light, the photodegradation efficiency of Rhodamine B (RhB) over 3MCN-PDA3 reached 92.4% in 60 min and realized almost entire removal in 200 min (99.2%), 1.43 times that of 3MCN. Furthermore, the experimental results and generalized density theory calculations confirmed that PDA acts as an intermediate molecular island and constructs an efficient carrier transfer pathway between different heptazine units. The results indicate that PDA is a promising candidate to enhance the charge transfer performance through ultratrace doping in the large-scale preparation and application of the graphitic carbon nitride photocatalyst.

Amorphous Titanium Dioxide-Based Heterojunction with Locally Enhanced Electron Transport Multipathways for High-Efficient Photodegradation of Tetracycline.

A novel amorphous titanium dioxide (AT)-based heterojunction, composed of AT, silver bromide, and silver nanoparticles (Ag NPs), was synthesized and designated as AgBr/Ag/AT-4%. The band structure and active species of AgBr/Ag/AT-4% composites were investigated, and the existence of multiple electron transport pathways in the composites was determined. The Channel I is an all-solid-state Z-scheme heterostructure formed between AT and AgBr by Ag acting as an electron transport bridge, and Channel II is excited by the localized surface plasmon resonance effect induced by the Ag NPs on the photocatalyst surface. The Channel III is an electronically bridged medium with Ti3+/Ti4+ redox coupling pairs and oxygen vacancy-mediated trap states constructed from defective structures. The activity of the sample was assessed by the photocatalytic degradation of tetracycline. It is hoped that this work will provide a new idea for the preparation of an amorphous titanium dioxide-based heterojunction with locally enhanced electron transport multiple pathways.

The formation mechanism of the precursor film in high temperature molten metal systems: insight into structural disjoining pressure.

A precursor film is a unique microfluidic entity that arises at the liquid/solid interface. The formation mechanism of this entity in high-temperature systems is yet to be explained, mainly due to the limitations posed by the increased reaction at the solid/liquid interface. In this study, we investigate the formation process of the precursor film in high-temperature molten metal systems (Ag/Ni, Au/Ni, and Cu/Ni) using molecular dynamics simulations. The alloying energies for different alloying pairs were determined to extract the excess energy, which was found to be distributed from the interface to the upper liquid. The pattern of this energy distribution determines the shape of the near-surface liquid, including the precursor film. This relationship is further reflected by the structural disjoining pressure, which is the excess pressure exerted by the ordered microstructures within the wedge-shaped area of the droplet. Strong nonlinearity has been found in the structural disjoining pressure of Ag/Ni and Au/Ni systems, which is considered to be the main reason for the formation of the precursor film. The fluctuation of the dissolution rate is also reflected in the disjoining pressure, and the inhibition of dissolution on the precursor film formation is phenomenally clarified.

Coil Inductance Model Based Solenoid on⁻off Valve Spool Displacement Sensing via Laser Calibration.

Direct acting solenoid on⁻off valves are key fluid power components whose efficiency is dependent upon the state of the spool's axial motion. By sensing the trajectory of the valve spool, more efficient control schemes can be implemented. Therefore, the goal of this study is to derive an analytical model for spool displacement sensing based on coil inductance. First, a mathematical model of the coil inductance as a function of air gap width and lumped magnetic reluctance is derived. Second, to solve the inductance from coil current, an optimization to obtain an initial value based on physical constraints is proposed. Furthermore, an experiment using a laser triangulation sensor is designed to correlate the magnetic reluctance to the air gap. Lastly, using the obtained empirical reluctance model to eliminate unknowns from the proposed air gap-inductance model, the model in atmosphere or hydraulic oil environments was tested. Initial results showed that the proposed model is capable of calculating the spool displacement based on the coil current, and the estimation errors compared to the laser measurement are within ±7% in air environment.

Analysis of mRNA expression profiles of carotenogenesis and astaxanthin production of Haematococcus pluvialis under exogenous 2, 4-epibrassinolide (EBR).

The fresh-water green unicellular alga Haematococcus pluvialis is known to accumulate astaxanthin under stress conditions. In the present study, transcriptional expression of eight genes involved in astaxanthin biosynthesis exposed to EBR (25 and 50 mg/L) was analyzed using qRT-PCR. The results demonstrated that both 25 and 50 mg/L EBR could increase astaxanthin productivity and the eight carotenogenic genes were up-regulated by EBR with different expression profiles. Moreover, EBR25 induction had a greater influence on the transcriptional expression of ipi-1, ipi-2, crtR-B, lyc and crtO (> 5- fold up-regulation) than on psy, pds, bkt; EBR50 treatment had a greater effect on the transcriptional expression of ipi-2, pds, lyc, crtR-B, bkt and crtO than on ipi-1 and psy. Furthermore, astaxanthin biosynthesis under EBR was up-regulated mainly by ipi1Ö¾ and psy at the post-transcriptional level, pds, lyc, crtR-B, bkt and crtO at the transcriptional level and ipi-2 at both levels.

Analysis of mRNA expression profiles of carotenogenesis and astaxanthin production of Haematococcus pluvialis under exogenous 2, 4-epibrassinolide (EBR)

The fresh-water green unicellular alga Haematococcus pluvialis is known to accumulate astaxanthin under stress conditions. In the present study, transcriptional expression of eight genes involved in astaxanthin biosynthesis exposed to EBR (25 and 50 mg/L) was analyzed using qRT-PCR. The results demonstrated that both 25 and 50 mg/L EBR could increase astaxanthin productivity and the eight carotenogenic genes were up-regulated by EBR with different expression profiles. Moreover, EBR25 induction had a greater influence on the transcriptional expression of ipi-1, ipi-2, crtR-B, lyc and crtO (> 5- fold up-regulation) than on psy, pds, bkt; EBR50 treatment had a greater effect on the transcriptional expression of ipi-2, pds, lyc, crtR-B, bkt and crtO than on ipi-1 and psy. Furthermore, astaxanthin biosynthesis under EBR was up-regulated mainly by ipi1־ and psy at the post-transcriptional level, pds, lyc, crtR-B, bkt and crtO at the transcriptional level and ipi-2 at both levels.